#if defined(CONFIG_KERNEL_DEBUGGER)
+#ifndef CONFIG_MN10300_DEBUGGER_CACHE_NO_FLUSH
+extern void debugger_local_cache_flushinv(void);
+extern void debugger_local_cache_flushinv_one(u8 *);
+#else
+static inline void debugger_local_cache_flushinv(void) {}
+static inline void debugger_local_cache_flushinv_one(u8 *addr) {}
+#endif
+
#else /* CONFIG_KERNEL_DEBUGGER */
#endif /* CONFIG_KERNEL_DEBUGGER */
obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o
obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o
-ifeq ($(CONFIG_MN10300_CACHE_ENABLED),y)
-obj-$(CONFIG_GDBSTUB) += gdb-cache.o
-endif
-
obj-$(CONFIG_MN10300_RTC) += rtc.o
obj-$(CONFIG_PROFILE) += profile.o profile-low.o
obj-$(CONFIG_MODULES) += module.o
movbu d0,(GxICR(GDB_NMI_IPI))
movhu (GxICR(GDB_NMI_IPI)),d0
and ~EPSW_NMID,epsw # enable NMI
-#ifdef CONFIG_MN10300_CACHE_ENABLED
- mov (gdbstub_nmi_opr_type),d0
- cmp GDBSTUB_NMI_CACHE_PURGE,d0
- bne 4f # if not gdb cache purge, jump
-
- # gdb cache purge nmi ipi
- add -20,sp
- mov d1,(4,sp)
- mov a0,(8,sp)
- mov a1,(12,sp)
- mov mdr,d0
- mov d0,(16,sp)
- call gdbstub_local_purge_cache[],0
- mov 0x1,d0
- mov (CPUID),d1
- asl d1,d0
- mov gdbstub_nmi_cpumask,a0
- bclr d0,(a0)
- mov (4,sp),d1
- mov (8,sp),a0
- mov (12,sp),a1
- mov (16,sp),d0
- mov d0,mdr
- add 20,sp
- mov (sp),d0
- add 4,sp
- rti
-4:
-#endif /* CONFIG_MN10300_CACHE_ENABLED */
- # gdb wait nmi ipi
+
mov (sp),d0
SAVE_ALL
call gdbstub_nmi_wait[],0
+++ /dev/null
-###############################################################################
-#
-# MN10300 Low-level cache purging routines for gdbstub
-#
-# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
-# Written by David Howells (dhowells@redhat.com)
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public Licence
-# as published by the Free Software Foundation; either version
-# 2 of the Licence, or (at your option) any later version.
-#
-###############################################################################
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <asm/smp.h>
-#include <asm/cache.h>
-#include <asm/cpu-regs.h>
-#include <asm/exceptions.h>
-#include <asm/frame.inc>
-#include <asm/serial-regs.h>
-
- .text
-
-###############################################################################
-#
-# GDB stub cache purge
-#
-###############################################################################
- .type gdbstub_purge_cache,@function
-ENTRY(gdbstub_purge_cache)
- #######################################################################
- # read the addresses tagged in the cache's tag RAM and attempt to flush
- # those addresses specifically
- # - we rely on the hardware to filter out invalid tag entry addresses
- mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
- mov DCACHE_PURGE(0,0),a1 # dcache purge request address
- mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
-
-mn10300_dcache_flush_loop:
- mov (a0),d0
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
- or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
- # cache
- mov d0,(a1) # conditional purge
-
-mn10300_dcache_flush_skip:
- add L1_CACHE_BYTES,a0
- add L1_CACHE_BYTES,a1
- add -1,d1
- bne mn10300_dcache_flush_loop
-
-;; # unconditionally flush and invalidate the dcache
-;; mov DCACHE_PURGE(0,0),a1 # dcache purge request address
-;; mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of
-;; # entries
-;;
-;; gdbstub_purge_cache__dcache_loop:
-;; mov (a1),d0 # unconditional purge
-;;
-;; add L1_CACHE_BYTES,a1
-;; add -1,d1
-;; bne gdbstub_purge_cache__dcache_loop
-
- #######################################################################
- # now invalidate the icache
- mov CHCTR,a0
- movhu (a0),a1
-
- mov epsw,d1
- and ~EPSW_IE,epsw
- nop
- nop
-
- # disable the icache
- and ~CHCTR_ICEN,d0
- movhu d0,(a0)
-
- # and wait for it to calm down
- setlb
- movhu (a0),d0
- btst CHCTR_ICBUSY,d0
- lne
-
- # invalidate
- or CHCTR_ICINV,d0
- movhu d0,(a0)
-
- # wait for the cache to finish
- mov CHCTR,a0
- setlb
- movhu (a0),d0
- btst CHCTR_ICBUSY,d0
- lne
-
- # and reenable it
- movhu a1,(a0)
- movhu (a0),d0 # read back to flush
- # (SIGILLs all over without this)
-
- mov d1,epsw
-
- ret [],0
-
- .size gdbstub_purge_cache,.-gdbstub_purge_cache
#include <asm/system.h>
#include <asm/gdb-stub.h>
#include <asm/exceptions.h>
-#include <asm/cacheflush.h>
+#include <asm/debugger.h>
#include <asm/serial-regs.h>
#include <asm/busctl-regs.h>
#include <unit/leds.h>
* NB: We flush both caches, just to be sure...
*/
if (gdbstub_flush_caches)
- gdbstub_purge_cache();
+ debugger_local_cache_flushinv();
gdbstub_load_fpu();
mn10300_set_gdbleds(0);
help
Set if we need the icache to be invalidated, even if the dcache is in
write-through mode and doesn't need flushing.
+
+#
+# The kernel debugger gets its own separate cache flushing functions
+#
+config MN10300_DEBUGGER_CACHE_FLUSH_BY_TAG
+ def_bool y if KERNEL_DEBUGGER && \
+ MN10300_CACHE_WBACK && \
+ !MN10300_CACHE_SNOOP && \
+ MN10300_CACHE_MANAGE_BY_TAG
+ help
+ Set if the debugger needs to flush the dcache and invalidate the
+ icache using the cache tag registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_FLUSH_BY_REG
+ def_bool y if KERNEL_DEBUGGER && \
+ MN10300_CACHE_WBACK && \
+ !MN10300_CACHE_SNOOP && \
+ MN10300_CACHE_MANAGE_BY_REG
+ help
+ Set if the debugger needs to flush the dcache and invalidate the
+ icache using automatic purge registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_INV_BY_TAG
+ def_bool y if KERNEL_DEBUGGER && \
+ MN10300_CACHE_WTHRU && \
+ !MN10300_CACHE_SNOOP && \
+ MN10300_CACHE_MANAGE_BY_TAG
+ help
+ Set if the debugger needs to invalidate the icache using the cache
+ tag registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_INV_BY_REG
+ def_bool y if KERNEL_DEBUGGER && \
+ MN10300_CACHE_WTHRU && \
+ !MN10300_CACHE_SNOOP && \
+ MN10300_CACHE_MANAGE_BY_REG
+ help
+ Set if the debugger needs to invalidate the icache using automatic
+ purge registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_NO_FLUSH
+ def_bool y if KERNEL_DEBUGGER && \
+ (MN10300_CACHE_DISABLED || MN10300_CACHE_SNOOP)
+ help
+ Set if the debugger does not need to flush the dcache and/or
+ invalidate the icache to make breakpoints work.
cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_TAG) += cache-flush-by-tag.o
cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_REG) += cache-flush-by-reg.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_FLUSH_BY_TAG) += \
+ cache-dbg-flush-by-tag.o cache-dbg-inv-by-tag.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_FLUSH_BY_REG) += \
+ cache-dbg-flush-by-reg.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_TAG) += \
+ cache-dbg-inv-by-tag.o cache-dbg-inv.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_REG) += \
+ cache-dbg-inv-by-reg.o cache-dbg-inv.o
+
cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o
obj-y := \
--- /dev/null
+/* MN10300 CPU cache invalidation routines, using automatic purge registers
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+ .am33_2
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv(void)
+# Flush the entire data cache back to RAM and invalidate the icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv
+ .type debugger_local_cache_flushinv,@function
+debugger_local_cache_flushinv:
+ #
+ # firstly flush the dcache
+ #
+ movhu (CHCTR),d0
+ btst CHCTR_DCEN|CHCTR_ICEN,d0
+ beq debugger_local_cache_flushinv_end
+
+ mov DCPGCR,a0
+
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ or EPSW_NMID,epsw
+ nop
+
+ btst CHCTR_DCEN,d0
+ beq debugger_local_cache_flushinv_no_dcache
+
+ # wait for busy bit of area purge
+ setlb
+ mov (a0),d0
+ btst DCPGCR_DCPGBSY,d0
+ lne
+
+ # set mask
+ clr d0
+ mov d0,(DCPGMR)
+
+ # area purge
+ #
+ # DCPGCR = DCPGCR_DCP
+ #
+ mov DCPGCR_DCP,d0
+ mov d0,(a0)
+
+ # wait for busy bit of area purge
+ setlb
+ mov (a0),d0
+ btst DCPGCR_DCPGBSY,d0
+ lne
+
+debugger_local_cache_flushinv_no_dcache:
+ #
+ # secondly, invalidate the icache if it is enabled
+ #
+ mov CHCTR,a0
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq debugger_local_cache_flushinv_done
+
+ invalidate_icache 0
+
+debugger_local_cache_flushinv_done:
+ mov d1,epsw
+
+debugger_local_cache_flushinv_end:
+ ret [],0
+ .size debugger_local_cache_flushinv,.-debugger_local_cache_flushinv
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv_one
+ .type debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one:
+ movhu (CHCTR),d1
+ btst CHCTR_DCEN|CHCTR_ICEN,d1
+ beq debugger_local_cache_flushinv_one_end
+ btst CHCTR_DCEN,d1
+ beq debugger_local_cache_flushinv_one_no_dcache
+
+ # round cacheline addr down
+ and L1_CACHE_TAG_MASK,d0
+ mov d0,a1
+ mov d0,d1
+
+ # determine the dcache purge control reg address
+ mov DCACHE_PURGE(0,0),a0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0
+
+ # retain valid entries in the cache
+ or L1_CACHE_TAG_VALID,d1
+
+ # conditionally purge this line in all ways
+ mov d1,(L1_CACHE_WAYDISP*0,a0)
+
+debugger_local_cache_flushinv_no_dcache:
+ #
+ # now try to flush the icache
+ #
+ mov CHCTR,a0
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq mn10300_local_icache_inv_range_reg_end
+
+ LOCAL_CLI_SAVE(d1)
+
+ mov ICIVCR,a0
+
+ # wait for the invalidator to quiesce
+ setlb
+ mov (a0),d0
+ btst ICIVCR_ICIVBSY,d0
+ lne
+
+ # set the mask
+ mov L1_CACHE_TAG_MASK,d0
+ mov d0,(ICIVMR)
+
+ # invalidate the cache line at the given address
+ or ICIVCR_ICI,a1
+ mov a1,(a0)
+
+ # wait for the invalidator to quiesce again
+ setlb
+ mov (a0),d0
+ btst ICIVCR_ICIVBSY,d0
+ lne
+
+ LOCAL_IRQ_RESTORE(d1)
+
+debugger_local_cache_flushinv_one_end:
+ ret [],0
+ .size debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one
--- /dev/null
+/* MN10300 CPU cache invalidation routines, using direct tag flushing
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+ .am33_2
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv(void)
+#
+# Flush the entire data cache back to RAM and invalidate the icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv
+ .type debugger_local_cache_flushinv,@function
+debugger_local_cache_flushinv:
+ #
+ # firstly flush the dcache
+ #
+ movhu (CHCTR),d0
+ btst CHCTR_DCEN|CHCTR_ICEN,d0
+ beq debugger_local_cache_flushinv_end
+
+ btst CHCTR_DCEN,d0
+ beq debugger_local_cache_flushinv_no_dcache
+
+ # read the addresses tagged in the cache's tag RAM and attempt to flush
+ # those addresses specifically
+ # - we rely on the hardware to filter out invalid tag entry addresses
+ mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
+ mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+ mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,e0 # total number of entries
+
+mn10300_local_dcache_flush_loop:
+ mov (a0),d0
+ and L1_CACHE_TAG_MASK,d0
+ or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
+ # cache
+ mov d0,(a1) # conditional purge
+
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ add -1,e0
+ bne mn10300_local_dcache_flush_loop
+
+debugger_local_cache_flushinv_no_dcache:
+ #
+ # secondly, invalidate the icache if it is enabled
+ #
+ mov CHCTR,a0
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq debugger_local_cache_flushinv_end
+
+ invalidate_icache 1
+
+debugger_local_cache_flushinv_end:
+ ret [],0
+ .size debugger_local_cache_flushinv,.-debugger_local_cache_flushinv
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv_one
+ .type debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one:
+ movhu (CHCTR),d1
+ btst CHCTR_DCEN|CHCTR_ICEN,d1
+ beq debugger_local_cache_flushinv_one_end
+ btst CHCTR_DCEN,d1
+ beq debugger_local_cache_flushinv_one_icache
+
+ # round cacheline addr down
+ and L1_CACHE_TAG_MASK,d0
+ mov d0,a1
+
+ # determine the dcache purge control reg address
+ mov DCACHE_PURGE(0,0),a0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0
+
+ # retain valid entries in the cache
+ or L1_CACHE_TAG_VALID,a1
+
+ # conditionally purge this line in all ways
+ mov a1,(L1_CACHE_WAYDISP*0,a0)
+
+ # now go and do the icache
+ bra debugger_local_cache_flushinv_one_icache
+
+debugger_local_cache_flushinv_one_end:
+ ret [],0
+ .size debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one
--- /dev/null
+/* MN10300 CPU cache invalidation routines, using automatic purge registers
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+ .am33_2
+
+ .globl debugger_local_cache_flushinv_one
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv_one
+ .type debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one:
+ mov d0,a1
+
+ mov CHCTR,a0
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq mn10300_local_icache_inv_range_reg_end
+
+ LOCAL_CLI_SAVE(d1)
+
+ mov ICIVCR,a0
+
+ # wait for the invalidator to quiesce
+ setlb
+ mov (a0),d0
+ btst ICIVCR_ICIVBSY,d0
+ lne
+
+ # set the mask
+ mov ~L1_CACHE_TAG_MASK,d0
+ mov d0,(ICIVMR)
+
+ # invalidate the cache line at the given address
+ and ~L1_CACHE_TAG_MASK,a1
+ or ICIVCR_ICI,a1
+ mov a1,(a0)
+
+ # wait for the invalidator to quiesce again
+ setlb
+ mov (a0),d0
+ btst ICIVCR_ICIVBSY,d0
+ lne
+
+ LOCAL_IRQ_RESTORE(d1)
+
+mn10300_local_icache_inv_range_reg_end:
+ ret [],0
+ .size debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one
--- /dev/null
+/* MN10300 CPU cache invalidation routines, using direct tag flushing
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+ .am33_2
+
+ .globl debugger_local_cache_flushinv_one_icache
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv_one_icache
+ .type debugger_local_cache_flushinv_one_icache,@function
+debugger_local_cache_flushinv_one_icache:
+ movm [d3,a2],(sp)
+
+ mov CHCTR,a2
+ movhu (a2),d0
+ btst CHCTR_ICEN,d0
+ beq debugger_local_cache_flushinv_one_icache_end
+
+ mov d0,a1
+ and L1_CACHE_TAG_MASK,a1
+
+ # read the tags from the tag RAM, and if they indicate a matching valid
+ # cache line then we invalidate that line
+ mov ICACHE_TAG(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting icache tag RAM
+ # access address
+
+ and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base
+ or L1_CACHE_TAG_VALID,a1
+ mov L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_VALID,d1
+
+ LOCAL_CLI_SAVE(d3)
+
+ # disable the icache
+ movhu (a2),d0
+ and ~CHCTR_ICEN,d0
+ movhu d0,(a2)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a2),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # check all the way tags for this cache entry
+ mov (a0),d0 # read the tag in the way 0 slot
+ xor a1,d0
+ and d1,d0
+ beq debugger_local_icache_kill # jump if matched
+
+ add L1_CACHE_WAYDISP,a0
+ mov (a0),d0 # read the tag in the way 1 slot
+ xor a1,d0
+ and d1,d0
+ beq debugger_local_icache_kill # jump if matched
+
+ add L1_CACHE_WAYDISP,a0
+ mov (a0),d0 # read the tag in the way 2 slot
+ xor a1,d0
+ and d1,d0
+ beq debugger_local_icache_kill # jump if matched
+
+ add L1_CACHE_WAYDISP,a0
+ mov (a0),d0 # read the tag in the way 3 slot
+ xor a1,d0
+ and d1,d0
+ bne debugger_local_icache_finish # jump if not matched
+
+debugger_local_icache_kill:
+ mov d0,(a0) # kill the tag (D0 is 0 at this point)
+
+debugger_local_icache_finish:
+ # wait for the cache to finish what it's doing
+ setlb
+ movhu (a2),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # and reenable it
+ or CHCTR_ICEN,d0
+ movhu d0,(a2)
+ movhu (a2),d0
+
+ # re-enable interrupts
+ LOCAL_IRQ_RESTORE(d3)
+
+debugger_local_cache_flushinv_one_icache_end:
+ ret [d3,a2],8
+ .size debugger_local_cache_flushinv_one_icache,.-debugger_local_cache_flushinv_one_icache
+
+#ifdef CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_TAG
+ .globl debugger_local_cache_flushinv_one
+ .type debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one = debugger_local_cache_flushinv_one_icache
+#endif
--- /dev/null
+/* MN10300 CPU cache invalidation routines
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+ .am33_2
+
+ .globl debugger_local_cache_flushinv
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv(void)
+#
+# Invalidate the entire icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv
+ .type debugger_local_cache_flushinv,@function
+debugger_local_cache_flushinv:
+ #
+ # we only need to invalidate the icache in this cache mode
+ #
+ mov CHCTR,a0
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq debugger_local_cache_flushinv_end
+
+ invalidate_icache 1
+
+debugger_local_cache_flushinv_end:
+ ret [],0
+ .size debugger_local_cache_flushinv,.-debugger_local_cache_flushinv
mn10300_local_dcache_flush_loop:
mov (a0),d0
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ and L1_CACHE_TAG_MASK,d0
or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
# cache
mov d0,(a1) # conditional purge
1:
# round start addr down
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ and L1_CACHE_TAG_MASK,d0
mov d0,a1
add L1_CACHE_BYTES,d1 # round end addr up
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+ and L1_CACHE_TAG_MASK,d1
# write a request to flush all instances of an address from the cache
mov DCACHE_PURGE(0,0),a0
bra mn10300_local_dcache_flush_inv
1:
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
- # addr down
+ and L1_CACHE_TAG_MASK,d0 # round start addr down
mov d0,a1
- add L1_CACHE_BYTES,d1 # round end addr up
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_MASK,d1
# write a request to flush and invalidate all instances of an address
# from the cache
# and if they're not cacheline-aligned, we must flush any bits outside
# the range that share cachelines with stuff inside the range
#ifdef CONFIG_MN10300_CACHE_WBACK
- btst ~(L1_CACHE_BYTES-1),d0
+ btst ~L1_CACHE_TAG_MASK,d0
bne 1f
- btst ~(L1_CACHE_BYTES-1),d1
+ btst ~L1_CACHE_TAG_MASK,d1
beq 2f
1:
bra mn10300_local_dcache_flush_inv_range
# writeback mode, in which case we would be in flush and invalidate by
# now
#ifndef CONFIG_MN10300_CACHE_WBACK
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
- # addr down
+ and L1_CACHE_TAG_MASK,d0 # round start addr down
mov L1_CACHE_BYTES-1,d2
add d2,d1
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 # round end addr up
+ and L1_CACHE_TAG_MASK,d1 # round end addr up
#endif /* !CONFIG_MN10300_CACHE_WBACK */
sub d0,d1,d2 # calculate the total size
# and if they're not cacheline-aligned, we must flush any bits outside
# the range that share cachelines with stuff inside the range
#ifdef CONFIG_MN10300_CACHE_WBACK
- btst ~(L1_CACHE_BYTES-1),d0
+ btst ~L1_CACHE_TAG_MASK,d0
bne 1f
- btst ~(L1_CACHE_BYTES-1),d1
+ btst ~L1_CACHE_TAG_MASK,d1
beq 2f
1:
bra mn10300_local_dcache_flush_inv_range
beq mn10300_local_dcache_inv_range_end
#ifndef CONFIG_MN10300_CACHE_WBACK
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
- # addr down
+ and L1_CACHE_TAG_MASK,d0 # round start addr down
add L1_CACHE_BYTES,d1 # round end addr up
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+ and L1_CACHE_TAG_MASK,d1
#endif /* !CONFIG_MN10300_CACHE_WBACK */
mov d0,a1
#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */
#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */
#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */
+#define L1_CACHE_TAG_MASK +(L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY)
/*
* specification of the interval between interrupt checking intervals whilst
#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */
#define L1_CACHE_TAG_ENTRY 0x00000fe0 /* cache tag entry address mask */
#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */
+#define L1_CACHE_TAG_MASK +(L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY)
/*
* specification of the interval between interrupt checking intervals whilst
projects / karo-tx-linux.git / commitdiff