James Bottomley <jejb@titanic.il.steeleye.com>
James E Wilson <wilson@specifix.com>
James Ketrenos <jketreno@io.(none)>
+<javier@osg.samsung.com> <javier.martinez@collabora.co.uk>
Jean Tourrilhes <jt@hpl.hp.com>
Jeff Garzik <jgarzik@pretzel.yyz.us>
Jens Axboe <axboe@suse.de>
--- /dev/null
+This file contains documentation for running mainline
+kernel on omaps.
+
+KERNEL NEW DEPENDENCIES
+v4.3+ Update is needed for custom .config files to make sure
+ CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work
+ properly.
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-ARM/Allwinner A1X SoC support
+ARM/Allwinner sunXi SoC support
M: Maxime Ripard <maxime.ripard@free-electrons.com>
+M: Chen-Yu Tsai <wens@csie.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-N: sun[x4567]i
+N: sun[x456789]i
ARM/Allwinner SoC Clock Support
M: Emilio López <emilio@elopez.com.ar>
ZSMALLOC COMPRESSED SLAB MEMORY ALLOCATOR
M: Minchan Kim <minchan@kernel.org>
M: Nitin Gupta <ngupta@vflare.org>
+R: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
L: linux-mm@kvack.org
S: Maintained
F: mm/zsmalloc.c
VERSION = 4
PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
NAME = Blurry Fish Butt
# *DOCUMENTATION*
config ARCH_RPC
bool "RiscPC"
+ depends on MMU
select ARCH_ACORN
select ARCH_MAY_HAVE_PC_FDC
select ARCH_SPARSEMEM_ENABLE
/* SMPS9 unused */
ldo1_reg: ldo1 {
- /* VDD_SD */
+ /* VDD_SD / VDDSHV8 */
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
+ regulator-always-on;
};
ldo2_reg: ldo2 {
/ {
model = "Marvell Armada 385 Access Point Development Board";
- compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+ compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
chosen {
stdout-path = "serial1:115200n8";
};
usb_phy2: phy@a2f400 {
- compatible = "marvell,berlin2-usb-phy";
+ compatible = "marvell,berlin2cd-usb-phy";
reg = <0xa2f400 0x128>;
#phy-cells = <0>;
resets = <&chip_rst 0x104 14>;
};
usb_phy0: phy@b74000 {
- compatible = "marvell,berlin2-usb-phy";
+ compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb74000 0x128>;
#phy-cells = <0>;
resets = <&chip_rst 0x104 12>;
};
usb_phy1: phy@b78000 {
- compatible = "marvell,berlin2-usb-phy";
+ compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb78000 0x128>;
#phy-cells = <0>;
resets = <&chip_rst 0x104 13>;
};
};
+&pmu_system_controller {
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
};
};
+&pmu_system_controller {
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
status = "disabled";
};
- uart2: serial@30870000 {
+ uart2: serial@30890000 {
compatible = "fsl,imx7d-uart",
"fsl,imx6q-uart";
- reg = <0x30870000 0x10000>;
+ reg = <0x30890000 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_UART2_ROOT_CLK>,
<&clks IMX7D_UART2_ROOT_CLK>;
/ {
model = "LogicPD Zoom DM3730 Torpedo Development Kit";
- compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx";
+ compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
gpio_keys {
compatible = "gpio-keys";
timer@c1109940 {
compatible = "amlogic,meson6-timer";
- reg = <0xc1109940 0x14>;
+ reg = <0xc1109940 0x18>;
interrupts = <0 10 1>;
};
wdt: watchdog@c1109900 {
compatible = "amlogic,meson6-wdt";
reg = <0xc1109900 0x8>;
+ interrupts = <0 0 1>;
};
uart_AO: serial@c81004c0 {
compatible = "amlogic,meson-uart";
- reg = <0xc81004c0 0x14>;
+ reg = <0xc81004c0 0x18>;
interrupts = <0 90 1>;
clocks = <&clk81>;
status = "disabled";
};
- uart_A: serial@c81084c0 {
+ uart_A: serial@c11084c0 {
compatible = "amlogic,meson-uart";
- reg = <0xc81084c0 0x14>;
- interrupts = <0 90 1>;
+ reg = <0xc11084c0 0x18>;
+ interrupts = <0 26 1>;
clocks = <&clk81>;
status = "disabled";
};
- uart_B: serial@c81084dc {
+ uart_B: serial@c11084dc {
compatible = "amlogic,meson-uart";
- reg = <0xc81084dc 0x14>;
- interrupts = <0 90 1>;
+ reg = <0xc11084dc 0x18>;
+ interrupts = <0 75 1>;
clocks = <&clk81>;
status = "disabled";
};
- uart_C: serial@c8108700 {
+ uart_C: serial@c1108700 {
compatible = "amlogic,meson-uart";
- reg = <0xc8108700 0x14>;
- interrupts = <0 90 1>;
+ reg = <0xc1108700 0x18>;
+ interrupts = <0 93 1>;
clocks = <&clk81>;
status = "disabled";
};
/ {
model = "TI OMAP37XX EVM (TMDSEVM3730)";
- compatible = "ti,omap3-evm-37xx", "ti,omap36xx";
+ compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
memory {
device_type = "memory";
/* VMMCI level-shifter enable */
default_hrefv60_cfg2 {
pins = "GPIO169_D22";
- ste,config = <&gpio_out_lo>;
+ ste,config = <&gpio_out_hi>;
};
/* VMMCI level-shifter voltage select */
default_hrefv60_cfg3 {
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 246>;
+ */
};
apbmisc@70000800 {
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 251>;
+ */
};
apbdma: dma@0,60020000 {
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 224>;
+ */
};
apbmisc@70000800 {
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 248>;
+ */
};
apbmisc@70000800 {
};
ðsc {
- interrupts = <0 50 4>;
+ interrupts = <0 52 4>;
};
&serial0 {
depends on MMU && OF
select PREEMPT_NOTIFIERS
select ANON_INODES
+ select ARM_GIC
select HAVE_KVM_CPU_RELAX_INTERCEPT
select HAVE_KVM_ARCH_TLB_FLUSH_ALL
select KVM_MMIO
*/
err = kvm_timer_hyp_init();
if (err)
- goto out_free_mappings;
+ goto out_free_context;
#ifndef CONFIG_HOTPLUG_CPU
free_boot_hyp_pgd();
args.args_count = 0;
child_domain = of_genpd_get_from_provider(&args);
if (IS_ERR(child_domain))
- goto next_pd;
+ continue;
if (of_parse_phandle_with_args(np, "power-domains",
"#power-domain-cells", 0, &args) != 0)
- goto next_pd;
+ continue;
parent_domain = of_genpd_get_from_provider(&args);
if (IS_ERR(parent_domain))
- goto next_pd;
+ continue;
if (pm_genpd_add_subdomain(parent_domain, child_domain))
pr_warn("%s failed to add subdomain: %s\n",
else
pr_info("%s has as child subdomain: %s.\n",
parent_domain->name, child_domain->name);
-next_pd:
- of_node_put(np);
}
return 0;
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
+ select ZONE_DMA if ARM_LPAE
config SOC_AM33XX
bool "TI AM33XX"
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
+ select ZONE_DMA if ARM_LPAE
config ARCH_OMAP2PLUS
bool
MACHINE_END
static const char *const omap36xx_boards_compat[] __initconst = {
+ "ti,omap3630",
"ti,omap36xx",
NULL,
};
};
DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = SZ_2G,
+#endif
.reserve = omap_reserve,
.smp = smp_ops(omap4_smp_ops),
.map_io = omap5_map_io,
};
DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = SZ_2G,
+#endif
.reserve = omap_reserve,
.smp = smp_ops(omap4_smp_ops),
.map_io = dra7xx_map_io,
};
DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = SZ_2G,
+#endif
.reserve = omap_reserve,
.map_io = dra7xx_map_io,
.init_early = dra7xx_init_early,
void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
{
- omap_sdrc_init(NULL, NULL);
+ /*
+ * We still need this for omap2420 and omap3 PM to work, others are
+ * using drivers/misc/sram.c already.
+ */
+ if (of_machine_is_compatible("ti,omap2420") ||
+ of_machine_is_compatible("ti,omap3"))
+ omap_sdrc_init(NULL, NULL);
+
pdata_quirks_check(auxdata_quirks);
of_platform_populate(NULL, omap_dt_match_table,
omap_auxdata_lookup, NULL);
#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
-#ifdef CONFIG_PM
-
-#define ISRAM_START 0x5c000000
-#define ISRAM_SIZE SZ_256K
/*
* NAND NFC: DFI bus arbitration subset
#define NDCR_ND_ARB_EN (1 << 12)
#define NDCR_ND_ARB_CNTL (1 << 19)
+#ifdef CONFIG_PM
+
+#define ISRAM_START 0x5c000000
+#define ISRAM_SIZE SZ_256K
+
static void __iomem *sram;
static unsigned long wakeup_src;
d->netdev = &orion_ge00.dev;
for (i = 0; i < d->nr_chips; i++)
- d->chip[i].host_dev = &orion_ge00_shared.dev;
+ d->chip[i].host_dev = &orion_ge_mvmdio.dev;
orion_switch_device.dev.platform_data = d;
platform_device_register(&orion_switch_device);
* it does.
*/
-#include <byteswap.h>
#include <elf.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/types.h>
#include <unistd.h>
+#define swab16(x) \
+ ((((x) & 0x00ff) << 8) | \
+ (((x) & 0xff00) >> 8))
+
+#define swab32(x) \
+ ((((x) & 0x000000ff) << 24) | \
+ (((x) & 0x0000ff00) << 8) | \
+ (((x) & 0x00ff0000) >> 8) | \
+ (((x) & 0xff000000) << 24))
+
#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
#define HOST_ORDER ELFDATA2LSB
#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
static Elf32_Word read_elf_word(Elf32_Word word, bool swap)
{
- return swap ? bswap_32(word) : word;
+ return swap ? swab32(word) : word;
}
static Elf32_Half read_elf_half(Elf32_Half half, bool swap)
{
- return swap ? bswap_16(half) : half;
+ return swap ? swab16(half) : half;
}
static void write_elf_word(Elf32_Word val, Elf32_Word *dst, bool swap)
{
- *dst = swap ? bswap_32(val) : val;
+ *dst = swap ? swab32(val) : val;
}
int main(int argc, char **argv)
__asm__ __volatile__( \
ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, \
CONFIG_ARM64_PAN) \
- " mov %w2, %w1\n" \
- "0: ldxr"B" %w1, [%3]\n" \
- "1: stxr"B" %w0, %w2, [%3]\n" \
+ "0: ldxr"B" %w2, [%3]\n" \
+ "1: stxr"B" %w0, %w1, [%3]\n" \
" cbz %w0, 2f\n" \
" mov %w0, %w4\n" \
+ " b 3f\n" \
"2:\n" \
+ " mov %w1, %w2\n" \
+ "3:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
- "3: mov %w0, %w5\n" \
- " b 2b\n" \
+ "4: mov %w0, %w5\n" \
+ " b 3b\n" \
" .popsection" \
" .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
- " .quad 0b, 3b\n" \
- " .quad 1b, 3b\n" \
+ " .quad 0b, 4b\n" \
+ " .quad 1b, 4b\n" \
" .popsection\n" \
ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, \
CONFIG_ARM64_PAN) \
unsigned long kernel_size, kernel_memsize = 0;
unsigned long nr_pages;
void *old_image_addr = (void *)*image_addr;
+ unsigned long preferred_offset;
+
+ /*
+ * The preferred offset of the kernel Image is TEXT_OFFSET bytes beyond
+ * a 2 MB aligned base, which itself may be lower than dram_base, as
+ * long as the resulting offset equals or exceeds it.
+ */
+ preferred_offset = round_down(dram_base, SZ_2M) + TEXT_OFFSET;
+ if (preferred_offset < dram_base)
+ preferred_offset += SZ_2M;
/* Relocate the image, if required. */
kernel_size = _edata - _text;
- if (*image_addr != (dram_base + TEXT_OFFSET)) {
+ if (*image_addr != preferred_offset) {
kernel_memsize = kernel_size + (_end - _edata);
/*
* Mustang), we can still place the kernel at the address
* 'dram_base + TEXT_OFFSET'.
*/
- *image_addr = *reserve_addr = dram_base + TEXT_OFFSET;
+ *image_addr = *reserve_addr = preferred_offset;
nr_pages = round_up(kernel_memsize, EFI_ALLOC_ALIGN) /
EFI_PAGE_SIZE;
status = efi_call_early(allocate_pages, EFI_ALLOCATE_ADDRESS,
frame->sp = fp + 0x10;
frame->fp = *(unsigned long *)(fp);
- /*
- * -4 here because we care about the PC at time of bl,
- * not where the return will go.
- */
- frame->pc = *(unsigned long *)(fp + 8) - 4;
+ frame->pc = *(unsigned long *)(fp + 8);
return 0;
}
if (ret == 0) {
/*
* We are resuming from reset with TTBR0_EL1 set to the
- * idmap to enable the MMU; restore the active_mm mappings in
- * TTBR0_EL1 unless the active_mm == &init_mm, in which case
- * the thread entered cpu_suspend with TTBR0_EL1 set to
- * reserved TTBR0 page tables and should be restored as such.
+ * idmap to enable the MMU; set the TTBR0 to the reserved
+ * page tables to prevent speculative TLB allocations, flush
+ * the local tlb and set the default tcr_el1.t0sz so that
+ * the TTBR0 address space set-up is properly restored.
+ * If the current active_mm != &init_mm we entered cpu_suspend
+ * with mappings in TTBR0 that must be restored, so we switch
+ * them back to complete the address space configuration
+ * restoration before returning.
*/
- if (mm == &init_mm)
- cpu_set_reserved_ttbr0();
- else
- cpu_switch_mm(mm->pgd, mm);
-
+ cpu_set_reserved_ttbr0();
flush_tlb_all();
+ cpu_set_default_tcr_t0sz();
+
+ if (mm != &init_mm)
+ cpu_switch_mm(mm->pgd, mm);
/*
* Restore per-cpu offset before any kernel
-#define NR_syscalls 321 /* length of syscall table */
+#define NR_syscalls 322 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
#define __NR_execveat 1342
#define __NR_userfaultfd 1343
#define __NR_membarrier 1344
+#define __NR_kcmp 1345
#endif /* _UAPI_ASM_IA64_UNISTD_H */
data8 sys_execveat
data8 sys_userfaultfd
data8 sys_membarrier
+ data8 sys_kcmp // 1345
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
#ifdef __KERNEL__
-#include <asm/reg.h>
/* bytes per L1 cache line */
#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
};
extern struct ppc64_caches ppc64_caches;
-
-static inline void logmpp(u64 x)
-{
- asm volatile(PPC_LOGMPP(R1) : : "r" (x));
-}
-
#endif /* __powerpc64__ && ! __ASSEMBLY__ */
#if defined(__ASSEMBLY__)
u32 arch_compat;
ulong pcr;
ulong dpdes; /* doorbell state (POWER8) */
- void *mpp_buffer; /* Micro Partition Prefetch buffer */
- bool mpp_buffer_is_valid;
ulong conferring_threads;
};
#define PPC_INST_ISEL 0x7c00001e
#define PPC_INST_ISEL_MASK 0xfc00003e
#define PPC_INST_LDARX 0x7c0000a8
-#define PPC_INST_LOGMPP 0x7c0007e4
#define PPC_INST_LSWI 0x7c0004aa
#define PPC_INST_LSWX 0x7c00042a
#define PPC_INST_LWARX 0x7c000028
#define __PPC_EH(eh) 0
#endif
-/* POWER8 Micro Partition Prefetch (MPP) parameters */
-/* Address mask is common for LOGMPP instruction and MPPR SPR */
-#define PPC_MPPE_ADDRESS_MASK 0xffffffffc000ULL
-
-/* Bits 60 and 61 of MPP SPR should be set to one of the following */
-/* Aborting the fetch is indeed setting 00 in the table size bits */
-#define PPC_MPPR_FETCH_ABORT (0x0ULL << 60)
-#define PPC_MPPR_FETCH_WHOLE_TABLE (0x2ULL << 60)
-
-/* Bits 54 and 55 of register for LOGMPP instruction should be set to: */
-#define PPC_LOGMPP_LOG_L2 (0x02ULL << 54)
-#define PPC_LOGMPP_LOG_L2L3 (0x01ULL << 54)
-#define PPC_LOGMPP_LOG_ABORT (0x03ULL << 54)
-
/* Deal with instructions that older assemblers aren't aware of */
#define PPC_DCBAL(a, b) stringify_in_c(.long PPC_INST_DCBAL | \
__PPC_RA(a) | __PPC_RB(b))
#define PPC_LDARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LDARX | \
___PPC_RT(t) | ___PPC_RA(a) | \
___PPC_RB(b) | __PPC_EH(eh))
-#define PPC_LOGMPP(b) stringify_in_c(.long PPC_INST_LOGMPP | \
- __PPC_RB(b))
#define PPC_LWARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LWARX | \
___PPC_RT(t) | ___PPC_RA(a) | \
___PPC_RB(b) | __PPC_EH(eh))
#define CTRL_TE 0x00c00000 /* thread enable */
#define CTRL_RUNLATCH 0x1
#define SPRN_DAWR 0xB4
-#define SPRN_MPPR 0xB8 /* Micro Partition Prefetch Register */
#define SPRN_RPR 0xBA /* Relative Priority Register */
#define SPRN_CIABR 0xBB
#define CIABR_PRIV 0x3
dev->coherent_dma_mask = mask;
return 0;
}
-EXPORT_SYMBOL_GPL(dma_set_coherent_mask);
+EXPORT_SYMBOL(dma_set_coherent_mask);
#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ if (!rtas.entry)
+ return -EINVAL;
+
if (copy_from_user(&args, uargs, 3 * sizeof(u32)) != 0)
return -EFAULT;
#include <asm/reg.h>
#include <asm/cputable.h>
-#include <asm/cache.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/uaccess.h>
static DECLARE_BITMAP(default_enabled_hcalls, MAX_HCALL_OPCODE/4 + 1);
-#if defined(CONFIG_PPC_64K_PAGES)
-#define MPP_BUFFER_ORDER 0
-#elif defined(CONFIG_PPC_4K_PAGES)
-#define MPP_BUFFER_ORDER 3
-#endif
-
static int dynamic_mt_modes = 6;
module_param(dynamic_mt_modes, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(dynamic_mt_modes, "Set of allowed dynamic micro-threading modes: 0 (= none), 2, 4, or 6 (= 2 or 4)");
vcore->kvm = kvm;
INIT_LIST_HEAD(&vcore->preempt_list);
- vcore->mpp_buffer_is_valid = false;
-
- if (cpu_has_feature(CPU_FTR_ARCH_207S))
- vcore->mpp_buffer = (void *)__get_free_pages(
- GFP_KERNEL|__GFP_ZERO,
- MPP_BUFFER_ORDER);
-
return vcore;
}
return 1;
}
-static void kvmppc_start_saving_l2_cache(struct kvmppc_vcore *vc)
-{
- phys_addr_t phy_addr, mpp_addr;
-
- phy_addr = (phys_addr_t)virt_to_phys(vc->mpp_buffer);
- mpp_addr = phy_addr & PPC_MPPE_ADDRESS_MASK;
-
- mtspr(SPRN_MPPR, mpp_addr | PPC_MPPR_FETCH_ABORT);
- logmpp(mpp_addr | PPC_LOGMPP_LOG_L2);
-
- vc->mpp_buffer_is_valid = true;
-}
-
-static void kvmppc_start_restoring_l2_cache(const struct kvmppc_vcore *vc)
-{
- phys_addr_t phy_addr, mpp_addr;
-
- phy_addr = virt_to_phys(vc->mpp_buffer);
- mpp_addr = phy_addr & PPC_MPPE_ADDRESS_MASK;
-
- /* We must abort any in-progress save operations to ensure
- * the table is valid so that prefetch engine knows when to
- * stop prefetching. */
- logmpp(mpp_addr | PPC_LOGMPP_LOG_ABORT);
- mtspr(SPRN_MPPR, mpp_addr | PPC_MPPR_FETCH_WHOLE_TABLE);
-}
-
/*
* A list of virtual cores for each physical CPU.
* These are vcores that could run but their runner VCPU tasks are
srcu_idx = srcu_read_lock(&vc->kvm->srcu);
- if (vc->mpp_buffer_is_valid)
- kvmppc_start_restoring_l2_cache(vc);
-
__kvmppc_vcore_entry();
- if (vc->mpp_buffer)
- kvmppc_start_saving_l2_cache(vc);
-
srcu_read_unlock(&vc->kvm->srcu, srcu_idx);
spin_lock(&vc->lock);
{
long int i;
- for (i = 0; i < KVM_MAX_VCORES; ++i) {
- if (kvm->arch.vcores[i] && kvm->arch.vcores[i]->mpp_buffer) {
- struct kvmppc_vcore *vc = kvm->arch.vcores[i];
- free_pages((unsigned long)vc->mpp_buffer,
- MPP_BUFFER_ORDER);
- }
+ for (i = 0; i < KVM_MAX_VCORES; ++i)
kfree(kvm->arch.vcores[i]);
- }
kvm->arch.online_vcores = 0;
}
* so clear LPCR:PECE1. We keep PECE2 enabled.
*/
mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
+
+ /*
+ * Hard-disable interrupts, and then clear irq_happened flags
+ * that we can safely ignore while off-line, since they
+ * are for things for which we do no processing when off-line
+ * (or in the case of HMI, all the processing we need to do
+ * is done in lower-level real-mode code).
+ */
+ hard_irq_disable();
+ local_paca->irq_happened &= ~(PACA_IRQ_DEC | PACA_IRQ_HMI);
+
while (!generic_check_cpu_restart(cpu)) {
+ /*
+ * Clear IPI flag, since we don't handle IPIs while
+ * offline, except for those when changing micro-threading
+ * mode, which are handled explicitly below, and those
+ * for coming online, which are handled via
+ * generic_check_cpu_restart() calls.
+ */
+ kvmppc_set_host_ipi(cpu, 0);
ppc64_runlatch_off();
* having finished executing in a KVM guest, then srr1
* contains 0.
*/
- if ((srr1 & wmask) == SRR1_WAKEEE) {
+ if (((srr1 & wmask) == SRR1_WAKEEE) ||
+ (local_paca->irq_happened & PACA_IRQ_EE)) {
icp_native_flush_interrupt();
- local_paca->irq_happened &= PACA_IRQ_HARD_DIS;
- smp_mb();
} else if ((srr1 & wmask) == SRR1_WAKEHDBELL) {
unsigned long msg = PPC_DBELL_TYPE(PPC_DBELL_SERVER);
asm volatile(PPC_MSGCLR(%0) : : "r" (msg));
- kvmppc_set_host_ipi(cpu, 0);
}
+ local_paca->irq_happened &= ~(PACA_IRQ_EE | PACA_IRQ_DBELL);
+ smp_mb();
if (cpu_core_split_required())
continue;
- if (!generic_check_cpu_restart(cpu))
+ if (srr1 && !generic_check_cpu_restart(cpu))
DBG("CPU%d Unexpected exit while offline !\n", cpu);
}
mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1);
USER_CFLAGS = $(patsubst $(KERNEL_DEFINES),,$(patsubst -I%,,$(KBUILD_CFLAGS))) \
$(ARCH_INCLUDE) $(MODE_INCLUDE) $(filter -I%,$(CFLAGS)) \
- -D_FILE_OFFSET_BITS=64 -idirafter include \
- -D__KERNEL__ -D__UM_HOST__
+ -D_FILE_OFFSET_BITS=64 -idirafter $(srctree)/include \
+ -idirafter $(obj)/include -D__KERNEL__ -D__UM_HOST__
#This will adjust *FLAGS accordingly to the platform.
include $(ARCH_DIR)/Makefile-os-$(OS)
show_regs(container_of(regs, struct pt_regs, regs));
panic("Segfault with no mm");
}
- else if (!is_user && address < TASK_SIZE) {
+ else if (!is_user && address > PAGE_SIZE && address < TASK_SIZE) {
show_regs(container_of(regs, struct pt_regs, regs));
panic("Kernel tried to access user memory at addr 0x%lx, ip 0x%lx",
address, ip);
"ret = %d\n", -n);
ret = n;
}
- CATCH_EINTR(waitpid(pid, NULL, __WCLONE));
+ CATCH_EINTR(waitpid(pid, NULL, __WALL));
}
out_free2:
return err;
}
if (stack_out == NULL) {
- CATCH_EINTR(pid = waitpid(pid, &status, __WCLONE));
+ CATCH_EINTR(pid = waitpid(pid, &status, __WALL));
if (pid < 0) {
err = -errno;
printk(UM_KERN_ERR "run_helper_thread - wait failed, "
int helper_wait(int pid)
{
int ret, status;
- int wflags = __WCLONE;
+ int wflags = __WALL;
CATCH_EINTR(ret = waitpid(pid, &status, wflags));
if (ret < 0) {
bool conout_found = false;
void *dummy = NULL;
u32 h = handles[i];
+ u32 current_fb_base;
status = efi_call_early(handle_protocol, h,
proto, (void **)&gop32);
if (status == EFI_SUCCESS)
conout_found = true;
- status = __gop_query32(gop32, &info, &size, &fb_base);
+ status = __gop_query32(gop32, &info, &size, ¤t_fb_base);
if (status == EFI_SUCCESS && (!first_gop || conout_found)) {
/*
* Systems that use the UEFI Console Splitter may
pixel_format = info->pixel_format;
pixel_info = info->pixel_information;
pixels_per_scan_line = info->pixels_per_scan_line;
+ fb_base = current_fb_base;
/*
* Once we've found a GOP supporting ConOut,
bool conout_found = false;
void *dummy = NULL;
u64 h = handles[i];
+ u32 current_fb_base;
status = efi_call_early(handle_protocol, h,
proto, (void **)&gop64);
if (status == EFI_SUCCESS)
conout_found = true;
- status = __gop_query64(gop64, &info, &size, &fb_base);
+ status = __gop_query64(gop64, &info, &size, ¤t_fb_base);
if (status == EFI_SUCCESS && (!first_gop || conout_found)) {
/*
* Systems that use the UEFI Console Splitter may
pixel_format = info->pixel_format;
pixel_info = info->pixel_information;
pixels_per_scan_line = info->pixels_per_scan_line;
+ fb_base = current_fb_base;
/*
* Once we've found a GOP supporting ConOut,
function. */
#define __HAVE_ARCH_MEMCPY 1
+extern void *memcpy(void *to, const void *from, size_t len);
extern void *__memcpy(void *to, const void *from, size_t len);
#ifndef CONFIG_KMEMCHECK
-#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
-extern void *memcpy(void *to, const void *from, size_t len);
-#else
+#if (__GNUC__ == 4 && __GNUC_MINOR__ < 3) || __GNUC__ < 4
#define memcpy(dst, src, len) \
({ \
size_t __len = (len); \
struct irq_data *irq_data;
struct mp_chip_data *data;
struct irq_alloc_info *info = arg;
+ unsigned long flags;
if (!info || nr_irqs > 1)
return -EINVAL;
cfg = irqd_cfg(irq_data);
add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin);
+
+ local_irq_save(flags);
if (info->ioapic_entry)
mp_setup_entry(cfg, data, info->ioapic_entry);
mp_register_handler(virq, data->trigger);
if (virq < nr_legacy_irqs())
legacy_pic->mask(virq);
+ local_irq_restore(flags);
apic_printk(APIC_VERBOSE, KERN_DEBUG
"IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i Dest:%d)\n",
if (sp < bottom || sp > top)
return 0;
- fp = READ_ONCE(*(unsigned long *)sp);
+ fp = READ_ONCE_NOCHECK(*(unsigned long *)sp);
do {
if (fp < bottom || fp > top)
return 0;
- ip = READ_ONCE(*(unsigned long *)(fp + sizeof(unsigned long)));
+ ip = READ_ONCE_NOCHECK(*(unsigned long *)(fp + sizeof(unsigned long)));
if (!in_sched_functions(ip))
return ip;
- fp = READ_ONCE(*(unsigned long *)fp);
+ fp = READ_ONCE_NOCHECK(*(unsigned long *)fp);
} while (count++ < 16 && p->state != TASK_RUNNING);
return 0;
}
clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY,
swapper_pg_dir + KERNEL_PGD_BOUNDARY,
KERNEL_PGD_PTRS);
+
+ /*
+ * sync back low identity map too. It is used for example
+ * in the 32-bit EFI stub.
+ */
+ clone_pgd_range(initial_page_table,
+ swapper_pg_dir + KERNEL_PGD_BOUNDARY,
+ KERNEL_PGD_PTRS);
#endif
tboot_probe();
*/
#define UDELAY_10MS_DEFAULT 10000
-static unsigned int init_udelay = UDELAY_10MS_DEFAULT;
+static unsigned int init_udelay = INT_MAX;
static int __init cpu_init_udelay(char *str)
{
static void __init smp_quirk_init_udelay(void)
{
/* if cmdline changed it from default, leave it alone */
- if (init_udelay != UDELAY_10MS_DEFAULT)
+ if (init_udelay != INT_MAX)
return;
/* if modern processor, use no delay */
if (((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 6)) ||
((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && (boot_cpu_data.x86 >= 0xF)))
init_udelay = 0;
+
+ /* else, use legacy delay */
+ init_udelay = UDELAY_10MS_DEFAULT;
}
/*
/*
* Give the other CPU some time to accept the IPI.
*/
- if (init_udelay)
+ if (init_udelay == 0)
+ udelay(10);
+ else
udelay(300);
pr_debug("Startup point 1\n");
/*
* Give the other CPU some time to accept the IPI.
*/
- if (init_udelay)
+ if (init_udelay == 0)
+ udelay(10);
+ else
udelay(200);
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
#include <skas.h>
#include <sysdep/tls.h>
-extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
+static inline int modify_ldt (int func, void *ptr, unsigned long bytecount)
+{
+ return syscall(__NR_modify_ldt, func, ptr, bytecount);
+}
static long write_ldt_entry(struct mm_id *mm_idp, int func,
struct user_desc *desc, void **addr, int done)
q->queue_lock = &q->__queue_lock;
spin_unlock_irq(lock);
- bdi_destroy(&q->backing_dev_info);
+ bdi_unregister(&q->backing_dev_info);
/* @q is and will stay empty, shutdown and put */
blk_put_queue(q);
bio_put(bio);
}
-/*
- * Ensure that max discard sectors doesn't overflow bi_size and hopefully
- * it is of the proper granularity as long as the granularity is a power
- * of two.
- */
-#define MAX_BIO_SECTORS ((1U << 31) >> 9)
-
/**
* blkdev_issue_discard - queue a discard
* @bdev: blockdev to issue discard for
DECLARE_COMPLETION_ONSTACK(wait);
struct request_queue *q = bdev_get_queue(bdev);
int type = REQ_WRITE | REQ_DISCARD;
+ unsigned int granularity;
+ int alignment;
struct bio_batch bb;
struct bio *bio;
int ret = 0;
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
+ /* Zero-sector (unknown) and one-sector granularities are the same. */
+ granularity = max(q->limits.discard_granularity >> 9, 1U);
+ alignment = (bdev_discard_alignment(bdev) >> 9) % granularity;
+
if (flags & BLKDEV_DISCARD_SECURE) {
if (!blk_queue_secdiscard(q))
return -EOPNOTSUPP;
blk_start_plug(&plug);
while (nr_sects) {
unsigned int req_sects;
- sector_t end_sect;
+ sector_t end_sect, tmp;
bio = bio_alloc(gfp_mask, 1);
if (!bio) {
break;
}
- req_sects = min_t(sector_t, nr_sects, MAX_BIO_SECTORS);
+ /* Make sure bi_size doesn't overflow */
+ req_sects = min_t(sector_t, nr_sects, UINT_MAX >> 9);
+
+ /*
+ * If splitting a request, and the next starting sector would be
+ * misaligned, stop the discard at the previous aligned sector.
+ */
end_sect = sector + req_sects;
+ tmp = end_sect;
+ if (req_sects < nr_sects &&
+ sector_div(tmp, granularity) != alignment) {
+ end_sect = end_sect - alignment;
+ sector_div(end_sect, granularity);
+ end_sect = end_sect * granularity + alignment;
+ req_sects = end_sect - sector;
+ }
bio->bi_iter.bi_sector = sector;
bio->bi_end_io = bio_batch_end_io;
{
bt_free(&tags->bitmap_tags);
bt_free(&tags->breserved_tags);
+ free_cpumask_var(tags->cpumask);
kfree(tags);
}
int i;
for (i = 0; i < set->nr_hw_queues; i++) {
- if (set->tags[i]) {
+ if (set->tags[i])
blk_mq_free_rq_map(set, set->tags[i], i);
- free_cpumask_var(set->tags[i]->cpumask);
- }
}
kfree(set->tags);
struct request_queue *q =
container_of(kobj, struct request_queue, kobj);
+ bdi_exit(&q->backing_dev_info);
blkcg_exit_queue(q);
if (q->elevator) {
err:
if (err != -EAGAIN)
break;
- if (signal_pending(current)) {
+ if (fatal_signal_pending(current)) {
err = -EINTR;
break;
}
crypto_alg_tested(larval->alg.cra_driver_name, 0);
}
- err = wait_for_completion_interruptible(&larval->completion);
+ err = wait_for_completion_killable(&larval->completion);
WARN_ON(err);
out:
struct crypto_larval *larval = (void *)alg;
long timeout;
- timeout = wait_for_completion_interruptible_timeout(
+ timeout = wait_for_completion_killable_timeout(
&larval->completion, 60 * HZ);
alg = larval->adult;
err:
if (err != -EAGAIN)
break;
- if (signal_pending(current)) {
+ if (fatal_signal_pending(current)) {
err = -EINTR;
break;
}
err:
if (err != -EAGAIN)
break;
- if (signal_pending(current)) {
+ if (fatal_signal_pending(current)) {
err = -EINTR;
break;
}
err = PTR_ERR(alg);
if (err != -EAGAIN)
break;
- if (signal_pending(current)) {
+ if (fatal_signal_pending(current)) {
err = -EINTR;
break;
}
* global one. Requires architecture specific dev_get_cma_area() helper
* function.
*/
-struct page *dma_alloc_from_contiguous(struct device *dev, int count,
+struct page *dma_alloc_from_contiguous(struct device *dev, size_t count,
unsigned int align)
{
if (align > CONFIG_CMA_ALIGNMENT)
bool disconnect; /* a disconnect has been requested by user */
struct timer_list timeout_timer;
+ spinlock_t tasks_lock;
struct task_struct *task_recv;
struct task_struct *task_send;
static void nbd_xmit_timeout(unsigned long arg)
{
struct nbd_device *nbd = (struct nbd_device *)arg;
- struct task_struct *task;
+ unsigned long flags;
if (list_empty(&nbd->queue_head))
return;
nbd->disconnect = true;
- task = READ_ONCE(nbd->task_recv);
- if (task)
- force_sig(SIGKILL, task);
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
+
+ if (nbd->task_recv)
+ force_sig(SIGKILL, nbd->task_recv);
- task = READ_ONCE(nbd->task_send);
- if (task)
+ if (nbd->task_send)
force_sig(SIGKILL, nbd->task_send);
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
+
dev_err(nbd_to_dev(nbd), "Connection timed out, killed receiver and sender, shutting down connection\n");
}
{
struct request *req;
int ret;
+ unsigned long flags;
BUG_ON(nbd->magic != NBD_MAGIC);
sk_set_memalloc(nbd->sock->sk);
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_recv = current;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
ret = device_create_file(disk_to_dev(nbd->disk), &pid_attr);
if (ret) {
dev_err(disk_to_dev(nbd->disk), "device_create_file failed!\n");
+
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_recv = NULL;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
+
return ret;
}
device_remove_file(disk_to_dev(nbd->disk), &pid_attr);
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_recv = NULL;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
if (signal_pending(current)) {
siginfo_t info;
{
struct nbd_device *nbd = data;
struct request *req;
+ unsigned long flags;
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_send = current;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
set_user_nice(current, MIN_NICE);
while (!kthread_should_stop() || !list_empty(&nbd->waiting_queue)) {
nbd_handle_req(nbd, req);
}
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_send = NULL;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
+
+ /* Clear maybe pending signals */
+ if (signal_pending(current)) {
+ siginfo_t info;
+ dequeue_signal_lock(current, ¤t->blocked, &info);
+ }
return 0;
}
nbd_dev[i].magic = NBD_MAGIC;
INIT_LIST_HEAD(&nbd_dev[i].waiting_queue);
spin_lock_init(&nbd_dev[i].queue_lock);
+ spin_lock_init(&nbd_dev[i].tasks_lock);
INIT_LIST_HEAD(&nbd_dev[i].queue_head);
mutex_init(&nbd_dev[i].tx_lock);
init_timer(&nbd_dev[i].timeout_timer);
struct nvme_iod *iod = ctx;
struct request *req = iod_get_private(iod);
struct nvme_cmd_info *cmd_rq = blk_mq_rq_to_pdu(req);
-
u16 status = le16_to_cpup(&cqe->status) >> 1;
+ bool requeue = false;
+ int error = 0;
if (unlikely(status)) {
if (!(status & NVME_SC_DNR || blk_noretry_request(req))
&& (jiffies - req->start_time) < req->timeout) {
unsigned long flags;
+ requeue = true;
blk_mq_requeue_request(req);
spin_lock_irqsave(req->q->queue_lock, flags);
if (!blk_queue_stopped(req->q))
blk_mq_kick_requeue_list(req->q);
spin_unlock_irqrestore(req->q->queue_lock, flags);
- return;
+ goto release_iod;
}
if (req->cmd_type == REQ_TYPE_DRV_PRIV) {
if (cmd_rq->ctx == CMD_CTX_CANCELLED)
- status = -EINTR;
+ error = -EINTR;
+ else
+ error = status;
} else {
- status = nvme_error_status(status);
+ error = nvme_error_status(status);
}
}
if (cmd_rq->aborted)
dev_warn(nvmeq->dev->dev,
"completing aborted command with status:%04x\n",
- status);
+ error);
+release_iod:
if (iod->nents) {
dma_unmap_sg(nvmeq->dev->dev, iod->sg, iod->nents,
rq_data_dir(req) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
}
nvme_free_iod(nvmeq->dev, iod);
- blk_mq_complete_request(req, status);
+ if (likely(!requeue))
+ blk_mq_complete_request(req, error);
}
/* length is in bytes. gfp flags indicates whether we may sleep. */
length = (io.nblocks + 1) << ns->lba_shift;
meta_len = (io.nblocks + 1) * ns->ms;
- metadata = (void __user *)(unsigned long)io.metadata;
+ metadata = (void __user *)(uintptr_t)io.metadata;
write = io.opcode & 1;
if (ns->ext) {
c.rw.metadata = cpu_to_le64(meta_dma);
status = __nvme_submit_sync_cmd(ns->queue, &c, NULL,
- (void __user *)io.addr, length, NULL, 0);
+ (void __user *)(uintptr_t)io.addr, length, NULL, 0);
unmap:
if (meta) {
if (status == NVME_SC_SUCCESS && !write) {
timeout = msecs_to_jiffies(cmd.timeout_ms);
status = __nvme_submit_sync_cmd(ns ? ns->queue : dev->admin_q, &c,
- NULL, (void __user *)cmd.addr, cmd.data_len,
+ NULL, (void __user *)(uintptr_t)cmd.addr, cmd.data_len,
&cmd.result, timeout);
if (status >= 0) {
if (put_user(cmd.result, &ucmd->result))
#define RBD_MINORS_PER_MAJOR 256
#define RBD_SINGLE_MAJOR_PART_SHIFT 4
+#define RBD_MAX_PARENT_CHAIN_LEN 16
+
#define RBD_SNAP_DEV_NAME_PREFIX "snap_"
#define RBD_MAX_SNAP_NAME_LEN \
(NAME_MAX - (sizeof (RBD_SNAP_DEV_NAME_PREFIX) - 1))
size_t count);
static ssize_t rbd_remove_single_major(struct bus_type *bus, const char *buf,
size_t count);
-static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping);
+static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth);
static void rbd_spec_put(struct rbd_spec *spec);
static int rbd_dev_id_to_minor(int dev_id)
return ret;
}
-static int rbd_dev_probe_parent(struct rbd_device *rbd_dev)
+/*
+ * @depth is rbd_dev_image_probe() -> rbd_dev_probe_parent() ->
+ * rbd_dev_image_probe() recursion depth, which means it's also the
+ * length of the already discovered part of the parent chain.
+ */
+static int rbd_dev_probe_parent(struct rbd_device *rbd_dev, int depth)
{
struct rbd_device *parent = NULL;
- struct rbd_spec *parent_spec;
- struct rbd_client *rbdc;
int ret;
if (!rbd_dev->parent_spec)
return 0;
- /*
- * We need to pass a reference to the client and the parent
- * spec when creating the parent rbd_dev. Images related by
- * parent/child relationships always share both.
- */
- parent_spec = rbd_spec_get(rbd_dev->parent_spec);
- rbdc = __rbd_get_client(rbd_dev->rbd_client);
- ret = -ENOMEM;
- parent = rbd_dev_create(rbdc, parent_spec, NULL);
- if (!parent)
+ if (++depth > RBD_MAX_PARENT_CHAIN_LEN) {
+ pr_info("parent chain is too long (%d)\n", depth);
+ ret = -EINVAL;
+ goto out_err;
+ }
+
+ parent = rbd_dev_create(rbd_dev->rbd_client, rbd_dev->parent_spec,
+ NULL);
+ if (!parent) {
+ ret = -ENOMEM;
goto out_err;
+ }
+
+ /*
+ * Images related by parent/child relationships always share
+ * rbd_client and spec/parent_spec, so bump their refcounts.
+ */
+ __rbd_get_client(rbd_dev->rbd_client);
+ rbd_spec_get(rbd_dev->parent_spec);
- ret = rbd_dev_image_probe(parent, false);
+ ret = rbd_dev_image_probe(parent, depth);
if (ret < 0)
goto out_err;
+
rbd_dev->parent = parent;
atomic_set(&rbd_dev->parent_ref, 1);
-
return 0;
+
out_err:
- if (parent) {
- rbd_dev_unparent(rbd_dev);
+ rbd_dev_unparent(rbd_dev);
+ if (parent)
rbd_dev_destroy(parent);
- } else {
- rbd_put_client(rbdc);
- rbd_spec_put(parent_spec);
- }
-
return ret;
}
* parent), initiate a watch on its header object before using that
* object to get detailed information about the rbd image.
*/
-static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping)
+static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
{
int ret;
if (ret)
goto err_out_format;
- if (mapping) {
+ if (!depth) {
ret = rbd_dev_header_watch_sync(rbd_dev);
if (ret) {
if (ret == -ENOENT)
* Otherwise this is a parent image, identified by pool, image
* and snap ids - need to fill in names for those ids.
*/
- if (mapping)
+ if (!depth)
ret = rbd_spec_fill_snap_id(rbd_dev);
else
ret = rbd_spec_fill_names(rbd_dev);
* Need to warn users if this image is the one being
* mapped and has a parent.
*/
- if (mapping && rbd_dev->parent_spec)
+ if (!depth && rbd_dev->parent_spec)
rbd_warn(rbd_dev,
"WARNING: kernel layering is EXPERIMENTAL!");
}
- ret = rbd_dev_probe_parent(rbd_dev);
+ ret = rbd_dev_probe_parent(rbd_dev, depth);
if (ret)
goto err_out_probe;
err_out_probe:
rbd_dev_unprobe(rbd_dev);
err_out_watch:
- if (mapping)
+ if (!depth)
rbd_dev_header_unwatch_sync(rbd_dev);
out_header_name:
kfree(rbd_dev->header_name);
spec = NULL; /* rbd_dev now owns this */
rbd_opts = NULL; /* rbd_dev now owns this */
- rc = rbd_dev_image_probe(rbd_dev, true);
+ rc = rbd_dev_image_probe(rbd_dev, 0);
if (rc < 0)
goto err_out_rbd_dev;
break;
/* Missed the backend's Closing state -- fallthrough */
case XenbusStateClosing:
- blkfront_closing(info);
+ if (info)
+ blkfront_closing(info);
break;
}
}
if (!cpumask_test_and_clear_cpu(cpu, &dt->cpu))
break;
target = cpumask_any_but(cpu_online_mask, cpu);
- if (target < 0)
+ if (target >= nr_cpu_ids)
break;
perf_pmu_migrate_context(&dt->pmu, cpu, target);
cpumask_set_cpu(target, &dt->cpu);
- WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
+ if (ccn->irq)
+ WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
default:
break;
}
if (IS_ERR(r))
return PTR_ERR(r);
- l = clkdev_create(r, alias, "%s", alias_dev_name);
+ l = clkdev_create(r, alias, alias_dev_name ? "%s" : NULL,
+ alias_dev_name);
clk_put(r);
return l ? 0 : -ENODEV;
u8 fan_max_rpm;
/* dpm */
bool dpm_enabled;
+ bool sysfs_initialized;
struct amdgpu_dpm dpm;
const struct firmware *fw; /* SMC firmware */
uint32_t fw_version;
goto cleanup;
}
- fence_get(work->excl);
- for (i = 0; i < work->shared_count; ++i)
- fence_get(work->shared[i]);
-
amdgpu_bo_get_tiling_flags(new_rbo, &tiling_flags);
amdgpu_bo_unreserve(new_rbo);
struct amdgpu_device *adev = dev_get_drvdata(dev);
umode_t effective_mode = attr->mode;
- /* Skip limit attributes if DPM is not enabled */
+ /* Skip attributes if DPM is not enabled */
if (!adev->pm.dpm_enabled &&
(attr == &sensor_dev_attr_temp1_crit.dev_attr.attr ||
- attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr))
+ attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_enable.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_max.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_min.dev_attr.attr))
return 0;
/* Skip fan attributes if fan is not present */
{
int ret;
+ if (adev->pm.sysfs_initialized)
+ return 0;
+
if (adev->pm.funcs->get_temperature == NULL)
return 0;
adev->pm.int_hwmon_dev = hwmon_device_register_with_groups(adev->dev,
return ret;
}
+ adev->pm.sysfs_initialized = true;
+
return 0;
}
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
int ret;
+ if (!amdgpu_dpm)
+ return 0;
+
/* init the sysfs and debugfs files late */
ret = amdgpu_pm_sysfs_init(adev);
if (ret)
list_for_each_entry(port, &mstb->ports, next) {
if (port->port_num == port_num) {
- if (!port->mstb) {
+ mstb = port->mstb;
+ if (!mstb) {
DRM_ERROR("failed to lookup MSTB with lct %d, rad %02x\n", lct, rad[0]);
- return NULL;
+ goto out;
}
- mstb = port->mstb;
break;
}
}
}
kref_get(&mstb->kref);
+out:
mutex_unlock(&mgr->lock);
return mstb;
}
}
/**
- * i915_gem_shrink - Shrink buffer object caches completely
+ * i915_gem_shrink_all - Shrink buffer object caches completely
* @dev_priv: i915 device
*
* This is a simple wraper around i915_gem_shrink() to aggressively shrink all
* Also note, that the object created here is not currently a "first class"
* object, in that several ioctls are banned. These are the CPU access
* ioctls: mmap(), pwrite and pread. In practice, you are expected to use
- * direct access via your pointer rather than use those ioctls.
+ * direct access via your pointer rather than use those ioctls. Another
+ * restriction is that we do not allow userptr surfaces to be pinned to the
+ * hardware and so we reject any attempt to create a framebuffer out of a
+ * userptr.
*
* If you think this is a good interface to use to pass GPU memory between
* drivers, please use dma-buf instead. In fact, wherever possible use
I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
}
+ /*
+ * Apparently we need to have VGA mode enabled prior to changing
+ * the P1/P2 dividers. Otherwise the DPLL will keep using the old
+ * dividers, even though the register value does change.
+ */
+ I915_WRITE(reg, 0);
+
+ I915_WRITE(reg, dpll);
+
/* Wait for the clocks to stabilize. */
POSTING_READ(reg);
udelay(150);
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
struct drm_i915_gem_object *obj = intel_fb->obj;
+ if (obj->userptr.mm) {
+ DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n");
+ return -EINVAL;
+ }
+
return drm_gem_handle_create(file, &obj->base, handle);
}
/* restore vblank interrupts to correct state */
drm_crtc_vblank_reset(&crtc->base);
if (crtc->active) {
+ struct intel_plane *plane;
+
drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
update_scanline_offset(crtc);
drm_crtc_vblank_on(&crtc->base);
+
+ /* Disable everything but the primary plane */
+ for_each_intel_plane_on_crtc(dev, crtc, plane) {
+ if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
+ continue;
+
+ plane->disable_plane(&plane->base, &crtc->base);
+ }
}
/* We need to sanitize the plane -> pipe mapping first because this will
i915_redisable_vga_power_on(dev);
}
-static bool primary_get_hw_state(struct intel_crtc *crtc)
+static bool primary_get_hw_state(struct intel_plane *plane)
{
- struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
+ struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
- return !!(I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE);
+ return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE;
}
-static void readout_plane_state(struct intel_crtc *crtc,
- struct intel_crtc_state *crtc_state)
+/* FIXME read out full plane state for all planes */
+static void readout_plane_state(struct intel_crtc *crtc)
{
- struct intel_plane *p;
- struct intel_plane_state *plane_state;
- bool active = crtc_state->base.active;
-
- for_each_intel_plane(crtc->base.dev, p) {
- if (crtc->pipe != p->pipe)
- continue;
-
- plane_state = to_intel_plane_state(p->base.state);
+ struct drm_plane *primary = crtc->base.primary;
+ struct intel_plane_state *plane_state =
+ to_intel_plane_state(primary->state);
- if (p->base.type == DRM_PLANE_TYPE_PRIMARY) {
- plane_state->visible = primary_get_hw_state(crtc);
- if (plane_state->visible)
- crtc->base.state->plane_mask |=
- 1 << drm_plane_index(&p->base);
- } else {
- if (active)
- p->disable_plane(&p->base, &crtc->base);
+ plane_state->visible =
+ primary_get_hw_state(to_intel_plane(primary));
- plane_state->visible = false;
- }
- }
+ if (plane_state->visible)
+ crtc->base.state->plane_mask |= 1 << drm_plane_index(primary);
}
static void intel_modeset_readout_hw_state(struct drm_device *dev)
crtc->base.state->active = crtc->active;
crtc->base.enabled = crtc->active;
- memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
- if (crtc->base.state->active) {
- intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
- intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
- WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
-
- /*
- * The initial mode needs to be set in order to keep
- * the atomic core happy. It wants a valid mode if the
- * crtc's enabled, so we do the above call.
- *
- * At this point some state updated by the connectors
- * in their ->detect() callback has not run yet, so
- * no recalculation can be done yet.
- *
- * Even if we could do a recalculation and modeset
- * right now it would cause a double modeset if
- * fbdev or userspace chooses a different initial mode.
- *
- * If that happens, someone indicated they wanted a
- * mode change, which means it's safe to do a full
- * recalculation.
- */
- crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
- }
-
- crtc->base.hwmode = crtc->config->base.adjusted_mode;
- readout_plane_state(crtc, to_intel_crtc_state(crtc->base.state));
+ readout_plane_state(crtc);
DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
crtc->base.base.id,
connector->base.name,
connector->base.encoder ? "enabled" : "disabled");
}
+
+ for_each_intel_crtc(dev, crtc) {
+ crtc->base.hwmode = crtc->config->base.adjusted_mode;
+
+ memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
+ if (crtc->base.state->active) {
+ intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
+ intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
+ WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
+
+ /*
+ * The initial mode needs to be set in order to keep
+ * the atomic core happy. It wants a valid mode if the
+ * crtc's enabled, so we do the above call.
+ *
+ * At this point some state updated by the connectors
+ * in their ->detect() callback has not run yet, so
+ * no recalculation can be done yet.
+ *
+ * Even if we could do a recalculation and modeset
+ * right now it would cause a double modeset if
+ * fbdev or userspace chooses a different initial mode.
+ *
+ * If that happens, someone indicated they wanted a
+ * mode change, which means it's safe to do a full
+ * recalculation.
+ */
+ crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
+ }
+ }
}
/* Scan out the current hw modeset state,
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_FLUSH_ENABLE;
}
if (invalidate_domains) {
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_FLUSH_ENABLE;
}
if (invalidate_domains) {
flags |= PIPE_CONTROL_TLB_INVALIDATE;
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_FLUSH_ENABLE;
}
if (invalidate_domains) {
flags |= PIPE_CONTROL_TLB_INVALIDATE;
struct nouveau_bo *nvbo = nouveau_gem_object(gem);
struct nvkm_vma *vma;
- if (nvbo->bo.mem.mem_type == TTM_PL_TT)
+ if (is_power_of_2(nvbo->valid_domains))
+ rep->domain = nvbo->valid_domains;
+ else if (nvbo->bo.mem.mem_type == TTM_PL_TT)
rep->domain = NOUVEAU_GEM_DOMAIN_GART;
else
rep->domain = NOUVEAU_GEM_DOMAIN_VRAM;
-
rep->offset = nvbo->bo.offset;
if (cli->vm) {
vma = nouveau_bo_vma_find(nvbo, cli->vm);
u8 fan_max_rpm;
/* dpm */
bool dpm_enabled;
+ bool sysfs_initialized;
struct radeon_dpm dpm;
};
struct radeon_device *rdev = dev_get_drvdata(dev);
umode_t effective_mode = attr->mode;
- /* Skip limit attributes if DPM is not enabled */
+ /* Skip attributes if DPM is not enabled */
if (rdev->pm.pm_method != PM_METHOD_DPM &&
(attr == &sensor_dev_attr_temp1_crit.dev_attr.attr ||
- attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr))
+ attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_enable.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_max.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_min.dev_attr.attr))
return 0;
/* Skip fan attributes if fan is not present */
if (rdev->pm.pm_method == PM_METHOD_DPM) {
if (rdev->pm.dpm_enabled) {
- ret = device_create_file(rdev->dev, &dev_attr_power_dpm_state);
- if (ret)
- DRM_ERROR("failed to create device file for dpm state\n");
- ret = device_create_file(rdev->dev, &dev_attr_power_dpm_force_performance_level);
- if (ret)
- DRM_ERROR("failed to create device file for dpm state\n");
- /* XXX: these are noops for dpm but are here for backwards compat */
- ret = device_create_file(rdev->dev, &dev_attr_power_profile);
- if (ret)
- DRM_ERROR("failed to create device file for power profile\n");
- ret = device_create_file(rdev->dev, &dev_attr_power_method);
- if (ret)
- DRM_ERROR("failed to create device file for power method\n");
+ if (!rdev->pm.sysfs_initialized) {
+ ret = device_create_file(rdev->dev, &dev_attr_power_dpm_state);
+ if (ret)
+ DRM_ERROR("failed to create device file for dpm state\n");
+ ret = device_create_file(rdev->dev, &dev_attr_power_dpm_force_performance_level);
+ if (ret)
+ DRM_ERROR("failed to create device file for dpm state\n");
+ /* XXX: these are noops for dpm but are here for backwards compat */
+ ret = device_create_file(rdev->dev, &dev_attr_power_profile);
+ if (ret)
+ DRM_ERROR("failed to create device file for power profile\n");
+ ret = device_create_file(rdev->dev, &dev_attr_power_method);
+ if (ret)
+ DRM_ERROR("failed to create device file for power method\n");
+ if (!ret)
+ rdev->pm.sysfs_initialized = true;
+ }
mutex_lock(&rdev->pm.mutex);
ret = radeon_dpm_late_enable(rdev);
}
}
} else {
- if (rdev->pm.num_power_states > 1) {
+ if ((rdev->pm.num_power_states > 1) &&
+ (!rdev->pm.sysfs_initialized)) {
/* where's the best place to put these? */
ret = device_create_file(rdev->dev, &dev_attr_power_profile);
if (ret)
ret = device_create_file(rdev->dev, &dev_attr_power_method);
if (ret)
DRM_ERROR("failed to create device file for power method\n");
+ if (!ret)
+ rdev->pm.sysfs_initialized = true;
}
}
return ret;
*
* Calls vmw_cmdbuf_ctx_process() on all contexts. If any context has
* command buffers left that are not submitted to hardware, Make sure
- * IRQ handling is turned on. Otherwise, make sure it's turned off. This
- * function may return -EAGAIN to indicate it should be rerun due to
- * possibly missed IRQs if IRQs has just been turned on.
+ * IRQ handling is turned on. Otherwise, make sure it's turned off.
*/
-static int vmw_cmdbuf_man_process(struct vmw_cmdbuf_man *man)
+static void vmw_cmdbuf_man_process(struct vmw_cmdbuf_man *man)
{
- int notempty = 0;
+ int notempty;
struct vmw_cmdbuf_context *ctx;
int i;
+retry:
+ notempty = 0;
for_each_cmdbuf_ctx(man, i, ctx)
vmw_cmdbuf_ctx_process(man, ctx, ¬empty);
man->irq_on = true;
/* Rerun in case we just missed an irq. */
- return -EAGAIN;
+ goto retry;
}
-
- return 0;
}
/**
header->cb_context = cb_context;
list_add_tail(&header->list, &man->ctx[cb_context].submitted);
- if (vmw_cmdbuf_man_process(man) == -EAGAIN)
- vmw_cmdbuf_man_process(man);
+ vmw_cmdbuf_man_process(man);
}
/**
struct vmw_cmdbuf_man *man = (struct vmw_cmdbuf_man *) data;
spin_lock(&man->lock);
- if (vmw_cmdbuf_man_process(man) == -EAGAIN)
- (void) vmw_cmdbuf_man_process(man);
+ vmw_cmdbuf_man_process(man);
spin_unlock(&man->lock);
}
struct vmw_cmdbuf_man *man =
container_of(work, struct vmw_cmdbuf_man, work);
struct vmw_cmdbuf_header *entry, *next;
+ uint32_t dummy;
bool restart = false;
spin_lock_bh(&man->lock);
if (restart && vmw_cmdbuf_startstop(man, true))
DRM_ERROR("Failed restarting command buffer context 0.\n");
+ /* Send a new fence in case one was removed */
+ vmw_fifo_send_fence(man->dev_priv, &dummy);
}
/**
DRM_MM_SEARCH_DEFAULT,
DRM_MM_CREATE_DEFAULT);
if (ret) {
- (void) vmw_cmdbuf_man_process(man);
+ vmw_cmdbuf_man_process(man);
ret = drm_mm_insert_node_generic(&man->mm, info->node,
info->page_size, 0, 0,
DRM_MM_SEARCH_DEFAULT,
drm_mm_init(&man->mm, 0, size >> PAGE_SHIFT);
man->has_pool = true;
- man->default_size = default_size;
+
+ /*
+ * For now, set the default size to VMW_CMDBUF_INLINE_SIZE to
+ * prevent deadlocks from happening when vmw_cmdbuf_space_pool()
+ * needs to wait for space and we block on further command
+ * submissions to be able to free up space.
+ */
+ man->default_size = VMW_CMDBUF_INLINE_SIZE;
DRM_INFO("Using command buffers with %s pool.\n",
(man->using_mob) ? "MOB" : "DMA");
struct i2c_msg *msgs = drv_data->msgs;
int num = drv_data->num_msgs;
- return false;
-
if (!drv_data->offload_enabled)
return false;
{
struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
- clk_disable(alg_data->clk);
+ clk_disable_unprepare(alg_data->clk);
return 0;
}
{
struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
- return clk_enable(alg_data->clk);
+ return clk_prepare_enable(alg_data->clk);
}
static SIMPLE_DEV_PM_OPS(i2c_pnx_pm,
if (IS_ERR(alg_data->ioaddr))
return PTR_ERR(alg_data->ioaddr);
- ret = clk_enable(alg_data->clk);
+ ret = clk_prepare_enable(alg_data->clk);
if (ret)
return ret;
return 0;
out_clock:
- clk_disable(alg_data->clk);
+ clk_disable_unprepare(alg_data->clk);
return ret;
}
struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
i2c_del_adapter(&alg_data->adapter);
- clk_disable(alg_data->clk);
+ clk_disable_unprepare(alg_data->clk);
return 0;
}
#define ST_ACCEL_4_BDU_MASK 0x40
#define ST_ACCEL_4_DRDY_IRQ_ADDR 0x21
#define ST_ACCEL_4_DRDY_IRQ_INT1_MASK 0x04
-#define ST_ACCEL_4_IG1_EN_ADDR 0x21
-#define ST_ACCEL_4_IG1_EN_MASK 0x08
#define ST_ACCEL_4_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 5 */
.drdy_irq = {
.addr = ST_ACCEL_4_DRDY_IRQ_ADDR,
.mask_int1 = ST_ACCEL_4_DRDY_IRQ_INT1_MASK,
- .ig1 = {
- .en_addr = ST_ACCEL_4_IG1_EN_ADDR,
- .en_mask = ST_ACCEL_4_IG1_EN_MASK,
- },
},
.multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT,
.bootime = 2, /* guess */
#include <linux/types.h>
#include <linux/gfp.h>
#include <linux/err.h>
+#include <linux/regulator/consumer.h>
#include <linux/iio/iio.h>
+#define TWL4030_USB_SEL_MADC_MCPC (1<<3)
+#define TWL4030_USB_CARKIT_ANA_CTRL 0xBB
+
/**
* struct twl4030_madc_data - a container for madc info
* @dev: Pointer to device structure for madc
* @lock: Mutex protecting this data structure
+ * @regulator: Pointer to bias regulator for madc
* @requests: Array of request struct corresponding to SW1, SW2 and RT
* @use_second_irq: IRQ selection (main or co-processor)
* @imr: Interrupt mask register of MADC
struct twl4030_madc_data {
struct device *dev;
struct mutex lock; /* mutex protecting this data structure */
+ struct regulator *usb3v1;
struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS];
bool use_second_irq;
u8 imr;
}
twl4030_madc = madc;
+ /* Configure MADC[3:6] */
+ ret = twl_i2c_read_u8(TWL_MODULE_USB, ®val,
+ TWL4030_USB_CARKIT_ANA_CTRL);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to read reg CARKIT_ANA_CTRL 0x%X\n",
+ TWL4030_USB_CARKIT_ANA_CTRL);
+ goto err_i2c;
+ }
+ regval |= TWL4030_USB_SEL_MADC_MCPC;
+ ret = twl_i2c_write_u8(TWL_MODULE_USB, regval,
+ TWL4030_USB_CARKIT_ANA_CTRL);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to write reg CARKIT_ANA_CTRL 0x%X\n",
+ TWL4030_USB_CARKIT_ANA_CTRL);
+ goto err_i2c;
+ }
+
+ /* Enable 3v1 bias regulator for MADC[3:6] */
+ madc->usb3v1 = devm_regulator_get(madc->dev, "vusb3v1");
+ if (IS_ERR(madc->usb3v1))
+ return -ENODEV;
+
+ ret = regulator_enable(madc->usb3v1);
+ if (ret)
+ dev_err(madc->dev, "could not enable 3v1 bias regulator\n");
+
ret = iio_device_register(iio_dev);
if (ret) {
dev_err(&pdev->dev, "could not register iio device\n");
twl4030_madc_set_current_generator(madc, 0, 0);
twl4030_madc_set_power(madc, 0);
+ regulator_disable(madc->usb3v1);
+
return 0;
}
memset(&gid_attr, 0, sizeof(gid_attr));
gid_attr.ndev = ndev;
+ mutex_lock(&table->lock);
ix = find_gid(table, NULL, NULL, true, GID_ATTR_FIND_MASK_DEFAULT);
/* Coudn't find default GID location */
WARN_ON(ix < 0);
- mutex_lock(&table->lock);
if (!__ib_cache_gid_get(ib_dev, port, ix,
¤t_gid, ¤t_gid_attr) &&
mode == IB_CACHE_GID_DEFAULT_MODE_SET &&
case IB_CM_SIDR_REQ_RCVD:
spin_unlock_irq(&cm_id_priv->lock);
cm_reject_sidr_req(cm_id_priv, IB_SIDR_REJECT);
+ spin_lock_irq(&cm.lock);
+ if (!RB_EMPTY_NODE(&cm_id_priv->sidr_id_node))
+ rb_erase(&cm_id_priv->sidr_id_node,
+ &cm.remote_sidr_table);
+ spin_unlock_irq(&cm.lock);
break;
case IB_CM_REQ_SENT:
case IB_CM_MRA_REQ_RCVD:
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
spin_lock_irqsave(&cm.lock, flags);
- rb_erase(&cm_id_priv->sidr_id_node, &cm.remote_sidr_table);
+ if (!RB_EMPTY_NODE(&cm_id_priv->sidr_id_node)) {
+ rb_erase(&cm_id_priv->sidr_id_node, &cm.remote_sidr_table);
+ RB_CLEAR_NODE(&cm_id_priv->sidr_id_node);
+ }
spin_unlock_irqrestore(&cm.lock, flags);
return 0;
sizeof(req->local_gid));
req->has_gid = true;
req->service_id = req_param->primary_path->service_id;
- req->pkey = req_param->bth_pkey;
+ req->pkey = be16_to_cpu(req_param->primary_path->pkey);
break;
case IB_CM_SIDR_REQ_RECEIVED:
req->device = sidr_param->listen_id->device;
req->port = sidr_param->port;
req->has_gid = false;
req->service_id = sidr_param->service_id;
- req->pkey = sidr_param->bth_pkey;
+ req->pkey = sidr_param->pkey;
break;
default:
return -EINVAL;
bind_list = cma_ps_find(rdma_ps_from_service_id(req.service_id),
cma_port_from_service_id(req.service_id));
id_priv = cma_find_listener(bind_list, cm_id, ib_event, &req, *net_dev);
- if (IS_ERR(id_priv)) {
+ if (IS_ERR(id_priv) && *net_dev) {
dev_put(*net_dev);
*net_dev = NULL;
}
u8 port, struct net_device *ndev)
{
struct in_device *in_dev;
+ struct sin_list {
+ struct list_head list;
+ struct sockaddr_in ip;
+ };
+ struct sin_list *sin_iter;
+ struct sin_list *sin_temp;
+ LIST_HEAD(sin_list);
if (ndev->reg_state >= NETREG_UNREGISTERING)
return;
- in_dev = in_dev_get(ndev);
- if (!in_dev)
+ rcu_read_lock();
+ in_dev = __in_dev_get_rcu(ndev);
+ if (!in_dev) {
+ rcu_read_unlock();
return;
+ }
for_ifa(in_dev) {
- struct sockaddr_in ip;
+ struct sin_list *entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
- ip.sin_family = AF_INET;
- ip.sin_addr.s_addr = ifa->ifa_address;
- update_gid_ip(GID_ADD, ib_dev, port, ndev,
- (struct sockaddr *)&ip);
+ if (!entry) {
+ pr_warn("roce_gid_mgmt: couldn't allocate entry for IPv4 update\n");
+ continue;
+ }
+ entry->ip.sin_family = AF_INET;
+ entry->ip.sin_addr.s_addr = ifa->ifa_address;
+ list_add_tail(&entry->list, &sin_list);
}
endfor_ifa(in_dev);
+ rcu_read_unlock();
- in_dev_put(in_dev);
+ list_for_each_entry_safe(sin_iter, sin_temp, &sin_list, list) {
+ update_gid_ip(GID_ADD, ib_dev, port, ndev,
+ (struct sockaddr *)&sin_iter->ip);
+ list_del(&sin_iter->list);
+ kfree(sin_iter);
+ }
}
static void enum_netdev_ipv6_ips(struct ib_device *ib_dev,
if (!file)
return -ENOMEM;
+ file->close_wq = create_singlethread_workqueue("ucma_close_id");
+ if (!file->close_wq) {
+ kfree(file);
+ return -ENOMEM;
+ }
+
INIT_LIST_HEAD(&file->event_list);
INIT_LIST_HEAD(&file->ctx_list);
init_waitqueue_head(&file->poll_wait);
mutex_init(&file->mut);
- file->close_wq = create_singlethread_workqueue("ucma_close_id");
filp->private_data = file;
file->filp = filp;
#define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */
#define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with
6-byte ALPS packet */
-#define ALPS_DELL 0x100 /* device is a Dell laptop */
+#define ALPS_STICK_BITS 0x100 /* separate stick button bits */
#define ALPS_BUTTONPAD 0x200 /* device is a clickpad */
static const struct alps_model_info alps_model_data[] = {
ALPS_PROTO_V8, 0x18, 0x18, 0
};
+/*
+ * Some v2 models report the stick buttons in separate bits
+ */
+static const struct dmi_system_id alps_dmi_has_separate_stick_buttons[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+ {
+ /* Extrapolated from other entries */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D420"),
+ },
+ },
+ {
+ /* Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl> */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D430"),
+ },
+ },
+ {
+ /* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D620"),
+ },
+ },
+ {
+ /* Extrapolated from other entries */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D630"),
+ },
+ },
+#endif
+ { }
+};
+
static void alps_set_abs_params_st(struct alps_data *priv,
struct input_dev *dev1);
static void alps_set_abs_params_semi_mt(struct alps_data *priv,
return;
}
- /* Dell non interleaved V2 dualpoint has separate stick button bits */
- if (priv->proto_version == ALPS_PROTO_V2 &&
- priv->flags == (ALPS_DELL | ALPS_PASS | ALPS_DUALPOINT)) {
+ /* Some models have separate stick button bits */
+ if (priv->flags & ALPS_STICK_BITS) {
left |= packet[0] & 1;
right |= packet[0] & 2;
middle |= packet[0] & 4;
priv->byte0 = protocol->byte0;
priv->mask0 = protocol->mask0;
priv->flags = protocol->flags;
- if (dmi_name_in_vendors("Dell"))
- priv->flags |= ALPS_DELL;
priv->x_max = 2000;
priv->y_max = 1400;
priv->set_abs_params = alps_set_abs_params_st;
priv->x_max = 1023;
priv->y_max = 767;
+ if (dmi_check_system(alps_dmi_has_separate_stick_buttons))
+ priv->flags |= ALPS_STICK_BITS;
break;
case ALPS_PROTO_V3:
config TOUCHSCREEN_SUR40
tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
+ depends on VIDEO_V4L2
select INPUT_POLLDEV
select VIDEOBUF2_DMA_SG
help
tsc_readl(tsc, LPC32XX_TSC_CON) &
~LPC32XX_TSC_ADCCON_AUTO_EN);
- clk_disable(tsc->clk);
+ clk_disable_unprepare(tsc->clk);
}
static void lpc32xx_setup_tsc(struct lpc32xx_tsc *tsc)
{
u32 tmp;
- clk_enable(tsc->clk);
+ clk_prepare_enable(tsc->clk);
tmp = tsc_readl(tsc, LPC32XX_TSC_CON) & ~LPC32XX_TSC_ADCCON_POWER_UP;
static void clear_dte_entry(u16 devid)
{
/* remove entry from the device table seen by the hardware */
- amd_iommu_dev_table[devid].data[0] = IOMMU_PTE_P | IOMMU_PTE_TV;
- amd_iommu_dev_table[devid].data[1] = 0;
+ amd_iommu_dev_table[devid].data[0] = IOMMU_PTE_P | IOMMU_PTE_TV;
+ amd_iommu_dev_table[devid].data[1] &= DTE_FLAG_MASK;
amd_iommu_apply_erratum_63(devid);
}
#define IOMMU_PTE_IR (1ULL << 61)
#define IOMMU_PTE_IW (1ULL << 62)
+#define DTE_FLAG_MASK (0x3ffULL << 32)
#define DTE_FLAG_IOTLB (0x01UL << 32)
#define DTE_FLAG_GV (0x01ULL << 55)
#define DTE_GLX_SHIFT (56)
goto out;
}
+ if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) {
+ /* handle_mm_fault would BUG_ON() */
+ up_read(&mm->mmap_sem);
+ handle_fault_error(fault);
+ goto out;
+ }
+
ret = handle_mm_fault(mm, vma, address, write);
if (ret & VM_FAULT_ERROR) {
/* failed to service fault */
return -ENOMEM;
/* It is large page*/
if (largepage_lvl > 1) {
+ unsigned long nr_superpages, end_pfn;
+
pteval |= DMA_PTE_LARGE_PAGE;
lvl_pages = lvl_to_nr_pages(largepage_lvl);
+
+ nr_superpages = sg_res / lvl_pages;
+ end_pfn = iov_pfn + nr_superpages * lvl_pages - 1;
+
/*
* Ensure that old small page tables are
- * removed to make room for superpage,
- * if they exist.
+ * removed to make room for superpage(s).
*/
- dma_pte_free_pagetable(domain, iov_pfn,
- iov_pfn + lvl_pages - 1);
+ dma_pte_free_pagetable(domain, iov_pfn, end_pfn);
} else {
pteval &= ~(uint64_t)DMA_PTE_LARGE_PAGE;
}
disk_super = dm_block_data(sblock);
+ disk_super->flags = cpu_to_le32(cmd->flags);
if (mutator)
update_flags(disk_super, mutator);
- disk_super->flags = cpu_to_le32(cmd->flags);
disk_super->mapping_root = cpu_to_le64(cmd->root);
disk_super->hint_root = cpu_to_le64(cmd->hint_root);
disk_super->discard_root = cpu_to_le64(cmd->discard_root);
{
int s;
uint32_t max_entries = le32_to_cpu(left->header.max_entries);
- unsigned target = (nr_left + nr_center + nr_right) / 3;
- BUG_ON(target > max_entries);
+ unsigned total = nr_left + nr_center + nr_right;
+ unsigned target_right = total / 3;
+ unsigned remainder = (target_right * 3) != total;
+ unsigned target_left = target_right + remainder;
+
+ BUG_ON(target_left > max_entries);
+ BUG_ON(target_right > max_entries);
if (nr_left < nr_right) {
- s = nr_left - target;
+ s = nr_left - target_left;
if (s < 0 && nr_center < -s) {
/* not enough in central node */
} else
shift(left, center, s);
- shift(center, right, target - nr_right);
+ shift(center, right, target_right - nr_right);
} else {
- s = target - nr_right;
+ s = target_right - nr_right;
if (s > 0 && nr_center < s) {
/* not enough in central node */
shift(center, right, nr_center);
} else
shift(center, right, s);
- shift(left, center, nr_left - target);
+ shift(left, center, nr_left - target_left);
}
*key_ptr(parent, c->index) = center->keys[0];
r = new_block(s->info, &right);
if (r < 0) {
- /* FIXME: put left */
+ unlock_block(s->info, left);
return r;
}
bio_trim(wbio, sector - r1_bio->sector, sectors);
wbio->bi_iter.bi_sector += rdev->data_offset;
wbio->bi_bdev = rdev->bdev;
- if (submit_bio_wait(WRITE, wbio) == 0)
+ if (submit_bio_wait(WRITE, wbio) < 0)
/* failure! */
ok = rdev_set_badblocks(rdev, sector,
sectors, 0)
rdev_dec_pending(conf->mirrors[m].rdev,
conf->mddev);
}
- if (test_bit(R1BIO_WriteError, &r1_bio->state))
- close_write(r1_bio);
if (fail) {
spin_lock_irq(&conf->device_lock);
list_add(&r1_bio->retry_list, &conf->bio_end_io_list);
spin_unlock_irq(&conf->device_lock);
md_wakeup_thread(conf->mddev->thread);
- } else
+ } else {
+ if (test_bit(R1BIO_WriteError, &r1_bio->state))
+ close_write(r1_bio);
raid_end_bio_io(r1_bio);
+ }
}
static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio)
r1_bio = list_first_entry(&tmp, struct r1bio,
retry_list);
list_del(&r1_bio->retry_list);
+ if (mddev->degraded)
+ set_bit(R1BIO_Degraded, &r1_bio->state);
+ if (test_bit(R1BIO_WriteError, &r1_bio->state))
+ close_write(r1_bio);
raid_end_bio_io(r1_bio);
}
}
* far_copies (stored in second byte of layout)
* far_offset (stored in bit 16 of layout )
* use_far_sets (stored in bit 17 of layout )
+ * use_far_sets_bugfixed (stored in bit 18 of layout )
*
* The data to be stored is divided into chunks using chunksize. Each device
* is divided into far_copies sections. In each section, chunks are laid out
seq_printf(seq, " %d offset-copies", conf->geo.far_copies);
else
seq_printf(seq, " %d far-copies", conf->geo.far_copies);
+ if (conf->geo.far_set_size != conf->geo.raid_disks)
+ seq_printf(seq, " %d devices per set", conf->geo.far_set_size);
}
seq_printf(seq, " [%d/%d] [", conf->geo.raid_disks,
conf->geo.raid_disks - mddev->degraded);
choose_data_offset(r10_bio, rdev) +
(sector - r10_bio->sector));
wbio->bi_bdev = rdev->bdev;
- if (submit_bio_wait(WRITE, wbio) == 0)
+ if (submit_bio_wait(WRITE, wbio) < 0)
/* Failure! */
ok = rdev_set_badblocks(rdev, sector,
sectors, 0)
rdev_dec_pending(rdev, conf->mddev);
}
}
- if (test_bit(R10BIO_WriteError,
- &r10_bio->state))
- close_write(r10_bio);
if (fail) {
spin_lock_irq(&conf->device_lock);
list_add(&r10_bio->retry_list, &conf->bio_end_io_list);
spin_unlock_irq(&conf->device_lock);
md_wakeup_thread(conf->mddev->thread);
- } else
+ } else {
+ if (test_bit(R10BIO_WriteError,
+ &r10_bio->state))
+ close_write(r10_bio);
raid_end_bio_io(r10_bio);
+ }
}
}
r10_bio = list_first_entry(&tmp, struct r10bio,
retry_list);
list_del(&r10_bio->retry_list);
+ if (mddev->degraded)
+ set_bit(R10BIO_Degraded, &r10_bio->state);
+
+ if (test_bit(R10BIO_WriteError,
+ &r10_bio->state))
+ close_write(r10_bio);
raid_end_bio_io(r10_bio);
}
}
disks = mddev->raid_disks + mddev->delta_disks;
break;
}
- if (layout >> 18)
+ if (layout >> 19)
return -1;
if (chunk < (PAGE_SIZE >> 9) ||
!is_power_of_2(chunk))
geo->near_copies = nc;
geo->far_copies = fc;
geo->far_offset = fo;
- geo->far_set_size = (layout & (1<<17)) ? disks / fc : disks;
+ switch (layout >> 17) {
+ case 0: /* original layout. simple but not always optimal */
+ geo->far_set_size = disks;
+ break;
+ case 1: /* "improved" layout which was buggy. Hopefully no-one is
+ * actually using this, but leave code here just in case.*/
+ geo->far_set_size = disks/fc;
+ WARN(geo->far_set_size < fc,
+ "This RAID10 layout does not provide data safety - please backup and create new array\n");
+ break;
+ case 2: /* "improved" layout fixed to match documentation */
+ geo->far_set_size = fc * nc;
+ break;
+ default: /* Not a valid layout */
+ return -1;
+ }
geo->chunk_mask = chunk - 1;
geo->chunk_shift = ffz(~chunk);
return nc*fc;
const struct horus3a_config *config,
struct i2c_adapter *i2c);
#else
-static inline struct dvb_frontend *horus3a_attach(
- const struct cxd2820r_config *config,
+static inline struct dvb_frontend *horus3a_attach(struct dvb_frontend *fe,
+ const struct horus3a_config *config,
struct i2c_adapter *i2c)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
struct lnbh25_config *cfg,
struct i2c_adapter *i2c);
#else
-static inline dvb_frontend *lnbh25_attach(
+static inline struct dvb_frontend *lnbh25_attach(
struct dvb_frontend *fe,
struct lnbh25_config *cfg,
struct i2c_adapter *i2c)
static struct dvb_frontend_ops m88ds3103_ops;
+/* write single register with mask */
+static int m88ds3103_update_bits(struct m88ds3103_dev *dev,
+ u8 reg, u8 mask, u8 val)
+{
+ int ret;
+ u8 tmp;
+
+ /* no need for read if whole reg is written */
+ if (mask != 0xff) {
+ ret = regmap_bulk_read(dev->regmap, reg, &tmp, 1);
+ if (ret)
+ return ret;
+
+ val &= mask;
+ tmp &= ~mask;
+ val |= tmp;
+ }
+
+ return regmap_bulk_write(dev->regmap, reg, &val, 1);
+}
+
/* write reg val table using reg addr auto increment */
static int m88ds3103_wr_reg_val_tab(struct m88ds3103_dev *dev,
const struct m88ds3103_reg_val *tab, int tab_len)
u8tmp2 = 0x00; /* 0b00 */
break;
}
- ret = regmap_update_bits(dev->regmap, 0x22, 0xc0, u8tmp1 << 6);
+ ret = m88ds3103_update_bits(dev, 0x22, 0xc0, u8tmp1 << 6);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x24, 0xc0, u8tmp2 << 6);
+ ret = m88ds3103_update_bits(dev, 0x24, 0xc0, u8tmp2 << 6);
if (ret)
goto err;
}
if (ret)
goto err;
}
- ret = regmap_update_bits(dev->regmap, 0x9d, 0x08, 0x08);
+ ret = m88ds3103_update_bits(dev, 0x9d, 0x08, 0x08);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0xf1, 0x01);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x30, 0x80, 0x80);
+ ret = m88ds3103_update_bits(dev, 0x30, 0x80, 0x80);
if (ret)
goto err;
}
switch (dev->cfg->ts_mode) {
case M88DS3103_TS_SERIAL:
case M88DS3103_TS_SERIAL_D7:
- ret = regmap_update_bits(dev->regmap, 0x29, 0x20, u8tmp1);
+ ret = m88ds3103_update_bits(dev, 0x29, 0x20, u8tmp1);
if (ret)
goto err;
u8tmp1 = 0;
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x4d, 0x02, dev->cfg->spec_inv << 1);
+ ret = m88ds3103_update_bits(dev, 0x4d, 0x02, dev->cfg->spec_inv << 1);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x30, 0x10, dev->cfg->agc_inv << 4);
+ ret = m88ds3103_update_bits(dev, 0x30, 0x10, dev->cfg->agc_inv << 4);
if (ret)
goto err;
dev->warm = false;
/* wake up device from sleep */
- ret = regmap_update_bits(dev->regmap, 0x08, 0x01, 0x01);
+ ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x01);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x04, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x00);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x23, 0x10, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x00);
if (ret)
goto err;
utmp = 0x29;
else
utmp = 0x27;
- ret = regmap_update_bits(dev->regmap, utmp, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, utmp, 0x01, 0x00);
if (ret)
goto err;
/* sleep */
- ret = regmap_update_bits(dev->regmap, 0x08, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x04, 0x01, 0x01);
+ ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x23, 0x10, 0x10);
+ ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
if (ret)
goto err;
}
utmp = tone << 7 | dev->cfg->envelope_mode << 5;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xe0, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
utmp = 1 << 2;
- ret = regmap_update_bits(dev->regmap, 0xa1, reg_a1_mask, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa1, reg_a1_mask, utmp);
if (ret)
goto err;
voltage_dis ^= dev->cfg->lnb_en_pol;
utmp = voltage_dis << 1 | voltage_sel << 0;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0x03, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0x03, utmp);
if (ret)
goto err;
}
utmp = dev->cfg->envelope_mode << 5;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xe0, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
} else {
dev_dbg(&client->dev, "diseqc tx timeout\n");
- ret = regmap_update_bits(dev->regmap, 0xa1, 0xc0, 0x40);
+ ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
if (ret)
goto err;
}
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xc0, 0x80);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
if (ret)
goto err;
}
utmp = dev->cfg->envelope_mode << 5;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xe0, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
} else {
dev_dbg(&client->dev, "diseqc tx timeout\n");
- ret = regmap_update_bits(dev->regmap, 0xa1, 0xc0, 0x40);
+ ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
if (ret)
goto err;
}
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xc0, 0x80);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
if (ret)
goto err;
goto err_kfree;
/* sleep */
- ret = regmap_update_bits(dev->regmap, 0x08, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
if (ret)
goto err_kfree;
- ret = regmap_update_bits(dev->regmap, 0x04, 0x01, 0x01);
+ ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
if (ret)
goto err_kfree;
- ret = regmap_update_bits(dev->regmap, 0x23, 0x10, 0x10);
+ ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
if (ret)
goto err_kfree;
/* firmware is in the new format */
for (remaining = fw->size; remaining > 0; remaining -= 17) {
len = fw->data[fw->size - remaining];
+ if (len > SI2168_ARGLEN) {
+ ret = -EINVAL;
+ break;
+ }
memcpy(cmd.args, &fw->data[(fw->size - remaining) + 1], len);
cmd.wlen = len;
cmd.rlen = 1;
u16 reg;
unsigned long flags;
- if (!spi) {
- dev_dbg(&spi->master->dev,
- "%s(): SPI not initialized\n", __func__);
+ if (!spi)
return IRQ_NONE;
- }
+
spin_lock_irqsave(&spi->lock, flags);
reg = readw(&spi->regs->control_stat);
if (!(reg & NETUP_SPI_CTRL_IRQ)) {
unsigned long flags;
struct netup_spi *spi = ndev->spi;
- if (!spi) {
- dev_dbg(&spi->master->dev,
- "%s(): SPI not initialized\n", __func__);
+ if (!spi)
return;
- }
+
spin_lock_irqsave(&spi->lock, flags);
reg = readw(&spi->regs->control_stat);
writew(reg | NETUP_SPI_CTRL_IRQ, &spi->regs->control_stat);
Elf32_Ehdr *ehdr;
Elf32_Phdr *phdr;
u8 __iomem *dst;
- int err, i;
+ int err = 0, i;
if (!fw || !context)
return -EINVAL;
phdr = (Elf32_Phdr *)(fw->data + ehdr->e_phoff);
/* go through the available ELF segments */
- for (i = 0; i < ehdr->e_phnum && !err; i++, phdr++) {
+ for (i = 0; i < ehdr->e_phnum; i++, phdr++) {
/* Only consider LOAD segments */
if (phdr->p_type != PT_LOAD)
static int load_c8sectpfe_fw_step1(struct c8sectpfei *fei)
{
- int ret;
int err;
dev_info(fei->dev, "Loading firmware: %s\n", FIRMWARE_MEMDMA);
if (err) {
dev_err(fei->dev, "request_firmware_nowait err: %d.\n", err);
complete_all(&fei->fw_ack);
- return ret;
+ return err;
}
return 0;
goto clkerr;
if (devm_request_irq(dev, priv->irq, hix5hd2_ir_rx_interrupt,
- IRQF_NO_SUSPEND, pdev->name, priv) < 0) {
+ 0, pdev->name, priv) < 0) {
dev_err(dev, "IRQ %d register failed\n", priv->irq);
ret = -EINVAL;
goto regerr;
for (remaining = fw->size; remaining > 0; remaining -= 17) {
len = fw->data[fw->size - remaining];
+ if (len > SI2157_ARGLEN) {
+ dev_err(&client->dev, "Bad firmware length\n");
+ goto err_release_firmware;
+ }
memcpy(cmd.args, &fw->data[(fw->size - remaining) + 1], len);
cmd.wlen = len;
cmd.rlen = 1;
unsigned int pipe;
u8 requesttype;
+ mutex_lock(&d->usb_mutex);
+
+ if (req->size > sizeof(dev->buf)) {
+ dev_err(&d->intf->dev, "too large message %u\n", req->size);
+ ret = -EINVAL;
+ goto err_mutex_unlock;
+ }
+
if (req->index & CMD_WR_FLAG) {
/* write */
memcpy(dev->buf, req->data, req->size);
dvb_usb_dbg_usb_control_msg(d->udev, 0, requesttype, req->value,
req->index, dev->buf, req->size);
if (ret < 0)
- goto err;
+ goto err_mutex_unlock;
/* read request, copy returned data to return buf */
if (requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
memcpy(req->data, dev->buf, req->size);
+ mutex_unlock(&d->usb_mutex);
+
return 0;
-err:
+err_mutex_unlock:
+ mutex_unlock(&d->usb_mutex);
dev_dbg(&d->intf->dev, "failed=%d\n", ret);
return ret;
}
struct rtl28xxu_dev {
- u8 buf[28];
+ u8 buf[128];
u8 chip_id;
u8 tuner;
char *tuner_name;
# Used by LED subsystem flash drivers
config V4L2_FLASH_LED_CLASS
tristate "V4L2 flash API for LED flash class devices"
- depends on VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on LEDS_CLASS_FLASH
---help---
Say Y here to enable V4L2 flash API support for LED flash
memory drives like NOR, NAND, OneNAND, SRAM.
config OMAP_GPMC_DEBUG
- bool
+ bool "Enable GPMC debug output and skip reset of GPMC during init"
depends on OMAP_GPMC
help
Enables verbose debugging mostly to decode the bootloader provided
- timings. Enable this during development to configure devices
- connected to the GPMC bus.
+ timings. To preserve the bootloader provided timings, the reset
+ of GPMC is skipped during init. Enable this during development to
+ configure devices connected to the GPMC bus.
+
+ NOTE: In addition to matching the register setup with the bootloader
+ you also need to match the GPMC FCLK frequency used by the
+ bootloader or else the GPMC timings won't be identical with the
+ bootloader timings.
config MVEBU_DEVBUS
bool "Marvell EBU Device Bus Controller"
int div;
u32 l;
- gpmc_cs_show_timings(cs, "before gpmc_cs_set_timings");
div = gpmc_calc_divider(t->sync_clk);
if (div < 0)
return div;
if (ret < 0)
goto err;
+ gpmc_cs_show_timings(cs, "before gpmc_cs_program_settings");
ret = gpmc_cs_program_settings(cs, &gpmc_s);
if (ret < 0)
goto err;
/*
* eMMC hardware reset.
*/
-static int mmc_test_hw_reset(struct mmc_test_card *test)
+static int mmc_test_reset(struct mmc_test_card *test)
{
struct mmc_card *card = test->card;
struct mmc_host *host = card->host;
int err;
- if (!mmc_card_mmc(card) || !mmc_can_reset(card))
- return RESULT_UNSUP_CARD;
-
err = mmc_hw_reset(host);
if (!err)
return RESULT_OK;
},
{
- .name = "eMMC hardware reset",
- .run = mmc_test_hw_reset,
+ .name = "Reset test",
+ .run = mmc_test_reset,
},
};
static int mmc_reset(struct mmc_host *host)
{
struct mmc_card *card = host->card;
- u32 status;
if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
return -EOPNOTSUPP;
host->ops->hw_reset(host);
- /* If the reset has happened, then a status command will fail */
- if (!mmc_send_status(card, &status)) {
- mmc_host_clk_release(host);
- return -ENOSYS;
- }
-
/* Set initial state and call mmc_set_ios */
mmc_set_initial_state(host);
mmc_host_clk_release(host);
if (ret)
return ret;
- if (!node_online(node))
+ if (node >= MAX_NUMNODES || !node_online(node))
return -EINVAL;
add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
}
/* Now look up the logical CPU number */
- for_each_possible_cpu(cpu)
- if (dn == of_cpu_device_node_get(cpu))
+ for_each_possible_cpu(cpu) {
+ struct device_node *cpu_dn;
+
+ cpu_dn = of_cpu_device_node_get(cpu);
+ of_node_put(cpu_dn);
+
+ if (dn == cpu_dn)
break;
+ }
if (cpu >= nr_cpu_ids) {
pr_warn("Failed to find logical CPU for %s\n",
if (ret)
goto error_ret;
- for (i = 0; i < num_read; i++)
+ for (i = 0; i < num_read / sizeof(u16); i++)
*(((u16 *)rx) + i) = be16_to_cpup((__be16 *)rx + i);
if (copy_to_user(buf, rx, num_read))
case IIO_CHAN_INFO_OFFSET:
if (chan->type == IIO_TEMP) {
/* The calculated value from the ADC is in Kelvin, we
- * want Celsius for hwmon so the offset is
- * -272.15 * scale
+ * want Celsius for hwmon so the offset is -273.15
+ * The offset is applied before scaling so it is
+ * actually -213.15 * 4 / 1.012 = -1079.644268
*/
- *val = -1075;
- *val2 = 691699;
+ *val = -1079;
+ *val2 = 644268;
return IIO_VAL_INT_PLUS_MICRO;
}
if (data->soc == SOC_ARCH_EXYNOS5260)
emul_con = EXYNOS5260_EMUL_CON;
- if (data->soc == SOC_ARCH_EXYNOS5433)
+ else if (data->soc == SOC_ARCH_EXYNOS5433)
emul_con = EXYNOS5433_TMU_EMUL_CON;
else if (data->soc == SOC_ARCH_EXYNOS7)
emul_con = EXYNOS7_TMU_REG_EMUL_CON;
return 0;
dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
- if (dma->tx_size < p->port.fifosize) {
- ret = -EINVAL;
- goto err;
- }
desc = dmaengine_prep_slave_single(dma->txchan,
dma->tx_addr + xmit->tail,
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+ xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
}
/* Fast path - was this the last TRB in the TD for this URB? */
} else if (event_trb == td->last_trb) {
+ if (td->urb_length_set && trb_comp_code == COMP_SHORT_TX)
+ return finish_td(xhci, td, event_trb, event, ep,
+ status, false);
+
if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
td->urb->actual_length =
td->urb->transfer_buffer_length -
td->urb->actual_length +=
TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
+
+ if (trb_comp_code == COMP_SHORT_TX) {
+ xhci_dbg(xhci, "mid bulk/intr SP, wait for last TRB event\n");
+ td->urb_length_set = true;
+ return 0;
+ }
}
return finish_td(xhci, td, event_trb, event, ep, status, false);
u32 trb_comp_code;
int ret = 0;
int td_num = 0;
+ bool handling_skipped_tds = false;
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
xdev = xhci->devs[slot_id];
ep->skip = true;
xhci_dbg(xhci, "Miss service interval error, set skip flag\n");
goto cleanup;
+ case COMP_PING_ERR:
+ ep->skip = true;
+ xhci_dbg(xhci, "No Ping response error, Skip one Isoc TD\n");
+ goto cleanup;
default:
if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
status = 0;
ep, &status);
cleanup:
+
+
+ handling_skipped_tds = ep->skip &&
+ trb_comp_code != COMP_MISSED_INT &&
+ trb_comp_code != COMP_PING_ERR;
+
/*
- * Do not update event ring dequeue pointer if ep->skip is set.
- * Will roll back to continue process missed tds.
+ * Do not update event ring dequeue pointer if we're in a loop
+ * processing missed tds.
*/
- if (trb_comp_code == COMP_MISSED_INT || !ep->skip) {
+ if (!handling_skipped_tds)
inc_deq(xhci, xhci->event_ring);
- }
if (ret) {
urb = td->urb;
* Process them as short transfer until reach the td pointed by
* the event.
*/
- } while (ep->skip && trb_comp_code != COMP_MISSED_INT);
+ } while (handling_skipped_tds);
return 0;
}
con_copy_unimap(vc, svc);
ops = info->fbcon_par;
+ ops->cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms);
p->con_rotate = initial_rotation;
set_blitting_type(vc, info);
alloc_start);
if (ret)
goto out;
- } else {
+ } else if (offset + len > inode->i_size) {
/*
* If we are fallocating from the end of the file onward we
* need to zero out the end of the page if i_size lands in the
if (bctl->flags & ~(BTRFS_BALANCE_ARGS_MASK | BTRFS_BALANCE_TYPE_MASK)) {
ret = -EINVAL;
- goto out_bargs;
+ goto out_bctl;
}
do_balance:
need_unlock = false;
ret = btrfs_balance(bctl, bargs);
+ bctl = NULL;
if (arg) {
if (copy_to_user(arg, bargs, sizeof(*bargs)))
ret = -EFAULT;
}
+out_bctl:
+ kfree(bctl);
out_bargs:
kfree(bargs);
out_unlock:
struct wb_writeback_work *base_work,
bool skip_if_busy)
{
- int next_memcg_id = 0;
- struct bdi_writeback *wb;
- struct wb_iter iter;
+ struct bdi_writeback *last_wb = NULL;
+ struct bdi_writeback *wb = list_entry_rcu(&bdi->wb_list,
+ struct bdi_writeback, bdi_node);
might_sleep();
restart:
rcu_read_lock();
- bdi_for_each_wb(wb, bdi, &iter, next_memcg_id) {
+ list_for_each_entry_continue_rcu(wb, &bdi->wb_list, bdi_node) {
DEFINE_WB_COMPLETION_ONSTACK(fallback_work_done);
struct wb_writeback_work fallback_work;
struct wb_writeback_work *work;
long nr_pages;
+ if (last_wb) {
+ wb_put(last_wb);
+ last_wb = NULL;
+ }
+
/* SYNC_ALL writes out I_DIRTY_TIME too */
if (!wb_has_dirty_io(wb) &&
(base_work->sync_mode == WB_SYNC_NONE ||
wb_queue_work(wb, work);
- next_memcg_id = wb->memcg_css->id + 1;
+ /*
+ * Pin @wb so that it stays on @bdi->wb_list. This allows
+ * continuing iteration from @wb after dropping and
+ * regrabbing rcu read lock.
+ */
+ wb_get(wb);
+ last_wb = wb;
+
rcu_read_unlock();
wb_wait_for_completion(bdi, &fallback_work_done);
goto restart;
}
rcu_read_unlock();
+
+ if (last_wb)
+ wb_put(last_wb);
}
#else /* CONFIG_CGROUP_WRITEBACK */
rcu_read_lock();
list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
struct bdi_writeback *wb;
- struct wb_iter iter;
if (!bdi_has_dirty_io(bdi))
continue;
- bdi_for_each_wb(wb, bdi, &iter, 0)
+ list_for_each_entry_rcu(wb, &bdi->wb_list, bdi_node)
wb_start_writeback(wb, wb_split_bdi_pages(wb, nr_pages),
false, reason);
}
rcu_read_lock();
list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
struct bdi_writeback *wb;
- struct wb_iter iter;
- bdi_for_each_wb(wb, bdi, &iter, 0)
- if (!list_empty(&bdi->wb.b_dirty_time))
- wb_wakeup(&bdi->wb);
+ list_for_each_entry_rcu(wb, &bdi->wb_list, bdi_node)
+ if (!list_empty(&wb->b_dirty_time))
+ wb_wakeup(wb);
}
rcu_read_unlock();
schedule_delayed_work(&dirtytime_work, dirtytime_expire_interval * HZ);
if (ret < 0) {
mlog(ML_ERROR, "failed to dispatch assert master work\n");
response = DLM_MASTER_RESP_ERROR;
+ spin_unlock(&res->spinlock);
dlm_lockres_put(res);
} else {
dispatched = 1;
__dlm_lockres_grab_inflight_worker(dlm, res);
+ spin_unlock(&res->spinlock);
}
- spin_unlock(&res->spinlock);
} else {
if (res)
dlm_lockres_put(res);
} else {
dispatched = 1;
__dlm_lockres_grab_inflight_worker(dlm, res);
+ spin_unlock(&res->spinlock);
}
- spin_unlock(&res->spinlock);
} else {
/* put.. incase we are not the master */
spin_unlock(&res->spinlock);
struct list_head work_list;
struct delayed_work dwork; /* work item used for writeback */
+ struct list_head bdi_node; /* anchored at bdi->wb_list */
+
#ifdef CONFIG_CGROUP_WRITEBACK
struct percpu_ref refcnt; /* used only for !root wb's */
struct fprop_local_percpu memcg_completions;
atomic_long_t tot_write_bandwidth;
struct bdi_writeback wb; /* the root writeback info for this bdi */
+ struct list_head wb_list; /* list of all wbs */
#ifdef CONFIG_CGROUP_WRITEBACK
struct radix_tree_root cgwb_tree; /* radix tree of active cgroup wbs */
struct rb_root cgwb_congested_tree; /* their congested states */
#include <linux/slab.h>
int __must_check bdi_init(struct backing_dev_info *bdi);
-void bdi_destroy(struct backing_dev_info *bdi);
+void bdi_exit(struct backing_dev_info *bdi);
__printf(3, 4)
int bdi_register(struct backing_dev_info *bdi, struct device *parent,
const char *fmt, ...);
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
+void bdi_unregister(struct backing_dev_info *bdi);
+
int __must_check bdi_setup_and_register(struct backing_dev_info *, char *);
+void bdi_destroy(struct backing_dev_info *bdi);
+
void wb_start_writeback(struct bdi_writeback *wb, long nr_pages,
bool range_cyclic, enum wb_reason reason);
void wb_start_background_writeback(struct bdi_writeback *wb);
rcu_read_unlock();
}
-struct wb_iter {
- int start_memcg_id;
- struct radix_tree_iter tree_iter;
- void **slot;
-};
-
-static inline struct bdi_writeback *__wb_iter_next(struct wb_iter *iter,
- struct backing_dev_info *bdi)
-{
- struct radix_tree_iter *titer = &iter->tree_iter;
-
- WARN_ON_ONCE(!rcu_read_lock_held());
-
- if (iter->start_memcg_id >= 0) {
- iter->slot = radix_tree_iter_init(titer, iter->start_memcg_id);
- iter->start_memcg_id = -1;
- } else {
- iter->slot = radix_tree_next_slot(iter->slot, titer, 0);
- }
-
- if (!iter->slot)
- iter->slot = radix_tree_next_chunk(&bdi->cgwb_tree, titer, 0);
- if (iter->slot)
- return *iter->slot;
- return NULL;
-}
-
-static inline struct bdi_writeback *__wb_iter_init(struct wb_iter *iter,
- struct backing_dev_info *bdi,
- int start_memcg_id)
-{
- iter->start_memcg_id = start_memcg_id;
-
- if (start_memcg_id)
- return __wb_iter_next(iter, bdi);
- else
- return &bdi->wb;
-}
-
-/**
- * bdi_for_each_wb - walk all wb's of a bdi in ascending memcg ID order
- * @wb_cur: cursor struct bdi_writeback pointer
- * @bdi: bdi to walk wb's of
- * @iter: pointer to struct wb_iter to be used as iteration buffer
- * @start_memcg_id: memcg ID to start iteration from
- *
- * Iterate @wb_cur through the wb's (bdi_writeback's) of @bdi in ascending
- * memcg ID order starting from @start_memcg_id. @iter is struct wb_iter
- * to be used as temp storage during iteration. rcu_read_lock() must be
- * held throughout iteration.
- */
-#define bdi_for_each_wb(wb_cur, bdi, iter, start_memcg_id) \
- for ((wb_cur) = __wb_iter_init(iter, bdi, start_memcg_id); \
- (wb_cur); (wb_cur) = __wb_iter_next(iter, bdi))
-
#else /* CONFIG_CGROUP_WRITEBACK */
static inline bool inode_cgwb_enabled(struct inode *inode)
{
}
-struct wb_iter {
- int next_id;
-};
-
-#define bdi_for_each_wb(wb_cur, bdi, iter, start_blkcg_id) \
- for ((iter)->next_id = (start_blkcg_id); \
- ({ (wb_cur) = !(iter)->next_id++ ? &(bdi)->wb : NULL; }); )
-
static inline int inode_congested(struct inode *inode, int cong_bits)
{
return wb_congested(&inode_to_bdi(inode)->wb, cong_bits);
if (!throtl) {
blkg = blkg ?: q->root_blkg;
- blkg_rwstat_add(&blkg->stat_bytes, bio->bi_flags,
+ blkg_rwstat_add(&blkg->stat_bytes, bio->bi_rw,
bio->bi_iter.bi_size);
- blkg_rwstat_add(&blkg->stat_ios, bio->bi_flags, 1);
+ blkg_rwstat_add(&blkg->stat_ios, bio->bi_rw, 1);
}
rcu_read_unlock();
extern int cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
unsigned int order_per_bit,
struct cma **res_cma);
-extern struct page *cma_alloc(struct cma *cma, unsigned int count, unsigned int align);
+extern struct page *cma_alloc(struct cma *cma, size_t count, unsigned int align);
extern bool cma_release(struct cma *cma, const struct page *pages, unsigned int count);
#endif
#define KASAN_ABI_VERSION 3
#endif
+#if GCC_VERSION >= 40902
+/*
+ * Tell the compiler that address safety instrumentation (KASAN)
+ * should not be applied to that function.
+ * Conflicts with inlining: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
+ */
+#define __no_sanitize_address __attribute__((no_sanitize_address))
+#endif
+
#endif /* gcc version >= 40000 specific checks */
#if !defined(__noclone)
#define __noclone /* not needed */
#endif
+#if !defined(__no_sanitize_address)
+#define __no_sanitize_address
+#endif
+
/*
* A trick to suppress uninitialized variable warning without generating any
* code
#include <uapi/linux/types.h>
-static __always_inline void __read_once_size(const volatile void *p, void *res, int size)
+#define __READ_ONCE_SIZE \
+({ \
+ switch (size) { \
+ case 1: *(__u8 *)res = *(volatile __u8 *)p; break; \
+ case 2: *(__u16 *)res = *(volatile __u16 *)p; break; \
+ case 4: *(__u32 *)res = *(volatile __u32 *)p; break; \
+ case 8: *(__u64 *)res = *(volatile __u64 *)p; break; \
+ default: \
+ barrier(); \
+ __builtin_memcpy((void *)res, (const void *)p, size); \
+ barrier(); \
+ } \
+})
+
+static __always_inline
+void __read_once_size(const volatile void *p, void *res, int size)
{
- switch (size) {
- case 1: *(__u8 *)res = *(volatile __u8 *)p; break;
- case 2: *(__u16 *)res = *(volatile __u16 *)p; break;
- case 4: *(__u32 *)res = *(volatile __u32 *)p; break;
- case 8: *(__u64 *)res = *(volatile __u64 *)p; break;
- default:
- barrier();
- __builtin_memcpy((void *)res, (const void *)p, size);
- barrier();
- }
+ __READ_ONCE_SIZE;
+}
+
+#ifdef CONFIG_KASAN
+/*
+ * This function is not 'inline' because __no_sanitize_address confilcts
+ * with inlining. Attempt to inline it may cause a build failure.
+ * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
+ * '__maybe_unused' allows us to avoid defined-but-not-used warnings.
+ */
+static __no_sanitize_address __maybe_unused
+void __read_once_size_nocheck(const volatile void *p, void *res, int size)
+{
+ __READ_ONCE_SIZE;
+}
+#else
+static __always_inline
+void __read_once_size_nocheck(const volatile void *p, void *res, int size)
+{
+ __READ_ONCE_SIZE;
}
+#endif
static __always_inline void __write_once_size(volatile void *p, void *res, int size)
{
* required ordering.
*/
-#define READ_ONCE(x) \
- ({ union { typeof(x) __val; char __c[1]; } __u; __read_once_size(&(x), __u.__c, sizeof(x)); __u.__val; })
+#define __READ_ONCE(x, check) \
+({ \
+ union { typeof(x) __val; char __c[1]; } __u; \
+ if (check) \
+ __read_once_size(&(x), __u.__c, sizeof(x)); \
+ else \
+ __read_once_size_nocheck(&(x), __u.__c, sizeof(x)); \
+ __u.__val; \
+})
+#define READ_ONCE(x) __READ_ONCE(x, 1)
+
+/*
+ * Use READ_ONCE_NOCHECK() instead of READ_ONCE() if you need
+ * to hide memory access from KASAN.
+ */
+#define READ_ONCE_NOCHECK(x) __READ_ONCE(x, 0)
#define WRITE_ONCE(x, val) \
({ \
return ret;
}
-struct page *dma_alloc_from_contiguous(struct device *dev, int count,
+struct page *dma_alloc_from_contiguous(struct device *dev, size_t count,
unsigned int order);
bool dma_release_from_contiguous(struct device *dev, struct page *pages,
int count);
}
static inline
-struct page *dma_alloc_from_contiguous(struct device *dev, int count,
+struct page *dma_alloc_from_contiguous(struct device *dev, size_t count,
unsigned int order)
{
return NULL;
struct list_head *mem_cgroup_cgwb_list(struct mem_cgroup *memcg);
struct wb_domain *mem_cgroup_wb_domain(struct bdi_writeback *wb);
-void mem_cgroup_wb_stats(struct bdi_writeback *wb, unsigned long *pavail,
- unsigned long *pdirty, unsigned long *pwriteback);
+void mem_cgroup_wb_stats(struct bdi_writeback *wb, unsigned long *pfilepages,
+ unsigned long *pheadroom, unsigned long *pdirty,
+ unsigned long *pwriteback);
#else /* CONFIG_CGROUP_WRITEBACK */
}
static inline void mem_cgroup_wb_stats(struct bdi_writeback *wb,
- unsigned long *pavail,
+ unsigned long *pfilepages,
+ unsigned long *pheadroom,
unsigned long *pdirty,
unsigned long *pwriteback)
{
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array),\
- .info = snd_soc_info_volsw, \
+ .info = snd_soc_info_volsw_sx, \
.get = snd_soc_get_volsw_sx,\
.put = snd_soc_put_volsw_sx, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array), \
- .info = snd_soc_info_volsw, \
+ .info = snd_soc_info_volsw_sx, \
.get = snd_soc_get_volsw_sx, \
.put = snd_soc_put_volsw_sx, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
struct snd_ctl_elem_value *ucontrol);
int snd_soc_info_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo);
+int snd_soc_info_volsw_sx(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo);
#define snd_soc_info_bool_ext snd_ctl_boolean_mono_info
int snd_soc_get_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
#define WM8904_MIC_REGS 2
#define WM8904_GPIO_REGS 4
#define WM8904_DRC_REGS 4
-#define WM8904_EQ_REGS 25
+#define WM8904_EQ_REGS 24
/**
* DRC configurations are specified with a label and a set of register
call_usermodehelper_exec_sync(sub_info);
} else {
pid_t pid;
-
+ /*
+ * Use CLONE_PARENT to reparent it to kthreadd; we do not
+ * want to pollute current->children, and we need a parent
+ * that always ignores SIGCHLD to ensure auto-reaping.
+ */
pid = kernel_thread(call_usermodehelper_exec_async, sub_info,
- SIGCHLD);
+ CLONE_PARENT | SIGCHLD);
if (pid < 0) {
sub_info->retval = pid;
umh_complete(sub_info);
if (core_kernel_text(a))
return;
- /* module_text_address is safe here: we're supposed to have reference
- * to module from symbol_get, so it can't go away. */
+ /*
+ * Even though we hold a reference on the module; we still need to
+ * disable preemption in order to safely traverse the data structure.
+ */
+ preempt_disable();
modaddr = __module_text_address(a);
BUG_ON(!modaddr);
module_put(modaddr);
+ preempt_enable();
}
EXPORT_SYMBOL_GPL(symbol_put_addr);
trace_sched_wakeup_new(p);
check_preempt_curr(rq, p, WF_FORK);
#ifdef CONFIG_SMP
- if (p->sched_class->task_woken)
+ if (p->sched_class->task_woken) {
+ /*
+ * Nothing relies on rq->lock after this, so its fine to
+ * drop it.
+ */
+ lockdep_unpin_lock(&rq->lock);
p->sched_class->task_woken(rq, p);
+ lockdep_pin_lock(&rq->lock);
+ }
#endif
task_rq_unlock(rq, p, &flags);
}
alloc_cpumask_var(&non_isolated_cpus, GFP_KERNEL);
alloc_cpumask_var(&fallback_doms, GFP_KERNEL);
- /* nohz_full won't take effect without isolating the cpus. */
- tick_nohz_full_add_cpus_to(cpu_isolated_map);
-
sched_init_numa();
/*
* Queueing this task back might have overloaded rq, check if we need
* to kick someone away.
*/
- if (has_pushable_dl_tasks(rq))
+ if (has_pushable_dl_tasks(rq)) {
+ /*
+ * Nothing relies on rq->lock after this, so its safe to drop
+ * rq->lock.
+ */
+ lockdep_unpin_lock(&rq->lock);
push_dl_task(rq);
+ lockdep_pin_lock(&rq->lock);
+ }
#endif
unlock:
int target = find_later_rq(p);
if (target != -1 &&
- dl_time_before(p->dl.deadline,
- cpu_rq(target)->dl.earliest_dl.curr))
+ (dl_time_before(p->dl.deadline,
+ cpu_rq(target)->dl.earliest_dl.curr) ||
+ (cpu_rq(target)->dl.dl_nr_running == 0)))
cpu = target;
}
rcu_read_unlock();
later_rq = cpu_rq(cpu);
- if (!dl_time_before(task->dl.deadline,
+ if (later_rq->dl.dl_nr_running &&
+ !dl_time_before(task->dl.deadline,
later_rq->dl.earliest_dl.curr)) {
/*
* Target rq has tasks of equal or earlier deadline,
*/
tg_weight = atomic_long_read(&tg->load_avg);
tg_weight -= cfs_rq->tg_load_avg_contrib;
- tg_weight += cfs_rq_load_avg(cfs_rq);
+ tg_weight += cfs_rq->load.weight;
return tg_weight;
}
long tg_weight, load, shares;
tg_weight = calc_tg_weight(tg, cfs_rq);
- load = cfs_rq_load_avg(cfs_rq);
+ load = cfs_rq->load.weight;
shares = (tg->shares * load);
if (tg_weight)
/* Group cfs_rq's load_avg is used for task_h_load and update_cfs_share */
static inline int update_cfs_rq_load_avg(u64 now, struct cfs_rq *cfs_rq)
{
- int decayed;
struct sched_avg *sa = &cfs_rq->avg;
+ int decayed, removed = 0;
if (atomic_long_read(&cfs_rq->removed_load_avg)) {
long r = atomic_long_xchg(&cfs_rq->removed_load_avg, 0);
sa->load_avg = max_t(long, sa->load_avg - r, 0);
sa->load_sum = max_t(s64, sa->load_sum - r * LOAD_AVG_MAX, 0);
+ removed = 1;
}
if (atomic_long_read(&cfs_rq->removed_util_avg)) {
cfs_rq->load_last_update_time_copy = sa->last_update_time;
#endif
- return decayed;
+ return decayed || removed;
}
/* Update task and its cfs_rq load average */
rcu_idle_enter();
trace_cpu_idle_rcuidle(0, smp_processor_id());
local_irq_enable();
+ stop_critical_timings();
while (!tif_need_resched() &&
(cpu_idle_force_poll || tick_check_broadcast_expired()))
cpu_relax();
+ start_critical_timings();
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
rcu_idle_exit();
return 1;
if (!object_is_on_stack(stack))
return;
+ /* Can't do this from NMI context (can cause deadlocks) */
+ if (in_nmi())
+ return;
+
local_irq_save(flags);
arch_spin_lock(&max_stack_lock);
+ /*
+ * RCU may not be watching, make it see us.
+ * The stack trace code uses rcu_sched.
+ */
+ rcu_irq_enter();
+
/* In case another CPU set the tracer_frame on us */
if (unlikely(!frame_size))
this_size -= tracer_frame;
}
out:
+ rcu_irq_exit();
arch_spin_unlock(&max_stack_lock);
local_irq_restore(flags);
}
config FRAME_WARN
int "Warn for stack frames larger than (needs gcc 4.4)"
range 0 8192
+ default 0 if KASAN
default 1024 if !64BIT
default 2048 if 64BIT
help
printk(KERN_NOTICE "FAULT_INJECTION: forcing a failure.\n"
"name %pd, interval %lu, probability %lu, "
"space %d, times %d\n", attr->dname,
- attr->probability, attr->interval,
+ attr->interval, attr->probability,
atomic_read(&attr->space),
atomic_read(&attr->times));
if (attr->verbose > 1)
release_work);
struct backing_dev_info *bdi = wb->bdi;
+ spin_lock_irq(&cgwb_lock);
+ list_del_rcu(&wb->bdi_node);
+ spin_unlock_irq(&cgwb_lock);
+
wb_shutdown(wb);
css_put(wb->memcg_css);
ret = radix_tree_insert(&bdi->cgwb_tree, memcg_css->id, wb);
if (!ret) {
atomic_inc(&bdi->usage_cnt);
+ list_add_tail_rcu(&wb->bdi_node, &bdi->wb_list);
list_add(&wb->memcg_node, memcg_cgwb_list);
list_add(&wb->blkcg_node, blkcg_cgwb_list);
css_get(memcg_css);
static void cgwb_bdi_destroy(struct backing_dev_info *bdi)
{
struct radix_tree_iter iter;
- struct bdi_writeback_congested *congested, *congested_n;
+ struct rb_node *rbn;
void **slot;
WARN_ON(test_bit(WB_registered, &bdi->wb.state));
radix_tree_for_each_slot(slot, &bdi->cgwb_tree, &iter, 0)
cgwb_kill(*slot);
- rbtree_postorder_for_each_entry_safe(congested, congested_n,
- &bdi->cgwb_congested_tree, rb_node) {
- rb_erase(&congested->rb_node, &bdi->cgwb_congested_tree);
+ while ((rbn = rb_first(&bdi->cgwb_congested_tree))) {
+ struct bdi_writeback_congested *congested =
+ rb_entry(rbn, struct bdi_writeback_congested, rb_node);
+
+ rb_erase(rbn, &bdi->cgwb_congested_tree);
congested->bdi = NULL; /* mark @congested unlinked */
}
int bdi_init(struct backing_dev_info *bdi)
{
+ int ret;
+
bdi->dev = NULL;
bdi->min_ratio = 0;
bdi->max_ratio = 100;
bdi->max_prop_frac = FPROP_FRAC_BASE;
INIT_LIST_HEAD(&bdi->bdi_list);
+ INIT_LIST_HEAD(&bdi->wb_list);
init_waitqueue_head(&bdi->wb_waitq);
- return cgwb_bdi_init(bdi);
+ ret = cgwb_bdi_init(bdi);
+
+ list_add_tail_rcu(&bdi->wb.bdi_node, &bdi->wb_list);
+
+ return ret;
}
EXPORT_SYMBOL(bdi_init);
synchronize_rcu_expedited();
}
-void bdi_destroy(struct backing_dev_info *bdi)
+void bdi_unregister(struct backing_dev_info *bdi)
{
/* make sure nobody finds us on the bdi_list anymore */
bdi_remove_from_list(bdi);
device_unregister(bdi->dev);
bdi->dev = NULL;
}
+}
+void bdi_exit(struct backing_dev_info *bdi)
+{
+ WARN_ON_ONCE(bdi->dev);
wb_exit(&bdi->wb);
}
+
+void bdi_destroy(struct backing_dev_info *bdi)
+{
+ bdi_unregister(bdi);
+ bdi_exit(bdi);
+}
EXPORT_SYMBOL(bdi_destroy);
/*
* This function allocates part of contiguous memory on specific
* contiguous memory area.
*/
-struct page *cma_alloc(struct cma *cma, unsigned int count, unsigned int align)
+struct page *cma_alloc(struct cma *cma, size_t count, unsigned int align)
{
unsigned long mask, offset, pfn, start = 0;
unsigned long bitmap_maxno, bitmap_no, bitmap_count;
if (!cma || !cma->count)
return NULL;
- pr_debug("%s(cma %p, count %d, align %d)\n", __func__, (void *)cma,
+ pr_debug("%s(cma %p, count %zu, align %d)\n", __func__, (void *)cma,
count, align);
if (!count)
break;
}
+ if (fatal_signal_pending(current)) {
+ status = -EINTR;
+ break;
+ }
+
status = a_ops->write_begin(file, mapping, pos, bytes, flags,
&page, &fsdata);
if (unlikely(status < 0))
written += copied;
balance_dirty_pages_ratelimited(mapping);
- if (fatal_signal_pending(current)) {
- status = -EINTR;
- break;
- }
} while (iov_iter_count(i));
return written ? written : status;
for (_pte = pte; _pte < pte+HPAGE_PMD_NR;
_pte++, address += PAGE_SIZE) {
pte_t pteval = *_pte;
- if (pte_none(pteval) || is_zero_pfn(pte_pfn(pteval))) {
+ if (pte_none(pteval) || (pte_present(pteval) &&
+ is_zero_pfn(pte_pfn(pteval)))) {
if (!userfaultfd_armed(vma) &&
++none_or_zero <= khugepaged_max_ptes_none)
continue;
/**
* mem_cgroup_wb_stats - retrieve writeback related stats from its memcg
* @wb: bdi_writeback in question
- * @pavail: out parameter for number of available pages
+ * @pfilepages: out parameter for number of file pages
+ * @pheadroom: out parameter for number of allocatable pages according to memcg
* @pdirty: out parameter for number of dirty pages
* @pwriteback: out parameter for number of pages under writeback
*
- * Determine the numbers of available, dirty, and writeback pages in @wb's
- * memcg. Dirty and writeback are self-explanatory. Available is a bit
- * more involved.
+ * Determine the numbers of file, headroom, dirty, and writeback pages in
+ * @wb's memcg. File, dirty and writeback are self-explanatory. Headroom
+ * is a bit more involved.
*
- * A memcg's headroom is "min(max, high) - used". The available memory is
- * calculated as the lowest headroom of itself and the ancestors plus the
- * number of pages already being used for file pages. Note that this
- * doesn't consider the actual amount of available memory in the system.
- * The caller should further cap *@pavail accordingly.
+ * A memcg's headroom is "min(max, high) - used". In the hierarchy, the
+ * headroom is calculated as the lowest headroom of itself and the
+ * ancestors. Note that this doesn't consider the actual amount of
+ * available memory in the system. The caller should further cap
+ * *@pheadroom accordingly.
*/
-void mem_cgroup_wb_stats(struct bdi_writeback *wb, unsigned long *pavail,
- unsigned long *pdirty, unsigned long *pwriteback)
+void mem_cgroup_wb_stats(struct bdi_writeback *wb, unsigned long *pfilepages,
+ unsigned long *pheadroom, unsigned long *pdirty,
+ unsigned long *pwriteback)
{
struct mem_cgroup *memcg = mem_cgroup_from_css(wb->memcg_css);
struct mem_cgroup *parent;
- unsigned long head_room = PAGE_COUNTER_MAX;
- unsigned long file_pages;
*pdirty = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_DIRTY);
/* this should eventually include NR_UNSTABLE_NFS */
*pwriteback = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_WRITEBACK);
+ *pfilepages = mem_cgroup_nr_lru_pages(memcg, (1 << LRU_INACTIVE_FILE) |
+ (1 << LRU_ACTIVE_FILE));
+ *pheadroom = PAGE_COUNTER_MAX;
- file_pages = mem_cgroup_nr_lru_pages(memcg, (1 << LRU_INACTIVE_FILE) |
- (1 << LRU_ACTIVE_FILE));
while ((parent = parent_mem_cgroup(memcg))) {
unsigned long ceiling = min(memcg->memory.limit, memcg->high);
unsigned long used = page_counter_read(&memcg->memory);
- head_room = min(head_room, ceiling - min(ceiling, used));
+ *pheadroom = min(*pheadroom, ceiling - min(ceiling, used));
memcg = parent;
}
-
- *pavail = file_pages + head_room;
}
#else /* CONFIG_CGROUP_WRITEBACK */
unsigned long pos_ratio;
};
-#define DTC_INIT_COMMON(__wb) .wb = (__wb), \
- .wb_completions = &(__wb)->completions
-
/*
* Length of period for aging writeout fractions of bdis. This is an
* arbitrarily chosen number. The longer the period, the slower fractions will
#ifdef CONFIG_CGROUP_WRITEBACK
-#define GDTC_INIT(__wb) .dom = &global_wb_domain, \
- DTC_INIT_COMMON(__wb)
+#define GDTC_INIT(__wb) .wb = (__wb), \
+ .dom = &global_wb_domain, \
+ .wb_completions = &(__wb)->completions
+
#define GDTC_INIT_NO_WB .dom = &global_wb_domain
-#define MDTC_INIT(__wb, __gdtc) .dom = mem_cgroup_wb_domain(__wb), \
- .gdtc = __gdtc, \
- DTC_INIT_COMMON(__wb)
+
+#define MDTC_INIT(__wb, __gdtc) .wb = (__wb), \
+ .dom = mem_cgroup_wb_domain(__wb), \
+ .wb_completions = &(__wb)->memcg_completions, \
+ .gdtc = __gdtc
static bool mdtc_valid(struct dirty_throttle_control *dtc)
{
#else /* CONFIG_CGROUP_WRITEBACK */
-#define GDTC_INIT(__wb) DTC_INIT_COMMON(__wb)
+#define GDTC_INIT(__wb) .wb = (__wb), \
+ .wb_completions = &(__wb)->completions
#define GDTC_INIT_NO_WB
#define MDTC_INIT(__wb, __gdtc)
return max(thresh, dom->dirty_limit);
}
-/* memory available to a memcg domain is capped by system-wide clean memory */
-static void mdtc_cap_avail(struct dirty_throttle_control *mdtc)
+/*
+ * Memory which can be further allocated to a memcg domain is capped by
+ * system-wide clean memory excluding the amount being used in the domain.
+ */
+static void mdtc_calc_avail(struct dirty_throttle_control *mdtc,
+ unsigned long filepages, unsigned long headroom)
{
struct dirty_throttle_control *gdtc = mdtc_gdtc(mdtc);
- unsigned long clean = gdtc->avail - min(gdtc->avail, gdtc->dirty);
+ unsigned long clean = filepages - min(filepages, mdtc->dirty);
+ unsigned long global_clean = gdtc->avail - min(gdtc->avail, gdtc->dirty);
+ unsigned long other_clean = global_clean - min(global_clean, clean);
- mdtc->avail = min(mdtc->avail, clean);
+ mdtc->avail = filepages + min(headroom, other_clean);
}
/**
}
if (mdtc) {
- unsigned long writeback;
+ unsigned long filepages, headroom, writeback;
/*
* If @wb belongs to !root memcg, repeat the same
* basic calculations for the memcg domain.
*/
- mem_cgroup_wb_stats(wb, &mdtc->avail, &mdtc->dirty,
- &writeback);
- mdtc_cap_avail(mdtc);
+ mem_cgroup_wb_stats(wb, &filepages, &headroom,
+ &mdtc->dirty, &writeback);
mdtc->dirty += writeback;
+ mdtc_calc_avail(mdtc, filepages, headroom);
domain_dirty_limits(mdtc);
return true;
if (mdtc) {
- unsigned long writeback;
+ unsigned long filepages, headroom, writeback;
- mem_cgroup_wb_stats(wb, &mdtc->avail, &mdtc->dirty, &writeback);
- mdtc_cap_avail(mdtc);
+ mem_cgroup_wb_stats(wb, &filepages, &headroom, &mdtc->dirty,
+ &writeback);
+ mdtc_calc_avail(mdtc, filepages, headroom);
domain_dirty_limits(mdtc); /* ditto, ignore writeback */
if (mdtc->dirty > mdtc->bg_thresh)
int nr_pages = global_page_state(NR_FILE_DIRTY) +
global_page_state(NR_UNSTABLE_NFS);
struct bdi_writeback *wb;
- struct wb_iter iter;
/*
* We want to write everything out, not just down to the dirty
if (!bdi_has_dirty_io(&q->backing_dev_info))
return;
- bdi_for_each_wb(wb, &q->backing_dev_info, &iter, 0)
+ rcu_read_lock();
+ list_for_each_entry_rcu(wb, &q->backing_dev_info.wb_list, bdi_node)
if (wb_has_dirty_io(wb))
wb_start_writeback(wb, nr_pages, true,
WB_REASON_LAPTOP_TIMER);
+ rcu_read_unlock();
}
/*
kdebug("- %u", key->serial);
key_check(key);
- /* Throw away the key data */
- if (key->type->destroy)
+ /* Throw away the key data if the key is instantiated */
+ if (test_bit(KEY_FLAG_INSTANTIATED, &key->flags) &&
+ !test_bit(KEY_FLAG_NEGATIVE, &key->flags) &&
+ key->type->destroy)
key->type->destroy(key);
security_key_free(key);
kenter("");
+ if (ctx->index_key.type == &key_type_keyring)
+ return ERR_PTR(-EPERM);
+
user = key_user_lookup(current_fsuid());
if (!user)
return ERR_PTR(-ENOMEM);
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/io.h>
#include <sound/hdaudio_ext.h>
MODULE_DESCRIPTION("HDA extended core");
int dev, err;
err = snd_hda_codec_parse_pcms(codec);
- if (err < 0) {
- snd_hda_codec_reset(codec);
+ if (err < 0)
return err;
- }
/* attach a new PCM streams */
list_for_each_entry(cpcm, &codec->pcm_list_head, list) {
SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo IdeaPad Z560", CXT_FIXUP_MUTE_LED_EAPD),
+ SND_PCI_QUIRK(0x17aa, 0x390b, "Lenovo G50-80", CXT_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC),
};
static struct reg_default rt298_index_def[] = {
- { 0x01, 0xaaaa },
- { 0x02, 0x8aaa },
+ { 0x01, 0xa5a8 },
+ { 0x02, 0x8e95 },
{ 0x03, 0x0002 },
- { 0x04, 0xaf01 },
- { 0x08, 0x000d },
- { 0x09, 0xd810 },
- { 0x0a, 0x0120 },
+ { 0x04, 0xaf67 },
+ { 0x08, 0x200f },
+ { 0x09, 0xd010 },
+ { 0x0a, 0x0100 },
{ 0x0b, 0x0000 },
{ 0x0d, 0x2800 },
- { 0x0f, 0x0000 },
- { 0x19, 0x0a17 },
+ { 0x0f, 0x0022 },
+ { 0x19, 0x0217 },
{ 0x20, 0x0020 },
{ 0x33, 0x0208 },
{ 0x46, 0x0300 },
- { 0x49, 0x0004 },
- { 0x4f, 0x50e9 },
- { 0x50, 0x2000 },
- { 0x63, 0x2902 },
+ { 0x49, 0x4004 },
+ { 0x4f, 0x50c9 },
+ { 0x50, 0x3000 },
+ { 0x63, 0x1b02 },
{ 0x67, 0x1111 },
{ 0x68, 0x1016 },
{ 0x69, 0x273f },
mdelay(10);
if (!rt298->pdata.gpio2_en)
- regmap_write(rt298->regmap, RT298_SET_DMIC2_DEFAULT, 0x4000);
+ regmap_write(rt298->regmap, RT298_SET_DMIC2_DEFAULT, 0x40);
else
regmap_write(rt298->regmap, RT298_SET_DMIC2_DEFAULT, 0);
wm8962_reset(wm8962);
+ regcache_mark_dirty(wm8962->regmap);
+
/* SYSCLK defaults to on; make sure it is off so we can safely
* write to registers if the device is declocked.
*/
}
EXPORT_SYMBOL_GPL(snd_soc_info_volsw);
+/**
+ * snd_soc_info_volsw_sx - Mixer info callback for SX TLV controls
+ * @kcontrol: mixer control
+ * @uinfo: control element information
+ *
+ * Callback to provide information about a single mixer control, or a double
+ * mixer control that spans 2 registers of the SX TLV type. SX TLV controls
+ * have a range that represents both positive and negative values either side
+ * of zero but without a sign bit.
+ *
+ * Returns 0 for success.
+ */
+int snd_soc_info_volsw_sx(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+
+ snd_soc_info_volsw(kcontrol, uinfo);
+ /* Max represents the number of levels in an SX control not the
+ * maximum value, so add the minimum value back on
+ */
+ uinfo->value.integer.max += mc->min;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_info_volsw_sx);
+
/**
* snd_soc_get_volsw - single mixer get callback
* @kcontrol: mixer control
void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu)
{
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
+ bool phys_active;
+ int ret;
/*
* We're about to run this vcpu again, so there is no need to
*/
if (kvm_timer_should_fire(vcpu))
kvm_timer_inject_irq(vcpu);
+
+ /*
+ * We keep track of whether the edge-triggered interrupt has been
+ * signalled to the vgic/guest, and if so, we mask the interrupt and
+ * the physical distributor to prevent the timer from raising a
+ * physical interrupt whenever we run a guest, preventing forward
+ * VCPU progress.
+ */
+ if (kvm_vgic_get_phys_irq_active(timer->map))
+ phys_active = true;
+ else
+ phys_active = false;
+
+ ret = irq_set_irqchip_state(timer->map->irq,
+ IRQCHIP_STATE_ACTIVE,
+ phys_active);
+ WARN_ON(ret);
}
/**
return false;
}
+/*
+ * If a mapped interrupt's state has been modified by the guest such that it
+ * is no longer active or pending, without it have gone through the sync path,
+ * then the map->active field must be cleared so the interrupt can be taken
+ * again.
+ */
+static void vgic_handle_clear_mapped_irq(struct kvm_vcpu *vcpu)
+{
+ struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+ struct list_head *root;
+ struct irq_phys_map_entry *entry;
+ struct irq_phys_map *map;
+
+ rcu_read_lock();
+
+ /* Check for PPIs */
+ root = &vgic_cpu->irq_phys_map_list;
+ list_for_each_entry_rcu(entry, root, entry) {
+ map = &entry->map;
+
+ if (!vgic_dist_irq_is_pending(vcpu, map->virt_irq) &&
+ !vgic_irq_is_active(vcpu, map->virt_irq))
+ map->active = false;
+ }
+
+ rcu_read_unlock();
+}
+
bool vgic_handle_clear_pending_reg(struct kvm *kvm,
struct kvm_exit_mmio *mmio,
phys_addr_t offset, int vcpu_id)
vcpu_id, offset);
vgic_reg_access(mmio, reg, offset, mode);
+ vgic_handle_clear_mapped_irq(kvm_get_vcpu(kvm, vcpu_id));
vgic_update_state(kvm);
return true;
}
ACCESS_READ_VALUE | ACCESS_WRITE_CLEARBIT);
if (mmio->is_write) {
+ vgic_handle_clear_mapped_irq(kvm_get_vcpu(kvm, vcpu_id));
vgic_update_state(kvm);
return true;
}
pend_percpu = vcpu->arch.vgic_cpu.pending_percpu;
pend_shared = vcpu->arch.vgic_cpu.pending_shared;
+ if (!dist->enabled) {
+ bitmap_zero(pend_percpu, VGIC_NR_PRIVATE_IRQS);
+ bitmap_zero(pend_shared, nr_shared);
+ return 0;
+ }
+
pending = vgic_bitmap_get_cpu_map(&dist->irq_pending, vcpu_id);
enabled = vgic_bitmap_get_cpu_map(&dist->irq_enabled, vcpu_id);
bitmap_and(pend_percpu, pending, enabled, VGIC_NR_PRIVATE_IRQS);
struct kvm_vcpu *vcpu;
int c;
- if (!dist->enabled) {
- set_bit(0, dist->irq_pending_on_cpu);
- return;
- }
-
kvm_for_each_vcpu(c, vcpu, kvm) {
if (compute_pending_for_cpu(vcpu))
set_bit(c, dist->irq_pending_on_cpu);
struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
struct vgic_lr vlr = vgic_get_lr(vcpu, lr_nr);
+ /*
+ * We must transfer the pending state back to the distributor before
+ * retiring the LR, otherwise we may loose edge-triggered interrupts.
+ */
+ if (vlr.state & LR_STATE_PENDING) {
+ vgic_dist_irq_set_pending(vcpu, irq);
+ vlr.hwirq = 0;
+ }
+
vlr.state = 0;
vgic_set_lr(vcpu, lr_nr, vlr);
clear_bit(lr_nr, vgic_cpu->lr_used);
kvm_debug("Set active, clear distributor: 0x%x\n", vlr.state);
vgic_irq_clear_active(vcpu, irq);
vgic_update_state(vcpu->kvm);
- } else if (vgic_dist_irq_is_pending(vcpu, irq)) {
+ } else {
+ WARN_ON(!vgic_dist_irq_is_pending(vcpu, irq));
vlr.state |= LR_STATE_PENDING;
kvm_debug("Set pending: 0x%x\n", vlr.state);
}
struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
unsigned long *pa_percpu, *pa_shared;
- int i, vcpu_id, lr, ret;
+ int i, vcpu_id;
int overflow = 0;
int nr_shared = vgic_nr_shared_irqs(dist);
*/
clear_bit(vcpu_id, dist->irq_pending_on_cpu);
}
-
- for (lr = 0; lr < vgic->nr_lr; lr++) {
- struct vgic_lr vlr;
-
- if (!test_bit(lr, vgic_cpu->lr_used))
- continue;
-
- vlr = vgic_get_lr(vcpu, lr);
-
- /*
- * If we have a mapping, and the virtual interrupt is
- * presented to the guest (as pending or active), then we must
- * set the state to active in the physical world. See
- * Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt.
- */
- if (vlr.state & LR_HW) {
- struct irq_phys_map *map;
- map = vgic_irq_map_search(vcpu, vlr.irq);
-
- ret = irq_set_irqchip_state(map->irq,
- IRQCHIP_STATE_ACTIVE,
- true);
- WARN_ON(ret);
- }
- }
}
static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
return 0;
map = vgic_irq_map_search(vcpu, vlr.irq);
- BUG_ON(!map || !map->active);
+ BUG_ON(!map);
ret = irq_get_irqchip_state(map->irq,
IRQCHIP_STATE_ACTIVE,
WARN_ON(ret);
- if (map->active) {
- ret = irq_set_irqchip_state(map->irq,
- IRQCHIP_STATE_ACTIVE,
- false);
- WARN_ON(ret);
+ if (map->active)
return 0;
- }
return 1;
}
} else {
if (level_triggered) {
vgic_dist_irq_clear_level(vcpu, irq_num);
- if (!vgic_dist_irq_soft_pend(vcpu, irq_num))
+ if (!vgic_dist_irq_soft_pend(vcpu, irq_num)) {
vgic_dist_irq_clear_pending(vcpu, irq_num);
+ vgic_cpu_irq_clear(vcpu, irq_num);
+ if (!compute_pending_for_cpu(vcpu))
+ clear_bit(cpuid, dist->irq_pending_on_cpu);
+ }
}
ret = false;
projects / karo-tx-linux.git / commitdiff