struct scatterlist *cipher = areq_ctx->cipher;
struct scatterlist *hsg = areq_ctx->hsg;
struct scatterlist *tsg = areq_ctx->tsg;
- struct scatterlist *assoc1;
- struct scatterlist *assoc2;
unsigned int ivsize = crypto_aead_ivsize(authenc_esn);
unsigned int cryptlen = req->cryptlen;
struct page *dstp;
cryptlen += ivsize;
}
- if (sg_is_last(assoc))
- return -EINVAL;
-
- assoc1 = assoc + 1;
- if (sg_is_last(assoc1))
- return -EINVAL;
-
- assoc2 = assoc + 2;
- if (!sg_is_last(assoc2))
+ if (assoc->length < 12)
return -EINVAL;
sg_init_table(hsg, 2);
- sg_set_page(hsg, sg_page(assoc), assoc->length, assoc->offset);
- sg_set_page(hsg + 1, sg_page(assoc2), assoc2->length, assoc2->offset);
+ sg_set_page(hsg, sg_page(assoc), 4, assoc->offset);
+ sg_set_page(hsg + 1, sg_page(assoc), 4, assoc->offset + 8);
sg_init_table(tsg, 1);
- sg_set_page(tsg, sg_page(assoc1), assoc1->length, assoc1->offset);
+ sg_set_page(tsg, sg_page(assoc), 4, assoc->offset + 4);
areq_ctx->cryptlen = cryptlen;
- areq_ctx->headlen = assoc->length + assoc2->length;
- areq_ctx->trailen = assoc1->length;
+ areq_ctx->headlen = 8;
+ areq_ctx->trailen = 4;
areq_ctx->sg = dst;
areq_ctx->complete = authenc_esn_geniv_ahash_done;
struct scatterlist *cipher = areq_ctx->cipher;
struct scatterlist *hsg = areq_ctx->hsg;
struct scatterlist *tsg = areq_ctx->tsg;
- struct scatterlist *assoc1;
- struct scatterlist *assoc2;
unsigned int ivsize = crypto_aead_ivsize(authenc_esn);
struct page *srcp;
u8 *vsrc;
cryptlen += ivsize;
}
- if (sg_is_last(assoc))
- return -EINVAL;
-
- assoc1 = assoc + 1;
- if (sg_is_last(assoc1))
- return -EINVAL;
-
- assoc2 = assoc + 2;
- if (!sg_is_last(assoc2))
+ if (assoc->length < 12)
return -EINVAL;
sg_init_table(hsg, 2);
- sg_set_page(hsg, sg_page(assoc), assoc->length, assoc->offset);
- sg_set_page(hsg + 1, sg_page(assoc2), assoc2->length, assoc2->offset);
+ sg_set_page(hsg, sg_page(assoc), 4, assoc->offset);
+ sg_set_page(hsg + 1, sg_page(assoc), 4, assoc->offset + 8);
sg_init_table(tsg, 1);
- sg_set_page(tsg, sg_page(assoc1), assoc1->length, assoc1->offset);
+ sg_set_page(tsg, sg_page(assoc), 4, assoc->offset + 4);
areq_ctx->cryptlen = cryptlen;
- areq_ctx->headlen = assoc->length + assoc2->length;
- areq_ctx->trailen = assoc1->length;
+ areq_ctx->headlen = 8;
+ areq_ctx->trailen = 4;
areq_ctx->sg = src;
areq_ctx->complete = authenc_esn_verify_ahash_done;
* Other architectures (e.g., ARM) either do not support big endian, or
* else leave I/O in little endian mode.
*/
- if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
return __raw_readl(addr);
else
return readl_relaxed(addr);
static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
{
/* See brcm_sata_readreg() comments */
- if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
__raw_writel(val, addr);
else
writel_relaxed(val, addr);
priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
}
+#ifdef CONFIG_PM_SLEEP
static int brcm_ahci_suspend(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
brcm_sata_phys_enable(priv);
return ahci_platform_resume(dev);
}
+#endif
static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
* RETURNS:
* Block address read from @tf.
*/
-u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev)
+u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
{
u64 block = 0;
- if (!dev || tf->flags & ATA_TFLAG_LBA) {
+ if (tf->flags & ATA_TFLAG_LBA) {
if (tf->flags & ATA_TFLAG_LBA48) {
block |= (u64)tf->hob_lbah << 40;
block |= (u64)tf->hob_lbam << 32;
return 0;
}
-static void ata_dev_config_sense_reporting(struct ata_device *dev)
-{
- unsigned int err_mask;
-
- if (!ata_id_has_sense_reporting(dev->id))
- return;
-
- if (ata_id_sense_reporting_enabled(dev->id))
- return;
-
- err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1);
- if (err_mask) {
- ata_dev_dbg(dev,
- "failed to enable Sense Data Reporting, Emask 0x%x\n",
- err_mask);
- }
-}
-
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
dev->devslp_timing[i] = sata_setting[j];
}
}
- ata_dev_config_sense_reporting(dev);
+
dev->cdb_len = 16;
}
tf->hob_lbah = buf[10];
tf->nsect = buf[12];
tf->hob_nsect = buf[13];
- if (ata_id_has_ncq_autosense(dev->id))
- tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
return 0;
}
return err_mask;
}
-/**
- * ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
- * @dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to
- * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
- * @dfl_sense_key: default sense key to use
- *
- * Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
- * SENSE. This function is EH helper.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * encoded sense data on success, 0 on failure or if sense data
- * is not available.
- */
-static u32 ata_eh_request_sense(struct ata_queued_cmd *qc,
- struct scsi_cmnd *cmd)
-{
- struct ata_device *dev = qc->dev;
- struct ata_taskfile tf;
- unsigned int err_mask;
-
- if (!cmd)
- return 0;
-
- DPRINTK("ATA request sense\n");
- ata_dev_warn(dev, "request sense\n");
- if (!ata_id_sense_reporting_enabled(dev->id)) {
- ata_dev_warn(qc->dev, "sense data reporting disabled\n");
- return 0;
- }
- ata_tf_init(dev, &tf);
-
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
- tf.command = ATA_CMD_REQ_SENSE_DATA;
- tf.protocol = ATA_PROT_NODATA;
-
- err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
- /*
- * ACS-4 states:
- * The device may set the SENSE DATA AVAILABLE bit to one in the
- * STATUS field and clear the ERROR bit to zero in the STATUS field
- * to indicate that the command returned completion without an error
- * and the sense data described in table 306 is available.
- *
- * IOW the 'ATA_SENSE' bit might not be set even though valid
- * sense data is available.
- * So check for both.
- */
- if ((tf.command & ATA_SENSE) ||
- tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) {
- ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal);
- qc->flags |= ATA_QCFLAG_SENSE_VALID;
- ata_dev_warn(dev, "sense data %02x/%02x/%02x\n",
- tf.lbah, tf.lbam, tf.lbal);
- } else {
- ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
- tf.command, err_mask);
- }
- return err_mask;
-}
-
/**
* atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
* @dev: device to perform REQUEST_SENSE to
memcpy(&qc->result_tf, &tf, sizeof(tf));
qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
- if (qc->result_tf.auxiliary) {
- char sense_key, asc, ascq;
-
- sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
- asc = (qc->result_tf.auxiliary >> 8) & 0xff;
- ascq = qc->result_tf.auxiliary & 0xff;
- ata_dev_dbg(dev, "NCQ Autosense %02x/%02x/%02x\n",
- sense_key, asc, ascq);
- ata_scsi_set_sense(qc->scsicmd, sense_key, asc, ascq);
- ata_scsi_set_sense_information(qc->scsicmd, &qc->result_tf);
- qc->flags |= ATA_QCFLAG_SENSE_VALID;
- }
-
ehc->i.err_mask &= ~AC_ERR_DEV;
}
return ATA_EH_RESET;
}
- /*
- * Sense data reporting does not work if the
- * device fault bit is set.
- */
- if ((stat & ATA_SENSE) && !(stat & ATA_DF) &&
- !(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
- if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
- tmp = ata_eh_request_sense(qc, qc->scsicmd);
- if (tmp)
- qc->err_mask |= tmp;
- else
- ata_scsi_set_sense_information(qc->scsicmd, tf);
- } else {
- ata_dev_warn(qc->dev, "sense data available but port frozen\n");
- }
- }
-
- /* Set by NCQ autosense or request sense above */
- if (qc->flags & ATA_QCFLAG_SENSE_VALID)
- return 0;
-
if (stat & (ATA_ERR | ATA_DF))
qc->err_mask |= AC_ERR_DEV;
else
#ifdef CONFIG_ATA_VERBOSE_ERROR
if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
- ATA_SENSE | ATA_ERR)) {
+ ATA_ERR)) {
if (res->command & ATA_BUSY)
ata_dev_err(qc->dev, "status: { Busy }\n");
else
- ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
+ ata_dev_err(qc->dev, "status: { %s%s%s%s}\n",
res->command & ATA_DRDY ? "DRDY " : "",
res->command & ATA_DF ? "DF " : "",
res->command & ATA_DRQ ? "DRQ " : "",
- res->command & ATA_SENSE ? "SENSE " : "",
res->command & ATA_ERR ? "ERR " : "");
}
ata_scsi_park_show, ata_scsi_park_store);
EXPORT_SYMBOL_GPL(dev_attr_unload_heads);
-void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
{
- if (!cmd)
- return;
-
cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq);
}
-void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
- const struct ata_taskfile *tf)
-{
- u64 information;
-
- if (!cmd)
- return;
-
- information = ata_tf_read_block(tf, NULL);
- scsi_set_sense_information(cmd->sense_buffer, information);
-}
-
static ssize_t
ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
((cdb[2] & 0x20) || need_sense)) {
ata_gen_passthru_sense(qc);
} else {
- if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
- cmd->result = SAM_STAT_CHECK_CONDITION;
- } else if (!need_sense) {
+ if (!need_sense) {
cmd->result = SAM_STAT_GOOD;
} else {
/* TODO: decide which descriptor format to use
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag);
-extern u64 ata_tf_read_block(const struct ata_taskfile *tf,
- struct ata_device *dev);
+extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
extern unsigned ata_exec_internal(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, void *buf, unsigned int buflen,
struct scsi_host_template *sht);
extern void ata_scsi_scan_host(struct ata_port *ap, int sync);
extern int ata_scsi_offline_dev(struct ata_device *dev);
-extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq);
-extern void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
- const struct ata_taskfile *tf);
extern void ata_scsi_media_change_notify(struct ata_device *dev);
extern void ata_scsi_hotplug(struct work_struct *work);
extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
readl(mmio + PDC_SDRAM_CONTROL);
/* Turn on for ECC */
- pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
- PDC_DIMM_SPD_TYPE, &spd0);
+ if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+ PDC_DIMM_SPD_TYPE, &spd0)) {
+ pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n",
+ PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
+ return 1;
+ }
if (spd0 == 0x02) {
data |= (0x01 << 16);
writel(data, mmio + PDC_SDRAM_CONTROL);
/* ECC initiliazation. */
- pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
- PDC_DIMM_SPD_TYPE, &spd0);
+ if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+ PDC_DIMM_SPD_TYPE, &spd0)) {
+ pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n",
+ PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
+ return 1;
+ }
if (spd0 == 0x02) {
void *buf;
VPRINTK("Start ECC initialization\n");
state->buflen_1;
u32 *sh_desc = ctx->sh_desc_fin, *desc;
dma_addr_t ptr = ctx->sh_desc_fin_dma;
- int sec4_sg_bytes;
+ int sec4_sg_bytes, sec4_sg_src_index;
int digestsize = crypto_ahash_digestsize(ahash);
struct ahash_edesc *edesc;
int ret = 0;
int sh_len;
- sec4_sg_bytes = (1 + (buflen ? 1 : 0)) * sizeof(struct sec4_sg_entry);
+ sec4_sg_src_index = 1 + (buflen ? 1 : 0);
+ sec4_sg_bytes = sec4_sg_src_index * sizeof(struct sec4_sg_entry);
/* allocate space for base edesc and hw desc commands, link tables */
edesc = kmalloc(sizeof(struct ahash_edesc) + DESC_JOB_IO_LEN +
state->buf_dma = try_buf_map_to_sec4_sg(jrdev, edesc->sec4_sg + 1,
buf, state->buf_dma, buflen,
last_buflen);
- (edesc->sec4_sg + sec4_sg_bytes - 1)->len |= SEC4_SG_LEN_FIN;
+ (edesc->sec4_sg + sec4_sg_src_index - 1)->len |= SEC4_SG_LEN_FIN;
edesc->sec4_sg_dma = dma_map_single(jrdev, edesc->sec4_sg,
sec4_sg_bytes, DMA_TO_DEVICE);
struct sha256_state *sctx = shash_desc_ctx(desc);
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
- struct nx_sg *in_sg;
struct nx_sg *out_sg;
u64 to_process = 0, leftover, total;
unsigned long irq_flags;
NX_CPB_FDM(csbcpb) |= NX_FDM_INTERMEDIATE;
NX_CPB_FDM(csbcpb) |= NX_FDM_CONTINUATION;
- in_sg = nx_ctx->in_sg;
max_sg_len = min_t(u64, nx_ctx->ap->sglen,
nx_driver.of.max_sg_len/sizeof(struct nx_sg));
max_sg_len = min_t(u64, max_sg_len,
}
do {
- /*
- * to_process: the SHA256_BLOCK_SIZE data chunk to process in
- * this update. This value is also restricted by the sg list
- * limits.
- */
- to_process = total - to_process;
- to_process = to_process & ~(SHA256_BLOCK_SIZE - 1);
+ int used_sgs = 0;
+ struct nx_sg *in_sg = nx_ctx->in_sg;
if (buf_len) {
data_len = buf_len;
- in_sg = nx_build_sg_list(nx_ctx->in_sg,
+ in_sg = nx_build_sg_list(in_sg,
(u8 *) sctx->buf,
&data_len,
max_sg_len);
rc = -EINVAL;
goto out;
}
+ used_sgs = in_sg - nx_ctx->in_sg;
}
+ /* to_process: SHA256_BLOCK_SIZE aligned chunk to be
+ * processed in this iteration. This value is restricted
+ * by sg list limits and number of sgs we already used
+ * for leftover data. (see above)
+ * In ideal case, we could allow NX_PAGE_SIZE * max_sg_len,
+ * but because data may not be aligned, we need to account
+ * for that too. */
+ to_process = min_t(u64, total,
+ (max_sg_len - 1 - used_sgs) * NX_PAGE_SIZE);
+ to_process = to_process & ~(SHA256_BLOCK_SIZE - 1);
+
data_len = to_process - buf_len;
in_sg = nx_build_sg_list(in_sg, (u8 *) data,
&data_len, max_sg_len);
nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) * sizeof(struct nx_sg);
- to_process = (data_len + buf_len);
+ to_process = data_len + buf_len;
leftover = total - to_process;
/*
struct sha512_state *sctx = shash_desc_ctx(desc);
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
- struct nx_sg *in_sg;
struct nx_sg *out_sg;
u64 to_process, leftover = 0, total;
unsigned long irq_flags;
NX_CPB_FDM(csbcpb) |= NX_FDM_INTERMEDIATE;
NX_CPB_FDM(csbcpb) |= NX_FDM_CONTINUATION;
- in_sg = nx_ctx->in_sg;
max_sg_len = min_t(u64, nx_ctx->ap->sglen,
nx_driver.of.max_sg_len/sizeof(struct nx_sg));
max_sg_len = min_t(u64, max_sg_len,
}
do {
- /*
- * to_process: the SHA512_BLOCK_SIZE data chunk to process in
- * this update. This value is also restricted by the sg list
- * limits.
- */
- to_process = total - leftover;
- to_process = to_process & ~(SHA512_BLOCK_SIZE - 1);
- leftover = total - to_process;
+ int used_sgs = 0;
+ struct nx_sg *in_sg = nx_ctx->in_sg;
if (buf_len) {
data_len = buf_len;
- in_sg = nx_build_sg_list(nx_ctx->in_sg,
+ in_sg = nx_build_sg_list(in_sg,
(u8 *) sctx->buf,
&data_len, max_sg_len);
rc = -EINVAL;
goto out;
}
+ used_sgs = in_sg - nx_ctx->in_sg;
}
+ /* to_process: SHA512_BLOCK_SIZE aligned chunk to be
+ * processed in this iteration. This value is restricted
+ * by sg list limits and number of sgs we already used
+ * for leftover data. (see above)
+ * In ideal case, we could allow NX_PAGE_SIZE * max_sg_len,
+ * but because data may not be aligned, we need to account
+ * for that too. */
+ to_process = min_t(u64, total,
+ (max_sg_len - 1 - used_sgs) * NX_PAGE_SIZE);
+ to_process = to_process & ~(SHA512_BLOCK_SIZE - 1);
+
data_len = to_process - buf_len;
in_sg = nx_build_sg_list(in_sg, (u8 *) data,
&data_len, max_sg_len);
goto out;
}
- to_process = (data_len + buf_len);
+ to_process = data_len + buf_len;
leftover = total - to_process;
/*
from an EDID retrieval */
if (port->connector) {
mutex_lock(&mgr->destroy_connector_lock);
- list_add(&port->connector->destroy_list, &mgr->destroy_connector_list);
+ list_add(&port->next, &mgr->destroy_connector_list);
mutex_unlock(&mgr->destroy_connector_lock);
schedule_work(&mgr->destroy_connector_work);
+ return;
}
drm_dp_port_teardown_pdt(port, port->pdt);
static void drm_dp_destroy_connector_work(struct work_struct *work)
{
struct drm_dp_mst_topology_mgr *mgr = container_of(work, struct drm_dp_mst_topology_mgr, destroy_connector_work);
- struct drm_connector *connector;
+ struct drm_dp_mst_port *port;
/*
* Not a regular list traverse as we have to drop the destroy
*/
for (;;) {
mutex_lock(&mgr->destroy_connector_lock);
- connector = list_first_entry_or_null(&mgr->destroy_connector_list, struct drm_connector, destroy_list);
- if (!connector) {
+ port = list_first_entry_or_null(&mgr->destroy_connector_list, struct drm_dp_mst_port, next);
+ if (!port) {
mutex_unlock(&mgr->destroy_connector_lock);
break;
}
- list_del(&connector->destroy_list);
+ list_del(&port->next);
mutex_unlock(&mgr->destroy_connector_lock);
- mgr->cbs->destroy_connector(mgr, connector);
+ mgr->cbs->destroy_connector(mgr, port->connector);
+
+ drm_dp_port_teardown_pdt(port, port->pdt);
+
+ if (!port->input && port->vcpi.vcpi > 0)
+ drm_dp_mst_put_payload_id(mgr, port->vcpi.vcpi);
+ kfree(port);
}
}
struct drm_atomic_state *state,
bool async)
{
- int ret;
- int i;
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc *crtc;
+ int ret, i;
if (async) {
DRM_DEBUG_KMS("i915 does not yet support async commit\n");
return ret;
/* Point of no return */
-
- /*
- * FIXME: The proper sequence here will eventually be:
- *
- * drm_atomic_helper_swap_state(dev, state)
- * drm_atomic_helper_commit_modeset_disables(dev, state);
- * drm_atomic_helper_commit_planes(dev, state);
- * drm_atomic_helper_commit_modeset_enables(dev, state);
- * drm_atomic_helper_wait_for_vblanks(dev, state);
- * drm_atomic_helper_cleanup_planes(dev, state);
- * drm_atomic_state_free(state);
- *
- * once we have full atomic modeset. For now, just manually update
- * plane states to avoid clobbering good states with dummy states
- * while nuclear pageflipping.
- */
- for (i = 0; i < dev->mode_config.num_total_plane; i++) {
- struct drm_plane *plane = state->planes[i];
-
- if (!plane)
- continue;
-
- plane->state->state = state;
- swap(state->plane_states[i], plane->state);
- plane->state->state = NULL;
- }
+ drm_atomic_helper_swap_state(dev, state);
/* swap crtc_scaler_state */
- for (i = 0; i < dev->mode_config.num_crtc; i++) {
- struct drm_crtc *crtc = state->crtcs[i];
- if (!crtc) {
- continue;
- }
-
- to_intel_crtc(crtc)->config->scaler_state =
- to_intel_crtc_state(state->crtc_states[i])->scaler_state;
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
if (INTEL_INFO(dev)->gen >= 9)
skl_detach_scalers(to_intel_crtc(crtc));
+
+ drm_atomic_helper_commit_planes_on_crtc(crtc_state);
}
- drm_atomic_helper_commit_planes(dev, state);
drm_atomic_helper_wait_for_vblanks(dev, state);
drm_atomic_helper_cleanup_planes(dev, state);
drm_atomic_state_free(state);
goto encoder_retry;
}
- pipe_config->dither = pipe_config->pipe_bpp != base_bpp;
+ /* Dithering seems to not pass-through bits correctly when it should, so
+ * only enable it on 6bpc panels. */
+ pipe_config->dither = pipe_config->pipe_bpp == 6*3;
DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
modeset_update_crtc_power_domains(state);
- drm_atomic_helper_commit_planes(dev, state);
-
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (!needs_modeset(crtc->state) || !crtc->state->enable)
+ if (!needs_modeset(crtc->state) || !crtc->state->enable) {
+ drm_atomic_helper_commit_planes_on_crtc(crtc_state);
continue;
+ }
update_scanline_offset(to_intel_crtc(crtc));
dev_priv->display.crtc_enable(crtc);
- intel_crtc_enable_planes(crtc);
+ drm_atomic_helper_commit_planes_on_crtc(crtc_state);
}
/* FIXME: add subpixel order */
return 0;
}
-static bool primary_plane_visible(struct drm_crtc *crtc)
-{
- struct intel_plane_state *plane_state =
- to_intel_plane_state(crtc->primary->state);
-
- return plane_state->visible;
-}
-
static int intel_crtc_set_config(struct drm_mode_set *set)
{
struct drm_device *dev;
struct drm_atomic_state *state = NULL;
struct intel_crtc_state *pipe_config;
- bool primary_plane_was_visible;
int ret;
BUG_ON(!set);
intel_update_pipe_size(to_intel_crtc(set->crtc));
- primary_plane_was_visible = primary_plane_visible(set->crtc);
-
ret = intel_set_mode_with_config(set->crtc, pipe_config, true);
- if (ret == 0 &&
- pipe_config->base.enable &&
- pipe_config->base.planes_changed &&
- !needs_modeset(&pipe_config->base)) {
- struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
-
- /*
- * We need to make sure the primary plane is re-enabled if it
- * has previously been turned off.
- */
- if (ret == 0 && !primary_plane_was_visible &&
- primary_plane_visible(set->crtc)) {
- WARN_ON(!intel_crtc->active);
- intel_post_enable_primary(set->crtc);
- }
-
- /*
- * In the fastboot case this may be our only check of the
- * state after boot. It would be better to only do it on
- * the first update, but we don't have a nice way of doing that
- * (and really, set_config isn't used much for high freq page
- * flipping, so increasing its cost here shouldn't be a big
- * deal).
- */
- if (i915.fastboot && ret == 0)
- intel_modeset_check_state(set->crtc->dev);
- }
-
if (ret) {
DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
set->crtc->base.id, ret);
*/
if (IS_BROADWELL(dev))
intel_crtc->atomic.wait_vblank = true;
+
+ if (crtc_state)
+ intel_crtc->atomic.post_enable_primary = true;
}
/*
if (!state->visible || !fb)
intel_crtc->atomic.disable_ips = true;
+ if (!state->visible && old_state->visible &&
+ crtc_state && !needs_modeset(&crtc_state->base))
+ intel_crtc->atomic.pre_disable_primary = true;
+
intel_crtc->atomic.fb_bits |=
INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
struct intel_plane_state *plane_state;
memset(crtc->config, 0, sizeof(*crtc->config));
+ crtc->config->base.crtc = &crtc->base;
crtc->config->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
printk(KERN_ERR MOD
"Unexpected cqe_status 0x%x for QPID=0x%0x\n",
CQE_STATUS(&cqe), CQE_QPID(&cqe));
- ret = -EINVAL;
+ wc->status = IB_WC_FATAL_ERR;
}
}
out:
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
-#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
}
}
EXPORT_SYMBOL(scsi_build_sense_buffer);
-
-/**
- * scsi_set_sense_information - set the information field in a
- * formatted sense data buffer
- * @buf: Where to build sense data
- * @info: 64-bit information value to be set
- *
- **/
-void scsi_set_sense_information(u8 *buf, u64 info)
-{
- if ((buf[0] & 0x7f) == 0x72) {
- u8 *ucp, len;
-
- len = buf[7];
- ucp = (char *)scsi_sense_desc_find(buf, len + 8, 0);
- if (!ucp) {
- buf[7] = len + 0xa;
- ucp = buf + 8 + len;
- }
- ucp[0] = 0;
- ucp[1] = 0xa;
- ucp[2] = 0x80; /* Valid bit */
- ucp[3] = 0;
- put_unaligned_be64(info, &ucp[4]);
- } else if ((buf[0] & 0x7f) == 0x70) {
- buf[0] |= 0x80;
- put_unaligned_be64(info, &buf[3]);
- }
-}
-EXPORT_SYMBOL(scsi_set_sense_information);
uint8_t num_h_tile, num_v_tile;
uint8_t tile_h_loc, tile_v_loc;
uint16_t tile_h_size, tile_v_size;
-
- struct list_head destroy_list;
};
/**
SATA_SSP = 0x06, /* Software Settings Preservation */
SATA_DEVSLP = 0x09, /* Device Sleep */
- SETFEATURE_SENSE_DATA = 0xC3, /* Sense Data Reporting feature */
-
/* feature values for SET_MAX */
ATA_SET_MAX_ADDR = 0x00,
ATA_SET_MAX_PASSWD = 0x01,
#define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
#define ata_id_has_da(id) ((id)[ATA_ID_SATA_CAPABILITY_2] & (1 << 4))
#define ata_id_has_devslp(id) ((id)[ATA_ID_FEATURE_SUPP] & (1 << 8))
-#define ata_id_has_ncq_autosense(id) \
- ((id)[ATA_ID_FEATURE_SUPP] & (1 << 7))
static inline bool ata_id_has_hipm(const u16 *id)
{
return false;
}
-static inline bool ata_id_has_sense_reporting(const u16 *id)
-{
- if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15)))
- return false;
- return id[ATA_ID_COMMAND_SET_3] & (1 << 6);
-}
-
-static inline bool ata_id_sense_reporting_enabled(const u16 *id)
-{
- if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15)))
- return false;
- return id[ATA_ID_COMMAND_SET_4] & (1 << 6);
-}
-
/**
* ata_id_major_version - get ATA level of drive
* @id: Identify data
u64 * info_out);
extern void scsi_build_sense_buffer(int desc, u8 *buf, u8 key, u8 asc, u8 ascq);
-extern void scsi_set_sense_information(u8 *buf, u64 info);
extern int scsi_ioctl_reset(struct scsi_device *, int __user *);
spin_unlock_irq(&callback_lock);
/* use trialcs->mems_allowed as a temp variable */
- update_nodemasks_hier(cs, &cs->mems_allowed);
+ update_nodemasks_hier(cs, &trialcs->mems_allowed);
done:
return retval;
}
projects / karo-tx-linux.git / commitdiff