--- /dev/null
+Broadcom BCM7038 PWM controller (BCM7xxx Set Top Box PWM controller)
+
+Required properties:
+
+- compatible: must be "brcm,bcm7038-pwm"
+- reg: physical base address and length for this controller
+- #pwm-cells: should be 2. See pwm.txt in this directory for a description
+ of the cells format
+- clocks: a phandle to the reference clock for this block which is fed through
+ its internal variable clock frequency generator
+
+
+Example:
+
+ pwm: pwm@f0408000 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0xf0408000 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_fixed>;
+ };
--- /dev/null
+Berlin PWM controller
+
+Required properties:
+- compatible: should be "marvell,berlin-pwm"
+- reg: physical base address and length of the controller's registers
+- clocks: phandle to the input clock
+- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
+ the cells format.
+
+Example:
+
+pwm: pwm@f7f20000 {
+ compatible = "marvell,berlin-pwm";
+ reg = <0xf7f20000 0x40>;
+ clocks = <&chip_clk CLKID_CFG>;
+ #pwm-cells = <3>;
+}
--- /dev/null
+MediaTek display PWM controller
+
+Required properties:
+ - compatible: should be "mediatek,<name>-disp-pwm":
+ - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
+ - "mediatek,mt6595-disp-pwm": found on mt6595 SoC.
+ - reg: physical base address and length of the controller's registers.
+ - #pwm-cells: must be 2. See pwm.txt in this directory for a description of
+ the cell format.
+ - clocks: phandle and clock specifier of the PWM reference clock.
+ - clock-names: must contain the following:
+ - "main": clock used to generate PWM signals.
+ - "mm": sync signals from the modules of mmsys.
+ - pinctrl-names: Must contain a "default" entry.
+ - pinctrl-0: One property must exist for each entry in pinctrl-names.
+ See pinctrl/pinctrl-bindings.txt for details of the property values.
+
+Example:
+ pwm0: pwm@1401e000 {
+ compatible = "mediatek,mt8173-disp-pwm",
+ "mediatek,mt6595-disp-pwm";
+ reg = <0 0x1401e000 0 0x1000>;
+ #pwm-cells = <2>;
+ clocks = <&mmsys CLK_MM_DISP_PWM026M>,
+ <&mmsys CLK_MM_DISP_PWM0MM>;
+ clock-names = "main", "mm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&disp_pwm0_pins>;
+ };
+
+ backlight_lcd: backlight_lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 1000000>;
+ brightness-levels = <
+ 0 16 32 48 64 80 96 112
+ 128 144 160 176 192 208 224 240
+ 255
+ >;
+ default-brightness-level = <9>;
+ power-supply = <&mt6397_vio18_reg>;
+ enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
+ };
--- /dev/null
+* Renesas R-Car PWM Timer Controller
+
+Required Properties:
+- compatible: should be one of the following.
+ - "renesas,pwm-rcar": for generic R-Car compatible PWM Timer
+ - "renesas,pwm-r8a7778": for R-Car M1A
+ - "renesas,pwm-r8a7779": for R-Car H1
+ - "renesas,pwm-r8a7790": for R-Car H2
+ - "renesas,pwm-r8a7791": for R-Car M2-W
+ - "renesas,pwm-r8a7794": for R-Car E2
+- reg: base address and length of the registers block for the PWM.
+- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
+ the cells format.
+- clocks: clock phandle and specifier pair.
+- pinctrl-0: phandle, referring to a default pin configuration node.
+- pinctrl-names: Set to "default".
+
+Example: R8A7790 (R-Car H2) PWM Timer node
+
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&mstp5_clks R8A7790_CLK_PWM>;
+ pinctrl-0 = <&pwm0_pins>;
+ pinctrl-names = "default";
+ };
To compile this driver as a module, choose M here: the module
will be called pwm-bcm2835.
+config PWM_BERLIN
+ tristate "Marvell Berlin PWM support"
+ depends on ARCH_BERLIN
+ help
+ PWM framework driver for Marvell Berlin SoCs.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-berlin.
+
config PWM_BFIN
tristate "Blackfin PWM support"
depends on BFIN_GPTIMERS
To compile this driver as a module, choose M here: the module
will be called pwm-bfin.
+config PWM_BRCMSTB
+ tristate "Broadcom STB PWM support"
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC
+ help
+ Generic PWM framework driver for the Broadcom Set-top-Box
+ SoCs (BCM7xxx).
+
+ To compile this driver as a module, choose M Here: the module
+ will be called pwm-brcmstb.c.
+
config PWM_CLPS711X
tristate "CLPS711X PWM support"
depends on ARCH_CLPS711X || COMPILE_TEST
To compile this driver as a module, choose M here: the module
will be called pwm-lpss-platform.
+config PWM_MTK_DISP
+ tristate "MediaTek display PWM driver"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Generic PWM framework driver for MediaTek disp-pwm device.
+ The PWM is used to control the backlight brightness for display.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-mtk-disp.
+
config PWM_MXS
tristate "Freescale MXS PWM support"
depends on ARCH_MXS && OF
To compile this driver as a module, choose M here: the module
will be called pwm-pxa.
+config PWM_RCAR
+ tristate "Renesas R-Car PWM support"
+ depends on ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This driver exposes the PWM Timer controller found in Renesas
+ R-Car chips through the PWM API.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-rcar.
+
config PWM_RENESAS_TPU
tristate "Renesas TPU PWM support"
depends on ARCH_SHMOBILE || COMPILE_TEST
config PWM_TIECAP
tristate "ECAP PWM support"
- depends on SOC_AM33XX || ARCH_DAVINCI_DA8XX
+ depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX
help
PWM driver support for the ECAP APWM controller found on AM33XX
TI SOC
config PWM_TIEHRPWM
tristate "EHRPWM PWM support"
- depends on SOC_AM33XX || ARCH_DAVINCI_DA8XX
+ depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX
help
PWM driver support for the EHRPWM controller found on AM33XX
TI SOC
config PWM_TIPWMSS
bool
- default y if SOC_AM33XX && (PWM_TIECAP || PWM_TIEHRPWM)
+ default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM)
help
PWM Subsystem driver support for AM33xx SOC.
obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o
obj-$(CONFIG_PWM_BCM2835) += pwm-bcm2835.o
+obj-$(CONFIG_PWM_BERLIN) += pwm-berlin.o
obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
+obj-$(CONFIG_PWM_BRCMSTB) += pwm-brcmstb.o
obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
obj-$(CONFIG_PWM_CRC) += pwm-crc.o
obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o
obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o
obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o
obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
+obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o
obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
+obj-$(CONFIG_PWM_RCAR) += pwm-rcar.o
obj-$(CONFIG_PWM_RENESAS_TPU) += pwm-renesas-tpu.o
obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o
obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
.compatible = "atmel,at91sam9x5-hlcdc",
.data = &atmel_hlcdc_pwm_at91sam9x5_errata,
},
+ {
+ .compatible = "atmel,sama5d2-hlcdc",
+ },
{
.compatible = "atmel,sama5d3-hlcdc",
.data = &atmel_hlcdc_pwm_sama5d3_errata,
},
{ /* sentinel */ },
};
+MODULE_DEVICE_TABLE(of, atmel_hlcdc_dt_ids);
static int atmel_hlcdc_pwm_probe(struct platform_device *pdev)
{
--- /dev/null
+/*
+ * Marvell Berlin PWM driver
+ *
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Antoine Tenart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define BERLIN_PWM_EN 0x0
+#define BERLIN_PWM_ENABLE BIT(0)
+#define BERLIN_PWM_CONTROL 0x4
+#define BERLIN_PWM_PRESCALE_MASK 0x7
+#define BERLIN_PWM_PRESCALE_MAX 4096
+#define BERLIN_PWM_INVERT_POLARITY BIT(3)
+#define BERLIN_PWM_DUTY 0x8
+#define BERLIN_PWM_TCNT 0xc
+#define BERLIN_PWM_MAX_TCNT 65535
+
+struct berlin_pwm_chip {
+ struct pwm_chip chip;
+ struct clk *clk;
+ void __iomem *base;
+};
+
+static inline struct berlin_pwm_chip *to_berlin_pwm_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct berlin_pwm_chip, chip);
+}
+
+static const u32 prescaler_table[] = {
+ 1, 4, 8, 16, 64, 256, 1024, 4096
+};
+
+static inline u32 berlin_pwm_readl(struct berlin_pwm_chip *chip,
+ unsigned int channel, unsigned long offset)
+{
+ return readl_relaxed(chip->base + channel * 0x10 + offset);
+}
+
+static inline void berlin_pwm_writel(struct berlin_pwm_chip *chip,
+ unsigned int channel, u32 value,
+ unsigned long offset)
+{
+ writel_relaxed(value, chip->base + channel * 0x10 + offset);
+}
+
+static int berlin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm_dev,
+ int duty_ns, int period_ns)
+{
+ struct berlin_pwm_chip *pwm = to_berlin_pwm_chip(chip);
+ unsigned int prescale;
+ u32 value, duty, period;
+ u64 cycles, tmp;
+
+ cycles = clk_get_rate(pwm->clk);
+ cycles *= period_ns;
+ do_div(cycles, NSEC_PER_SEC);
+
+ for (prescale = 0; prescale < ARRAY_SIZE(prescaler_table); prescale++) {
+ tmp = cycles;
+ do_div(tmp, prescaler_table[prescale]);
+
+ if (tmp <= BERLIN_PWM_MAX_TCNT)
+ break;
+ }
+
+ if (tmp > BERLIN_PWM_MAX_TCNT)
+ return -ERANGE;
+
+ period = tmp;
+ cycles = tmp * duty_ns;
+ do_div(cycles, period_ns);
+ duty = cycles;
+
+ value = berlin_pwm_readl(pwm, pwm_dev->hwpwm, BERLIN_PWM_CONTROL);
+ value &= ~BERLIN_PWM_PRESCALE_MASK;
+ value |= prescale;
+ berlin_pwm_writel(pwm, pwm_dev->hwpwm, value, BERLIN_PWM_CONTROL);
+
+ berlin_pwm_writel(pwm, pwm_dev->hwpwm, duty, BERLIN_PWM_DUTY);
+ berlin_pwm_writel(pwm, pwm_dev->hwpwm, period, BERLIN_PWM_TCNT);
+
+ return 0;
+}
+
+static int berlin_pwm_set_polarity(struct pwm_chip *chip,
+ struct pwm_device *pwm_dev,
+ enum pwm_polarity polarity)
+{
+ struct berlin_pwm_chip *pwm = to_berlin_pwm_chip(chip);
+ u32 value;
+
+ value = berlin_pwm_readl(pwm, pwm_dev->hwpwm, BERLIN_PWM_CONTROL);
+
+ if (polarity == PWM_POLARITY_NORMAL)
+ value &= ~BERLIN_PWM_INVERT_POLARITY;
+ else
+ value |= BERLIN_PWM_INVERT_POLARITY;
+
+ berlin_pwm_writel(pwm, pwm_dev->hwpwm, value, BERLIN_PWM_CONTROL);
+
+ return 0;
+}
+
+static int berlin_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm_dev)
+{
+ struct berlin_pwm_chip *pwm = to_berlin_pwm_chip(chip);
+ u32 value;
+
+ value = berlin_pwm_readl(pwm, pwm_dev->hwpwm, BERLIN_PWM_EN);
+ value |= BERLIN_PWM_ENABLE;
+ berlin_pwm_writel(pwm, pwm_dev->hwpwm, value, BERLIN_PWM_EN);
+
+ return 0;
+}
+
+static void berlin_pwm_disable(struct pwm_chip *chip,
+ struct pwm_device *pwm_dev)
+{
+ struct berlin_pwm_chip *pwm = to_berlin_pwm_chip(chip);
+ u32 value;
+
+ value = berlin_pwm_readl(pwm, pwm_dev->hwpwm, BERLIN_PWM_EN);
+ value &= ~BERLIN_PWM_ENABLE;
+ berlin_pwm_writel(pwm, pwm_dev->hwpwm, value, BERLIN_PWM_EN);
+}
+
+static const struct pwm_ops berlin_pwm_ops = {
+ .config = berlin_pwm_config,
+ .set_polarity = berlin_pwm_set_polarity,
+ .enable = berlin_pwm_enable,
+ .disable = berlin_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id berlin_pwm_match[] = {
+ { .compatible = "marvell,berlin-pwm" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, berlin_pwm_match);
+
+static int berlin_pwm_probe(struct platform_device *pdev)
+{
+ struct berlin_pwm_chip *pwm;
+ struct resource *res;
+ int ret;
+
+ pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
+ if (!pwm)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pwm->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pwm->base))
+ return PTR_ERR(pwm->base);
+
+ pwm->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pwm->clk))
+ return PTR_ERR(pwm->clk);
+
+ ret = clk_prepare_enable(pwm->clk);
+ if (ret)
+ return ret;
+
+ pwm->chip.dev = &pdev->dev;
+ pwm->chip.ops = &berlin_pwm_ops;
+ pwm->chip.base = -1;
+ pwm->chip.npwm = 4;
+ pwm->chip.can_sleep = true;
+ pwm->chip.of_xlate = of_pwm_xlate_with_flags;
+ pwm->chip.of_pwm_n_cells = 3;
+
+ ret = pwmchip_add(&pwm->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+ clk_disable_unprepare(pwm->clk);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, pwm);
+
+ return 0;
+}
+
+static int berlin_pwm_remove(struct platform_device *pdev)
+{
+ struct berlin_pwm_chip *pwm = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = pwmchip_remove(&pwm->chip);
+ clk_disable_unprepare(pwm->clk);
+
+ return ret;
+}
+
+static struct platform_driver berlin_pwm_driver = {
+ .probe = berlin_pwm_probe,
+ .remove = berlin_pwm_remove,
+ .driver = {
+ .name = "berlin-pwm",
+ .of_match_table = berlin_pwm_match,
+ },
+};
+module_platform_driver(berlin_pwm_driver);
+
+MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell Berlin PWM driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * Broadcom BCM7038 PWM driver
+ * Author: Florian Fainelli
+ *
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/spinlock.h>
+
+#define PWM_CTRL 0x00
+#define CTRL_START BIT(0)
+#define CTRL_OEB BIT(1)
+#define CTRL_FORCE_HIGH BIT(2)
+#define CTRL_OPENDRAIN BIT(3)
+#define CTRL_CHAN_OFFS 4
+
+#define PWM_CTRL2 0x04
+#define CTRL2_OUT_SELECT BIT(0)
+
+#define PWM_CH_SIZE 0x8
+
+#define PWM_CWORD_MSB(ch) (0x08 + ((ch) * PWM_CH_SIZE))
+#define PWM_CWORD_LSB(ch) (0x0c + ((ch) * PWM_CH_SIZE))
+
+/* Number of bits for the CWORD value */
+#define CWORD_BIT_SIZE 16
+
+/*
+ * Maximum control word value allowed when variable-frequency PWM is used as a
+ * clock for the constant-frequency PMW.
+ */
+#define CONST_VAR_F_MAX 32768
+#define CONST_VAR_F_MIN 1
+
+#define PWM_ON(ch) (0x18 + ((ch) * PWM_CH_SIZE))
+#define PWM_ON_MIN 1
+#define PWM_PERIOD(ch) (0x1c + ((ch) * PWM_CH_SIZE))
+#define PWM_PERIOD_MIN 0
+
+#define PWM_ON_PERIOD_MAX 0xff
+
+struct brcmstb_pwm {
+ void __iomem *base;
+ spinlock_t lock;
+ struct clk *clk;
+ struct pwm_chip chip;
+};
+
+static inline u32 brcmstb_pwm_readl(struct brcmstb_pwm *p,
+ unsigned int offset)
+{
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+ return __raw_readl(p->base + offset);
+ else
+ return readl_relaxed(p->base + offset);
+}
+
+static inline void brcmstb_pwm_writel(struct brcmstb_pwm *p, u32 value,
+ unsigned int offset)
+{
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+ __raw_writel(value, p->base + offset);
+ else
+ writel_relaxed(value, p->base + offset);
+}
+
+static inline struct brcmstb_pwm *to_brcmstb_pwm(struct pwm_chip *chip)
+{
+ return container_of(chip, struct brcmstb_pwm, chip);
+}
+
+/*
+ * Fv is derived from the variable frequency output. The variable frequency
+ * output is configured using this formula:
+ *
+ * W = cword, if cword < 2 ^ 15 else 16-bit 2's complement of cword
+ *
+ * Fv = W x 2 ^ -16 x 27Mhz (reference clock)
+ *
+ * The period is: (period + 1) / Fv and "on" time is on / (period + 1)
+ *
+ * The PWM core framework specifies that the "duty_ns" parameter is in fact the
+ * "on" time, so this translates directly into our HW programming here.
+ */
+static int brcmstb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct brcmstb_pwm *p = to_brcmstb_pwm(chip);
+ unsigned long pc, dc, cword = CONST_VAR_F_MAX;
+ unsigned int channel = pwm->hwpwm;
+ u32 value;
+
+ /*
+ * If asking for a duty_ns equal to period_ns, we need to substract
+ * the period value by 1 to make it shorter than the "on" time and
+ * produce a flat 100% duty cycle signal, and max out the "on" time
+ */
+ if (duty_ns == period_ns) {
+ dc = PWM_ON_PERIOD_MAX;
+ pc = PWM_ON_PERIOD_MAX - 1;
+ goto done;
+ }
+
+ while (1) {
+ u64 rate, tmp;
+
+ /*
+ * Calculate the base rate from base frequency and current
+ * cword
+ */
+ rate = (u64)clk_get_rate(p->clk) * (u64)cword;
+ do_div(rate, 1 << CWORD_BIT_SIZE);
+
+ tmp = period_ns * rate;
+ do_div(tmp, NSEC_PER_SEC);
+ pc = tmp;
+
+ tmp = (duty_ns + 1) * rate;
+ do_div(tmp, NSEC_PER_SEC);
+ dc = tmp;
+
+ /*
+ * We can be called with separate duty and period updates,
+ * so do not reject dc == 0 right away
+ */
+ if (pc == PWM_PERIOD_MIN || (dc < PWM_ON_MIN && duty_ns))
+ return -EINVAL;
+
+ /* We converged on a calculation */
+ if (pc <= PWM_ON_PERIOD_MAX && dc <= PWM_ON_PERIOD_MAX)
+ break;
+
+ /*
+ * The cword needs to be a power of 2 for the variable
+ * frequency generator to output a 50% duty cycle variable
+ * frequency which is used as input clock to the fixed
+ * frequency generator.
+ */
+ cword >>= 1;
+
+ /*
+ * Desired periods are too large, we do not have a divider
+ * for them
+ */
+ if (cword < CONST_VAR_F_MIN)
+ return -EINVAL;
+ }
+
+done:
+ /*
+ * Configure the defined "cword" value to have the variable frequency
+ * generator output a base frequency for the constant frequency
+ * generator to derive from.
+ */
+ spin_lock(&p->lock);
+ brcmstb_pwm_writel(p, cword >> 8, PWM_CWORD_MSB(channel));
+ brcmstb_pwm_writel(p, cword & 0xff, PWM_CWORD_LSB(channel));
+
+ /* Select constant frequency signal output */
+ value = brcmstb_pwm_readl(p, PWM_CTRL2);
+ value |= CTRL2_OUT_SELECT << (channel * CTRL_CHAN_OFFS);
+ brcmstb_pwm_writel(p, value, PWM_CTRL2);
+
+ /* Configure on and period value */
+ brcmstb_pwm_writel(p, pc, PWM_PERIOD(channel));
+ brcmstb_pwm_writel(p, dc, PWM_ON(channel));
+ spin_unlock(&p->lock);
+
+ return 0;
+}
+
+static inline void brcmstb_pwm_enable_set(struct brcmstb_pwm *p,
+ unsigned int channel, bool enable)
+{
+ unsigned int shift = channel * CTRL_CHAN_OFFS;
+ u32 value;
+
+ spin_lock(&p->lock);
+ value = brcmstb_pwm_readl(p, PWM_CTRL);
+
+ if (enable) {
+ value &= ~(CTRL_OEB << shift);
+ value |= (CTRL_START | CTRL_OPENDRAIN) << shift;
+ } else {
+ value &= ~((CTRL_START | CTRL_OPENDRAIN) << shift);
+ value |= CTRL_OEB << shift;
+ }
+
+ brcmstb_pwm_writel(p, value, PWM_CTRL);
+ spin_unlock(&p->lock);
+}
+
+static int brcmstb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct brcmstb_pwm *p = to_brcmstb_pwm(chip);
+
+ brcmstb_pwm_enable_set(p, pwm->hwpwm, true);
+
+ return 0;
+}
+
+static void brcmstb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct brcmstb_pwm *p = to_brcmstb_pwm(chip);
+
+ brcmstb_pwm_enable_set(p, pwm->hwpwm, false);
+}
+
+static const struct pwm_ops brcmstb_pwm_ops = {
+ .config = brcmstb_pwm_config,
+ .enable = brcmstb_pwm_enable,
+ .disable = brcmstb_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id brcmstb_pwm_of_match[] = {
+ { .compatible = "brcm,bcm7038-pwm", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, brcmstb_pwm_of_match);
+
+static int brcmstb_pwm_probe(struct platform_device *pdev)
+{
+ struct brcmstb_pwm *p;
+ struct resource *res;
+ int ret;
+
+ p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+
+ spin_lock_init(&p->lock);
+
+ p->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(p->clk)) {
+ dev_err(&pdev->dev, "failed to obtain clock\n");
+ return PTR_ERR(p->clk);
+ }
+
+ ret = clk_prepare_enable(p->clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to enable clock: %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, p);
+
+ p->chip.dev = &pdev->dev;
+ p->chip.ops = &brcmstb_pwm_ops;
+ p->chip.base = -1;
+ p->chip.npwm = 2;
+ p->chip.can_sleep = true;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ p->base = devm_ioremap_resource(&pdev->dev, res);
+ if (!p->base) {
+ ret = -ENOMEM;
+ goto out_clk;
+ }
+
+ ret = pwmchip_add(&p->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+ goto out_clk;
+ }
+
+ return 0;
+
+out_clk:
+ clk_disable_unprepare(p->clk);
+ return ret;
+}
+
+static int brcmstb_pwm_remove(struct platform_device *pdev)
+{
+ struct brcmstb_pwm *p = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = pwmchip_remove(&p->chip);
+ clk_disable_unprepare(p->clk);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcmstb_pwm_suspend(struct device *dev)
+{
+ struct brcmstb_pwm *p = dev_get_drvdata(dev);
+
+ clk_disable(p->clk);
+
+ return 0;
+}
+
+static int brcmstb_pwm_resume(struct device *dev)
+{
+ struct brcmstb_pwm *p = dev_get_drvdata(dev);
+
+ clk_enable(p->clk);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(brcmstb_pwm_pm_ops, brcmstb_pwm_suspend,
+ brcmstb_pwm_resume);
+
+static struct platform_driver brcmstb_pwm_driver = {
+ .probe = brcmstb_pwm_probe,
+ .remove = brcmstb_pwm_remove,
+ .driver = {
+ .name = "pwm-brcmstb",
+ .of_match_table = brcmstb_pwm_of_match,
+ .pm = &brcmstb_pwm_pm_ops,
+ },
+};
+module_platform_driver(brcmstb_pwm_driver);
+
+MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>");
+MODULE_DESCRIPTION("Broadcom STB PWM driver");
+MODULE_ALIAS("platform:pwm-brcmstb");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * MediaTek display pulse-width-modulation controller driver.
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: YH Huang <yh.huang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define DISP_PWM_EN 0x00
+#define PWM_ENABLE_MASK BIT(0)
+
+#define DISP_PWM_COMMIT 0x08
+#define PWM_COMMIT_MASK BIT(0)
+
+#define DISP_PWM_CON_0 0x10
+#define PWM_CLKDIV_SHIFT 16
+#define PWM_CLKDIV_MAX 0x3ff
+#define PWM_CLKDIV_MASK (PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
+
+#define DISP_PWM_CON_1 0x14
+#define PWM_PERIOD_BIT_WIDTH 12
+#define PWM_PERIOD_MASK ((1 << PWM_PERIOD_BIT_WIDTH) - 1)
+
+#define PWM_HIGH_WIDTH_SHIFT 16
+#define PWM_HIGH_WIDTH_MASK (0x1fff << PWM_HIGH_WIDTH_SHIFT)
+
+struct mtk_disp_pwm {
+ struct pwm_chip chip;
+ struct clk *clk_main;
+ struct clk *clk_mm;
+ void __iomem *base;
+};
+
+static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
+{
+ return container_of(chip, struct mtk_disp_pwm, chip);
+}
+
+static void mtk_disp_pwm_update_bits(struct mtk_disp_pwm *mdp, u32 offset,
+ u32 mask, u32 data)
+{
+ void __iomem *address = mdp->base + offset;
+ u32 value;
+
+ value = readl(address);
+ value &= ~mask;
+ value |= data;
+ writel(value, address);
+}
+
+static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
+ u32 clk_div, period, high_width, value;
+ u64 div, rate;
+ int err;
+
+ /*
+ * Find period, high_width and clk_div to suit duty_ns and period_ns.
+ * Calculate proper div value to keep period value in the bound.
+ *
+ * period_ns = 10^9 * (clk_div + 1) * (period + 1) / PWM_CLK_RATE
+ * duty_ns = 10^9 * (clk_div + 1) * high_width / PWM_CLK_RATE
+ *
+ * period = (PWM_CLK_RATE * period_ns) / (10^9 * (clk_div + 1)) - 1
+ * high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1))
+ */
+ rate = clk_get_rate(mdp->clk_main);
+ clk_div = div_u64(rate * period_ns, NSEC_PER_SEC) >>
+ PWM_PERIOD_BIT_WIDTH;
+ if (clk_div > PWM_CLKDIV_MAX)
+ return -EINVAL;
+
+ div = NSEC_PER_SEC * (clk_div + 1);
+ period = div64_u64(rate * period_ns, div);
+ if (period > 0)
+ period--;
+
+ high_width = div64_u64(rate * duty_ns, div);
+ value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
+
+ err = clk_enable(mdp->clk_main);
+ if (err < 0)
+ return err;
+
+ err = clk_enable(mdp->clk_mm);
+ if (err < 0) {
+ clk_disable(mdp->clk_main);
+ return err;
+ }
+
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_0, PWM_CLKDIV_MASK,
+ clk_div << PWM_CLKDIV_SHIFT);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_1,
+ PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK, value);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 1);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 0);
+
+ clk_disable(mdp->clk_mm);
+ clk_disable(mdp->clk_main);
+
+ return 0;
+}
+
+static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
+ int err;
+
+ err = clk_enable(mdp->clk_main);
+ if (err < 0)
+ return err;
+
+ err = clk_enable(mdp->clk_mm);
+ if (err < 0) {
+ clk_disable(mdp->clk_main);
+ return err;
+ }
+
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 1);
+
+ return 0;
+}
+
+static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
+
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 0);
+
+ clk_disable(mdp->clk_mm);
+ clk_disable(mdp->clk_main);
+}
+
+static const struct pwm_ops mtk_disp_pwm_ops = {
+ .config = mtk_disp_pwm_config,
+ .enable = mtk_disp_pwm_enable,
+ .disable = mtk_disp_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int mtk_disp_pwm_probe(struct platform_device *pdev)
+{
+ struct mtk_disp_pwm *mdp;
+ struct resource *r;
+ int ret;
+
+ mdp = devm_kzalloc(&pdev->dev, sizeof(*mdp), GFP_KERNEL);
+ if (!mdp)
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mdp->base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(mdp->base))
+ return PTR_ERR(mdp->base);
+
+ mdp->clk_main = devm_clk_get(&pdev->dev, "main");
+ if (IS_ERR(mdp->clk_main))
+ return PTR_ERR(mdp->clk_main);
+
+ mdp->clk_mm = devm_clk_get(&pdev->dev, "mm");
+ if (IS_ERR(mdp->clk_mm))
+ return PTR_ERR(mdp->clk_mm);
+
+ ret = clk_prepare(mdp->clk_main);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_prepare(mdp->clk_mm);
+ if (ret < 0)
+ goto disable_clk_main;
+
+ mdp->chip.dev = &pdev->dev;
+ mdp->chip.ops = &mtk_disp_pwm_ops;
+ mdp->chip.base = -1;
+ mdp->chip.npwm = 1;
+
+ ret = pwmchip_add(&mdp->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+ goto disable_clk_mm;
+ }
+
+ platform_set_drvdata(pdev, mdp);
+
+ return 0;
+
+disable_clk_mm:
+ clk_unprepare(mdp->clk_mm);
+disable_clk_main:
+ clk_unprepare(mdp->clk_main);
+ return ret;
+}
+
+static int mtk_disp_pwm_remove(struct platform_device *pdev)
+{
+ struct mtk_disp_pwm *mdp = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = pwmchip_remove(&mdp->chip);
+ clk_unprepare(mdp->clk_mm);
+ clk_unprepare(mdp->clk_main);
+
+ return ret;
+}
+
+static const struct of_device_id mtk_disp_pwm_of_match[] = {
+ { .compatible = "mediatek,mt8173-disp-pwm" },
+ { .compatible = "mediatek,mt6595-disp-pwm" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
+
+static struct platform_driver mtk_disp_pwm_driver = {
+ .driver = {
+ .name = "mediatek-disp-pwm",
+ .of_match_table = mtk_disp_pwm_of_match,
+ },
+ .probe = mtk_disp_pwm_probe,
+ .remove = mtk_disp_pwm_remove,
+};
+module_platform_driver(mtk_disp_pwm_driver);
+
+MODULE_AUTHOR("YH Huang <yh.huang@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek SoC display PWM driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * R-Car PWM Timer driver
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define RCAR_PWM_MAX_DIVISION 24
+#define RCAR_PWM_MAX_CYCLE 1023
+
+#define RCAR_PWMCR 0x00
+#define RCAR_PWMCR_CC0_MASK 0x000f0000
+#define RCAR_PWMCR_CC0_SHIFT 16
+#define RCAR_PWMCR_CCMD BIT(15)
+#define RCAR_PWMCR_SYNC BIT(11)
+#define RCAR_PWMCR_SS0 BIT(4)
+#define RCAR_PWMCR_EN0 BIT(0)
+
+#define RCAR_PWMCNT 0x04
+#define RCAR_PWMCNT_CYC0_MASK 0x03ff0000
+#define RCAR_PWMCNT_CYC0_SHIFT 16
+#define RCAR_PWMCNT_PH0_MASK 0x000003ff
+#define RCAR_PWMCNT_PH0_SHIFT 0
+
+struct rcar_pwm_chip {
+ struct pwm_chip chip;
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static inline struct rcar_pwm_chip *to_rcar_pwm_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct rcar_pwm_chip, chip);
+}
+
+static void rcar_pwm_write(struct rcar_pwm_chip *rp, u32 data,
+ unsigned int offset)
+{
+ writel(data, rp->base + offset);
+}
+
+static u32 rcar_pwm_read(struct rcar_pwm_chip *rp, unsigned int offset)
+{
+ return readl(rp->base + offset);
+}
+
+static void rcar_pwm_update(struct rcar_pwm_chip *rp, u32 mask, u32 data,
+ unsigned int offset)
+{
+ u32 value;
+
+ value = rcar_pwm_read(rp, offset);
+ value &= ~mask;
+ value |= data & mask;
+ rcar_pwm_write(rp, value, offset);
+}
+
+static int rcar_pwm_get_clock_division(struct rcar_pwm_chip *rp, int period_ns)
+{
+ unsigned long clk_rate = clk_get_rate(rp->clk);
+ unsigned long long max; /* max cycle / nanoseconds */
+ unsigned int div;
+
+ if (clk_rate == 0)
+ return -EINVAL;
+
+ for (div = 0; div <= RCAR_PWM_MAX_DIVISION; div++) {
+ max = (unsigned long long)NSEC_PER_SEC * RCAR_PWM_MAX_CYCLE *
+ (1 << div);
+ do_div(max, clk_rate);
+ if (period_ns < max)
+ break;
+ }
+
+ return (div <= RCAR_PWM_MAX_DIVISION) ? div : -ERANGE;
+}
+
+static void rcar_pwm_set_clock_control(struct rcar_pwm_chip *rp,
+ unsigned int div)
+{
+ u32 value;
+
+ value = rcar_pwm_read(rp, RCAR_PWMCR);
+ value &= ~(RCAR_PWMCR_CCMD | RCAR_PWMCR_CC0_MASK);
+
+ if (div & 1)
+ value |= RCAR_PWMCR_CCMD;
+
+ div >>= 1;
+
+ value |= div << RCAR_PWMCR_CC0_SHIFT;
+ rcar_pwm_write(rp, value, RCAR_PWMCR);
+}
+
+static int rcar_pwm_set_counter(struct rcar_pwm_chip *rp, int div, int duty_ns,
+ int period_ns)
+{
+ unsigned long long one_cycle, tmp; /* 0.01 nanoseconds */
+ unsigned long clk_rate = clk_get_rate(rp->clk);
+ u32 cyc, ph;
+
+ one_cycle = (unsigned long long)NSEC_PER_SEC * 100ULL * (1 << div);
+ do_div(one_cycle, clk_rate);
+
+ tmp = period_ns * 100ULL;
+ do_div(tmp, one_cycle);
+ cyc = (tmp << RCAR_PWMCNT_CYC0_SHIFT) & RCAR_PWMCNT_CYC0_MASK;
+
+ tmp = duty_ns * 100ULL;
+ do_div(tmp, one_cycle);
+ ph = tmp & RCAR_PWMCNT_PH0_MASK;
+
+ /* Avoid prohibited setting */
+ if (cyc == 0 || ph == 0)
+ return -EINVAL;
+
+ rcar_pwm_write(rp, cyc | ph, RCAR_PWMCNT);
+
+ return 0;
+}
+
+static int rcar_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct rcar_pwm_chip *rp = to_rcar_pwm_chip(chip);
+
+ return clk_prepare_enable(rp->clk);
+}
+
+static void rcar_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct rcar_pwm_chip *rp = to_rcar_pwm_chip(chip);
+
+ clk_disable_unprepare(rp->clk);
+}
+
+static int rcar_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct rcar_pwm_chip *rp = to_rcar_pwm_chip(chip);
+ int div, ret;
+
+ div = rcar_pwm_get_clock_division(rp, period_ns);
+ if (div < 0)
+ return div;
+
+ /* Let the core driver set pwm->period if disabled and duty_ns == 0 */
+ if (!test_bit(PWMF_ENABLED, &pwm->flags) && !duty_ns)
+ return 0;
+
+ rcar_pwm_update(rp, RCAR_PWMCR_SYNC, RCAR_PWMCR_SYNC, RCAR_PWMCR);
+
+ ret = rcar_pwm_set_counter(rp, div, duty_ns, period_ns);
+ if (!ret)
+ rcar_pwm_set_clock_control(rp, div);
+
+ /* The SYNC should be set to 0 even if rcar_pwm_set_counter failed */
+ rcar_pwm_update(rp, RCAR_PWMCR_SYNC, 0, RCAR_PWMCR);
+
+ return ret;
+}
+
+static int rcar_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct rcar_pwm_chip *rp = to_rcar_pwm_chip(chip);
+ u32 value;
+
+ /* Don't enable the PWM device if CYC0 or PH0 is 0 */
+ value = rcar_pwm_read(rp, RCAR_PWMCNT);
+ if ((value & RCAR_PWMCNT_CYC0_MASK) == 0 ||
+ (value & RCAR_PWMCNT_PH0_MASK) == 0)
+ return -EINVAL;
+
+ rcar_pwm_update(rp, RCAR_PWMCR_EN0, RCAR_PWMCR_EN0, RCAR_PWMCR);
+
+ return 0;
+}
+
+static void rcar_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct rcar_pwm_chip *rp = to_rcar_pwm_chip(chip);
+
+ rcar_pwm_update(rp, RCAR_PWMCR_EN0, 0, RCAR_PWMCR);
+}
+
+static const struct pwm_ops rcar_pwm_ops = {
+ .request = rcar_pwm_request,
+ .free = rcar_pwm_free,
+ .config = rcar_pwm_config,
+ .enable = rcar_pwm_enable,
+ .disable = rcar_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int rcar_pwm_probe(struct platform_device *pdev)
+{
+ struct rcar_pwm_chip *rcar_pwm;
+ struct resource *res;
+ int ret;
+
+ rcar_pwm = devm_kzalloc(&pdev->dev, sizeof(*rcar_pwm), GFP_KERNEL);
+ if (rcar_pwm == NULL)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rcar_pwm->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rcar_pwm->base))
+ return PTR_ERR(rcar_pwm->base);
+
+ rcar_pwm->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(rcar_pwm->clk)) {
+ dev_err(&pdev->dev, "cannot get clock\n");
+ return PTR_ERR(rcar_pwm->clk);
+ }
+
+ platform_set_drvdata(pdev, rcar_pwm);
+
+ rcar_pwm->chip.dev = &pdev->dev;
+ rcar_pwm->chip.ops = &rcar_pwm_ops;
+ rcar_pwm->chip.base = -1;
+ rcar_pwm->chip.npwm = 1;
+
+ ret = pwmchip_add(&rcar_pwm->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to register PWM chip: %d\n", ret);
+ return ret;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+}
+
+static int rcar_pwm_remove(struct platform_device *pdev)
+{
+ struct rcar_pwm_chip *rcar_pwm = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(&pdev->dev);
+
+ return pwmchip_remove(&rcar_pwm->chip);
+}
+
+static const struct of_device_id rcar_pwm_of_table[] = {
+ { .compatible = "renesas,pwm-rcar", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rcar_pwm_of_table);
+
+static struct platform_driver rcar_pwm_driver = {
+ .probe = rcar_pwm_probe,
+ .remove = rcar_pwm_remove,
+ .driver = {
+ .name = "pwm-rcar",
+ .of_match_table = of_match_ptr(rcar_pwm_of_table),
+ }
+};
+module_platform_driver(rcar_pwm_driver);
+
+MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");
+MODULE_DESCRIPTION("Renesas PWM Timer Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:pwm-rcar");
projects / karo-tx-linux.git / commitdiff