#include <net/ipv6.h>
#include <net/net_namespace.h>
-#define UIP_802154_SHORTADDR_LEN 2 /* compressed ipv6 address length */
-#define UIP_IPH_LEN 40 /* ipv6 fixed header size */
-#define UIP_PROTO_UDP 17 /* ipv6 next header value for UDP */
-#define UIP_FRAGH_LEN 8 /* ipv6 fragment header size */
-
#define EUI64_ADDR_LEN 8
#define LOWPAN_NHC_MAX_ID_LEN 1
+/* Maximum next header compression length which we currently support inclusive
+ * possible inline data.
+ */
+#define LOWPAN_NHC_MAX_HDR_LEN (sizeof(struct udphdr))
/* Max IPHC Header len without IPv6 hdr specific inline data.
* Useful for getting the "extra" bytes we need at worst case compression.
*
* LOWPAN_IPHC + CID + LOWPAN_NHC_MAX_ID_LEN
*/
#define LOWPAN_IPHC_MAX_HEADER_LEN (2 + 1 + LOWPAN_NHC_MAX_ID_LEN)
-
-/*
- * ipv6 address based on mac
- * second bit-flip (Universe/Local) is done according RFC2464
- */
-#define is_addr_mac_addr_based(a, m) \
- ((((a)->s6_addr[8]) == (((m)[0]) ^ 0x02)) && \
- (((a)->s6_addr[9]) == (m)[1]) && \
- (((a)->s6_addr[10]) == (m)[2]) && \
- (((a)->s6_addr[11]) == (m)[3]) && \
- (((a)->s6_addr[12]) == (m)[4]) && \
- (((a)->s6_addr[13]) == (m)[5]) && \
- (((a)->s6_addr[14]) == (m)[6]) && \
- (((a)->s6_addr[15]) == (m)[7]))
-
-/*
- * check whether we can compress the IID to 16 bits,
- * it's possible for unicast adresses with first 49 bits are zero only.
- */
-#define lowpan_is_iid_16_bit_compressable(a) \
- ((((a)->s6_addr16[4]) == 0) && \
- (((a)->s6_addr[10]) == 0) && \
- (((a)->s6_addr[11]) == 0xff) && \
- (((a)->s6_addr[12]) == 0xfe) && \
- (((a)->s6_addr[13]) == 0))
-
-/* check whether the 112-bit gid of the multicast address is mappable to: */
-
-/* 48 bits, FFXX::00XX:XXXX:XXXX */
-#define lowpan_is_mcast_addr_compressable48(a) \
- ((((a)->s6_addr16[1]) == 0) && \
- (((a)->s6_addr16[2]) == 0) && \
- (((a)->s6_addr16[3]) == 0) && \
- (((a)->s6_addr16[4]) == 0) && \
- (((a)->s6_addr[10]) == 0))
-
-/* 32 bits, FFXX::00XX:XXXX */
-#define lowpan_is_mcast_addr_compressable32(a) \
- ((((a)->s6_addr16[1]) == 0) && \
- (((a)->s6_addr16[2]) == 0) && \
- (((a)->s6_addr16[3]) == 0) && \
- (((a)->s6_addr16[4]) == 0) && \
- (((a)->s6_addr16[5]) == 0) && \
- (((a)->s6_addr[12]) == 0))
-
-/* 8 bits, FF02::00XX */
-#define lowpan_is_mcast_addr_compressable8(a) \
- ((((a)->s6_addr[1]) == 2) && \
- (((a)->s6_addr16[1]) == 0) && \
- (((a)->s6_addr16[2]) == 0) && \
- (((a)->s6_addr16[3]) == 0) && \
- (((a)->s6_addr16[4]) == 0) && \
- (((a)->s6_addr16[5]) == 0) && \
- (((a)->s6_addr16[6]) == 0) && \
- (((a)->s6_addr[14]) == 0))
-
-#define lowpan_is_addr_broadcast(a) \
- ((((a)[0]) == 0xFF) && \
- (((a)[1]) == 0xFF) && \
- (((a)[2]) == 0xFF) && \
- (((a)[3]) == 0xFF) && \
- (((a)[4]) == 0xFF) && \
- (((a)[5]) == 0xFF) && \
- (((a)[6]) == 0xFF) && \
- (((a)[7]) == 0xFF))
+/* Maximum worst case IPHC header buffer size */
+#define LOWPAN_IPHC_MAX_HC_BUF_LEN (sizeof(struct ipv6hdr) + \
+ LOWPAN_IPHC_MAX_HEADER_LEN + \
+ LOWPAN_NHC_MAX_HDR_LEN)
#define LOWPAN_DISPATCH_IPV6 0x41 /* 01000001 = 65 */
#define LOWPAN_DISPATCH_IPHC 0x60 /* 011xxxxx = ... */
return (dispatch & LOWPAN_DISPATCH_IPHC_MASK) == LOWPAN_DISPATCH_IPHC;
}
-#define LOWPAN_FRAG_TIMEOUT (HZ * 60) /* time-out 60 sec */
-
-#define LOWPAN_FRAG1_HEAD_SIZE 0x4
-#define LOWPAN_FRAGN_HEAD_SIZE 0x5
-
-/*
- * Values of fields within the IPHC encoding first byte
- * (C stands for compressed and I for inline)
- */
-#define LOWPAN_IPHC_TF 0x18
-
-#define LOWPAN_IPHC_FL_C 0x10
-#define LOWPAN_IPHC_TC_C 0x08
-#define LOWPAN_IPHC_NH_C 0x04
-#define LOWPAN_IPHC_TTL_1 0x01
-#define LOWPAN_IPHC_TTL_64 0x02
-#define LOWPAN_IPHC_TTL_255 0x03
-#define LOWPAN_IPHC_TTL_I 0x00
-
-
-/* Values of fields within the IPHC encoding second byte */
-#define LOWPAN_IPHC_CID 0x80
-
-#define LOWPAN_IPHC_ADDR_00 0x00
-#define LOWPAN_IPHC_ADDR_01 0x01
-#define LOWPAN_IPHC_ADDR_02 0x02
-#define LOWPAN_IPHC_ADDR_03 0x03
-
-#define LOWPAN_IPHC_SAC 0x40
-#define LOWPAN_IPHC_SAM 0x30
-
-#define LOWPAN_IPHC_SAM_BIT 4
-
-#define LOWPAN_IPHC_M 0x08
-#define LOWPAN_IPHC_DAC 0x04
-#define LOWPAN_IPHC_DAM_00 0x00
-#define LOWPAN_IPHC_DAM_01 0x01
-#define LOWPAN_IPHC_DAM_10 0x02
-#define LOWPAN_IPHC_DAM_11 0x03
-
-#define LOWPAN_IPHC_DAM_BIT 0
-/*
- * LOWPAN_UDP encoding (works together with IPHC)
- */
-#define LOWPAN_NHC_UDP_MASK 0xF8
-#define LOWPAN_NHC_UDP_ID 0xF0
-#define LOWPAN_NHC_UDP_CHECKSUMC 0x04
-#define LOWPAN_NHC_UDP_CHECKSUMI 0x00
-
-#define LOWPAN_NHC_UDP_4BIT_PORT 0xF0B0
-#define LOWPAN_NHC_UDP_4BIT_MASK 0xFFF0
-#define LOWPAN_NHC_UDP_8BIT_PORT 0xF000
-#define LOWPAN_NHC_UDP_8BIT_MASK 0xFF00
-
-/* values for port compression, _with checksum_ ie bit 5 set to 0 */
-#define LOWPAN_NHC_UDP_CS_P_00 0xF0 /* all inline */
-#define LOWPAN_NHC_UDP_CS_P_01 0xF1 /* source 16bit inline,
- dest = 0xF0 + 8 bit inline */
-#define LOWPAN_NHC_UDP_CS_P_10 0xF2 /* source = 0xF0 + 8bit inline,
- dest = 16 bit inline */
-#define LOWPAN_NHC_UDP_CS_P_11 0xF3 /* source & dest = 0xF0B + 4bit inline */
-#define LOWPAN_NHC_UDP_CS_C 0x04 /* checksum elided */
-
#define LOWPAN_PRIV_SIZE(llpriv_size) \
(sizeof(struct lowpan_priv) + llpriv_size)
#ifdef DEBUG
/* print data in line */
static inline void raw_dump_inline(const char *caller, char *msg,
- unsigned char *buf, int len)
+ const unsigned char *buf, int len)
{
if (msg)
pr_debug("%s():%s: ", caller, msg);
* ...
*/
static inline void raw_dump_table(const char *caller, char *msg,
- unsigned char *buf, int len)
+ const unsigned char *buf, int len)
{
if (msg)
pr_debug("%s():%s:\n", caller, msg);
}
#else
static inline void raw_dump_table(const char *caller, char *msg,
- unsigned char *buf, int len) { }
+ const unsigned char *buf, int len) { }
static inline void raw_dump_inline(const char *caller, char *msg,
- unsigned char *buf, int len) { }
+ const unsigned char *buf, int len) { }
#endif
-static inline int lowpan_fetch_skb_u8(struct sk_buff *skb, u8 *val)
-{
- if (unlikely(!pskb_may_pull(skb, 1)))
- return -EINVAL;
-
- *val = skb->data[0];
- skb_pull(skb, 1);
-
- return 0;
-}
-
-static inline bool lowpan_fetch_skb(struct sk_buff *skb,
- void *data, const unsigned int len)
+/**
+ * lowpan_fetch_skb - getting inline data from 6LoWPAN header
+ *
+ * This function will pull data from sk buffer and put it into data to
+ * remove the 6LoWPAN inline data. This function returns true if the
+ * sk buffer is too small to pull the amount of data which is specified
+ * by len.
+ *
+ * @skb: the buffer where the inline data should be pulled from.
+ * @data: destination buffer for the inline data.
+ * @len: amount of data which should be pulled in bytes.
+ */
+static inline bool lowpan_fetch_skb(struct sk_buff *skb, void *data,
+ unsigned int len)
{
if (unlikely(!pskb_may_pull(skb, len)))
return true;
void lowpan_netdev_setup(struct net_device *dev, enum lowpan_lltypes lltype);
-int
-lowpan_header_decompress(struct sk_buff *skb, struct net_device *dev,
- const u8 *saddr, const u8 saddr_type,
- const u8 saddr_len, const u8 *daddr,
- const u8 daddr_type, const u8 daddr_len,
- u8 iphc0, u8 iphc1);
-int lowpan_header_compress(struct sk_buff *skb, struct net_device *dev,
- unsigned short type, const void *_daddr,
- const void *_saddr, unsigned int len);
+/**
+ * lowpan_header_decompress - replace 6LoWPAN header with IPv6 header
+ *
+ * This function replaces the IPHC 6LoWPAN header which should be pointed at
+ * skb->data and skb_network_header, with the IPv6 header.
+ * It would be nice that the caller have the necessary headroom of IPv6 header
+ * and greatest Transport layer header, this would reduce the overhead for
+ * reallocate headroom.
+ *
+ * @skb: the buffer which should be manipulate.
+ * @dev: the lowpan net device pointer.
+ * @daddr: destination lladdr of mac header which is used for compression
+ * methods.
+ * @saddr: source lladdr of mac header which is used for compression
+ * methods.
+ */
+int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
+ const void *daddr, const void *saddr);
+
+/**
+ * lowpan_header_compress - replace IPv6 header with 6LoWPAN header
+ *
+ * This function replaces the IPv6 header which should be pointed at
+ * skb->data and skb_network_header, with the IPHC 6LoWPAN header.
+ * The caller need to be sure that the sk buffer is not shared and at have
+ * at least a headroom which is smaller or equal LOWPAN_IPHC_MAX_HEADER_LEN,
+ * which is the IPHC "more bytes than IPv6 header" at worst case.
+ *
+ * @skb: the buffer which should be manipulate.
+ * @dev: the lowpan net device pointer.
+ * @daddr: destination lladdr of mac header which is used for compression
+ * methods.
+ * @saddr: source lladdr of mac header which is used for compression
+ * methods.
+ */
+int lowpan_header_compress(struct sk_buff *skb, const struct net_device *dev,
+ const void *daddr, const void *saddr);
#endif /* __6LOWPAN_H__ */
projects / karo-tx-linux.git / blobdiff