*
*
*/
-
#ifndef _LINUX_CYCLADES_H
#define _LINUX_CYCLADES_H
-#include <linux/types.h>
-
-struct cyclades_monitor {
- unsigned long int_count;
- unsigned long char_count;
- unsigned long char_max;
- unsigned long char_last;
-};
-
-/*
- * These stats all reflect activity since the device was last initialized.
- * (i.e., since the port was opened with no other processes already having it
- * open)
- */
-struct cyclades_idle_stats {
- __kernel_time_t in_use; /* Time device has been in use (secs) */
- __kernel_time_t recv_idle; /* Time since last char received (secs) */
- __kernel_time_t xmit_idle; /* Time since last char transmitted (secs) */
- unsigned long recv_bytes; /* Bytes received */
- unsigned long xmit_bytes; /* Bytes transmitted */
- unsigned long overruns; /* Input overruns */
- unsigned long frame_errs; /* Input framing errors */
- unsigned long parity_errs; /* Input parity errors */
-};
-
-#define CYCLADES_MAGIC 0x4359
-
-#define CYGETMON 0x435901
-#define CYGETTHRESH 0x435902
-#define CYSETTHRESH 0x435903
-#define CYGETDEFTHRESH 0x435904
-#define CYSETDEFTHRESH 0x435905
-#define CYGETTIMEOUT 0x435906
-#define CYSETTIMEOUT 0x435907
-#define CYGETDEFTIMEOUT 0x435908
-#define CYSETDEFTIMEOUT 0x435909
-#define CYSETRFLOW 0x43590a
-#define CYGETRFLOW 0x43590b
-#define CYSETRTSDTR_INV 0x43590c
-#define CYGETRTSDTR_INV 0x43590d
-#define CYZSETPOLLCYCLE 0x43590e
-#define CYZGETPOLLCYCLE 0x43590f
-#define CYGETCD1400VER 0x435910
-#define CYSETWAIT 0x435912
-#define CYGETWAIT 0x435913
-
-/*************** CYCLOM-Z ADDITIONS ***************/
-
-#define CZIOC ('M' << 8)
-#define CZ_NBOARDS (CZIOC|0xfa)
-#define CZ_BOOT_START (CZIOC|0xfb)
-#define CZ_BOOT_DATA (CZIOC|0xfc)
-#define CZ_BOOT_END (CZIOC|0xfd)
-#define CZ_TEST (CZIOC|0xfe)
-
-#define CZ_DEF_POLL (HZ/25)
-
-#define MAX_BOARD 4 /* Max number of boards */
-#define MAX_DEV 256 /* Max number of ports total */
-#define CYZ_MAX_SPEED 921600
-
-#define CYZ_FIFO_SIZE 16
-
-#define CYZ_BOOT_NWORDS 0x100
-struct CYZ_BOOT_CTRL {
- unsigned short nboard;
- int status[MAX_BOARD];
- int nchannel[MAX_BOARD];
- int fw_rev[MAX_BOARD];
- unsigned long offset;
- unsigned long data[CYZ_BOOT_NWORDS];
-};
-
-
-#ifndef DP_WINDOW_SIZE
-/*
- * Memory Window Sizes
- */
-
-#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */
-#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and
- 8Zo V.2 */
-#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */
-
-/*
- * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
- * normally will access only interested on the fpga_id, fpga_version,
- * start_cpu and stop_cpu.
- */
-
-struct CUSTOM_REG {
- __u32 fpga_id; /* FPGA Identification Register */
- __u32 fpga_version; /* FPGA Version Number Register */
- __u32 cpu_start; /* CPU start Register (write) */
- __u32 cpu_stop; /* CPU stop Register (write) */
- __u32 misc_reg; /* Miscellaneous Register */
- __u32 idt_mode; /* IDT mode Register */
- __u32 uart_irq_status; /* UART IRQ status Register */
- __u32 clear_timer0_irq; /* Clear timer interrupt Register */
- __u32 clear_timer1_irq; /* Clear timer interrupt Register */
- __u32 clear_timer2_irq; /* Clear timer interrupt Register */
- __u32 test_register; /* Test Register */
- __u32 test_count; /* Test Count Register */
- __u32 timer_select; /* Timer select register */
- __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
- __u32 ram_wait_state; /* RAM wait-state Register */
- __u32 uart_wait_state; /* UART wait-state Register */
- __u32 timer_wait_state; /* timer wait-state Register */
- __u32 ack_wait_state; /* ACK wait State Register */
-};
-
-/*
- * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
- * registers. This structure can be used to access the 9060 registers
- * (memory mapped).
- */
-
-struct RUNTIME_9060 {
- __u32 loc_addr_range; /* 00h - Local Address Range */
- __u32 loc_addr_base; /* 04h - Local Address Base */
- __u32 loc_arbitr; /* 08h - Local Arbitration */
- __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */
- __u32 loc_rom_range; /* 10h - Local ROM Range */
- __u32 loc_rom_base; /* 14h - Local ROM Base */
- __u32 loc_bus_descr; /* 18h - Local Bus descriptor */
- __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */
- __u32 loc_base_mst; /* 20h - Local Base for Master PCI */
- __u32 loc_range_io; /* 24h - Local Range for Master IO */
- __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */
- __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */
- __u32 filler1; /* 30h */
- __u32 filler2; /* 34h */
- __u32 filler3; /* 38h */
- __u32 filler4; /* 3Ch */
- __u32 mail_box_0; /* 40h - Mail Box 0 */
- __u32 mail_box_1; /* 44h - Mail Box 1 */
- __u32 mail_box_2; /* 48h - Mail Box 2 */
- __u32 mail_box_3; /* 4Ch - Mail Box 3 */
- __u32 filler5; /* 50h */
- __u32 filler6; /* 54h */
- __u32 filler7; /* 58h */
- __u32 filler8; /* 5Ch */
- __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */
- __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */
- __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */
- __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
-};
-
-/* Values for the Local Base Address re-map register */
-
-#define WIN_RAM 0x00000001L /* set the sliding window to RAM */
-#define WIN_CREG 0x14000001L /* set the window to custom Registers */
-
-/* Values timer select registers */
-
-#define TIMER_BY_1M 0x00 /* clock divided by 1M */
-#define TIMER_BY_256K 0x01 /* clock divided by 256k */
-#define TIMER_BY_128K 0x02 /* clock divided by 128k */
-#define TIMER_BY_32K 0x03 /* clock divided by 32k */
-
-/****************** ****************** *******************/
-#endif
-
-#ifndef ZFIRM_ID
-/* #include "zfwint.h" */
-/****************** ****************** *******************/
-/*
- * This file contains the definitions for interfacing with the
- * Cyclom-Z ZFIRM Firmware.
- */
-
-/* General Constant definitions */
-
-#define MAX_CHAN 64 /* max number of channels per board */
-
-/* firmware id structure (set after boot) */
-
-#define ID_ADDRESS 0x00000180L /* signature/pointer address */
-#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */
-#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */
-#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */
-
-#define ZF_TINACT_DEF 1000 /* default inactivity timeout
- (1000 ms) */
-#define ZF_TINACT ZF_TINACT_DEF
-
-struct FIRM_ID {
- __u32 signature; /* ZFIRM/U signature */
- __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */
-};
-
-/* Op. System id */
-
-#define C_OS_LINUX 0x00000030 /* generic Linux system */
-
-/* channel op_mode */
-
-#define C_CH_DISABLE 0x00000000 /* channel is disabled */
-#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */
-#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */
-#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */
-#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */
-
-/* comm_parity - parity */
-
-#define C_PR_NONE 0x00000000 /* None */
-#define C_PR_ODD 0x00000001 /* Odd */
-#define C_PR_EVEN 0x00000002 /* Even */
-#define C_PR_MARK 0x00000004 /* Mark */
-#define C_PR_SPACE 0x00000008 /* Space */
-#define C_PR_PARITY 0x000000ff
-
-#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */
-#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */
-
-/* comm_data_l - data length and stop bits */
-
-#define C_DL_CS5 0x00000001
-#define C_DL_CS6 0x00000002
-#define C_DL_CS7 0x00000004
-#define C_DL_CS8 0x00000008
-#define C_DL_CS 0x0000000f
-#define C_DL_1STOP 0x00000010
-#define C_DL_15STOP 0x00000020
-#define C_DL_2STOP 0x00000040
-#define C_DL_STOP 0x000000f0
-
-/* interrupt enabling/status */
-
-#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */
-#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */
-#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */
-#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */
-#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */
-#define C_IN_MDCD 0x00000100 /* modem DCD change */
-#define C_IN_MDSR 0x00000200 /* modem DSR change */
-#define C_IN_MRI 0x00000400 /* modem RI change */
-#define C_IN_MCTS 0x00000800 /* modem CTS change */
-#define C_IN_RXBRK 0x00001000 /* Break received */
-#define C_IN_PR_ERROR 0x00002000 /* parity error */
-#define C_IN_FR_ERROR 0x00004000 /* frame error */
-#define C_IN_OVR_ERROR 0x00008000 /* overrun error */
-#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */
-#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */
-#define C_IN_MRTS 0x00040000 /* modem RTS drop */
-#define C_IN_ICHAR 0x00080000
-
-/* flow control */
-
-#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */
-#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */
-#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */
-#define C_FL_SWFLOW 0x0000000f
-
-/* flow status */
-
-#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */
-#define C_FS_SENDING 0x00000001 /* UART is sending data */
-#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */
-
-/* rs_control/rs_status RS-232 signals */
-
-#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in
- IOCTLM command */
-#define C_RS_RTS 0x00000001 /* RTS */
-#define C_RS_DTR 0x00000004 /* DTR */
-#define C_RS_DCD 0x00000100 /* CD */
-#define C_RS_DSR 0x00000200 /* DSR */
-#define C_RS_RI 0x00000400 /* RI */
-#define C_RS_CTS 0x00000800 /* CTS */
-
-/* commands Host <-> Board */
-
-#define C_CM_RESET 0x01 /* reset/flush buffers */
-#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */
-#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */
-#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */
-#define C_CM_SENDXOFF 0x10 /* send Xoff */
-#define C_CM_SENDXON 0x11 /* send Xon */
-#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */
-#define C_CM_SENDBRK 0x41 /* send break */
-#define C_CM_INTBACK 0x42 /* Interrupt back */
-#define C_CM_SET_BREAK 0x43 /* Tx break on */
-#define C_CM_CLR_BREAK 0x44 /* Tx break off */
-#define C_CM_CMD_DONE 0x45 /* Previous command done */
-#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */
-#define C_CM_TINACT 0x51 /* set inactivity detection */
-#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */
-#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */
-#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */
-#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */
-#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */
-#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */
-#define C_CM_Q_ENABLE 0x58 /* enables queue access from the
- driver */
-#define C_CM_Q_DISABLE 0x59 /* disables queue access from the
- driver */
-
-#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */
-#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */
-#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */
-#define C_CM_RXNNDT 0x63 /* rx no new data timeout */
-#define C_CM_TXFEMPTY 0x64
-#define C_CM_ICHAR 0x65
-#define C_CM_MDCD 0x70 /* modem DCD change */
-#define C_CM_MDSR 0x71 /* modem DSR change */
-#define C_CM_MRI 0x72 /* modem RI change */
-#define C_CM_MCTS 0x73 /* modem CTS change */
-#define C_CM_MRTS 0x74 /* modem RTS drop */
-#define C_CM_RXBRK 0x84 /* Break received */
-#define C_CM_PR_ERROR 0x85 /* Parity error */
-#define C_CM_FR_ERROR 0x86 /* Frame error */
-#define C_CM_OVR_ERROR 0x87 /* Overrun error */
-#define C_CM_RXOFL 0x88 /* RX buffer overflow */
-#define C_CM_CMDERROR 0x90 /* command error */
-#define C_CM_FATAL 0x91 /* fatal error */
-#define C_CM_HW_RESET 0x92 /* reset board */
-
-/*
- * CH_CTRL - This per port structure contains all parameters
- * that control an specific port. It can be seen as the
- * configuration registers of a "super-serial-controller".
- */
-
-struct CH_CTRL {
- __u32 op_mode; /* operation mode */
- __u32 intr_enable; /* interrupt masking */
- __u32 sw_flow; /* SW flow control */
- __u32 flow_status; /* output flow status */
- __u32 comm_baud; /* baud rate - numerically specified */
- __u32 comm_parity; /* parity */
- __u32 comm_data_l; /* data length/stop */
- __u32 comm_flags; /* other flags */
- __u32 hw_flow; /* HW flow control */
- __u32 rs_control; /* RS-232 outputs */
- __u32 rs_status; /* RS-232 inputs */
- __u32 flow_xon; /* xon char */
- __u32 flow_xoff; /* xoff char */
- __u32 hw_overflow; /* hw overflow counter */
- __u32 sw_overflow; /* sw overflow counter */
- __u32 comm_error; /* frame/parity error counter */
- __u32 ichar;
- __u32 filler[7];
-};
-
-
-/*
- * BUF_CTRL - This per channel structure contains
- * all Tx and Rx buffer control for a given channel.
- */
-
-struct BUF_CTRL {
- __u32 flag_dma; /* buffers are in Host memory */
- __u32 tx_bufaddr; /* address of the tx buffer */
- __u32 tx_bufsize; /* tx buffer size */
- __u32 tx_threshold; /* tx low water mark */
- __u32 tx_get; /* tail index tx buf */
- __u32 tx_put; /* head index tx buf */
- __u32 rx_bufaddr; /* address of the rx buffer */
- __u32 rx_bufsize; /* rx buffer size */
- __u32 rx_threshold; /* rx high water mark */
- __u32 rx_get; /* tail index rx buf */
- __u32 rx_put; /* head index rx buf */
- __u32 filler[5]; /* filler to align structures */
-};
-
-/*
- * BOARD_CTRL - This per board structure contains all global
- * control fields related to the board.
- */
-
-struct BOARD_CTRL {
-
- /* static info provided by the on-board CPU */
- __u32 n_channel; /* number of channels */
- __u32 fw_version; /* firmware version */
-
- /* static info provided by the driver */
- __u32 op_system; /* op_system id */
- __u32 dr_version; /* driver version */
-
- /* board control area */
- __u32 inactivity; /* inactivity control */
-
- /* host to FW commands */
- __u32 hcmd_channel; /* channel number */
- __u32 hcmd_param; /* pointer to parameters */
-
- /* FW to Host commands */
- __u32 fwcmd_channel; /* channel number */
- __u32 fwcmd_param; /* pointer to parameters */
- __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */
-
- /* filler so the structures are aligned */
- __u32 filler[6];
-};
-
-/* Host Interrupt Queue */
-
-#define QUEUE_SIZE (10*MAX_CHAN)
-
-struct INT_QUEUE {
- unsigned char intr_code[QUEUE_SIZE];
- unsigned long channel[QUEUE_SIZE];
- unsigned long param[QUEUE_SIZE];
- unsigned long put;
- unsigned long get;
-};
-
-/*
- * ZFW_CTRL - This is the data structure that includes all other
- * data structures used by the Firmware.
- */
-
-struct ZFW_CTRL {
- struct BOARD_CTRL board_ctrl;
- struct CH_CTRL ch_ctrl[MAX_CHAN];
- struct BUF_CTRL buf_ctrl[MAX_CHAN];
-};
-
-/****************** ****************** *******************/
-#endif
+#include <uapi/linux/cyclades.h>
-#ifdef __KERNEL__
/* Per card data structure */
struct cyclades_card {
/***************************************************************************/
-#endif /* __KERNEL__ */
#endif /* _LINUX_CYCLADES_H */
projects / karo-tx-linux.git / blobdiff