#include "internals.h"
+static irqreturn_t bad_chained_irq(int irq, void *dev_id)
+{
+ WARN_ONCE(1, "Chained irq %d should not call an action\n", irq);
+ return IRQ_NONE;
+}
+
+/*
+ * Chained handlers should never call action on their IRQ. This default
+ * action will emit warning if such thing happens.
+ */
+struct irqaction chained_action = {
+ .handler = bad_chained_irq,
+};
+
/**
* irq_set_chip - set the irq chip for an irq
* @irq: irq number
if (!desc)
return -EINVAL;
- desc->irq_data.handler_data = data;
+ desc->irq_common_data.handler_data = data;
irq_put_desc_unlock(desc, flags);
return 0;
}
if (!desc)
return -EINVAL;
- desc->irq_data.msi_desc = entry;
+ desc->irq_common_data.msi_desc = entry;
if (entry && !irq_offset)
entry->irq = irq_base;
irq_put_desc_unlock(desc, flags);
* disabled. If an interrupt happens, then the interrupt flow
* handler masks the line at the hardware level and marks it
* pending.
+ *
+ * If the interrupt chip does not implement the irq_disable callback,
+ * a driver can disable the lazy approach for a particular irq line by
+ * calling 'irq_set_status_flags(irq, IRQ_DISABLE_UNLAZY)'. This can
+ * be used for devices which cannot disable the interrupt at the
+ * device level under certain circumstances and have to use
+ * disable_irq[_nosync] instead.
*/
void irq_disable(struct irq_desc *desc)
{
if (desc->irq_data.chip->irq_disable) {
desc->irq_data.chip->irq_disable(&desc->irq_data);
irq_state_set_masked(desc);
+ } else if (irq_settings_disable_unlazy(desc)) {
+ mask_irq(desc);
}
}
/**
* handle_simple_irq - Simple and software-decoded IRQs.
- * @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Simple interrupts are either sent from a demultiplexing interrupt
* Note: The caller is expected to handle the ack, clear, mask and
* unmask issues if necessary.
*/
-void
-handle_simple_irq(unsigned int irq, struct irq_desc *desc)
+void handle_simple_irq(struct irq_desc *desc)
{
raw_spin_lock(&desc->lock);
/**
* handle_level_irq - Level type irq handler
- * @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Level type interrupts are active as long as the hardware line has
* it after the associated handler has acknowledged the device, so the
* interrupt line is back to inactive.
*/
-void
-handle_level_irq(unsigned int irq, struct irq_desc *desc)
+void handle_level_irq(struct irq_desc *desc)
{
raw_spin_lock(&desc->lock);
mask_ack_irq(desc);
/**
* handle_fasteoi_irq - irq handler for transparent controllers
- * @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Only a single callback will be issued to the chip: an ->eoi()
* for modern forms of interrupt handlers, which handle the flow
* details in hardware, transparently.
*/
-void
-handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc)
+void handle_fasteoi_irq(struct irq_desc *desc)
{
struct irq_chip *chip = desc->irq_data.chip;
/**
* handle_edge_irq - edge type IRQ handler
- * @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Interrupt occures on the falling and/or rising edge of a hardware
* the handler was running. If all pending interrupts are handled, the
* loop is left.
*/
-void
-handle_edge_irq(unsigned int irq, struct irq_desc *desc)
+void handle_edge_irq(struct irq_desc *desc)
{
raw_spin_lock(&desc->lock);
#ifdef CONFIG_IRQ_EDGE_EOI_HANDLER
/**
* handle_edge_eoi_irq - edge eoi type IRQ handler
- * @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Similar as the above handle_edge_irq, but using eoi and w/o the
* mask/unmask logic.
*/
-void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc)
+void handle_edge_eoi_irq(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
/**
* handle_percpu_irq - Per CPU local irq handler
- * @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Per CPU interrupts on SMP machines without locking requirements
*/
-void
-handle_percpu_irq(unsigned int irq, struct irq_desc *desc)
+void handle_percpu_irq(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
- handle_irq_event_percpu(desc, desc->action);
+ handle_irq_event_percpu(desc);
if (chip->irq_eoi)
chip->irq_eoi(&desc->irq_data);
/**
* handle_percpu_devid_irq - Per CPU local irq handler with per cpu dev ids
- * @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Per CPU interrupts on SMP machines without locking requirements. Same as
* contain the real device id for the cpu on which this handler is
* called
*/
-void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc)
+void handle_percpu_devid_irq(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
struct irqaction *action = desc->action;
void *dev_id = raw_cpu_ptr(action->percpu_dev_id);
+ unsigned int irq = irq_desc_get_irq(desc);
irqreturn_t res;
kstat_incr_irqs_this_cpu(desc);
if (desc->irq_data.chip != &no_irq_chip)
mask_ack_irq(desc);
irq_state_set_disabled(desc);
+ if (is_chained)
+ desc->action = NULL;
desc->depth = 1;
}
desc->handle_irq = handle;
irq_settings_set_noprobe(desc);
irq_settings_set_norequest(desc);
irq_settings_set_nothread(desc);
+ desc->action = &chained_action;
irq_startup(desc, true);
}
}
return;
__irq_do_set_handler(desc, handle, 1, NULL);
- desc->irq_data.handler_data = data;
+ desc->irq_common_data.handler_data = data;
irq_put_desc_busunlock(desc, flags);
}
projects / karo-tx-linux.git / blobdiff