#define USB_VENDOR_GENESYS_LOGIC 0x05e3
#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
-static inline int hub_is_superspeed(struct usb_device *hdev)
-{
- return (hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS);
-}
-
/* Protect struct usb_device->state and ->children members
* Note: Both are also protected by ->dev.sem, except that ->state can
* change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
static struct task_struct *khubd_task;
+/* synchronize hub-port add/remove and peering operations */
+DEFINE_MUTEX(usb_port_peer_mutex);
+
/* cycle leds on hubs that aren't blinking for attention */
static bool blinkenlights = 0;
module_param (blinkenlights, bool, S_IRUGO);
NULL, 0, 1000);
}
+static char *to_led_name(int selector)
+{
+ switch (selector) {
+ case HUB_LED_AMBER:
+ return "amber";
+ case HUB_LED_GREEN:
+ return "green";
+ case HUB_LED_OFF:
+ return "off";
+ case HUB_LED_AUTO:
+ return "auto";
+ default:
+ return "??";
+ }
+}
+
/*
* USB 2.0 spec Section 11.24.2.7.1.10 and table 11-7
* for info about using port indicators
*/
-static void set_port_led(
- struct usb_hub *hub,
- int port1,
- int selector
-)
+static void set_port_led(struct usb_hub *hub, int port1, int selector)
{
- int status = set_port_feature(hub->hdev, (selector << 8) | port1,
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ int status;
+
+ status = set_port_feature(hub->hdev, (selector << 8) | port1,
USB_PORT_FEAT_INDICATOR);
- if (status < 0)
- dev_dbg (hub->intfdev,
- "port %d indicator %s status %d\n",
- port1,
- ({ char *s; switch (selector) {
- case HUB_LED_AMBER: s = "amber"; break;
- case HUB_LED_GREEN: s = "green"; break;
- case HUB_LED_OFF: s = "off"; break;
- case HUB_LED_AUTO: s = "auto"; break;
- default: s = "??"; break;
- } s; }),
- status);
+ dev_dbg(&port_dev->dev, "indicator %s status %d\n",
+ to_led_name(selector), status);
}
#define LED_CYCLE_PERIOD ((2*HZ)/3)
int port1, bool set)
{
int ret;
- struct usb_port *port_dev = hub->ports[port1 - 1];
if (set)
ret = set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
else
ret = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
- if (!ret)
- port_dev->power_is_on = set;
- return ret;
+ if (ret)
+ return ret;
+
+ if (set)
+ set_bit(port1, hub->power_bits);
+ else
+ clear_bit(port1, hub->power_bits);
+ return 0;
}
/**
}
EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
-/* If do_delay is false, return the number of milliseconds the caller
- * needs to delay.
- */
-static unsigned hub_power_on(struct usb_hub *hub, bool do_delay)
+static void hub_power_on(struct usb_hub *hub, bool do_delay)
{
int port1;
- unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2;
- unsigned delay;
- u16 wHubCharacteristics =
- le16_to_cpu(hub->descriptor->wHubCharacteristics);
/* Enable power on each port. Some hubs have reserved values
* of LPSM (> 2) in their descriptors, even though they are
* but only emulate it. In all cases, the ports won't work
* unless we send these messages to the hub.
*/
- if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2)
+ if (hub_is_port_power_switchable(hub))
dev_dbg(hub->intfdev, "enabling power on all ports\n");
else
dev_dbg(hub->intfdev, "trying to enable port power on "
"non-switchable hub\n");
for (port1 = 1; port1 <= hub->hdev->maxchild; port1++)
- if (hub->ports[port1 - 1]->power_is_on)
+ if (test_bit(port1, hub->power_bits))
set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER);
else
usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_POWER);
-
- /* Wait at least 100 msec for power to become stable */
- delay = max(pgood_delay, (unsigned) 100);
if (do_delay)
- msleep(delay);
- return delay;
+ msleep(hub_power_on_good_delay(hub));
}
static int hub_hub_status(struct usb_hub *hub,
msleep(HUB_DEBOUNCE_STEP);
}
if (total_time >= HUB_DEBOUNCE_TIMEOUT)
- dev_warn(hub->intfdev, "Could not disable port %d after %d ms\n",
- port1, total_time);
+ dev_warn(&hub->ports[port1 - 1]->dev,
+ "Could not disable after %d ms\n", total_time);
return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT);
}
static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
{
+ struct usb_port *port_dev = hub->ports[port1 - 1];
struct usb_device *hdev = hub->hdev;
int ret = 0;
- if (hub->ports[port1 - 1]->child && set_state)
- usb_set_device_state(hub->ports[port1 - 1]->child,
- USB_STATE_NOTATTACHED);
+ if (port_dev->child && set_state)
+ usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
if (!hub->error) {
if (hub_is_superspeed(hub->hdev))
ret = hub_usb3_port_disable(hub, port1);
USB_PORT_FEAT_ENABLE);
}
if (ret && ret != -ENODEV)
- dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
- port1, ret);
+ dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
return ret;
}
*/
static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
{
- dev_dbg(hub->intfdev, "logical disconnect on port %d\n", port1);
+ dev_dbg(&hub->ports[port1 - 1]->dev, "logical disconnect\n");
hub_port_disable(hub, port1, 1);
/* FIXME let caller ask to power down the port:
* for HUB_POST_RESET, but it's easier not to.
*/
if (type == HUB_INIT) {
- delay = hub_power_on(hub, false);
+ unsigned delay = hub_power_on_good_delay(hub);
+
+ hub_power_on(hub, false);
INIT_DELAYED_WORK(&hub->init_work, hub_init_func2);
queue_delayed_work(system_power_efficient_wq,
&hub->init_work,
}
init2:
- /* Check each port and set hub->change_bits to let khubd know
+ /*
+ * Check each port and set hub->change_bits to let khubd know
* which ports need attention.
*/
for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
- struct usb_device *udev = hub->ports[port1 - 1]->child;
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *udev = port_dev->child;
u16 portstatus, portchange;
portstatus = portchange = 0;
status = hub_port_status(hub, port1, &portstatus, &portchange);
if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
- dev_dbg(hub->intfdev,
- "port %d: status %04x change %04x\n",
- port1, portstatus, portchange);
+ dev_dbg(&port_dev->dev, "status %04x change %04x\n",
+ portstatus, portchange);
- /* After anything other than HUB_RESUME (i.e., initialization
+ /*
+ * After anything other than HUB_RESUME (i.e., initialization
* or any sort of reset), every port should be disabled.
* Unconnected ports should likewise be disabled (paranoia),
* and so should ports for which we have no usb_device.
set_bit(port1, hub->change_bits);
} else if (udev->persist_enabled) {
- struct usb_port *port_dev = hub->ports[port1 - 1];
-
#ifdef CONFIG_PM
udev->reset_resume = 1;
#endif
/* Don't set the change_bits when the device
* was powered off.
*/
- if (port_dev->power_is_on)
+ if (test_bit(port1, hub->power_bits))
set_bit(port1, hub->change_bits);
} else {
flush_work(&hub->tt.clear_work);
}
+static void hub_pm_barrier_for_all_ports(struct usb_hub *hub)
+{
+ int i;
+
+ for (i = 0; i < hub->hdev->maxchild; ++i)
+ pm_runtime_barrier(&hub->ports[i]->dev);
+}
+
/* caller has locked the hub device */
static int hub_pre_reset(struct usb_interface *intf)
{
struct usb_hub *hub = usb_get_intfdata(intf);
hub_quiesce(hub, HUB_PRE_RESET);
+ hub->in_reset = 1;
+ hub_pm_barrier_for_all_ports(hub);
return 0;
}
{
struct usb_hub *hub = usb_get_intfdata(intf);
+ hub->in_reset = 0;
+ hub_pm_barrier_for_all_ports(hub);
hub_activate(hub, HUB_POST_RESET);
return 0;
}
char *message = "out of memory";
unsigned unit_load;
unsigned full_load;
+ unsigned maxchild;
hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL);
if (!hub->buffer) {
goto fail;
}
- hdev->maxchild = hub->descriptor->bNbrPorts;
- dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild,
- (hdev->maxchild == 1) ? "" : "s");
+ maxchild = hub->descriptor->bNbrPorts;
+ dev_info(hub_dev, "%d port%s detected\n", maxchild,
+ (maxchild == 1) ? "" : "s");
- hub->ports = kzalloc(hdev->maxchild * sizeof(struct usb_port *),
- GFP_KERNEL);
+ hub->ports = kzalloc(maxchild * sizeof(struct usb_port *), GFP_KERNEL);
if (!hub->ports) {
ret = -ENOMEM;
goto fail;
int i;
char portstr[USB_MAXCHILDREN + 1];
- for (i = 0; i < hdev->maxchild; i++)
+ for (i = 0; i < maxchild; i++)
portstr[i] = hub->descriptor->u.hs.DeviceRemovable
[((i + 1) / 8)] & (1 << ((i + 1) % 8))
? 'F' : 'R';
- portstr[hdev->maxchild] = 0;
+ portstr[maxchild] = 0;
dev_dbg(hub_dev, "compound device; port removable status: %s\n", portstr);
} else
dev_dbg(hub_dev, "standalone hub\n");
if (hcd->power_budget > 0)
hdev->bus_mA = hcd->power_budget;
else
- hdev->bus_mA = full_load * hdev->maxchild;
+ hdev->bus_mA = full_load * maxchild;
if (hdev->bus_mA >= full_load)
hub->mA_per_port = full_load;
else {
hub->descriptor->bHubContrCurrent);
hub->limited_power = 1;
- if (remaining < hdev->maxchild * unit_load)
+ if (remaining < maxchild * unit_load)
dev_warn(hub_dev,
"insufficient power available "
"to use all downstream ports\n");
if (hub->has_indicators && blinkenlights)
hub->indicator[0] = INDICATOR_CYCLE;
- for (i = 0; i < hdev->maxchild; i++) {
+ mutex_lock(&usb_port_peer_mutex);
+ for (i = 0; i < maxchild; i++) {
ret = usb_hub_create_port_device(hub, i + 1);
if (ret < 0) {
dev_err(hub->intfdev,
"couldn't create port%d device.\n", i + 1);
- hdev->maxchild = i;
- goto fail_keep_maxchild;
+ break;
}
}
+ hdev->maxchild = i;
+ mutex_unlock(&usb_port_peer_mutex);
+ if (ret < 0)
+ goto fail;
usb_hub_adjust_deviceremovable(hdev, hub->descriptor);
return 0;
fail:
- hdev->maxchild = 0;
-fail_keep_maxchild:
dev_err (hub_dev, "config failed, %s (err %d)\n",
message, ret);
/* hub_disconnect() frees urb and descriptor */
hub->error = 0;
hub_quiesce(hub, HUB_DISCONNECT);
+ mutex_lock(&usb_port_peer_mutex);
+
/* Avoid races with recursively_mark_NOTATTACHED() */
spin_lock_irq(&device_state_lock);
port1 = hdev->maxchild;
for (; port1 > 0; --port1)
usb_hub_remove_port_device(hub, port1);
+ mutex_unlock(&usb_port_peer_mutex);
+
if (hub->hdev->speed == USB_SPEED_HIGH)
highspeed_hubs--;
usb_hcd_synchronize_unlinks(udev);
if (udev->parent) {
+ int port1 = udev->portnum;
struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
- struct usb_port *port_dev = hub->ports[udev->portnum - 1];
+ struct usb_port *port_dev = hub->ports[port1 - 1];
sysfs_remove_link(&udev->dev.kobj, "port");
sysfs_remove_link(&port_dev->dev.kobj, "device");
- if (!port_dev->did_runtime_put)
+ if (test_and_clear_bit(port1, hub->child_usage_bits))
pm_runtime_put(&port_dev->dev);
- else
- port_dev->did_runtime_put = false;
}
usb_remove_ep_devs(&udev->ep0);
udev->removable = USB_DEVICE_REMOVABLE;
else
udev->removable = USB_DEVICE_FIXED;
+
+ /*
+ * Platform firmware may have populated an alternative value for
+ * removable. If the parent port has a known connect_type use
+ * that instead.
+ */
+ switch (hub->ports[udev->portnum - 1]->connect_type) {
+ case USB_PORT_CONNECT_TYPE_HOT_PLUG:
+ udev->removable = USB_DEVICE_REMOVABLE;
+ break;
+ case USB_PORT_CONNECT_TYPE_HARD_WIRED:
+ udev->removable = USB_DEVICE_FIXED;
+ break;
+ default: /* use what was set above */
+ break;
+ }
}
/**
device_enable_async_suspend(&udev->dev);
- /*
- * check whether the hub marks this port as non-removable. Do it
- * now so that platform-specific data can override it in
- * device_add()
- */
+ /* check whether the hub or firmware marks this port as non-removable */
if (udev->parent)
set_usb_port_removable(udev);
/* Create link files between child device and usb port device. */
if (udev->parent) {
struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
- struct usb_port *port_dev = hub->ports[udev->portnum - 1];
+ int port1 = udev->portnum;
+ struct usb_port *port_dev = hub->ports[port1 - 1];
err = sysfs_create_link(&udev->dev.kobj,
&port_dev->dev.kobj, "port");
goto fail;
}
- pm_runtime_get_sync(&port_dev->dev);
+ if (!test_and_set_bit(port1, hub->child_usage_bits))
+ pm_runtime_get_sync(&port_dev->dev);
}
(void) usb_create_ep_devs(&udev->dev, &udev->ep0, udev);
if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
delay = HUB_LONG_RESET_TIME;
- dev_dbg (hub->intfdev,
- "port %d not %sreset yet, waiting %dms\n",
- port1, warm ? "warm " : "", delay);
+ dev_dbg(&hub->ports[port1 - 1]->dev,
+ "not %sreset yet, waiting %dms\n",
+ warm ? "warm " : "", delay);
}
if ((portstatus & USB_PORT_STAT_RESET))
{
int i, status;
u16 portchange, portstatus;
+ struct usb_port *port_dev = hub->ports[port1 - 1];
if (!hub_is_superspeed(hub->hdev)) {
if (warm) {
if (status == -ENODEV) {
; /* The hub is gone */
} else if (status) {
- dev_err(hub->intfdev,
- "cannot %sreset port %d (err = %d)\n",
- warm ? "warm " : "", port1, status);
+ dev_err(&port_dev->dev,
+ "cannot %sreset (err = %d)\n",
+ warm ? "warm " : "", status);
} else {
status = hub_port_wait_reset(hub, port1, udev, delay,
warm);
* hot or warm reset failed. Try another warm reset.
*/
if (!warm) {
- dev_dbg(hub->intfdev, "hot reset failed, warm reset port %d\n",
- port1);
+ dev_dbg(&port_dev->dev,
+ "hot reset failed, warm reset\n");
warm = true;
}
}
- dev_dbg (hub->intfdev,
- "port %d not enabled, trying %sreset again...\n",
- port1, warm ? "warm " : "");
+ dev_dbg(&port_dev->dev,
+ "not enabled, trying %sreset again...\n",
+ warm ? "warm " : "");
delay = HUB_LONG_RESET_TIME;
}
- dev_err (hub->intfdev,
- "Cannot enable port %i. Maybe the USB cable is bad?\n",
- port1);
+ dev_err(&port_dev->dev, "Cannot enable. Maybe the USB cable is bad?\n");
done:
if (!hub_is_superspeed(hub->hdev))
struct usb_hub *hub, int port1,
int status, unsigned portchange, unsigned portstatus)
{
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+
/* Is the device still present? */
if (status || port_is_suspended(hub, portstatus) ||
!port_is_power_on(hub, portstatus) ||
}
if (status) {
- dev_dbg(hub->intfdev,
- "port %d status %04x.%04x after resume, %d\n",
- port1, portchange, portstatus, status);
+ dev_dbg(&port_dev->dev, "status %04x.%04x after resume, %d\n",
+ portchange, portstatus, status);
} else if (udev->reset_resume) {
/* Late port handoff can set status-change bits */
status = 0;
}
if (status) {
- dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n",
- port1, status);
+ dev_dbg(&port_dev->dev, "can't suspend, status %d\n", status);
/* Try to enable USB3 LPM and LTM again */
usb_unlocked_enable_lpm(udev);
usb_set_device_state(udev, USB_STATE_SUSPENDED);
}
- if (status == 0 && !udev->do_remote_wakeup && udev->persist_enabled) {
+ if (status == 0 && !udev->do_remote_wakeup && udev->persist_enabled
+ && test_and_clear_bit(port1, hub->child_usage_bits))
pm_runtime_put_sync(&port_dev->dev);
- port_dev->did_runtime_put = true;
- }
usb_mark_last_busy(hub->hdev);
return status;
int status;
u16 portchange, portstatus;
- if (port_dev->did_runtime_put) {
+ if (!test_and_set_bit(port1, hub->child_usage_bits)) {
status = pm_runtime_get_sync(&port_dev->dev);
- port_dev->did_runtime_put = false;
if (status < 0) {
dev_dbg(&udev->dev, "can't resume usb port, status %d\n",
status);
if (status == 0 && !port_is_suspended(hub, portstatus))
goto SuspendCleared;
- /* dev_dbg(hub->intfdev, "resume port %d\n", port1); */
-
set_bit(port1, hub->busy_bits);
/* see 7.1.7.7; affects power usage, but not budgeting */
status = usb_clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_SUSPEND);
if (status) {
- dev_dbg(hub->intfdev, "can't resume port %d, status %d\n",
- port1, status);
+ dev_dbg(&port_dev->dev, "can't resume, status %d\n", status);
} else {
/* drive resume for at least 20 msec */
dev_dbg(&udev->dev, "usb %sresume\n",
*/
hub->wakeup_enabled_descendants = 0;
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
- struct usb_device *udev;
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *udev = port_dev->child;
- udev = hub->ports[port1 - 1]->child;
if (udev && udev->can_submit) {
- dev_warn(&intf->dev, "port %d not suspended yet\n",
- port1);
+ dev_warn(&port_dev->dev, "not suspended yet\n");
if (PMSG_IS_AUTO(msg))
return -EBUSY;
}
int hub_port_debounce(struct usb_hub *hub, int port1, bool must_be_connected)
{
int ret;
- int total_time, stable_time = 0;
u16 portchange, portstatus;
unsigned connection = 0xffff;
+ int total_time, stable_time = 0;
+ struct usb_port *port_dev = hub->ports[port1 - 1];
for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
ret = hub_port_status(hub, port1, &portstatus, &portchange);
msleep(HUB_DEBOUNCE_STEP);
}
- dev_dbg (hub->intfdev,
- "debounce: port %d: total %dms stable %dms status 0x%x\n",
- port1, total_time, stable_time, portstatus);
+ dev_dbg(&port_dev->dev, "debounce total %dms stable %dms status 0x%x\n",
+ total_time, stable_time, portstatus);
if (stable_time < HUB_DEBOUNCE_STABLE)
return -ETIMEDOUT;
*/
static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
{
- int connect_type;
+ struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+ int connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN;
if (!udev->usb2_hw_lpm_capable)
return;
- connect_type = usb_get_hub_port_connect_type(udev->parent,
- udev->portnum);
+ if (hub)
+ connect_type = hub->ports[udev->portnum - 1]->connect_type;
if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) ||
connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
int retry_counter)
{
- static DEFINE_MUTEX(usb_address0_mutex);
-
struct usb_device *hdev = hub->hdev;
struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
int i, j, retval;
if (oldspeed == USB_SPEED_LOW)
delay = HUB_LONG_RESET_TIME;
- mutex_lock(&usb_address0_mutex);
+ mutex_lock(&hdev->bus->usb_address0_mutex);
/* Reset the device; full speed may morph to high speed */
/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
hub_port_disable(hub, port1, 0);
update_devnum(udev, devnum); /* for disconnect processing */
}
- mutex_unlock(&usb_address0_mutex);
+ mutex_unlock(&hdev->bus->usb_address0_mutex);
return retval;
}
remaining = hdev->bus_mA - hub->descriptor->bHubContrCurrent;
for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
- struct usb_device *udev = hub->ports[port1 - 1]->child;
- int delta;
- unsigned unit_load;
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *udev = port_dev->child;
+ unsigned unit_load;
+ int delta;
if (!udev)
continue;
else
delta = 8;
if (delta > hub->mA_per_port)
- dev_warn(&udev->dev,
- "%dmA is over %umA budget for port %d!\n",
- delta, hub->mA_per_port, port1);
+ dev_warn(&port_dev->dev, "%dmA is over %umA budget!\n",
+ delta, hub->mA_per_port);
remaining -= delta;
}
if (remaining < 0) {
u16 portstatus, u16 portchange)
{
struct usb_device *hdev = hub->hdev;
- struct device *hub_dev = hub->intfdev;
struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
- unsigned wHubCharacteristics =
- le16_to_cpu(hub->descriptor->wHubCharacteristics);
+ struct usb_port *port_dev = hub->ports[port1 - 1];
struct usb_device *udev;
int status, i;
unsigned unit_load;
- dev_dbg (hub_dev,
- "port %d, status %04x, change %04x, %s\n",
- port1, portstatus, portchange, portspeed(hub, portstatus));
+ dev_dbg(&port_dev->dev, "status %04x, change %04x, %s\n",
+ portstatus, portchange, portspeed(hub, portstatus));
if (hub->has_indicators) {
set_port_led(hub, port1, HUB_LED_AUTO);
#endif
/* Try to resuscitate an existing device */
- udev = hub->ports[port1 - 1]->child;
+ udev = port_dev->child;
if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
udev->state != USB_STATE_NOTATTACHED) {
usb_lock_device(udev);
if (hcd->phy && !hdev->parent &&
!(portstatus & USB_PORT_STAT_CONNECTION))
usb_phy_notify_disconnect(hcd->phy, udev->speed);
- usb_disconnect(&hub->ports[port1 - 1]->child);
+ usb_disconnect(&port_dev->child);
}
clear_bit(port1, hub->change_bits);
status = hub_port_debounce_be_stable(hub, port1);
if (status < 0) {
if (status != -ENODEV && printk_ratelimit())
- dev_err(hub_dev, "connect-debounce failed, "
- "port %d disabled\n", port1);
+ dev_err(&port_dev->dev,
+ "connect-debounce failed\n");
portstatus &= ~USB_PORT_STAT_CONNECTION;
} else {
portstatus = status;
test_bit(port1, hub->removed_bits)) {
/* maybe switch power back on (e.g. root hub was reset) */
- if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
+ if (hub_is_port_power_switchable(hub)
&& !port_is_power_on(hub, portstatus))
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
*/
udev = usb_alloc_dev(hdev, hdev->bus, port1);
if (!udev) {
- dev_err (hub_dev,
- "couldn't allocate port %d usb_device\n",
- port1);
+ dev_err(&port_dev->dev,
+ "couldn't allocate usb_device\n");
goto done;
}
*/
status = 0;
+ mutex_lock(&usb_port_peer_mutex);
+
/* We mustn't add new devices if the parent hub has
* been disconnected; we would race with the
* recursively_mark_NOTATTACHED() routine.
if (hdev->state == USB_STATE_NOTATTACHED)
status = -ENOTCONN;
else
- hub->ports[port1 - 1]->child = udev;
+ port_dev->child = udev;
spin_unlock_irq(&device_state_lock);
+ mutex_unlock(&usb_port_peer_mutex);
/* Run it through the hoops (find a driver, etc) */
if (!status) {
status = usb_new_device(udev);
if (status) {
+ mutex_lock(&usb_port_peer_mutex);
spin_lock_irq(&device_state_lock);
- hub->ports[port1 - 1]->child = NULL;
+ port_dev->child = NULL;
spin_unlock_irq(&device_state_lock);
+ mutex_unlock(&usb_port_peer_mutex);
}
}
status = hub_power_remaining(hub);
if (status)
- dev_dbg(hub_dev, "%dmA power budget left\n", status);
+ dev_dbg(hub->intfdev, "%dmA power budget left\n", status);
return;
!hcd->driver->port_handed_over ||
!(hcd->driver->port_handed_over)(hcd, port1)) {
if (status != -ENOTCONN && status != -ENODEV)
- dev_err(hub_dev, "unable to enumerate USB device on port %d\n",
- port1);
+ dev_err(&port_dev->dev,
+ "unable to enumerate USB device\n");
}
done:
static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
u16 portstatus, u16 portchange)
{
+ struct usb_port *port_dev = hub->ports[port - 1];
struct usb_device *hdev;
struct usb_device *udev;
int connect_change = 0;
int ret;
hdev = hub->hdev;
- udev = hub->ports[port - 1]->child;
+ udev = port_dev->child;
if (!hub_is_superspeed(hdev)) {
if (!(portchange & USB_PORT_STAT_C_SUSPEND))
return 0;
ret = -ENODEV;
hub_port_disable(hub, port, 1);
}
- dev_dbg(hub->intfdev, "resume on port %d, status %d\n",
- port, ret);
+ dev_dbg(&port_dev->dev, "resume, status %d\n", ret);
return connect_change;
}
/* deal with port status changes */
for (i = 1; i <= hdev->maxchild; i++) {
- struct usb_device *udev = hub->ports[i - 1]->child;
+ struct usb_port *port_dev = hub->ports[i - 1];
+ struct usb_device *udev = port_dev->child;
if (test_bit(i, hub->busy_bits))
continue;
if (portchange & USB_PORT_STAT_C_ENABLE) {
if (!connect_change)
- dev_dbg (hub_dev,
- "port %d enable change, "
- "status %08x\n",
- i, portstatus);
+ dev_dbg(&port_dev->dev,
+ "enable change, status %08x\n",
+ portstatus);
usb_clear_port_feature(hdev, i,
USB_PORT_FEAT_C_ENABLE);
* Works at least with mouse driver.
*/
if (!(portstatus & USB_PORT_STAT_ENABLE)
- && !connect_change
- && hub->ports[i - 1]->child) {
- dev_err (hub_dev,
- "port %i "
- "disabled by hub (EMI?), "
- "re-enabling...\n",
- i);
+ && !connect_change && udev) {
+ dev_err(&port_dev->dev,
+ "disabled by hub (EMI?), re-enabling...\n");
connect_change = 1;
}
}
u16 status = 0;
u16 unused;
- dev_dbg(hub_dev, "over-current change on port "
- "%d\n", i);
+ dev_dbg(&port_dev->dev, "over-current change\n");
usb_clear_port_feature(hdev, i,
USB_PORT_FEAT_C_OVER_CURRENT);
msleep(100); /* Cool down */
hub_power_on(hub, true);
hub_port_status(hub, i, &status, &unused);
if (status & USB_PORT_STAT_OVERCURRENT)
- dev_err(hub_dev, "over-current "
- "condition on port %d\n", i);
+ dev_err(&port_dev->dev,
+ "over-current condition\n");
}
if (portchange & USB_PORT_STAT_C_RESET) {
- dev_dbg (hub_dev,
- "reset change on port %d\n",
- i);
+ dev_dbg(&port_dev->dev, "reset change\n");
usb_clear_port_feature(hdev, i,
USB_PORT_FEAT_C_RESET);
}
if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
hub_is_superspeed(hub->hdev)) {
- dev_dbg(hub_dev,
- "warm reset change on port %d\n",
- i);
+ dev_dbg(&port_dev->dev, "warm reset change\n");
usb_clear_port_feature(hdev, i,
USB_PORT_FEAT_C_BH_PORT_RESET);
}
USB_PORT_FEAT_C_PORT_LINK_STATE);
}
if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) {
- dev_warn(hub_dev,
- "config error on port %d\n",
- i);
+ dev_warn(&port_dev->dev, "config error\n");
usb_clear_port_feature(hub->hdev, i,
USB_PORT_FEAT_C_PORT_CONFIG_ERROR);
}
if (hub_port_warm_reset_required(hub, portstatus)) {
int status;
- dev_dbg(hub_dev, "warm reset port %d\n", i);
+ dev_dbg(&port_dev->dev, "warm reset\n");
if (!udev ||
!(portstatus & USB_PORT_STAT_CONNECTION) ||
udev->state == USB_STATE_NOTATTACHED) {
}
EXPORT_SYMBOL_GPL(usb_hub_find_child);
-/**
- * usb_set_hub_port_connect_type - set hub port connect type.
- * @hdev: USB device belonging to the usb hub
- * @port1: port num of the port
- * @type: connect type of the port
- */
-void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1,
- enum usb_port_connect_type type)
-{
- struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
-
- if (hub)
- hub->ports[port1 - 1]->connect_type = type;
-}
-
-/**
- * usb_get_hub_port_connect_type - Get the port's connect type
- * @hdev: USB device belonging to the usb hub
- * @port1: port num of the port
- *
- * Return: The connect type of the port if successful. Or
- * USB_PORT_CONNECT_TYPE_UNKNOWN if input params are invalid.
- */
-enum usb_port_connect_type
-usb_get_hub_port_connect_type(struct usb_device *hdev, int port1)
-{
- struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
-
- if (!hub)
- return USB_PORT_CONNECT_TYPE_UNKNOWN;
-
- return hub->ports[port1 - 1]->connect_type;
-}
-
void usb_hub_adjust_deviceremovable(struct usb_device *hdev,
struct usb_hub_descriptor *desc)
{
+ struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
enum usb_port_connect_type connect_type;
int i;
+ if (!hub)
+ return;
+
if (!hub_is_superspeed(hdev)) {
for (i = 1; i <= hdev->maxchild; i++) {
- connect_type = usb_get_hub_port_connect_type(hdev, i);
+ struct usb_port *port_dev = hub->ports[i - 1];
+ connect_type = port_dev->connect_type;
if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
u8 mask = 1 << (i%8);
if (!(desc->u.hs.DeviceRemovable[i/8] & mask)) {
- dev_dbg(&hdev->dev, "usb port%d's DeviceRemovable is changed to 1 according to platform information.\n",
- i);
+ dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n");
desc->u.hs.DeviceRemovable[i/8] |= mask;
}
}
u16 port_removable = le16_to_cpu(desc->u.ss.DeviceRemovable);
for (i = 1; i <= hdev->maxchild; i++) {
- connect_type = usb_get_hub_port_connect_type(hdev, i);
+ struct usb_port *port_dev = hub->ports[i - 1];
+ connect_type = port_dev->connect_type;
if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
u16 mask = 1 << i;
if (!(port_removable & mask)) {
- dev_dbg(&hdev->dev, "usb port%d's DeviceRemovable is changed to 1 according to platform information.\n",
- i);
+ dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n");
port_removable |= mask;
}
}
projects / karo-tx-linux.git / blobdiff