James Bottomley <jejb@titanic.il.steeleye.com>
James E Wilson <wilson@specifix.com>
James Ketrenos <jketreno@io.(none)>
+<javier@osg.samsung.com> <javier.martinez@collabora.co.uk>
Jean Tourrilhes <jt@hpl.hp.com>
Jeff Garzik <jgarzik@pretzel.yyz.us>
Jens Axboe <axboe@suse.de>
--- /dev/null
+This file contains documentation for running mainline
+kernel on omaps.
+
+KERNEL NEW DEPENDENCIES
+v4.3+ Update is needed for custom .config files to make sure
+ CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work
+ properly.
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-ARM/Allwinner A1X SoC support
+ARM/Allwinner sunXi SoC support
M: Maxime Ripard <maxime.ripard@free-electrons.com>
+M: Chen-Yu Tsai <wens@csie.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-N: sun[x4567]i
+N: sun[x456789]i
ARM/Allwinner SoC Clock Support
M: Emilio López <emilio@elopez.com.ar>
MELLANOX ETHERNET DRIVER (mlx4_en)
M: Amir Vadai <amirv@mellanox.com>
-M: Ido Shamay <idos@mellanox.com>
L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
ZSMALLOC COMPRESSED SLAB MEMORY ALLOCATOR
M: Minchan Kim <minchan@kernel.org>
M: Nitin Gupta <ngupta@vflare.org>
+R: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
L: linux-mm@kvack.org
S: Maintained
F: mm/zsmalloc.c
VERSION = 4
PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
NAME = Blurry Fish Butt
# *DOCUMENTATION*
/* SMPS9 unused */
ldo1_reg: ldo1 {
- /* VDD_SD */
+ /* VDD_SD / VDDSHV8 */
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
+ regulator-always-on;
};
ldo2_reg: ldo2 {
/ {
model = "Marvell Armada 385 Access Point Development Board";
- compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+ compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
chosen {
stdout-path = "serial1:115200n8";
};
usb_phy2: phy@a2f400 {
- compatible = "marvell,berlin2-usb-phy";
+ compatible = "marvell,berlin2cd-usb-phy";
reg = <0xa2f400 0x128>;
#phy-cells = <0>;
resets = <&chip_rst 0x104 14>;
};
usb_phy0: phy@b74000 {
- compatible = "marvell,berlin2-usb-phy";
+ compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb74000 0x128>;
#phy-cells = <0>;
resets = <&chip_rst 0x104 12>;
};
usb_phy1: phy@b78000 {
- compatible = "marvell,berlin2-usb-phy";
+ compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb78000 0x128>;
#phy-cells = <0>;
resets = <&chip_rst 0x104 13>;
};
};
+&pmu_system_controller {
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
};
};
+&pmu_system_controller {
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
status = "disabled";
};
- uart2: serial@30870000 {
+ uart2: serial@30890000 {
compatible = "fsl,imx7d-uart",
"fsl,imx6q-uart";
- reg = <0x30870000 0x10000>;
+ reg = <0x30890000 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_UART2_ROOT_CLK>,
<&clks IMX7D_UART2_ROOT_CLK>;
/ {
model = "LogicPD Zoom DM3730 Torpedo Development Kit";
- compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx";
+ compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
gpio_keys {
compatible = "gpio-keys";
timer@c1109940 {
compatible = "amlogic,meson6-timer";
- reg = <0xc1109940 0x14>;
+ reg = <0xc1109940 0x18>;
interrupts = <0 10 1>;
};
wdt: watchdog@c1109900 {
compatible = "amlogic,meson6-wdt";
reg = <0xc1109900 0x8>;
+ interrupts = <0 0 1>;
};
uart_AO: serial@c81004c0 {
compatible = "amlogic,meson-uart";
- reg = <0xc81004c0 0x14>;
+ reg = <0xc81004c0 0x18>;
interrupts = <0 90 1>;
clocks = <&clk81>;
status = "disabled";
};
- uart_A: serial@c81084c0 {
+ uart_A: serial@c11084c0 {
compatible = "amlogic,meson-uart";
- reg = <0xc81084c0 0x14>;
- interrupts = <0 90 1>;
+ reg = <0xc11084c0 0x18>;
+ interrupts = <0 26 1>;
clocks = <&clk81>;
status = "disabled";
};
- uart_B: serial@c81084dc {
+ uart_B: serial@c11084dc {
compatible = "amlogic,meson-uart";
- reg = <0xc81084dc 0x14>;
- interrupts = <0 90 1>;
+ reg = <0xc11084dc 0x18>;
+ interrupts = <0 75 1>;
clocks = <&clk81>;
status = "disabled";
};
- uart_C: serial@c8108700 {
+ uart_C: serial@c1108700 {
compatible = "amlogic,meson-uart";
- reg = <0xc8108700 0x14>;
- interrupts = <0 90 1>;
+ reg = <0xc1108700 0x18>;
+ interrupts = <0 93 1>;
clocks = <&clk81>;
status = "disabled";
};
/ {
model = "TI OMAP37XX EVM (TMDSEVM3730)";
- compatible = "ti,omap3-evm-37xx", "ti,omap36xx";
+ compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
memory {
device_type = "memory";
/* VMMCI level-shifter enable */
default_hrefv60_cfg2 {
pins = "GPIO169_D22";
- ste,config = <&gpio_out_lo>;
+ ste,config = <&gpio_out_hi>;
};
/* VMMCI level-shifter voltage select */
default_hrefv60_cfg3 {
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 246>;
+ */
};
apbmisc@70000800 {
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 251>;
+ */
};
apbdma: dma@0,60020000 {
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 224>;
+ */
};
apbmisc@70000800 {
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 248>;
+ */
};
apbmisc@70000800 {
};
ðsc {
- interrupts = <0 50 4>;
+ interrupts = <0 52 4>;
};
&serial0 {
depends on MMU && OF
select PREEMPT_NOTIFIERS
select ANON_INODES
+ select ARM_GIC
select HAVE_KVM_CPU_RELAX_INTERCEPT
select HAVE_KVM_ARCH_TLB_FLUSH_ALL
select KVM_MMIO
*/
err = kvm_timer_hyp_init();
if (err)
- goto out_free_mappings;
+ goto out_free_context;
#ifndef CONFIG_HOTPLUG_CPU
free_boot_hyp_pgd();
args.args_count = 0;
child_domain = of_genpd_get_from_provider(&args);
if (IS_ERR(child_domain))
- goto next_pd;
+ continue;
if (of_parse_phandle_with_args(np, "power-domains",
"#power-domain-cells", 0, &args) != 0)
- goto next_pd;
+ continue;
parent_domain = of_genpd_get_from_provider(&args);
if (IS_ERR(parent_domain))
- goto next_pd;
+ continue;
if (pm_genpd_add_subdomain(parent_domain, child_domain))
pr_warn("%s failed to add subdomain: %s\n",
else
pr_info("%s has as child subdomain: %s.\n",
parent_domain->name, child_domain->name);
-next_pd:
- of_node_put(np);
}
return 0;
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
+ select ZONE_DMA if ARM_LPAE
config SOC_AM33XX
bool "TI AM33XX"
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
+ select ZONE_DMA if ARM_LPAE
config ARCH_OMAP2PLUS
bool
MACHINE_END
static const char *const omap36xx_boards_compat[] __initconst = {
+ "ti,omap3630",
"ti,omap36xx",
NULL,
};
};
DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = SZ_2G,
+#endif
.reserve = omap_reserve,
.smp = smp_ops(omap4_smp_ops),
.map_io = omap5_map_io,
};
DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = SZ_2G,
+#endif
.reserve = omap_reserve,
.smp = smp_ops(omap4_smp_ops),
.map_io = dra7xx_map_io,
};
DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = SZ_2G,
+#endif
.reserve = omap_reserve,
.map_io = dra7xx_map_io,
.init_early = dra7xx_init_early,
void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
{
- omap_sdrc_init(NULL, NULL);
+ /*
+ * We still need this for omap2420 and omap3 PM to work, others are
+ * using drivers/misc/sram.c already.
+ */
+ if (of_machine_is_compatible("ti,omap2420") ||
+ of_machine_is_compatible("ti,omap3"))
+ omap_sdrc_init(NULL, NULL);
+
pdata_quirks_check(auxdata_quirks);
of_platform_populate(NULL, omap_dt_match_table,
omap_auxdata_lookup, NULL);
#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
-#ifdef CONFIG_PM
-
-#define ISRAM_START 0x5c000000
-#define ISRAM_SIZE SZ_256K
/*
* NAND NFC: DFI bus arbitration subset
#define NDCR_ND_ARB_EN (1 << 12)
#define NDCR_ND_ARB_CNTL (1 << 19)
+#ifdef CONFIG_PM
+
+#define ISRAM_START 0x5c000000
+#define ISRAM_SIZE SZ_256K
+
static void __iomem *sram;
static unsigned long wakeup_src;
case BPF_LD | BPF_B | BPF_IND:
load_order = 0;
load_ind:
+ update_on_xread(ctx);
OP_IMM3(ARM_ADD, r_off, r_X, k, ctx);
goto load_common;
case BPF_LDX | BPF_IMM:
d->netdev = &orion_ge00.dev;
for (i = 0; i < d->nr_chips; i++)
- d->chip[i].host_dev = &orion_ge00_shared.dev;
+ d->chip[i].host_dev = &orion_ge_mvmdio.dev;
orion_switch_device.dev.platform_data = d;
platform_device_register(&orion_switch_device);
#ifdef __KERNEL__
-#include <asm/reg.h>
/* bytes per L1 cache line */
#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
};
extern struct ppc64_caches ppc64_caches;
-
-static inline void logmpp(u64 x)
-{
- asm volatile(PPC_LOGMPP(R1) : : "r" (x));
-}
-
#endif /* __powerpc64__ && ! __ASSEMBLY__ */
#if defined(__ASSEMBLY__)
u32 arch_compat;
ulong pcr;
ulong dpdes; /* doorbell state (POWER8) */
- void *mpp_buffer; /* Micro Partition Prefetch buffer */
- bool mpp_buffer_is_valid;
ulong conferring_threads;
};
#define PPC_INST_ISEL 0x7c00001e
#define PPC_INST_ISEL_MASK 0xfc00003e
#define PPC_INST_LDARX 0x7c0000a8
-#define PPC_INST_LOGMPP 0x7c0007e4
#define PPC_INST_LSWI 0x7c0004aa
#define PPC_INST_LSWX 0x7c00042a
#define PPC_INST_LWARX 0x7c000028
#define __PPC_EH(eh) 0
#endif
-/* POWER8 Micro Partition Prefetch (MPP) parameters */
-/* Address mask is common for LOGMPP instruction and MPPR SPR */
-#define PPC_MPPE_ADDRESS_MASK 0xffffffffc000ULL
-
-/* Bits 60 and 61 of MPP SPR should be set to one of the following */
-/* Aborting the fetch is indeed setting 00 in the table size bits */
-#define PPC_MPPR_FETCH_ABORT (0x0ULL << 60)
-#define PPC_MPPR_FETCH_WHOLE_TABLE (0x2ULL << 60)
-
-/* Bits 54 and 55 of register for LOGMPP instruction should be set to: */
-#define PPC_LOGMPP_LOG_L2 (0x02ULL << 54)
-#define PPC_LOGMPP_LOG_L2L3 (0x01ULL << 54)
-#define PPC_LOGMPP_LOG_ABORT (0x03ULL << 54)
-
/* Deal with instructions that older assemblers aren't aware of */
#define PPC_DCBAL(a, b) stringify_in_c(.long PPC_INST_DCBAL | \
__PPC_RA(a) | __PPC_RB(b))
#define PPC_LDARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LDARX | \
___PPC_RT(t) | ___PPC_RA(a) | \
___PPC_RB(b) | __PPC_EH(eh))
-#define PPC_LOGMPP(b) stringify_in_c(.long PPC_INST_LOGMPP | \
- __PPC_RB(b))
#define PPC_LWARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LWARX | \
___PPC_RT(t) | ___PPC_RA(a) | \
___PPC_RB(b) | __PPC_EH(eh))
#define CTRL_TE 0x00c00000 /* thread enable */
#define CTRL_RUNLATCH 0x1
#define SPRN_DAWR 0xB4
-#define SPRN_MPPR 0xB8 /* Micro Partition Prefetch Register */
#define SPRN_RPR 0xBA /* Relative Priority Register */
#define SPRN_CIABR 0xBB
#define CIABR_PRIV 0x3
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ if (!rtas.entry)
+ return -EINVAL;
+
if (copy_from_user(&args, uargs, 3 * sizeof(u32)) != 0)
return -EFAULT;
#include <asm/reg.h>
#include <asm/cputable.h>
-#include <asm/cache.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/uaccess.h>
static DECLARE_BITMAP(default_enabled_hcalls, MAX_HCALL_OPCODE/4 + 1);
-#if defined(CONFIG_PPC_64K_PAGES)
-#define MPP_BUFFER_ORDER 0
-#elif defined(CONFIG_PPC_4K_PAGES)
-#define MPP_BUFFER_ORDER 3
-#endif
-
static int dynamic_mt_modes = 6;
module_param(dynamic_mt_modes, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(dynamic_mt_modes, "Set of allowed dynamic micro-threading modes: 0 (= none), 2, 4, or 6 (= 2 or 4)");
vcore->kvm = kvm;
INIT_LIST_HEAD(&vcore->preempt_list);
- vcore->mpp_buffer_is_valid = false;
-
- if (cpu_has_feature(CPU_FTR_ARCH_207S))
- vcore->mpp_buffer = (void *)__get_free_pages(
- GFP_KERNEL|__GFP_ZERO,
- MPP_BUFFER_ORDER);
-
return vcore;
}
return 1;
}
-static void kvmppc_start_saving_l2_cache(struct kvmppc_vcore *vc)
-{
- phys_addr_t phy_addr, mpp_addr;
-
- phy_addr = (phys_addr_t)virt_to_phys(vc->mpp_buffer);
- mpp_addr = phy_addr & PPC_MPPE_ADDRESS_MASK;
-
- mtspr(SPRN_MPPR, mpp_addr | PPC_MPPR_FETCH_ABORT);
- logmpp(mpp_addr | PPC_LOGMPP_LOG_L2);
-
- vc->mpp_buffer_is_valid = true;
-}
-
-static void kvmppc_start_restoring_l2_cache(const struct kvmppc_vcore *vc)
-{
- phys_addr_t phy_addr, mpp_addr;
-
- phy_addr = virt_to_phys(vc->mpp_buffer);
- mpp_addr = phy_addr & PPC_MPPE_ADDRESS_MASK;
-
- /* We must abort any in-progress save operations to ensure
- * the table is valid so that prefetch engine knows when to
- * stop prefetching. */
- logmpp(mpp_addr | PPC_LOGMPP_LOG_ABORT);
- mtspr(SPRN_MPPR, mpp_addr | PPC_MPPR_FETCH_WHOLE_TABLE);
-}
-
/*
* A list of virtual cores for each physical CPU.
* These are vcores that could run but their runner VCPU tasks are
srcu_idx = srcu_read_lock(&vc->kvm->srcu);
- if (vc->mpp_buffer_is_valid)
- kvmppc_start_restoring_l2_cache(vc);
-
__kvmppc_vcore_entry();
- if (vc->mpp_buffer)
- kvmppc_start_saving_l2_cache(vc);
-
srcu_read_unlock(&vc->kvm->srcu, srcu_idx);
spin_lock(&vc->lock);
{
long int i;
- for (i = 0; i < KVM_MAX_VCORES; ++i) {
- if (kvm->arch.vcores[i] && kvm->arch.vcores[i]->mpp_buffer) {
- struct kvmppc_vcore *vc = kvm->arch.vcores[i];
- free_pages((unsigned long)vc->mpp_buffer,
- MPP_BUFFER_ORDER);
- }
+ for (i = 0; i < KVM_MAX_VCORES; ++i)
kfree(kvm->arch.vcores[i]);
- }
kvm->arch.online_vcores = 0;
}
* so clear LPCR:PECE1. We keep PECE2 enabled.
*/
mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
+
+ /*
+ * Hard-disable interrupts, and then clear irq_happened flags
+ * that we can safely ignore while off-line, since they
+ * are for things for which we do no processing when off-line
+ * (or in the case of HMI, all the processing we need to do
+ * is done in lower-level real-mode code).
+ */
+ hard_irq_disable();
+ local_paca->irq_happened &= ~(PACA_IRQ_DEC | PACA_IRQ_HMI);
+
while (!generic_check_cpu_restart(cpu)) {
+ /*
+ * Clear IPI flag, since we don't handle IPIs while
+ * offline, except for those when changing micro-threading
+ * mode, which are handled explicitly below, and those
+ * for coming online, which are handled via
+ * generic_check_cpu_restart() calls.
+ */
+ kvmppc_set_host_ipi(cpu, 0);
ppc64_runlatch_off();
* having finished executing in a KVM guest, then srr1
* contains 0.
*/
- if ((srr1 & wmask) == SRR1_WAKEEE) {
+ if (((srr1 & wmask) == SRR1_WAKEEE) ||
+ (local_paca->irq_happened & PACA_IRQ_EE)) {
icp_native_flush_interrupt();
- local_paca->irq_happened &= PACA_IRQ_HARD_DIS;
- smp_mb();
} else if ((srr1 & wmask) == SRR1_WAKEHDBELL) {
unsigned long msg = PPC_DBELL_TYPE(PPC_DBELL_SERVER);
asm volatile(PPC_MSGCLR(%0) : : "r" (msg));
- kvmppc_set_host_ipi(cpu, 0);
}
+ local_paca->irq_happened &= ~(PACA_IRQ_EE | PACA_IRQ_DBELL);
+ smp_mb();
if (cpu_core_split_required())
continue;
- if (!generic_check_cpu_restart(cpu))
+ if (srr1 && !generic_check_cpu_restart(cpu))
DBG("CPU%d Unexpected exit while offline !\n", cpu);
}
mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1);
USER_CFLAGS = $(patsubst $(KERNEL_DEFINES),,$(patsubst -I%,,$(KBUILD_CFLAGS))) \
$(ARCH_INCLUDE) $(MODE_INCLUDE) $(filter -I%,$(CFLAGS)) \
- -D_FILE_OFFSET_BITS=64 -idirafter include \
- -D__KERNEL__ -D__UM_HOST__
+ -D_FILE_OFFSET_BITS=64 -idirafter $(srctree)/include \
+ -idirafter $(obj)/include -D__KERNEL__ -D__UM_HOST__
#This will adjust *FLAGS accordingly to the platform.
include $(ARCH_DIR)/Makefile-os-$(OS)
show_regs(container_of(regs, struct pt_regs, regs));
panic("Segfault with no mm");
}
- else if (!is_user && address < TASK_SIZE) {
+ else if (!is_user && address > PAGE_SIZE && address < TASK_SIZE) {
show_regs(container_of(regs, struct pt_regs, regs));
panic("Kernel tried to access user memory at addr 0x%lx, ip 0x%lx",
address, ip);
"ret = %d\n", -n);
ret = n;
}
- CATCH_EINTR(waitpid(pid, NULL, __WCLONE));
+ CATCH_EINTR(waitpid(pid, NULL, __WALL));
}
out_free2:
return err;
}
if (stack_out == NULL) {
- CATCH_EINTR(pid = waitpid(pid, &status, __WCLONE));
+ CATCH_EINTR(pid = waitpid(pid, &status, __WALL));
if (pid < 0) {
err = -errno;
printk(UM_KERN_ERR "run_helper_thread - wait failed, "
int helper_wait(int pid)
{
int ret, status;
- int wflags = __WCLONE;
+ int wflags = __WALL;
CATCH_EINTR(ret = waitpid(pid, &status, wflags));
if (ret < 0) {
bool conout_found = false;
void *dummy = NULL;
u32 h = handles[i];
+ u32 current_fb_base;
status = efi_call_early(handle_protocol, h,
proto, (void **)&gop32);
if (status == EFI_SUCCESS)
conout_found = true;
- status = __gop_query32(gop32, &info, &size, &fb_base);
+ status = __gop_query32(gop32, &info, &size, ¤t_fb_base);
if (status == EFI_SUCCESS && (!first_gop || conout_found)) {
/*
* Systems that use the UEFI Console Splitter may
pixel_format = info->pixel_format;
pixel_info = info->pixel_information;
pixels_per_scan_line = info->pixels_per_scan_line;
+ fb_base = current_fb_base;
/*
* Once we've found a GOP supporting ConOut,
bool conout_found = false;
void *dummy = NULL;
u64 h = handles[i];
+ u32 current_fb_base;
status = efi_call_early(handle_protocol, h,
proto, (void **)&gop64);
if (status == EFI_SUCCESS)
conout_found = true;
- status = __gop_query64(gop64, &info, &size, &fb_base);
+ status = __gop_query64(gop64, &info, &size, ¤t_fb_base);
if (status == EFI_SUCCESS && (!first_gop || conout_found)) {
/*
* Systems that use the UEFI Console Splitter may
pixel_format = info->pixel_format;
pixel_info = info->pixel_information;
pixels_per_scan_line = info->pixels_per_scan_line;
+ fb_base = current_fb_base;
/*
* Once we've found a GOP supporting ConOut,
function. */
#define __HAVE_ARCH_MEMCPY 1
+extern void *memcpy(void *to, const void *from, size_t len);
extern void *__memcpy(void *to, const void *from, size_t len);
#ifndef CONFIG_KMEMCHECK
-#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
-extern void *memcpy(void *to, const void *from, size_t len);
-#else
+#if (__GNUC__ == 4 && __GNUC_MINOR__ < 3) || __GNUC__ < 4
#define memcpy(dst, src, len) \
({ \
size_t __len = (len); \
struct irq_data *irq_data;
struct mp_chip_data *data;
struct irq_alloc_info *info = arg;
+ unsigned long flags;
if (!info || nr_irqs > 1)
return -EINVAL;
cfg = irqd_cfg(irq_data);
add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin);
+
+ local_irq_save(flags);
if (info->ioapic_entry)
mp_setup_entry(cfg, data, info->ioapic_entry);
mp_register_handler(virq, data->trigger);
if (virq < nr_legacy_irqs())
legacy_pic->mask(virq);
+ local_irq_restore(flags);
apic_printk(APIC_VERBOSE, KERN_DEBUG
"IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i Dest:%d)\n",
if (sp < bottom || sp > top)
return 0;
- fp = READ_ONCE(*(unsigned long *)sp);
+ fp = READ_ONCE_NOCHECK(*(unsigned long *)sp);
do {
if (fp < bottom || fp > top)
return 0;
- ip = READ_ONCE(*(unsigned long *)(fp + sizeof(unsigned long)));
+ ip = READ_ONCE_NOCHECK(*(unsigned long *)(fp + sizeof(unsigned long)));
if (!in_sched_functions(ip))
return ip;
- fp = READ_ONCE(*(unsigned long *)fp);
+ fp = READ_ONCE_NOCHECK(*(unsigned long *)fp);
} while (count++ < 16 && p->state != TASK_RUNNING);
return 0;
}
clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY,
swapper_pg_dir + KERNEL_PGD_BOUNDARY,
KERNEL_PGD_PTRS);
+
+ /*
+ * sync back low identity map too. It is used for example
+ * in the 32-bit EFI stub.
+ */
+ clone_pgd_range(initial_page_table,
+ swapper_pg_dir + KERNEL_PGD_BOUNDARY,
+ KERNEL_PGD_PTRS);
#endif
tboot_probe();
*/
#define UDELAY_10MS_DEFAULT 10000
-static unsigned int init_udelay = UDELAY_10MS_DEFAULT;
+static unsigned int init_udelay = INT_MAX;
static int __init cpu_init_udelay(char *str)
{
static void __init smp_quirk_init_udelay(void)
{
/* if cmdline changed it from default, leave it alone */
- if (init_udelay != UDELAY_10MS_DEFAULT)
+ if (init_udelay != INT_MAX)
return;
/* if modern processor, use no delay */
if (((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 6)) ||
((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && (boot_cpu_data.x86 >= 0xF)))
init_udelay = 0;
+
+ /* else, use legacy delay */
+ init_udelay = UDELAY_10MS_DEFAULT;
}
/*
/*
* Give the other CPU some time to accept the IPI.
*/
- if (init_udelay)
+ if (init_udelay == 0)
+ udelay(10);
+ else
udelay(300);
pr_debug("Startup point 1\n");
/*
* Give the other CPU some time to accept the IPI.
*/
- if (init_udelay)
+ if (init_udelay == 0)
+ udelay(10);
+ else
udelay(200);
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
#include <skas.h>
#include <sysdep/tls.h>
-extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
+static inline int modify_ldt (int func, void *ptr, unsigned long bytecount)
+{
+ return syscall(__NR_modify_ldt, func, ptr, bytecount);
+}
static long write_ldt_entry(struct mm_id *mm_idp, int func,
struct user_desc *desc, void **addr, int done)
q->queue_lock = &q->__queue_lock;
spin_unlock_irq(lock);
- bdi_destroy(&q->backing_dev_info);
+ bdi_unregister(&q->backing_dev_info);
/* @q is and will stay empty, shutdown and put */
blk_put_queue(q);
{
bt_free(&tags->bitmap_tags);
bt_free(&tags->breserved_tags);
+ free_cpumask_var(tags->cpumask);
kfree(tags);
}
int i;
for (i = 0; i < set->nr_hw_queues; i++) {
- if (set->tags[i]) {
+ if (set->tags[i])
blk_mq_free_rq_map(set, set->tags[i], i);
- free_cpumask_var(set->tags[i]->cpumask);
- }
}
kfree(set->tags);
struct request_queue *q =
container_of(kobj, struct request_queue, kobj);
+ bdi_exit(&q->backing_dev_info);
blkcg_exit_queue(q);
if (q->elevator) {
* global one. Requires architecture specific dev_get_cma_area() helper
* function.
*/
-struct page *dma_alloc_from_contiguous(struct device *dev, int count,
+struct page *dma_alloc_from_contiguous(struct device *dev, size_t count,
unsigned int align)
{
if (align > CONFIG_CMA_ALIGNMENT)
bool disconnect; /* a disconnect has been requested by user */
struct timer_list timeout_timer;
+ spinlock_t tasks_lock;
struct task_struct *task_recv;
struct task_struct *task_send;
static void nbd_xmit_timeout(unsigned long arg)
{
struct nbd_device *nbd = (struct nbd_device *)arg;
- struct task_struct *task;
+ unsigned long flags;
if (list_empty(&nbd->queue_head))
return;
nbd->disconnect = true;
- task = READ_ONCE(nbd->task_recv);
- if (task)
- force_sig(SIGKILL, task);
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
+
+ if (nbd->task_recv)
+ force_sig(SIGKILL, nbd->task_recv);
- task = READ_ONCE(nbd->task_send);
- if (task)
+ if (nbd->task_send)
force_sig(SIGKILL, nbd->task_send);
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
+
dev_err(nbd_to_dev(nbd), "Connection timed out, killed receiver and sender, shutting down connection\n");
}
{
struct request *req;
int ret;
+ unsigned long flags;
BUG_ON(nbd->magic != NBD_MAGIC);
sk_set_memalloc(nbd->sock->sk);
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_recv = current;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
ret = device_create_file(disk_to_dev(nbd->disk), &pid_attr);
if (ret) {
dev_err(disk_to_dev(nbd->disk), "device_create_file failed!\n");
+
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_recv = NULL;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
+
return ret;
}
device_remove_file(disk_to_dev(nbd->disk), &pid_attr);
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_recv = NULL;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
if (signal_pending(current)) {
siginfo_t info;
{
struct nbd_device *nbd = data;
struct request *req;
+ unsigned long flags;
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_send = current;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
set_user_nice(current, MIN_NICE);
while (!kthread_should_stop() || !list_empty(&nbd->waiting_queue)) {
nbd_handle_req(nbd, req);
}
+ spin_lock_irqsave(&nbd->tasks_lock, flags);
nbd->task_send = NULL;
+ spin_unlock_irqrestore(&nbd->tasks_lock, flags);
+
+ /* Clear maybe pending signals */
+ if (signal_pending(current)) {
+ siginfo_t info;
+ dequeue_signal_lock(current, ¤t->blocked, &info);
+ }
return 0;
}
nbd_dev[i].magic = NBD_MAGIC;
INIT_LIST_HEAD(&nbd_dev[i].waiting_queue);
spin_lock_init(&nbd_dev[i].queue_lock);
+ spin_lock_init(&nbd_dev[i].tasks_lock);
INIT_LIST_HEAD(&nbd_dev[i].queue_head);
mutex_init(&nbd_dev[i].tx_lock);
init_timer(&nbd_dev[i].timeout_timer);
struct nvme_iod *iod = ctx;
struct request *req = iod_get_private(iod);
struct nvme_cmd_info *cmd_rq = blk_mq_rq_to_pdu(req);
-
u16 status = le16_to_cpup(&cqe->status) >> 1;
+ bool requeue = false;
+ int error = 0;
if (unlikely(status)) {
if (!(status & NVME_SC_DNR || blk_noretry_request(req))
&& (jiffies - req->start_time) < req->timeout) {
unsigned long flags;
+ requeue = true;
blk_mq_requeue_request(req);
spin_lock_irqsave(req->q->queue_lock, flags);
if (!blk_queue_stopped(req->q))
blk_mq_kick_requeue_list(req->q);
spin_unlock_irqrestore(req->q->queue_lock, flags);
- return;
+ goto release_iod;
}
if (req->cmd_type == REQ_TYPE_DRV_PRIV) {
if (cmd_rq->ctx == CMD_CTX_CANCELLED)
- status = -EINTR;
+ error = -EINTR;
+ else
+ error = status;
} else {
- status = nvme_error_status(status);
+ error = nvme_error_status(status);
}
}
if (cmd_rq->aborted)
dev_warn(nvmeq->dev->dev,
"completing aborted command with status:%04x\n",
- status);
+ error);
+release_iod:
if (iod->nents) {
dma_unmap_sg(nvmeq->dev->dev, iod->sg, iod->nents,
rq_data_dir(req) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
}
nvme_free_iod(nvmeq->dev, iod);
- blk_mq_complete_request(req, status);
+ if (likely(!requeue))
+ blk_mq_complete_request(req, error);
}
/* length is in bytes. gfp flags indicates whether we may sleep. */
length = (io.nblocks + 1) << ns->lba_shift;
meta_len = (io.nblocks + 1) * ns->ms;
- metadata = (void __user *)(unsigned long)io.metadata;
+ metadata = (void __user *)(uintptr_t)io.metadata;
write = io.opcode & 1;
if (ns->ext) {
c.rw.metadata = cpu_to_le64(meta_dma);
status = __nvme_submit_sync_cmd(ns->queue, &c, NULL,
- (void __user *)io.addr, length, NULL, 0);
+ (void __user *)(uintptr_t)io.addr, length, NULL, 0);
unmap:
if (meta) {
if (status == NVME_SC_SUCCESS && !write) {
timeout = msecs_to_jiffies(cmd.timeout_ms);
status = __nvme_submit_sync_cmd(ns ? ns->queue : dev->admin_q, &c,
- NULL, (void __user *)cmd.addr, cmd.data_len,
+ NULL, (void __user *)(uintptr_t)cmd.addr, cmd.data_len,
&cmd.result, timeout);
if (status >= 0) {
if (put_user(cmd.result, &ucmd->result))
#define RBD_MINORS_PER_MAJOR 256
#define RBD_SINGLE_MAJOR_PART_SHIFT 4
+#define RBD_MAX_PARENT_CHAIN_LEN 16
+
#define RBD_SNAP_DEV_NAME_PREFIX "snap_"
#define RBD_MAX_SNAP_NAME_LEN \
(NAME_MAX - (sizeof (RBD_SNAP_DEV_NAME_PREFIX) - 1))
size_t count);
static ssize_t rbd_remove_single_major(struct bus_type *bus, const char *buf,
size_t count);
-static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping);
+static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth);
static void rbd_spec_put(struct rbd_spec *spec);
static int rbd_dev_id_to_minor(int dev_id)
return ret;
}
-static int rbd_dev_probe_parent(struct rbd_device *rbd_dev)
+/*
+ * @depth is rbd_dev_image_probe() -> rbd_dev_probe_parent() ->
+ * rbd_dev_image_probe() recursion depth, which means it's also the
+ * length of the already discovered part of the parent chain.
+ */
+static int rbd_dev_probe_parent(struct rbd_device *rbd_dev, int depth)
{
struct rbd_device *parent = NULL;
- struct rbd_spec *parent_spec;
- struct rbd_client *rbdc;
int ret;
if (!rbd_dev->parent_spec)
return 0;
- /*
- * We need to pass a reference to the client and the parent
- * spec when creating the parent rbd_dev. Images related by
- * parent/child relationships always share both.
- */
- parent_spec = rbd_spec_get(rbd_dev->parent_spec);
- rbdc = __rbd_get_client(rbd_dev->rbd_client);
- ret = -ENOMEM;
- parent = rbd_dev_create(rbdc, parent_spec, NULL);
- if (!parent)
+ if (++depth > RBD_MAX_PARENT_CHAIN_LEN) {
+ pr_info("parent chain is too long (%d)\n", depth);
+ ret = -EINVAL;
+ goto out_err;
+ }
+
+ parent = rbd_dev_create(rbd_dev->rbd_client, rbd_dev->parent_spec,
+ NULL);
+ if (!parent) {
+ ret = -ENOMEM;
goto out_err;
+ }
+
+ /*
+ * Images related by parent/child relationships always share
+ * rbd_client and spec/parent_spec, so bump their refcounts.
+ */
+ __rbd_get_client(rbd_dev->rbd_client);
+ rbd_spec_get(rbd_dev->parent_spec);
- ret = rbd_dev_image_probe(parent, false);
+ ret = rbd_dev_image_probe(parent, depth);
if (ret < 0)
goto out_err;
+
rbd_dev->parent = parent;
atomic_set(&rbd_dev->parent_ref, 1);
-
return 0;
+
out_err:
- if (parent) {
- rbd_dev_unparent(rbd_dev);
+ rbd_dev_unparent(rbd_dev);
+ if (parent)
rbd_dev_destroy(parent);
- } else {
- rbd_put_client(rbdc);
- rbd_spec_put(parent_spec);
- }
-
return ret;
}
* parent), initiate a watch on its header object before using that
* object to get detailed information about the rbd image.
*/
-static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping)
+static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
{
int ret;
if (ret)
goto err_out_format;
- if (mapping) {
+ if (!depth) {
ret = rbd_dev_header_watch_sync(rbd_dev);
if (ret) {
if (ret == -ENOENT)
* Otherwise this is a parent image, identified by pool, image
* and snap ids - need to fill in names for those ids.
*/
- if (mapping)
+ if (!depth)
ret = rbd_spec_fill_snap_id(rbd_dev);
else
ret = rbd_spec_fill_names(rbd_dev);
* Need to warn users if this image is the one being
* mapped and has a parent.
*/
- if (mapping && rbd_dev->parent_spec)
+ if (!depth && rbd_dev->parent_spec)
rbd_warn(rbd_dev,
"WARNING: kernel layering is EXPERIMENTAL!");
}
- ret = rbd_dev_probe_parent(rbd_dev);
+ ret = rbd_dev_probe_parent(rbd_dev, depth);
if (ret)
goto err_out_probe;
err_out_probe:
rbd_dev_unprobe(rbd_dev);
err_out_watch:
- if (mapping)
+ if (!depth)
rbd_dev_header_unwatch_sync(rbd_dev);
out_header_name:
kfree(rbd_dev->header_name);
spec = NULL; /* rbd_dev now owns this */
rbd_opts = NULL; /* rbd_dev now owns this */
- rc = rbd_dev_image_probe(rbd_dev, true);
+ rc = rbd_dev_image_probe(rbd_dev, 0);
if (rc < 0)
goto err_out_rbd_dev;
break;
/* Missed the backend's Closing state -- fallthrough */
case XenbusStateClosing:
- blkfront_closing(info);
+ if (info)
+ blkfront_closing(info);
break;
}
}
if (!cpumask_test_and_clear_cpu(cpu, &dt->cpu))
break;
target = cpumask_any_but(cpu_online_mask, cpu);
- if (target < 0)
+ if (target >= nr_cpu_ids)
break;
perf_pmu_migrate_context(&dt->pmu, cpu, target);
cpumask_set_cpu(target, &dt->cpu);
- WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
+ if (ccn->irq)
+ WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
default:
break;
}
u8 fan_max_rpm;
/* dpm */
bool dpm_enabled;
+ bool sysfs_initialized;
struct amdgpu_dpm dpm;
const struct firmware *fw; /* SMC firmware */
uint32_t fw_version;
goto cleanup;
}
- fence_get(work->excl);
- for (i = 0; i < work->shared_count; ++i)
- fence_get(work->shared[i]);
-
amdgpu_bo_get_tiling_flags(new_rbo, &tiling_flags);
amdgpu_bo_unreserve(new_rbo);
struct amdgpu_device *adev = dev_get_drvdata(dev);
umode_t effective_mode = attr->mode;
- /* Skip limit attributes if DPM is not enabled */
+ /* Skip attributes if DPM is not enabled */
if (!adev->pm.dpm_enabled &&
(attr == &sensor_dev_attr_temp1_crit.dev_attr.attr ||
- attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr))
+ attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_enable.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_max.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_min.dev_attr.attr))
return 0;
/* Skip fan attributes if fan is not present */
{
int ret;
+ if (adev->pm.sysfs_initialized)
+ return 0;
+
if (adev->pm.funcs->get_temperature == NULL)
return 0;
adev->pm.int_hwmon_dev = hwmon_device_register_with_groups(adev->dev,
return ret;
}
+ adev->pm.sysfs_initialized = true;
+
return 0;
}
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
int ret;
+ if (!amdgpu_dpm)
+ return 0;
+
/* init the sysfs and debugfs files late */
ret = amdgpu_pm_sysfs_init(adev);
if (ret)
list_for_each_entry(port, &mstb->ports, next) {
if (port->port_num == port_num) {
- if (!port->mstb) {
+ mstb = port->mstb;
+ if (!mstb) {
DRM_ERROR("failed to lookup MSTB with lct %d, rad %02x\n", lct, rad[0]);
- return NULL;
+ goto out;
}
- mstb = port->mstb;
break;
}
}
}
kref_get(&mstb->kref);
+out:
mutex_unlock(&mgr->lock);
return mstb;
}
}
/**
- * i915_gem_shrink - Shrink buffer object caches completely
+ * i915_gem_shrink_all - Shrink buffer object caches completely
* @dev_priv: i915 device
*
* This is a simple wraper around i915_gem_shrink() to aggressively shrink all
* Also note, that the object created here is not currently a "first class"
* object, in that several ioctls are banned. These are the CPU access
* ioctls: mmap(), pwrite and pread. In practice, you are expected to use
- * direct access via your pointer rather than use those ioctls.
+ * direct access via your pointer rather than use those ioctls. Another
+ * restriction is that we do not allow userptr surfaces to be pinned to the
+ * hardware and so we reject any attempt to create a framebuffer out of a
+ * userptr.
*
* If you think this is a good interface to use to pass GPU memory between
* drivers, please use dma-buf instead. In fact, wherever possible use
I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
}
+ /*
+ * Apparently we need to have VGA mode enabled prior to changing
+ * the P1/P2 dividers. Otherwise the DPLL will keep using the old
+ * dividers, even though the register value does change.
+ */
+ I915_WRITE(reg, 0);
+
+ I915_WRITE(reg, dpll);
+
/* Wait for the clocks to stabilize. */
POSTING_READ(reg);
udelay(150);
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
struct drm_i915_gem_object *obj = intel_fb->obj;
+ if (obj->userptr.mm) {
+ DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n");
+ return -EINVAL;
+ }
+
return drm_gem_handle_create(file, &obj->base, handle);
}
/* restore vblank interrupts to correct state */
drm_crtc_vblank_reset(&crtc->base);
if (crtc->active) {
+ struct intel_plane *plane;
+
drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
update_scanline_offset(crtc);
drm_crtc_vblank_on(&crtc->base);
+
+ /* Disable everything but the primary plane */
+ for_each_intel_plane_on_crtc(dev, crtc, plane) {
+ if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
+ continue;
+
+ plane->disable_plane(&plane->base, &crtc->base);
+ }
}
/* We need to sanitize the plane -> pipe mapping first because this will
i915_redisable_vga_power_on(dev);
}
-static bool primary_get_hw_state(struct intel_crtc *crtc)
+static bool primary_get_hw_state(struct intel_plane *plane)
{
- struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
+ struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
- return !!(I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE);
+ return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE;
}
-static void readout_plane_state(struct intel_crtc *crtc,
- struct intel_crtc_state *crtc_state)
+/* FIXME read out full plane state for all planes */
+static void readout_plane_state(struct intel_crtc *crtc)
{
- struct intel_plane *p;
- struct intel_plane_state *plane_state;
- bool active = crtc_state->base.active;
-
- for_each_intel_plane(crtc->base.dev, p) {
- if (crtc->pipe != p->pipe)
- continue;
-
- plane_state = to_intel_plane_state(p->base.state);
+ struct drm_plane *primary = crtc->base.primary;
+ struct intel_plane_state *plane_state =
+ to_intel_plane_state(primary->state);
- if (p->base.type == DRM_PLANE_TYPE_PRIMARY) {
- plane_state->visible = primary_get_hw_state(crtc);
- if (plane_state->visible)
- crtc->base.state->plane_mask |=
- 1 << drm_plane_index(&p->base);
- } else {
- if (active)
- p->disable_plane(&p->base, &crtc->base);
+ plane_state->visible =
+ primary_get_hw_state(to_intel_plane(primary));
- plane_state->visible = false;
- }
- }
+ if (plane_state->visible)
+ crtc->base.state->plane_mask |= 1 << drm_plane_index(primary);
}
static void intel_modeset_readout_hw_state(struct drm_device *dev)
crtc->base.state->active = crtc->active;
crtc->base.enabled = crtc->active;
- memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
- if (crtc->base.state->active) {
- intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
- intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
- WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
-
- /*
- * The initial mode needs to be set in order to keep
- * the atomic core happy. It wants a valid mode if the
- * crtc's enabled, so we do the above call.
- *
- * At this point some state updated by the connectors
- * in their ->detect() callback has not run yet, so
- * no recalculation can be done yet.
- *
- * Even if we could do a recalculation and modeset
- * right now it would cause a double modeset if
- * fbdev or userspace chooses a different initial mode.
- *
- * If that happens, someone indicated they wanted a
- * mode change, which means it's safe to do a full
- * recalculation.
- */
- crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
- }
-
- crtc->base.hwmode = crtc->config->base.adjusted_mode;
- readout_plane_state(crtc, to_intel_crtc_state(crtc->base.state));
+ readout_plane_state(crtc);
DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
crtc->base.base.id,
connector->base.name,
connector->base.encoder ? "enabled" : "disabled");
}
+
+ for_each_intel_crtc(dev, crtc) {
+ crtc->base.hwmode = crtc->config->base.adjusted_mode;
+
+ memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
+ if (crtc->base.state->active) {
+ intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
+ intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
+ WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
+
+ /*
+ * The initial mode needs to be set in order to keep
+ * the atomic core happy. It wants a valid mode if the
+ * crtc's enabled, so we do the above call.
+ *
+ * At this point some state updated by the connectors
+ * in their ->detect() callback has not run yet, so
+ * no recalculation can be done yet.
+ *
+ * Even if we could do a recalculation and modeset
+ * right now it would cause a double modeset if
+ * fbdev or userspace chooses a different initial mode.
+ *
+ * If that happens, someone indicated they wanted a
+ * mode change, which means it's safe to do a full
+ * recalculation.
+ */
+ crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
+ }
+ }
}
/* Scan out the current hw modeset state,
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_FLUSH_ENABLE;
}
if (invalidate_domains) {
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_FLUSH_ENABLE;
}
if (invalidate_domains) {
flags |= PIPE_CONTROL_TLB_INVALIDATE;
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_FLUSH_ENABLE;
}
if (invalidate_domains) {
flags |= PIPE_CONTROL_TLB_INVALIDATE;
struct nouveau_bo *nvbo = nouveau_gem_object(gem);
struct nvkm_vma *vma;
- if (nvbo->bo.mem.mem_type == TTM_PL_TT)
+ if (is_power_of_2(nvbo->valid_domains))
+ rep->domain = nvbo->valid_domains;
+ else if (nvbo->bo.mem.mem_type == TTM_PL_TT)
rep->domain = NOUVEAU_GEM_DOMAIN_GART;
else
rep->domain = NOUVEAU_GEM_DOMAIN_VRAM;
-
rep->offset = nvbo->bo.offset;
if (cli->vm) {
vma = nouveau_bo_vma_find(nvbo, cli->vm);
u8 fan_max_rpm;
/* dpm */
bool dpm_enabled;
+ bool sysfs_initialized;
struct radeon_dpm dpm;
};
struct radeon_device *rdev = dev_get_drvdata(dev);
umode_t effective_mode = attr->mode;
- /* Skip limit attributes if DPM is not enabled */
+ /* Skip attributes if DPM is not enabled */
if (rdev->pm.pm_method != PM_METHOD_DPM &&
(attr == &sensor_dev_attr_temp1_crit.dev_attr.attr ||
- attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr))
+ attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_enable.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_max.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_min.dev_attr.attr))
return 0;
/* Skip fan attributes if fan is not present */
if (rdev->pm.pm_method == PM_METHOD_DPM) {
if (rdev->pm.dpm_enabled) {
- ret = device_create_file(rdev->dev, &dev_attr_power_dpm_state);
- if (ret)
- DRM_ERROR("failed to create device file for dpm state\n");
- ret = device_create_file(rdev->dev, &dev_attr_power_dpm_force_performance_level);
- if (ret)
- DRM_ERROR("failed to create device file for dpm state\n");
- /* XXX: these are noops for dpm but are here for backwards compat */
- ret = device_create_file(rdev->dev, &dev_attr_power_profile);
- if (ret)
- DRM_ERROR("failed to create device file for power profile\n");
- ret = device_create_file(rdev->dev, &dev_attr_power_method);
- if (ret)
- DRM_ERROR("failed to create device file for power method\n");
+ if (!rdev->pm.sysfs_initialized) {
+ ret = device_create_file(rdev->dev, &dev_attr_power_dpm_state);
+ if (ret)
+ DRM_ERROR("failed to create device file for dpm state\n");
+ ret = device_create_file(rdev->dev, &dev_attr_power_dpm_force_performance_level);
+ if (ret)
+ DRM_ERROR("failed to create device file for dpm state\n");
+ /* XXX: these are noops for dpm but are here for backwards compat */
+ ret = device_create_file(rdev->dev, &dev_attr_power_profile);
+ if (ret)
+ DRM_ERROR("failed to create device file for power profile\n");
+ ret = device_create_file(rdev->dev, &dev_attr_power_method);
+ if (ret)
+ DRM_ERROR("failed to create device file for power method\n");
+ if (!ret)
+ rdev->pm.sysfs_initialized = true;
+ }
mutex_lock(&rdev->pm.mutex);
ret = radeon_dpm_late_enable(rdev);
}
}
} else {
- if (rdev->pm.num_power_states > 1) {
+ if ((rdev->pm.num_power_states > 1) &&
+ (!rdev->pm.sysfs_initialized)) {
/* where's the best place to put these? */
ret = device_create_file(rdev->dev, &dev_attr_power_profile);
if (ret)
ret = device_create_file(rdev->dev, &dev_attr_power_method);
if (ret)
DRM_ERROR("failed to create device file for power method\n");
+ if (!ret)
+ rdev->pm.sysfs_initialized = true;
}
}
return ret;
*
* Calls vmw_cmdbuf_ctx_process() on all contexts. If any context has
* command buffers left that are not submitted to hardware, Make sure
- * IRQ handling is turned on. Otherwise, make sure it's turned off. This
- * function may return -EAGAIN to indicate it should be rerun due to
- * possibly missed IRQs if IRQs has just been turned on.
+ * IRQ handling is turned on. Otherwise, make sure it's turned off.
*/
-static int vmw_cmdbuf_man_process(struct vmw_cmdbuf_man *man)
+static void vmw_cmdbuf_man_process(struct vmw_cmdbuf_man *man)
{
- int notempty = 0;
+ int notempty;
struct vmw_cmdbuf_context *ctx;
int i;
+retry:
+ notempty = 0;
for_each_cmdbuf_ctx(man, i, ctx)
vmw_cmdbuf_ctx_process(man, ctx, ¬empty);
man->irq_on = true;
/* Rerun in case we just missed an irq. */
- return -EAGAIN;
+ goto retry;
}
-
- return 0;
}
/**
header->cb_context = cb_context;
list_add_tail(&header->list, &man->ctx[cb_context].submitted);
- if (vmw_cmdbuf_man_process(man) == -EAGAIN)
- vmw_cmdbuf_man_process(man);
+ vmw_cmdbuf_man_process(man);
}
/**
struct vmw_cmdbuf_man *man = (struct vmw_cmdbuf_man *) data;
spin_lock(&man->lock);
- if (vmw_cmdbuf_man_process(man) == -EAGAIN)
- (void) vmw_cmdbuf_man_process(man);
+ vmw_cmdbuf_man_process(man);
spin_unlock(&man->lock);
}
struct vmw_cmdbuf_man *man =
container_of(work, struct vmw_cmdbuf_man, work);
struct vmw_cmdbuf_header *entry, *next;
+ uint32_t dummy;
bool restart = false;
spin_lock_bh(&man->lock);
if (restart && vmw_cmdbuf_startstop(man, true))
DRM_ERROR("Failed restarting command buffer context 0.\n");
+ /* Send a new fence in case one was removed */
+ vmw_fifo_send_fence(man->dev_priv, &dummy);
}
/**
DRM_MM_SEARCH_DEFAULT,
DRM_MM_CREATE_DEFAULT);
if (ret) {
- (void) vmw_cmdbuf_man_process(man);
+ vmw_cmdbuf_man_process(man);
ret = drm_mm_insert_node_generic(&man->mm, info->node,
info->page_size, 0, 0,
DRM_MM_SEARCH_DEFAULT,
drm_mm_init(&man->mm, 0, size >> PAGE_SHIFT);
man->has_pool = true;
- man->default_size = default_size;
+
+ /*
+ * For now, set the default size to VMW_CMDBUF_INLINE_SIZE to
+ * prevent deadlocks from happening when vmw_cmdbuf_space_pool()
+ * needs to wait for space and we block on further command
+ * submissions to be able to free up space.
+ */
+ man->default_size = VMW_CMDBUF_INLINE_SIZE;
DRM_INFO("Using command buffers with %s pool.\n",
(man->using_mob) ? "MOB" : "DMA");
struct i2c_msg *msgs = drv_data->msgs;
int num = drv_data->num_msgs;
- return false;
-
if (!drv_data->offload_enabled)
return false;
{
struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
- clk_disable(alg_data->clk);
+ clk_disable_unprepare(alg_data->clk);
return 0;
}
{
struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
- return clk_enable(alg_data->clk);
+ return clk_prepare_enable(alg_data->clk);
}
static SIMPLE_DEV_PM_OPS(i2c_pnx_pm,
if (IS_ERR(alg_data->ioaddr))
return PTR_ERR(alg_data->ioaddr);
- ret = clk_enable(alg_data->clk);
+ ret = clk_prepare_enable(alg_data->clk);
if (ret)
return ret;
return 0;
out_clock:
- clk_disable(alg_data->clk);
+ clk_disable_unprepare(alg_data->clk);
return ret;
}
struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
i2c_del_adapter(&alg_data->adapter);
- clk_disable(alg_data->clk);
+ clk_disable_unprepare(alg_data->clk);
return 0;
}
#define ST_ACCEL_4_BDU_MASK 0x40
#define ST_ACCEL_4_DRDY_IRQ_ADDR 0x21
#define ST_ACCEL_4_DRDY_IRQ_INT1_MASK 0x04
-#define ST_ACCEL_4_IG1_EN_ADDR 0x21
-#define ST_ACCEL_4_IG1_EN_MASK 0x08
#define ST_ACCEL_4_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 5 */
.drdy_irq = {
.addr = ST_ACCEL_4_DRDY_IRQ_ADDR,
.mask_int1 = ST_ACCEL_4_DRDY_IRQ_INT1_MASK,
- .ig1 = {
- .en_addr = ST_ACCEL_4_IG1_EN_ADDR,
- .en_mask = ST_ACCEL_4_IG1_EN_MASK,
- },
},
.multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT,
.bootime = 2, /* guess */
#include <linux/types.h>
#include <linux/gfp.h>
#include <linux/err.h>
+#include <linux/regulator/consumer.h>
#include <linux/iio/iio.h>
+#define TWL4030_USB_SEL_MADC_MCPC (1<<3)
+#define TWL4030_USB_CARKIT_ANA_CTRL 0xBB
+
/**
* struct twl4030_madc_data - a container for madc info
* @dev: Pointer to device structure for madc
* @lock: Mutex protecting this data structure
+ * @regulator: Pointer to bias regulator for madc
* @requests: Array of request struct corresponding to SW1, SW2 and RT
* @use_second_irq: IRQ selection (main or co-processor)
* @imr: Interrupt mask register of MADC
struct twl4030_madc_data {
struct device *dev;
struct mutex lock; /* mutex protecting this data structure */
+ struct regulator *usb3v1;
struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS];
bool use_second_irq;
u8 imr;
}
twl4030_madc = madc;
+ /* Configure MADC[3:6] */
+ ret = twl_i2c_read_u8(TWL_MODULE_USB, ®val,
+ TWL4030_USB_CARKIT_ANA_CTRL);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to read reg CARKIT_ANA_CTRL 0x%X\n",
+ TWL4030_USB_CARKIT_ANA_CTRL);
+ goto err_i2c;
+ }
+ regval |= TWL4030_USB_SEL_MADC_MCPC;
+ ret = twl_i2c_write_u8(TWL_MODULE_USB, regval,
+ TWL4030_USB_CARKIT_ANA_CTRL);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to write reg CARKIT_ANA_CTRL 0x%X\n",
+ TWL4030_USB_CARKIT_ANA_CTRL);
+ goto err_i2c;
+ }
+
+ /* Enable 3v1 bias regulator for MADC[3:6] */
+ madc->usb3v1 = devm_regulator_get(madc->dev, "vusb3v1");
+ if (IS_ERR(madc->usb3v1))
+ return -ENODEV;
+
+ ret = regulator_enable(madc->usb3v1);
+ if (ret)
+ dev_err(madc->dev, "could not enable 3v1 bias regulator\n");
+
ret = iio_device_register(iio_dev);
if (ret) {
dev_err(&pdev->dev, "could not register iio device\n");
twl4030_madc_set_current_generator(madc, 0, 0);
twl4030_madc_set_power(madc, 0);
+ regulator_disable(madc->usb3v1);
+
return 0;
}
memset(&gid_attr, 0, sizeof(gid_attr));
gid_attr.ndev = ndev;
+ mutex_lock(&table->lock);
ix = find_gid(table, NULL, NULL, true, GID_ATTR_FIND_MASK_DEFAULT);
/* Coudn't find default GID location */
WARN_ON(ix < 0);
- mutex_lock(&table->lock);
if (!__ib_cache_gid_get(ib_dev, port, ix,
¤t_gid, ¤t_gid_attr) &&
mode == IB_CACHE_GID_DEFAULT_MODE_SET &&
case IB_CM_SIDR_REQ_RCVD:
spin_unlock_irq(&cm_id_priv->lock);
cm_reject_sidr_req(cm_id_priv, IB_SIDR_REJECT);
+ spin_lock_irq(&cm.lock);
+ if (!RB_EMPTY_NODE(&cm_id_priv->sidr_id_node))
+ rb_erase(&cm_id_priv->sidr_id_node,
+ &cm.remote_sidr_table);
+ spin_unlock_irq(&cm.lock);
break;
case IB_CM_REQ_SENT:
case IB_CM_MRA_REQ_RCVD:
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
spin_lock_irqsave(&cm.lock, flags);
- rb_erase(&cm_id_priv->sidr_id_node, &cm.remote_sidr_table);
+ if (!RB_EMPTY_NODE(&cm_id_priv->sidr_id_node)) {
+ rb_erase(&cm_id_priv->sidr_id_node, &cm.remote_sidr_table);
+ RB_CLEAR_NODE(&cm_id_priv->sidr_id_node);
+ }
spin_unlock_irqrestore(&cm.lock, flags);
return 0;
sizeof(req->local_gid));
req->has_gid = true;
req->service_id = req_param->primary_path->service_id;
- req->pkey = req_param->bth_pkey;
+ req->pkey = be16_to_cpu(req_param->primary_path->pkey);
break;
case IB_CM_SIDR_REQ_RECEIVED:
req->device = sidr_param->listen_id->device;
req->port = sidr_param->port;
req->has_gid = false;
req->service_id = sidr_param->service_id;
- req->pkey = sidr_param->bth_pkey;
+ req->pkey = sidr_param->pkey;
break;
default:
return -EINVAL;
bind_list = cma_ps_find(rdma_ps_from_service_id(req.service_id),
cma_port_from_service_id(req.service_id));
id_priv = cma_find_listener(bind_list, cm_id, ib_event, &req, *net_dev);
- if (IS_ERR(id_priv)) {
+ if (IS_ERR(id_priv) && *net_dev) {
dev_put(*net_dev);
*net_dev = NULL;
}
u8 port, struct net_device *ndev)
{
struct in_device *in_dev;
+ struct sin_list {
+ struct list_head list;
+ struct sockaddr_in ip;
+ };
+ struct sin_list *sin_iter;
+ struct sin_list *sin_temp;
+ LIST_HEAD(sin_list);
if (ndev->reg_state >= NETREG_UNREGISTERING)
return;
- in_dev = in_dev_get(ndev);
- if (!in_dev)
+ rcu_read_lock();
+ in_dev = __in_dev_get_rcu(ndev);
+ if (!in_dev) {
+ rcu_read_unlock();
return;
+ }
for_ifa(in_dev) {
- struct sockaddr_in ip;
+ struct sin_list *entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
- ip.sin_family = AF_INET;
- ip.sin_addr.s_addr = ifa->ifa_address;
- update_gid_ip(GID_ADD, ib_dev, port, ndev,
- (struct sockaddr *)&ip);
+ if (!entry) {
+ pr_warn("roce_gid_mgmt: couldn't allocate entry for IPv4 update\n");
+ continue;
+ }
+ entry->ip.sin_family = AF_INET;
+ entry->ip.sin_addr.s_addr = ifa->ifa_address;
+ list_add_tail(&entry->list, &sin_list);
}
endfor_ifa(in_dev);
+ rcu_read_unlock();
- in_dev_put(in_dev);
+ list_for_each_entry_safe(sin_iter, sin_temp, &sin_list, list) {
+ update_gid_ip(GID_ADD, ib_dev, port, ndev,
+ (struct sockaddr *)&sin_iter->ip);
+ list_del(&sin_iter->list);
+ kfree(sin_iter);
+ }
}
static void enum_netdev_ipv6_ips(struct ib_device *ib_dev,
if (!file)
return -ENOMEM;
+ file->close_wq = create_singlethread_workqueue("ucma_close_id");
+ if (!file->close_wq) {
+ kfree(file);
+ return -ENOMEM;
+ }
+
INIT_LIST_HEAD(&file->event_list);
INIT_LIST_HEAD(&file->ctx_list);
init_waitqueue_head(&file->poll_wait);
mutex_init(&file->mut);
- file->close_wq = create_singlethread_workqueue("ucma_close_id");
filp->private_data = file;
file->filp = filp;
return -ENOMEM;
/* It is large page*/
if (largepage_lvl > 1) {
+ unsigned long nr_superpages, end_pfn;
+
pteval |= DMA_PTE_LARGE_PAGE;
lvl_pages = lvl_to_nr_pages(largepage_lvl);
+
+ nr_superpages = sg_res / lvl_pages;
+ end_pfn = iov_pfn + nr_superpages * lvl_pages - 1;
+
/*
* Ensure that old small page tables are
- * removed to make room for superpage,
- * if they exist.
+ * removed to make room for superpage(s).
*/
- dma_pte_free_pagetable(domain, iov_pfn,
- iov_pfn + lvl_pages - 1);
+ dma_pte_free_pagetable(domain, iov_pfn, end_pfn);
} else {
pteval &= ~(uint64_t)DMA_PTE_LARGE_PAGE;
}
disk_super = dm_block_data(sblock);
+ disk_super->flags = cpu_to_le32(cmd->flags);
if (mutator)
update_flags(disk_super, mutator);
- disk_super->flags = cpu_to_le32(cmd->flags);
disk_super->mapping_root = cpu_to_le64(cmd->root);
disk_super->hint_root = cpu_to_le64(cmd->hint_root);
disk_super->discard_root = cpu_to_le64(cmd->discard_root);
{
int s;
uint32_t max_entries = le32_to_cpu(left->header.max_entries);
- unsigned target = (nr_left + nr_center + nr_right) / 3;
- BUG_ON(target > max_entries);
+ unsigned total = nr_left + nr_center + nr_right;
+ unsigned target_right = total / 3;
+ unsigned remainder = (target_right * 3) != total;
+ unsigned target_left = target_right + remainder;
+
+ BUG_ON(target_left > max_entries);
+ BUG_ON(target_right > max_entries);
if (nr_left < nr_right) {
- s = nr_left - target;
+ s = nr_left - target_left;
if (s < 0 && nr_center < -s) {
/* not enough in central node */
} else
shift(left, center, s);
- shift(center, right, target - nr_right);
+ shift(center, right, target_right - nr_right);
} else {
- s = target - nr_right;
+ s = target_right - nr_right;
if (s > 0 && nr_center < s) {
/* not enough in central node */
shift(center, right, nr_center);
} else
shift(center, right, s);
- shift(left, center, nr_left - target);
+ shift(left, center, nr_left - target_left);
}
*key_ptr(parent, c->index) = center->keys[0];
r = new_block(s->info, &right);
if (r < 0) {
- /* FIXME: put left */
+ unlock_block(s->info, left);
return r;
}
const struct horus3a_config *config,
struct i2c_adapter *i2c);
#else
-static inline struct dvb_frontend *horus3a_attach(
- const struct cxd2820r_config *config,
+static inline struct dvb_frontend *horus3a_attach(struct dvb_frontend *fe,
+ const struct horus3a_config *config,
struct i2c_adapter *i2c)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
struct lnbh25_config *cfg,
struct i2c_adapter *i2c);
#else
-static inline dvb_frontend *lnbh25_attach(
+static inline struct dvb_frontend *lnbh25_attach(
struct dvb_frontend *fe,
struct lnbh25_config *cfg,
struct i2c_adapter *i2c)
static struct dvb_frontend_ops m88ds3103_ops;
+/* write single register with mask */
+static int m88ds3103_update_bits(struct m88ds3103_dev *dev,
+ u8 reg, u8 mask, u8 val)
+{
+ int ret;
+ u8 tmp;
+
+ /* no need for read if whole reg is written */
+ if (mask != 0xff) {
+ ret = regmap_bulk_read(dev->regmap, reg, &tmp, 1);
+ if (ret)
+ return ret;
+
+ val &= mask;
+ tmp &= ~mask;
+ val |= tmp;
+ }
+
+ return regmap_bulk_write(dev->regmap, reg, &val, 1);
+}
+
/* write reg val table using reg addr auto increment */
static int m88ds3103_wr_reg_val_tab(struct m88ds3103_dev *dev,
const struct m88ds3103_reg_val *tab, int tab_len)
u8tmp2 = 0x00; /* 0b00 */
break;
}
- ret = regmap_update_bits(dev->regmap, 0x22, 0xc0, u8tmp1 << 6);
+ ret = m88ds3103_update_bits(dev, 0x22, 0xc0, u8tmp1 << 6);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x24, 0xc0, u8tmp2 << 6);
+ ret = m88ds3103_update_bits(dev, 0x24, 0xc0, u8tmp2 << 6);
if (ret)
goto err;
}
if (ret)
goto err;
}
- ret = regmap_update_bits(dev->regmap, 0x9d, 0x08, 0x08);
+ ret = m88ds3103_update_bits(dev, 0x9d, 0x08, 0x08);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0xf1, 0x01);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x30, 0x80, 0x80);
+ ret = m88ds3103_update_bits(dev, 0x30, 0x80, 0x80);
if (ret)
goto err;
}
switch (dev->cfg->ts_mode) {
case M88DS3103_TS_SERIAL:
case M88DS3103_TS_SERIAL_D7:
- ret = regmap_update_bits(dev->regmap, 0x29, 0x20, u8tmp1);
+ ret = m88ds3103_update_bits(dev, 0x29, 0x20, u8tmp1);
if (ret)
goto err;
u8tmp1 = 0;
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x4d, 0x02, dev->cfg->spec_inv << 1);
+ ret = m88ds3103_update_bits(dev, 0x4d, 0x02, dev->cfg->spec_inv << 1);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x30, 0x10, dev->cfg->agc_inv << 4);
+ ret = m88ds3103_update_bits(dev, 0x30, 0x10, dev->cfg->agc_inv << 4);
if (ret)
goto err;
dev->warm = false;
/* wake up device from sleep */
- ret = regmap_update_bits(dev->regmap, 0x08, 0x01, 0x01);
+ ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x01);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x04, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x00);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x23, 0x10, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x00);
if (ret)
goto err;
utmp = 0x29;
else
utmp = 0x27;
- ret = regmap_update_bits(dev->regmap, utmp, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, utmp, 0x01, 0x00);
if (ret)
goto err;
/* sleep */
- ret = regmap_update_bits(dev->regmap, 0x08, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x04, 0x01, 0x01);
+ ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x23, 0x10, 0x10);
+ ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
if (ret)
goto err;
}
utmp = tone << 7 | dev->cfg->envelope_mode << 5;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xe0, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
utmp = 1 << 2;
- ret = regmap_update_bits(dev->regmap, 0xa1, reg_a1_mask, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa1, reg_a1_mask, utmp);
if (ret)
goto err;
voltage_dis ^= dev->cfg->lnb_en_pol;
utmp = voltage_dis << 1 | voltage_sel << 0;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0x03, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0x03, utmp);
if (ret)
goto err;
}
utmp = dev->cfg->envelope_mode << 5;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xe0, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
} else {
dev_dbg(&client->dev, "diseqc tx timeout\n");
- ret = regmap_update_bits(dev->regmap, 0xa1, 0xc0, 0x40);
+ ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
if (ret)
goto err;
}
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xc0, 0x80);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
if (ret)
goto err;
}
utmp = dev->cfg->envelope_mode << 5;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xe0, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
} else {
dev_dbg(&client->dev, "diseqc tx timeout\n");
- ret = regmap_update_bits(dev->regmap, 0xa1, 0xc0, 0x40);
+ ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
if (ret)
goto err;
}
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xc0, 0x80);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
if (ret)
goto err;
goto err_kfree;
/* sleep */
- ret = regmap_update_bits(dev->regmap, 0x08, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
if (ret)
goto err_kfree;
- ret = regmap_update_bits(dev->regmap, 0x04, 0x01, 0x01);
+ ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
if (ret)
goto err_kfree;
- ret = regmap_update_bits(dev->regmap, 0x23, 0x10, 0x10);
+ ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
if (ret)
goto err_kfree;
/* firmware is in the new format */
for (remaining = fw->size; remaining > 0; remaining -= 17) {
len = fw->data[fw->size - remaining];
+ if (len > SI2168_ARGLEN) {
+ ret = -EINVAL;
+ break;
+ }
memcpy(cmd.args, &fw->data[(fw->size - remaining) + 1], len);
cmd.wlen = len;
cmd.rlen = 1;
u16 reg;
unsigned long flags;
- if (!spi) {
- dev_dbg(&spi->master->dev,
- "%s(): SPI not initialized\n", __func__);
+ if (!spi)
return IRQ_NONE;
- }
+
spin_lock_irqsave(&spi->lock, flags);
reg = readw(&spi->regs->control_stat);
if (!(reg & NETUP_SPI_CTRL_IRQ)) {
unsigned long flags;
struct netup_spi *spi = ndev->spi;
- if (!spi) {
- dev_dbg(&spi->master->dev,
- "%s(): SPI not initialized\n", __func__);
+ if (!spi)
return;
- }
+
spin_lock_irqsave(&spi->lock, flags);
reg = readw(&spi->regs->control_stat);
writew(reg | NETUP_SPI_CTRL_IRQ, &spi->regs->control_stat);
Elf32_Ehdr *ehdr;
Elf32_Phdr *phdr;
u8 __iomem *dst;
- int err, i;
+ int err = 0, i;
if (!fw || !context)
return -EINVAL;
phdr = (Elf32_Phdr *)(fw->data + ehdr->e_phoff);
/* go through the available ELF segments */
- for (i = 0; i < ehdr->e_phnum && !err; i++, phdr++) {
+ for (i = 0; i < ehdr->e_phnum; i++, phdr++) {
/* Only consider LOAD segments */
if (phdr->p_type != PT_LOAD)
static int load_c8sectpfe_fw_step1(struct c8sectpfei *fei)
{
- int ret;
int err;
dev_info(fei->dev, "Loading firmware: %s\n", FIRMWARE_MEMDMA);
if (err) {
dev_err(fei->dev, "request_firmware_nowait err: %d.\n", err);
complete_all(&fei->fw_ack);
- return ret;
+ return err;
}
return 0;
goto clkerr;
if (devm_request_irq(dev, priv->irq, hix5hd2_ir_rx_interrupt,
- IRQF_NO_SUSPEND, pdev->name, priv) < 0) {
+ 0, pdev->name, priv) < 0) {
dev_err(dev, "IRQ %d register failed\n", priv->irq);
ret = -EINVAL;
goto regerr;
for (remaining = fw->size; remaining > 0; remaining -= 17) {
len = fw->data[fw->size - remaining];
+ if (len > SI2157_ARGLEN) {
+ dev_err(&client->dev, "Bad firmware length\n");
+ goto err_release_firmware;
+ }
memcpy(cmd.args, &fw->data[(fw->size - remaining) + 1], len);
cmd.wlen = len;
cmd.rlen = 1;
unsigned int pipe;
u8 requesttype;
+ mutex_lock(&d->usb_mutex);
+
+ if (req->size > sizeof(dev->buf)) {
+ dev_err(&d->intf->dev, "too large message %u\n", req->size);
+ ret = -EINVAL;
+ goto err_mutex_unlock;
+ }
+
if (req->index & CMD_WR_FLAG) {
/* write */
memcpy(dev->buf, req->data, req->size);
dvb_usb_dbg_usb_control_msg(d->udev, 0, requesttype, req->value,
req->index, dev->buf, req->size);
if (ret < 0)
- goto err;
+ goto err_mutex_unlock;
/* read request, copy returned data to return buf */
if (requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
memcpy(req->data, dev->buf, req->size);
+ mutex_unlock(&d->usb_mutex);
+
return 0;
-err:
+err_mutex_unlock:
+ mutex_unlock(&d->usb_mutex);
dev_dbg(&d->intf->dev, "failed=%d\n", ret);
return ret;
}
struct rtl28xxu_dev {
- u8 buf[28];
+ u8 buf[128];
u8 chip_id;
u8 tuner;
char *tuner_name;
# Used by LED subsystem flash drivers
config V4L2_FLASH_LED_CLASS
tristate "V4L2 flash API for LED flash class devices"
- depends on VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on LEDS_CLASS_FLASH
---help---
Say Y here to enable V4L2 flash API support for LED flash
memory drives like NOR, NAND, OneNAND, SRAM.
config OMAP_GPMC_DEBUG
- bool
+ bool "Enable GPMC debug output and skip reset of GPMC during init"
depends on OMAP_GPMC
help
Enables verbose debugging mostly to decode the bootloader provided
- timings. Enable this during development to configure devices
- connected to the GPMC bus.
+ timings. To preserve the bootloader provided timings, the reset
+ of GPMC is skipped during init. Enable this during development to
+ configure devices connected to the GPMC bus.
+
+ NOTE: In addition to matching the register setup with the bootloader
+ you also need to match the GPMC FCLK frequency used by the
+ bootloader or else the GPMC timings won't be identical with the
+ bootloader timings.
config MVEBU_DEVBUS
bool "Marvell EBU Device Bus Controller"
int div;
u32 l;
- gpmc_cs_show_timings(cs, "before gpmc_cs_set_timings");
div = gpmc_calc_divider(t->sync_clk);
if (div < 0)
return div;
if (ret < 0)
goto err;
+ gpmc_cs_show_timings(cs, "before gpmc_cs_program_settings");
ret = gpmc_cs_program_settings(cs, &gpmc_s);
if (ret < 0)
goto err;
/*
* eMMC hardware reset.
*/
-static int mmc_test_hw_reset(struct mmc_test_card *test)
+static int mmc_test_reset(struct mmc_test_card *test)
{
struct mmc_card *card = test->card;
struct mmc_host *host = card->host;
int err;
- if (!mmc_card_mmc(card) || !mmc_can_reset(card))
- return RESULT_UNSUP_CARD;
-
err = mmc_hw_reset(host);
if (!err)
return RESULT_OK;
},
{
- .name = "eMMC hardware reset",
- .run = mmc_test_hw_reset,
+ .name = "Reset test",
+ .run = mmc_test_reset,
},
};
static int mmc_reset(struct mmc_host *host)
{
struct mmc_card *card = host->card;
- u32 status;
if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
return -EOPNOTSUPP;
host->ops->hw_reset(host);
- /* If the reset has happened, then a status command will fail */
- if (!mmc_send_status(card, &status)) {
- mmc_host_clk_release(host);
- return -ENOSYS;
- }
-
/* Set initial state and call mmc_set_ios */
mmc_set_initial_state(host);
mmc_host_clk_release(host);
{PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PEAK_PCI_VENDOR_ID, PEAK_PCIE_OEM_ID, PCI_ANY_ID, PCI_ANY_ID,},
#ifdef CONFIG_CAN_PEAK_PCIEC
{PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PEAK_PCI_VENDOR_ID, PEAK_PCIEC34_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
pdata->debugfs_xpcs_reg = 0;
buf = kasprintf(GFP_KERNEL, "amd-xgbe-%s", pdata->netdev->name);
+ if (!buf)
+ return;
+
pdata->xgbe_debugfs = debugfs_create_dir(buf, NULL);
if (!pdata->xgbe_debugfs) {
netdev_err(pdata->netdev, "debugfs_create_dir failed\n");
+ kfree(buf);
return;
}
udp_rss_requested = 0;
else
return -EINVAL;
+
+ if (CHIP_IS_E1x(bp) && udp_rss_requested) {
+ DP(BNX2X_MSG_ETHTOOL,
+ "57710, 57711 boards don't support RSS according to UDP 4-tuple\n");
+ return -EINVAL;
+ }
+
if ((info->flow_type == UDP_V4_FLOW) &&
(bp->rss_conf_obj.udp_rss_v4 != udp_rss_requested)) {
bp->rss_conf_obj.udp_rss_v4 = udp_rss_requested;
bcmgenet_intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
}
+static void bcmgenet_link_intr_enable(struct bcmgenet_priv *priv)
+{
+ u32 int0_enable = 0;
+
+ /* Monitor cable plug/unplugged event for internal PHY, external PHY
+ * and MoCA PHY
+ */
+ if (priv->internal_phy) {
+ int0_enable |= UMAC_IRQ_LINK_EVENT;
+ } else if (priv->ext_phy) {
+ int0_enable |= UMAC_IRQ_LINK_EVENT;
+ } else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) {
+ if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET)
+ int0_enable |= UMAC_IRQ_LINK_EVENT;
+ }
+ bcmgenet_intrl2_0_writel(priv, int0_enable, INTRL2_CPU_MASK_CLEAR);
+}
+
static int init_umac(struct bcmgenet_priv *priv)
{
struct device *kdev = &priv->pdev->dev;
/* Enable Tx default queue 16 interrupts */
int0_enable |= UMAC_IRQ_TXDMA_DONE;
- /* Monitor cable plug/unplugged event for internal PHY */
- if (priv->internal_phy) {
- int0_enable |= UMAC_IRQ_LINK_EVENT;
- } else if (priv->ext_phy) {
- int0_enable |= UMAC_IRQ_LINK_EVENT;
- } else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) {
- if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET)
- int0_enable |= UMAC_IRQ_LINK_EVENT;
-
+ /* Configure backpressure vectors for MoCA */
+ if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) {
reg = bcmgenet_bp_mc_get(priv);
reg |= BIT(priv->hw_params->bp_in_en_shift);
netif_tx_start_all_queues(dev);
+ /* Monitor link interrupts now */
+ bcmgenet_link_intr_enable(priv);
+
phy_start(priv->phydev);
}
int be_get_temp_freq;
struct be_hwmon hwmon_info;
u8 pf_number;
+ u8 pci_func_num;
struct rss_info rss_info;
/* Filters for packets that need to be sent to BMC */
u32 bmc_filt_mask;
return status;
dest_wrb = be_cmd_copy(adapter, wrb);
- if (!dest_wrb)
- return -EBUSY;
+ if (!dest_wrb) {
+ status = -EBUSY;
+ goto unlock;
+ }
if (use_mcc(adapter))
status = be_mcc_notify_wait(adapter);
if (!status)
memcpy(wrb, dest_wrb, sizeof(*wrb));
+unlock:
be_cmd_unlock(adapter);
return status;
}
be_if_cap_flags(adapter));
}
flags &= be_if_cap_flags(adapter);
+ if (!flags)
+ return -ENOTSUPP;
return __be_cmd_rx_filter(adapter, flags, value);
}
if (!status) {
attribs = attribs_cmd.va + sizeof(struct be_cmd_resp_hdr);
adapter->hba_port_num = attribs->hba_attribs.phy_port;
+ adapter->pci_func_num = attribs->pci_func_num;
serial_num = attribs->hba_attribs.controller_serial_number;
for (i = 0; i < CNTL_SERIAL_NUM_WORDS; i++)
adapter->serial_num[i] = le32_to_cpu(serial_num[i]) &
status = -EINVAL;
goto err;
}
-
adapter->pf_number = desc->pf_num;
be_copy_nic_desc(res, desc);
}
return status;
}
-/* Will use MBOX only if MCCQ has not been created */
+/* Will use MBOX only if MCCQ has not been created
+ * non-zero domain => a PF is querying this on behalf of a VF
+ * zero domain => a PF or a VF is querying this for itself
+ */
int be_cmd_get_profile_config(struct be_adapter *adapter,
struct be_resources *res, u8 query, u8 domain)
{
OPCODE_COMMON_GET_PROFILE_CONFIG,
cmd.size, &wrb, &cmd);
- req->hdr.domain = domain;
if (!lancer_chip(adapter))
req->hdr.version = 1;
req->type = ACTIVE_PROFILE_TYPE;
+ /* When a function is querying profile information relating to
+ * itself hdr.pf_number must be set to it's pci_func_num + 1
+ */
+ req->hdr.domain = domain;
+ if (domain == 0)
+ req->hdr.pf_num = adapter->pci_func_num + 1;
/* When QUERY_MODIFIABLE_FIELDS_TYPE bit is set, cmd returns the
* descriptors with all bits set to "1" for the fields which can be
vf_if_cap_flags &= ~(BE_IF_FLAGS_RSS |
BE_IF_FLAGS_DEFQ_RSS);
}
-
- nic_vft->cap_flags = cpu_to_le32(vf_if_cap_flags);
} else {
num_vf_qs = 1;
}
+ if (res_mod.vf_if_cap_flags & BE_IF_FLAGS_VLAN_PROMISCUOUS) {
+ nic_vft->flags |= BIT(IF_CAPS_FLAGS_VALID_SHIFT);
+ vf_if_cap_flags &= ~BE_IF_FLAGS_VLAN_PROMISCUOUS;
+ }
+
+ nic_vft->cap_flags = cpu_to_le32(vf_if_cap_flags);
nic_vft->rq_count = cpu_to_le16(num_vf_qs);
nic_vft->txq_count = cpu_to_le16(num_vf_qs);
nic_vft->rssq_count = cpu_to_le16(num_vf_qs);
u32 timeout; /* dword 1 */
u32 request_length; /* dword 2 */
u8 version; /* dword 3 */
- u8 rsvd[3]; /* dword 3 */
+ u8 rsvd1; /* dword 3 */
+ u8 pf_num; /* dword 3 */
+ u8 rsvd2; /* dword 3 */
};
#define RESP_HDR_INFO_OPCODE_SHIFT 0 /* bits 0 - 7 */
struct mgmt_controller_attrib {
struct mgmt_hba_attribs hba_attribs;
- u32 rsvd0[10];
+ u32 rsvd0[2];
+ u16 rsvd1;
+ u8 pci_func_num;
+ u8 rsvd2;
+ u32 rsvd3[7];
} __packed;
struct be_cmd_req_cntl_attribs {
struct sk_buff *skb,
struct be_wrb_params *wrb_params)
{
- /* Lancer, SH-R ASICs have a bug wherein Packets that are 32 bytes or
- * less may cause a transmit stall on that port. So the work-around is
- * to pad short packets (<= 32 bytes) to a 36-byte length.
+ /* Lancer, SH and BE3 in SRIOV mode have a bug wherein
+ * packets that are 32b or less may cause a transmit stall
+ * on that port. The workaround is to pad such packets
+ * (len <= 32 bytes) to a minimum length of 36b.
*/
- if (unlikely(!BEx_chip(adapter) && skb->len <= 32)) {
+ if (skb->len <= 32) {
if (skb_put_padto(skb, 36))
return NULL;
}
int status, level;
u16 profile_id;
- status = be_cmd_get_cntl_attributes(adapter);
- if (status)
- return status;
-
status = be_cmd_query_fw_cfg(adapter);
if (status)
return status;
if (!lancer_chip(adapter))
be_cmd_req_native_mode(adapter);
+ /* Need to invoke this cmd first to get the PCI Function Number */
+ status = be_cmd_get_cntl_attributes(adapter);
+ if (status)
+ return status;
+
if (!BE2_chip(adapter) && be_physfn(adapter))
be_alloc_sriov_res(adapter);
return false;
}
- return (fhdr->asic_type_rev >= adapter->asic_rev);
+ /* In BE3 FW images the "asic_type_rev" field doesn't track the
+ * asic_rev of the chips it is compatible with.
+ * When asic_type_rev is 0 the image is compatible only with
+ * pre-BE3-R chips (asic_rev < 0x10)
+ */
+ if (BEx_chip(adapter) && fhdr->asic_type_rev == 0)
+ return adapter->asic_rev < 0x10;
+ else
+ return (fhdr->asic_type_rev >= adapter->asic_rev);
}
static int be_fw_download(struct be_adapter *adapter, const struct firmware* fw)
#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
/*
+ * Return the TBIPA address, starting from the address
+ * of the mapped GFAR MDIO registers (struct gfar)
* This is mildly evil, but so is our hardware for doing this.
* Also, we have to cast back to struct gfar because of
* definition weirdness done in gianfar.h.
*/
-static uint32_t __iomem *get_gfar_tbipa(void __iomem *p)
+static uint32_t __iomem *get_gfar_tbipa_from_mdio(void __iomem *p)
{
struct gfar __iomem *enet_regs = p;
return &enet_regs->tbipa;
}
+/*
+ * Return the TBIPA address, starting from the address
+ * of the mapped GFAR MII registers (gfar_mii_regs[] within struct gfar)
+ */
+static uint32_t __iomem *get_gfar_tbipa_from_mii(void __iomem *p)
+{
+ return get_gfar_tbipa_from_mdio(container_of(p, struct gfar, gfar_mii_regs));
+}
+
/*
* Return the TBIPAR address for an eTSEC2 node
*/
#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
/*
- * Return the TBIPAR address for a QE MDIO node
+ * Return the TBIPAR address for a QE MDIO node, starting from the address
+ * of the mapped MII registers (struct fsl_pq_mii)
*/
static uint32_t __iomem *get_ucc_tbipa(void __iomem *p)
{
- struct fsl_pq_mdio __iomem *mdio = p;
+ struct fsl_pq_mdio __iomem *mdio = container_of(p, struct fsl_pq_mdio, mii);
return &mdio->utbipar;
}
.compatible = "fsl,gianfar-tbi",
.data = &(struct fsl_pq_mdio_data) {
.mii_offset = 0,
- .get_tbipa = get_gfar_tbipa,
+ .get_tbipa = get_gfar_tbipa_from_mii,
},
},
{
.compatible = "fsl,gianfar-mdio",
.data = &(struct fsl_pq_mdio_data) {
.mii_offset = 0,
- .get_tbipa = get_gfar_tbipa,
+ .get_tbipa = get_gfar_tbipa_from_mii,
},
},
{
.compatible = "gianfar",
.data = &(struct fsl_pq_mdio_data) {
.mii_offset = offsetof(struct fsl_pq_mdio, mii),
- .get_tbipa = get_gfar_tbipa,
+ .get_tbipa = get_gfar_tbipa_from_mdio,
},
},
{
tbipa = data->get_tbipa(priv->map);
+ /*
+ * Add consistency check to make sure TBI is contained
+ * within the mapped range (not because we would get a
+ * segfault, rather to catch bugs in computing TBI
+ * address). Print error message but continue anyway.
+ */
+ if ((void *)tbipa > priv->map + resource_size(&res) - 4)
+ dev_err(&pdev->dev, "invalid register map (should be at least 0x%04x to contain TBI address)\n",
+ ((void *)tbipa - priv->map) + 4);
+
iowrite32be(be32_to_cpup(prop), tbipa);
}
}
hw->aq.asq.next_to_use = 0;
hw->aq.asq.next_to_clean = 0;
- hw->aq.asq.count = hw->aq.num_asq_entries;
/* allocate the ring memory */
ret_code = i40e_alloc_adminq_asq_ring(hw);
goto init_adminq_free_rings;
/* success! */
+ hw->aq.asq.count = hw->aq.num_asq_entries;
goto init_adminq_exit;
init_adminq_free_rings:
hw->aq.arq.next_to_use = 0;
hw->aq.arq.next_to_clean = 0;
- hw->aq.arq.count = hw->aq.num_arq_entries;
/* allocate the ring memory */
ret_code = i40e_alloc_adminq_arq_ring(hw);
goto init_adminq_free_rings;
/* success! */
+ hw->aq.arq.count = hw->aq.num_arq_entries;
goto init_adminq_exit;
init_adminq_free_rings:
netdev->hw_enc_features |= NETIF_F_IP_CSUM |
NETIF_F_GSO_UDP_TUNNEL |
+ NETIF_F_GSO_GRE |
NETIF_F_TSO;
netdev->features = NETIF_F_SG |
NETIF_F_SCTP_CSUM |
NETIF_F_HIGHDMA |
NETIF_F_GSO_UDP_TUNNEL |
+ NETIF_F_GSO_GRE |
NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_CTAG_FILTER |
hw->aq.asq.next_to_use = 0;
hw->aq.asq.next_to_clean = 0;
- hw->aq.asq.count = hw->aq.num_asq_entries;
/* allocate the ring memory */
ret_code = i40e_alloc_adminq_asq_ring(hw);
goto init_adminq_free_rings;
/* success! */
+ hw->aq.asq.count = hw->aq.num_asq_entries;
goto init_adminq_exit;
init_adminq_free_rings:
hw->aq.arq.next_to_use = 0;
hw->aq.arq.next_to_clean = 0;
- hw->aq.arq.count = hw->aq.num_arq_entries;
/* allocate the ring memory */
ret_code = i40e_alloc_adminq_arq_ring(hw);
goto init_adminq_free_rings;
/* success! */
+ hw->aq.arq.count = hw->aq.num_arq_entries;
goto init_adminq_exit;
init_adminq_free_rings:
* and performing a NOP command
*/
for(i = 0; !err && (i < dev->caps.num_comp_vectors); ++i) {
+ /* Make sure request_irq was called */
+ if (!priv->eq_table.eq[i].have_irq)
+ continue;
+
/* Temporary use polling for command completions */
mlx4_cmd_use_polling(dev);
if (msi_x) {
int nreq = dev->caps.num_ports * num_online_cpus() + 1;
- bool shared_ports = false;
nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs,
nreq);
- if (nreq > MAX_MSIX) {
+ if (nreq > MAX_MSIX)
nreq = MAX_MSIX;
- shared_ports = true;
- }
entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL);
if (!entries)
bitmap_zero(priv->eq_table.eq[MLX4_EQ_ASYNC].actv_ports.ports,
dev->caps.num_ports);
- if (MLX4_IS_LEGACY_EQ_MODE(dev->caps))
- shared_ports = true;
-
for (i = 0; i < dev->caps.num_comp_vectors + 1; i++) {
if (i == MLX4_EQ_ASYNC)
continue;
priv->eq_table.eq[i].irq =
entries[i + 1 - !!(i > MLX4_EQ_ASYNC)].vector;
- if (shared_ports) {
+ if (MLX4_IS_LEGACY_EQ_MODE(dev->caps)) {
bitmap_fill(priv->eq_table.eq[i].actv_ports.ports,
dev->caps.num_ports);
/* We don't set affinity hint when there
return;
priv->vlan.filter_disabled = false;
+ if (priv->netdev->flags & IFF_PROMISC)
+ return;
mlx5e_del_vlan_rule(priv, MLX5E_VLAN_RULE_TYPE_ANY_VID, 0);
}
return;
priv->vlan.filter_disabled = true;
+ if (priv->netdev->flags & IFF_PROMISC)
+ return;
mlx5e_add_vlan_rule(priv, MLX5E_VLAN_RULE_TYPE_ANY_VID, 0);
}
bool enable_broadcast = !ea->broadcast_enabled && broadcast_enabled;
bool disable_broadcast = ea->broadcast_enabled && !broadcast_enabled;
- if (enable_promisc)
+ if (enable_promisc) {
mlx5e_add_eth_addr_rule(priv, &ea->promisc, MLX5E_PROMISC);
+ if (!priv->vlan.filter_disabled)
+ mlx5e_add_vlan_rule(priv, MLX5E_VLAN_RULE_TYPE_ANY_VID,
+ 0);
+ }
if (enable_allmulti)
mlx5e_add_eth_addr_rule(priv, &ea->allmulti, MLX5E_ALLMULTI);
if (enable_broadcast)
mlx5e_del_eth_addr_from_flow_table(priv, &ea->broadcast);
if (disable_allmulti)
mlx5e_del_eth_addr_from_flow_table(priv, &ea->allmulti);
- if (disable_promisc)
+ if (disable_promisc) {
+ if (!priv->vlan.filter_disabled)
+ mlx5e_del_vlan_rule(priv, MLX5E_VLAN_RULE_TYPE_ANY_VID,
+ 0);
mlx5e_del_eth_addr_from_flow_table(priv, &ea->promisc);
+ }
ea->promisc_enabled = promisc_enabled;
ea->allmulti_enabled = allmulti_enabled;
int err;
memset(in, 0, sizeof(in));
- MLX5_SET(ptys_reg, in, local_port, local_port);
+ MLX5_SET(pvlc_reg, in, local_port, local_port);
err = mlx5_core_access_reg(dev, in, sizeof(in), pvlc,
pvlc_size, MLX5_REG_PVLC, 0, 0);
int err;
int ret;
+ mlxsw_core->emad.trans_active = true;
+
err = mlxsw_core_skb_transmit(mlxsw_core->driver_priv, skb, tx_info);
if (err) {
dev_err(mlxsw_core->bus_info->dev, "Failed to transmit EMAD (tid=%llx)\n",
mlxsw_core->emad.tid);
dev_kfree_skb(skb);
- return err;
+ goto trans_inactive_out;
}
- mlxsw_core->emad.trans_active = true;
ret = wait_event_timeout(mlxsw_core->emad.wait,
!(mlxsw_core->emad.trans_active),
msecs_to_jiffies(MLXSW_EMAD_TIMEOUT_MS));
if (!ret) {
dev_warn(mlxsw_core->bus_info->dev, "EMAD timed-out (tid=%llx)\n",
mlxsw_core->emad.tid);
- mlxsw_core->emad.trans_active = false;
- return -EIO;
+ err = -EIO;
+ goto trans_inactive_out;
}
return 0;
+
+trans_inactive_out:
+ mlxsw_core->emad.trans_active = false;
+ return err;
}
static int mlxsw_emad_process_status(struct mlxsw_core *mlxsw_core,
{
u16 max_index, be_index;
u16 offset; /* byte offset inside the array */
+ u8 in_byte_index;
BUG_ON(index && !item->element_size);
if (item->offset % sizeof(u32) != 0 ||
max_index = (item->size.bytes << 3) / item->element_size - 1;
be_index = max_index - index;
offset = be_index * item->element_size >> 3;
- *shift = index % (BITS_PER_BYTE / item->element_size) << 1;
+ in_byte_index = index % (BITS_PER_BYTE / item->element_size);
+ *shift = in_byte_index * item->element_size;
return item->offset + offset;
}
if (in_mbox)
memcpy(mlxsw_pci->cmd.in_mbox.buf, in_mbox, in_mbox_size);
- mlxsw_pci_write32(mlxsw_pci, CIR_IN_PARAM_HI, in_mapaddr >> 32);
- mlxsw_pci_write32(mlxsw_pci, CIR_IN_PARAM_LO, in_mapaddr);
+ mlxsw_pci_write32(mlxsw_pci, CIR_IN_PARAM_HI, upper_32_bits(in_mapaddr));
+ mlxsw_pci_write32(mlxsw_pci, CIR_IN_PARAM_LO, lower_32_bits(in_mapaddr));
- mlxsw_pci_write32(mlxsw_pci, CIR_OUT_PARAM_HI, out_mapaddr >> 32);
- mlxsw_pci_write32(mlxsw_pci, CIR_OUT_PARAM_LO, out_mapaddr);
+ mlxsw_pci_write32(mlxsw_pci, CIR_OUT_PARAM_HI, upper_32_bits(out_mapaddr));
+ mlxsw_pci_write32(mlxsw_pci, CIR_OUT_PARAM_LO, lower_32_bits(out_mapaddr));
mlxsw_pci_write32(mlxsw_pci, CIR_IN_MODIFIER, in_mod);
mlxsw_pci_write32(mlxsw_pci, CIR_TOKEN, 0);
return 0;
err_register_netdev:
-err_port_admin_status_set:
err_port_mac_learning_mode_set:
err_port_stp_state_set:
+err_port_admin_status_set:
err_port_mtu_set:
err_port_speed_set:
err_port_swid_set:
mac[5] = tmp >> 8;
}
-static void __lpc_eth_clock_enable(struct netdata_local *pldat,
- bool enable)
+static void __lpc_eth_clock_enable(struct netdata_local *pldat, bool enable)
{
if (enable)
- clk_enable(pldat->clk);
+ clk_prepare_enable(pldat->clk);
else
- clk_disable(pldat->clk);
+ clk_disable_unprepare(pldat->clk);
}
static void __lpc_params_setup(struct netdata_local *pldat)
err_out_iounmap:
iounmap(pldat->net_base);
err_out_disable_clocks:
- clk_disable(pldat->clk);
+ clk_disable_unprepare(pldat->clk);
clk_put(pldat->clk);
err_out_free_dev:
free_netdev(ndev);
iounmap(pldat->net_base);
mdiobus_unregister(pldat->mii_bus);
mdiobus_free(pldat->mii_bus);
- clk_disable(pldat->clk);
+ clk_disable_unprepare(pldat->clk);
clk_put(pldat->clk);
free_netdev(ndev);
if (netif_running(ndev)) {
netif_device_detach(ndev);
__lpc_eth_shutdown(pldat);
- clk_disable(pldat->clk);
+ clk_disable_unprepare(pldat->clk);
/*
* Reset again now clock is disable to be sure
}
skb_put(skb, pkt_len);
- skb->protocol = eth_type_trans(skb, dev);
rhine_rx_vlan_tag(skb, desc, data_size);
+ skb->protocol = eth_type_trans(skb, dev);
+
netif_receive_skb(skb);
u64_stats_update_begin(&rp->rx_stats.syncp);
__be16 dst_port = htons(GENEVE_UDP_PORT);
__u8 ttl = 0, tos = 0;
bool metadata = false;
- __be32 rem_addr;
- __u32 vni;
+ __be32 rem_addr = 0;
+ __u32 vni = 0;
- if (!data[IFLA_GENEVE_ID] || !data[IFLA_GENEVE_REMOTE])
- return -EINVAL;
+ if (data[IFLA_GENEVE_ID])
+ vni = nla_get_u32(data[IFLA_GENEVE_ID]);
- vni = nla_get_u32(data[IFLA_GENEVE_ID]);
- rem_addr = nla_get_in_addr(data[IFLA_GENEVE_REMOTE]);
+ if (data[IFLA_GENEVE_REMOTE])
+ rem_addr = nla_get_in_addr(data[IFLA_GENEVE_REMOTE]);
if (data[IFLA_GENEVE_TTL])
ttl = nla_get_u8(data[IFLA_GENEVE_TTL]);
busses. It is required by the Octeon and ThunderX ethernet device
drivers.
- If in doubt, say Y.
-
config MDIO_SUN4I
tristate "Allwinner sun4i MDIO interface support"
depends on ARCH_SUNXI
if (po->pppoe_dev == dev &&
sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND | PPPOX_ZOMBIE)) {
pppox_unbind_sock(sk);
- sk->sk_state = PPPOX_ZOMBIE;
sk->sk_state_change(sk);
po->pppoe_dev = NULL;
dev_put(dev);
* Aten UC210T
* ASIX AX88172
* Billionton Systems, USB2AR
+ * Billionton Systems, GUSB2AM-1G-B
* Buffalo LUA-U2-KTX
* Corega FEther USB2-TX
* D-Link DUB-E100
}
rx->ax_skb = netdev_alloc_skb_ip_align(dev->net,
rx->size);
- if (!rx->ax_skb)
+ if (!rx->ax_skb) {
+ rx->size = 0;
return 0;
+ }
}
if (rx->size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) {
// Billionton Systems, USB2AR
USB_DEVICE (0x08dd, 0x90ff),
.driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Billionton Systems, GUSB2AM-1G-B
+ USB_DEVICE(0x08dd, 0x0114),
+ .driver_info = (unsigned long) &ax88178_info,
}, {
// ATEN UC210T
USB_DEVICE (0x0557, 0x2009),
struct vxlan_config conf;
int err;
- if (!data[IFLA_VXLAN_ID])
- return -EINVAL;
-
memset(&conf, 0, sizeof(conf));
- conf.vni = nla_get_u32(data[IFLA_VXLAN_ID]);
+
+ if (data[IFLA_VXLAN_ID])
+ conf.vni = nla_get_u32(data[IFLA_VXLAN_ID]);
if (data[IFLA_VXLAN_GROUP]) {
conf.remote_ip.sin.sin_addr.s_addr = nla_get_in_addr(data[IFLA_VXLAN_GROUP]);
#define TARGET_10X_MAX_FRAG_ENTRIES 0
/* 10.2 parameters */
-#define TARGET_10_2_DMA_BURST_SIZE 1
+#define TARGET_10_2_DMA_BURST_SIZE 0
/* Target specific defines for WMI-TLV firmware */
#define TARGET_TLV_NUM_VDEVS 4
#define TARGET_10_4_TX_DBG_LOG_SIZE 1024
#define TARGET_10_4_NUM_WDS_ENTRIES 32
-#define TARGET_10_4_DMA_BURST_SIZE 1
+#define TARGET_10_4_DMA_BURST_SIZE 0
#define TARGET_10_4_MAC_AGGR_DELIM 0
#define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1
#define TARGET_10_4_VOW_CONFIG 0
hw->max_rate_tries = 10;
hw->sta_data_size = sizeof(struct ath_node);
hw->vif_data_size = sizeof(struct ath_vif);
+ hw->extra_tx_headroom = 4;
hw->wiphy->available_antennas_rx = BIT(ah->caps.max_rxchains) - 1;
hw->wiphy->available_antennas_tx = BIT(ah->caps.max_txchains) - 1;
#ifdef CONFIG_B43_BCMA
static const struct bcma_device_id b43_bcma_tbl[] = {
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x11, BCMA_ANY_CLASS),
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x15, BCMA_ANY_CLASS),
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x17, BCMA_ANY_CLASS),
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x18, BCMA_ANY_CLASS),
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1C, BCMA_ANY_CLASS),
u8 *pn = seq.ccmp.pn;
ieee80211_get_key_rx_seq(key, i, &seq);
- aes_sc->pn = cpu_to_le64(
+ aes_sc[i].pn = cpu_to_le64(
(u64)pn[5] |
((u64)pn[4] << 8) |
((u64)pn[3] << 16) |
};
MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
-MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL3160_UCODE_API_OK));
+MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
MODULE_FIRMWARE(IWL7265_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
MODULE_FIRMWARE(IWL7265D_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
break;
case WLAN_CIPHER_SUITE_CCMP:
if (sta) {
- u8 *pn = seq.ccmp.pn;
+ u64 pn64;
aes_sc = data->rsc_tsc->all_tsc_rsc.aes.unicast_rsc;
aes_tx_sc = &data->rsc_tsc->all_tsc_rsc.aes.tsc;
- ieee80211_get_key_tx_seq(key, &seq);
- aes_tx_sc->pn = cpu_to_le64((u64)pn[5] |
- ((u64)pn[4] << 8) |
- ((u64)pn[3] << 16) |
- ((u64)pn[2] << 24) |
- ((u64)pn[1] << 32) |
- ((u64)pn[0] << 40));
+ pn64 = atomic64_read(&key->tx_pn);
+ aes_tx_sc->pn = cpu_to_le64(pn64);
} else {
aes_sc = data->rsc_tsc->all_tsc_rsc.aes.multicast_rsc;
}
u8 *pn = seq.ccmp.pn;
ieee80211_get_key_rx_seq(key, i, &seq);
- aes_sc->pn = cpu_to_le64((u64)pn[5] |
- ((u64)pn[4] << 8) |
- ((u64)pn[3] << 16) |
- ((u64)pn[2] << 24) |
- ((u64)pn[1] << 32) |
- ((u64)pn[0] << 40));
+ aes_sc[i].pn = cpu_to_le64((u64)pn[5] |
+ ((u64)pn[4] << 8) |
+ ((u64)pn[3] << 16) |
+ ((u64)pn[2] << 24) |
+ ((u64)pn[1] << 32) |
+ ((u64)pn[0] << 40));
}
data->use_rsc_tsc = true;
break;
switch (key->cipher) {
case WLAN_CIPHER_SUITE_CCMP:
- iwl_mvm_aes_sc_to_seq(&sc->aes.tsc, &seq);
iwl_mvm_set_aes_rx_seq(sc->aes.unicast_rsc, key);
+ atomic64_set(&key->tx_pn, le64_to_cpu(sc->aes.tsc.pn));
break;
case WLAN_CIPHER_SUITE_TKIP:
iwl_mvm_tkip_sc_to_seq(&sc->tkip.tsc, &seq);
iwl_mvm_set_tkip_rx_seq(sc->tkip.unicast_rsc, key);
+ ieee80211_set_key_tx_seq(key, &seq);
break;
}
- ieee80211_set_key_tx_seq(key, &seq);
/* that's it for this key */
return;
* abort after reading the nvm in case RF Kill is on, we will complete
* the init seq later when RF kill will switch to off
*/
- if (iwl_mvm_is_radio_killed(mvm)) {
+ if (iwl_mvm_is_radio_hw_killed(mvm)) {
IWL_DEBUG_RF_KILL(mvm,
"jump over all phy activities due to RF kill\n");
iwl_remove_notification(&mvm->notif_wait, &calib_wait);
ret = iwl_wait_notification(&mvm->notif_wait, &calib_wait,
MVM_UCODE_CALIB_TIMEOUT);
- if (ret && iwl_mvm_is_radio_killed(mvm)) {
+ if (ret && iwl_mvm_is_radio_hw_killed(mvm)) {
IWL_DEBUG_RF_KILL(mvm, "RFKILL while calibrating.\n");
ret = 1;
}
iwl_mvm_remove_time_event(mvm, mvmvif,
&mvmvif->time_event_data);
RCU_INIT_POINTER(mvm->csa_vif, NULL);
+ mvmvif->csa_countdown = false;
}
if (rcu_access_pointer(mvm->csa_tx_blocked_vif) == vif) {
test_bit(IWL_MVM_STATUS_HW_CTKILL, &mvm->status);
}
+static inline bool iwl_mvm_is_radio_hw_killed(struct iwl_mvm *mvm)
+{
+ return test_bit(IWL_MVM_STATUS_HW_RFKILL, &mvm->status);
+}
+
/* Must be called with rcu_read_lock() held and it can only be
* released when mvmsta is not needed anymore.
*/
ieee80211_unregister_hw(mvm->hw);
iwl_mvm_leds_exit(mvm);
out_free:
+ flush_delayed_work(&mvm->fw_dump_wk);
iwl_phy_db_free(mvm->phy_db);
kfree(mvm->scan_cmd);
if (!cfg->no_power_up_nic_in_init || !mvm->nvm_file_name)
{IWL_PCI_DEVICE(0x095A, 0x5590, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095B, 0x5290, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5490, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x5F10, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095B, 0x5212, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095B, 0x520A, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x9000, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x9400, iwl7265_2ac_cfg)},
/* 8000 Series */
{IWL_PCI_DEVICE(0x24F3, 0x0010, iwl8260_2ac_cfg)},
{ USB_DEVICE(0x0db0, 0x871c) },
{ USB_DEVICE(0x0db0, 0x899a) },
/* Ovislink */
+ { USB_DEVICE(0x1b75, 0x3070) },
{ USB_DEVICE(0x1b75, 0x3071) },
{ USB_DEVICE(0x1b75, 0x3072) },
{ USB_DEVICE(0x1b75, 0xa200) },
/* MSI support */
bool msi_support;
bool using_msi;
+ /* interrupt clear before set */
+ bool int_clear;
};
struct mp_adapter {
}
}
+static void rtl8821ae_clear_interrupt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 tmp = rtl_read_dword(rtlpriv, REG_HISR);
+
+ rtl_write_dword(rtlpriv, REG_HISR, tmp);
+
+ tmp = rtl_read_dword(rtlpriv, REG_HISRE);
+ rtl_write_dword(rtlpriv, REG_HISRE, tmp);
+
+ tmp = rtl_read_dword(rtlpriv, REG_HSISR);
+ rtl_write_dword(rtlpriv, REG_HSISR, tmp);
+}
+
void rtl8821ae_enable_interrupt(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ if (!rtlpci->int_clear)
+ rtl8821ae_clear_interrupt(hw);/*clear it here first*/
+
rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
rtlpci->irq_enabled = true;
rtl8821ae_bt_reg_init(hw);
rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
+ rtlpci->int_clear = rtlpriv->cfg->mod_params->int_clear;
rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer();
rtlpriv->dm.dm_initialgain_enable = 1;
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
+ rtlpci->msi_support = rtlpriv->cfg->mod_params->int_clear;
if (rtlpriv->cfg->mod_params->disable_watchdog)
pr_info("watchdog disabled\n");
rtlpriv->psc.reg_fwctrl_lps = 3;
.swctrl_lps = false,
.fwctrl_lps = true,
.msi_support = true,
+ .int_clear = true,
.debug = DBG_EMERG,
.disable_watchdog = 0,
};
module_param_named(msi, rtl8821ae_mod_params.msi_support, bool, 0444);
module_param_named(disable_watchdog, rtl8821ae_mod_params.disable_watchdog,
bool, 0444);
+module_param_named(int_clear, rtl8821ae_mod_params.int_clear, bool, 0444);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n");
MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
+MODULE_PARM_DESC(int_clear, "Set to 1 to disable interrupt clear before set (default 0)\n");
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
/* default 0: 1 means disable */
bool disable_watchdog;
+
+ /* default 0: 1 means do not disable interrupts */
+ bool int_clear;
};
struct rtl_hal_usbint_cfg {
/* Use the number of queues requested by the frontend */
be->vif->queues = vzalloc(requested_num_queues *
sizeof(struct xenvif_queue));
+ if (!be->vif->queues) {
+ xenbus_dev_fatal(dev, -ENOMEM,
+ "allocating queues");
+ return;
+ }
+
be->vif->num_queues = requested_num_queues;
be->vif->stalled_queues = requested_num_queues;
}
/* Now look up the logical CPU number */
- for_each_possible_cpu(cpu)
- if (dn == of_cpu_device_node_get(cpu))
+ for_each_possible_cpu(cpu) {
+ struct device_node *cpu_dn;
+
+ cpu_dn = of_cpu_device_node_get(cpu);
+ of_node_put(cpu_dn);
+
+ if (dn == cpu_dn)
break;
+ }
if (cpu >= nr_cpu_ids) {
pr_warn("Failed to find logical CPU for %s\n",
if (ret)
goto error_ret;
- for (i = 0; i < num_read; i++)
+ for (i = 0; i < num_read / sizeof(u16); i++)
*(((u16 *)rx) + i) = be16_to_cpup((__be16 *)rx + i);
if (copy_to_user(buf, rx, num_read))
case IIO_CHAN_INFO_OFFSET:
if (chan->type == IIO_TEMP) {
/* The calculated value from the ADC is in Kelvin, we
- * want Celsius for hwmon so the offset is
- * -272.15 * scale
+ * want Celsius for hwmon so the offset is -273.15
+ * The offset is applied before scaling so it is
+ * actually -213.15 * 4 / 1.012 = -1079.644268
*/
- *val = -1075;
- *val2 = 691699;
+ *val = -1079;
+ *val2 = 644268;
return IIO_VAL_INT_PLUS_MICRO;
}
if (data->soc == SOC_ARCH_EXYNOS5260)
emul_con = EXYNOS5260_EMUL_CON;
- if (data->soc == SOC_ARCH_EXYNOS5433)
+ else if (data->soc == SOC_ARCH_EXYNOS5433)
emul_con = EXYNOS5433_TMU_EMUL_CON;
else if (data->soc == SOC_ARCH_EXYNOS7)
emul_con = EXYNOS7_TMU_REG_EMUL_CON;
return 0;
dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
- if (dma->tx_size < p->port.fifosize) {
- ret = -EINVAL;
- goto err;
- }
desc = dmaengine_prep_slave_single(dma->txchan,
dma->tx_addr + xmit->tail,
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+ xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
}
/* Fast path - was this the last TRB in the TD for this URB? */
} else if (event_trb == td->last_trb) {
+ if (td->urb_length_set && trb_comp_code == COMP_SHORT_TX)
+ return finish_td(xhci, td, event_trb, event, ep,
+ status, false);
+
if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
td->urb->actual_length =
td->urb->transfer_buffer_length -
td->urb->actual_length +=
TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
+
+ if (trb_comp_code == COMP_SHORT_TX) {
+ xhci_dbg(xhci, "mid bulk/intr SP, wait for last TRB event\n");
+ td->urb_length_set = true;
+ return 0;
+ }
}
return finish_td(xhci, td, event_trb, event, ep, status, false);
u32 trb_comp_code;
int ret = 0;
int td_num = 0;
+ bool handling_skipped_tds = false;
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
xdev = xhci->devs[slot_id];
ep->skip = true;
xhci_dbg(xhci, "Miss service interval error, set skip flag\n");
goto cleanup;
+ case COMP_PING_ERR:
+ ep->skip = true;
+ xhci_dbg(xhci, "No Ping response error, Skip one Isoc TD\n");
+ goto cleanup;
default:
if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
status = 0;
ep, &status);
cleanup:
+
+
+ handling_skipped_tds = ep->skip &&
+ trb_comp_code != COMP_MISSED_INT &&
+ trb_comp_code != COMP_PING_ERR;
+
/*
- * Do not update event ring dequeue pointer if ep->skip is set.
- * Will roll back to continue process missed tds.
+ * Do not update event ring dequeue pointer if we're in a loop
+ * processing missed tds.
*/
- if (trb_comp_code == COMP_MISSED_INT || !ep->skip) {
+ if (!handling_skipped_tds)
inc_deq(xhci, xhci->event_ring);
- }
if (ret) {
urb = td->urb;
* Process them as short transfer until reach the td pointed by
* the event.
*/
- } while (ep->skip && trb_comp_code != COMP_MISSED_INT);
+ } while (handling_skipped_tds);
return 0;
}
con_copy_unimap(vc, svc);
ops = info->fbcon_par;
+ ops->cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms);
p->con_rotate = initial_rotation;
set_blitting_type(vc, info);
alloc_start);
if (ret)
goto out;
- } else {
+ } else if (offset + len > inode->i_size) {
/*
* If we are fallocating from the end of the file onward we
* need to zero out the end of the page if i_size lands in the
if (bctl->flags & ~(BTRFS_BALANCE_ARGS_MASK | BTRFS_BALANCE_TYPE_MASK)) {
ret = -EINVAL;
- goto out_bargs;
+ goto out_bctl;
}
do_balance:
need_unlock = false;
ret = btrfs_balance(bctl, bargs);
+ bctl = NULL;
if (arg) {
if (copy_to_user(arg, bargs, sizeof(*bargs)))
ret = -EFAULT;
}
+out_bctl:
+ kfree(bctl);
out_bargs:
kfree(bargs);
out_unlock:
struct wb_writeback_work *base_work,
bool skip_if_busy)
{
- int next_memcg_id = 0;
- struct bdi_writeback *wb;
- struct wb_iter iter;
+ struct bdi_writeback *last_wb = NULL;
+ struct bdi_writeback *wb = list_entry_rcu(&bdi->wb_list,
+ struct bdi_writeback, bdi_node);
might_sleep();
restart:
rcu_read_lock();
- bdi_for_each_wb(wb, bdi, &iter, next_memcg_id) {
+ list_for_each_entry_continue_rcu(wb, &bdi->wb_list, bdi_node) {
DEFINE_WB_COMPLETION_ONSTACK(fallback_work_done);
struct wb_writeback_work fallback_work;
struct wb_writeback_work *work;
long nr_pages;
+ if (last_wb) {
+ wb_put(last_wb);
+ last_wb = NULL;
+ }
+
/* SYNC_ALL writes out I_DIRTY_TIME too */
if (!wb_has_dirty_io(wb) &&
(base_work->sync_mode == WB_SYNC_NONE ||
wb_queue_work(wb, work);
- next_memcg_id = wb->memcg_css->id + 1;
+ /*
+ * Pin @wb so that it stays on @bdi->wb_list. This allows
+ * continuing iteration from @wb after dropping and
+ * regrabbing&nbs
projects / karo-tx-linux.git / commitdiff