arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG
Add a DTS file for the MP2 Cortex-A53 Soft Macrocell Model implemented
on a LogicTile Express 20MG (V2F-1XV7) daughterboard. This is based on
the version that's currently available from the ARM DTS repository [1].
arm: dts: vexpress: add missing CCI PMU device node to TC2
The CCI device node was added to vexpress CA15_A7(i.e. TC2) much before
the CCI PMU support and binding was added. This patch adds the missing
PMU node so that CCI PMUs can be used on TC2.
Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
Mark Rutland [Wed, 1 Jul 2015 12:36:01 +0000 (13:36 +0100)]
arm: dts: vexpress: describe all PMUs in TC2 dts
The dts for the CoreTile Express A15x2 A7x3 (TC2) only describes the
PMUs of the Cortex-A15 CPUs, and not the Cortex-A7 CPUs.
Now that we have a mechanism for describing disparate PMUs and their
interrupts in device tree, this patch makes use of these to describe the
PMUs for all CPUs in the system. For consistency, the existing A15 PMU
interrupt-affinity property is reflowed across two lines.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
Peter Zijlstra [Wed, 8 Jul 2015 21:18:06 +0000 (06:48 +0930)]
module: Fix load_module() error path
The load_module() error path frees a module but forgot to take it out
of the mod_tree, leaving a dangling entry in the tree, causing havoc.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reported-by: Arthur Marsh <arthur.marsh@internode.on.net> Tested-by: Arthur Marsh <arthur.marsh@internode.on.net> Fixes: 93c2e105f6bc ("module: Optimize __module_address() using a latched RB-tree") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Mark Rutland [Tue, 7 Jul 2015 17:00:49 +0000 (18:00 +0100)]
arm64: entry: handle debug exceptions in el*_inv
Currently we enable debug exceptions before reading ESR_EL1 in both
el0_inv and el1_inv. If a debug exception is taken before we read
ESR_EL1, the value will have been corrupted.
As el*_inv is typically fatal, an intervening debug exception results in
misleading debug information being logged to the console, but is not
otherwise harmful.
As with the other entry paths, we can use the ESR_EL1 value stashed
earlier in the exception entry (in x25 for el0_sync{,_compat}, and x1
for el1_sync), giving us better error reporting in this case.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Dan Carpenter [Fri, 3 Jul 2015 08:54:28 +0000 (11:54 +0300)]
drm/radeon: fix underflow in r600_cp_dispatch_texture()
The "if (pass_size > buf->total)" can underflow so I have changed the
type of size and pass_size to unsigned to avoid this problem.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Grigori Goronzy [Thu, 2 Jul 2015 23:54:12 +0000 (01:54 +0200)]
drm/radeon: default to 2048 MB GART size on SI+
Newer ASICs have more VRAM on average and allocating more GART as
well can have advantages. Also see commit edcd26e8.
Ideally, we should scale GART size based on actual VRAM size, but
that requires significant restructuring of initialization.
v2: extract small helper, apply to error paths
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Grigori Goronzy [Thu, 2 Jul 2015 23:54:11 +0000 (01:54 +0200)]
drm/radeon: fix HDP flushing
This was regressed by commit 39e7f6f8, although I don't know of any
actual issues caused by it.
The storage domain is read without TTM locking now, but the lock
never helped to prevent any races.
Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Grigori Goronzy [Thu, 2 Jul 2015 23:54:10 +0000 (01:54 +0200)]
drm/radeon: use RCU query for GEM_BUSY syscall
We don't need to call the (expensive) radeon_bo_wait, checking the
fences via RCU is much faster. The reservation done by radeon_bo_wait
does not save us from any race conditions.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Kleiner [Fri, 3 Jul 2015 04:03:07 +0000 (06:03 +0200)]
drm/amdgpu: Handle irqs only based on irq ring, not irq status regs.
This is a translation of the patch ...
"drm/radeon: Handle irqs only based on irq ring, not irq status regs."
... for the vblank irq handling, to fix the same problem described
in that patch on the new driver.
Only compile tested due to lack of suitable hw.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> CC: Michel Dänzer <michel.daenzer@amd.com> CC: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Kleiner [Fri, 3 Jul 2015 04:03:06 +0000 (06:03 +0200)]
drm/radeon: Handle irqs only based on irq ring, not irq status regs.
Trying to resolve issues with missed vblanks and impossible
values inside delivered kms pageflip completion events showed
that radeon's irq handling sometimes doesn't handle valid irqs,
but silently skips them. This was observed for vblank interrupts.
Although those irqs have corresponding events queued in the gpu's
irq ring at time of interrupt, and therefore the corresponding
handling code gets triggered by these events, the handling code
sometimes silently skipped processing the irq. The reason for those
skips is that the handling code double-checks for each irq event if
the corresponding irq status bits in the irq status registers
are set. Sometimes those bits are not set at time of check
for valid irqs, maybe due to some hardware race on some setups?
The problem only seems to happen on some machine + card combos
sometimes, e.g., never happened during my testing of different PC
cards of the DCE-2/3/4 generation a year ago, but happens consistently
now on two different Apple Mac cards (RV730, DCE-3, Apple iMac and
Evergreen JUNIPER, DCE-4 in a Apple MacPro). It also doesn't happen
at each interrupt but only occassionally every couple of
hundred or thousand vblank interrupts.
as well as skipped frames and problems for applications that
use kms pageflip events or vblank events, e.g., users of DRI2 and
DRI3/Present, Waylands Weston compositor, etc. See also
After some talking to Alex and Michel, we decided to fix this
by turning the double-check for asserted irq status bits into a
warning. Whenever a irq event is queued in the IH ring, always
execute the corresponding interrupt handler. Still check the irq
status bits, but only to log a DRM_DEBUG message on a mismatch.
This fixed the problems reliably on both previously failing
cards, RV-730 dual-head tested on both crtcs (pipes D1 and D2)
and a triple-output Juniper HD-5770 card tested on all three
available crtcs (D1/D2/D3). The r600 and evergreen irq handling
is therefore tested, but the cik an si handling is only compile
tested due to lack of hw.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> CC: Michel Dänzer <michel.daenzer@amd.com> CC: Alex Deucher <alexander.deucher@amd.com> CC: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "fix" in commit 0b08c5e5944 ("audit: Fix check of return value of
strnlen_user()") didn't fix anything, it broke things. As reported by
Steven Rostedt:
"Yes, strnlen_user() returns 0 on fault, but if you look at what len is
set to, than you would notice that on fault len would be -1"
because we just subtracted one from the return value. So testing
against 0 doesn't test for a fault condition, it tests against a
perfectly valid empty string.
Also fix up the usual braindamage wrt using WARN_ON() inside a
conditional - make it part of the conditional and remove the explicit
unlikely() (which is already part of the WARN_ON*() logic, exactly so
that you don't have to write unreadable code.
Reported-and-tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Cc: Paul Moore <pmoore@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Vetter [Tue, 7 Jul 2015 09:15:47 +0000 (11:15 +0200)]
drm/i915: Use crtc_state->active in primary check_plane func
Since
commit 8c7b5ccb729870e606321b3703e2c2e698c49a95
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:19 2015 +0300
drm/i915: Use atomic helpers for computing changed flags
we compute the plane state for a modeset before actually committing
any changes, which means crtc->active won't be correct yet. Looking at
future work in the modeset conversion targetting 4.3 the only places
where crtc_state->active isn't accurate is when disabling other CRTCs
than the one the modeset is for (when stealing connectors). Which
isn't the case here. And that's also confirmed by an audit, we do
unconditionally update crtc_state->active for the current pipe.
We also don't need to update any other plane check functions since we
only ever add the primary state to the modeset update right now.
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: Move toggling planes out of crtc enable/disable.
and we still need that crtc->active check since the overall modeset
flow doesn't yet take dpms state into account properly. Fixes WARNING
backtraces on at least bdw/hsw due to the ips disabling code being
upset about being run on a switched-off pipe.
We don't need a corresponding change on the enable side since with the
old setCrtc semantics we always force-enable the pipe after a modeset.
And the dpms function intel_crtc_control already checks for ->active.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thomas Gleixner [Sun, 5 Jul 2015 17:12:30 +0000 (17:12 +0000)]
hotplug: Prevent alloc/free of irq descriptors during cpu up/down
When a cpu goes up some architectures (e.g. x86) have to walk the irq
space to set up the vector space for the cpu. While this needs extra
protection at the architecture level we can avoid a few race
conditions by preventing the concurrent allocation/free of irq
descriptors and the associated data.
When a cpu goes down it moves the interrupts which are targeted to
this cpu away by reassigning the affinities. While this happens
interrupts can be allocated and freed, which opens a can of race
conditions in the code which reassignes the affinities because
interrupt descriptors might be freed underneath.
We could protect the irq descriptors with RCU, but that would require
a full tree change of all accesses to interrupt descriptors. But
fortunately these kind of race conditions are rather limited to a few
things like cpu hotplug. The normal setup/teardown is very well
serialized. So the simpler and obvious solution is:
Prevent allocation and freeing of interrupt descriptors accross cpu
hotplug.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: xiao jin <jin.xiao@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.063519515@linutronix.de
When rotated and partial views were added no one spotted the resume
path which assumes only one GGTT VMA per object and hence is now
skipping rebind of alternative views.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The sysfs attributes for the 24x7 counters are dynamically allocated.
Initialize the attributes using sysfs_attr_init() to fix following
warning which occurs when CONFIG_DEBUG_LOCK_VMALLOC=y.
[ 0.346249] audit: initializing netlink subsys (disabled)
[ 0.346284] audit: type=2000 audit(1436295254.340:1): initialized
[ 0.346489] BUG: key c0000000efe90198 not in .data!
[ 0.346491] DEBUG_LOCKS_WARN_ON(1)
[ 0.346502] ------------[ cut here ]------------
[ 0.346504] WARNING: at ../kernel/locking/lockdep.c:3002
[ 0.346506] Modules linked in:
Ian Munsie [Tue, 7 Jul 2015 05:45:45 +0000 (15:45 +1000)]
cxl: Fix off by one error allowing subsequent mmap page to be accessed
It was discovered that if a process mmaped their problem state area they
were able to access one page more than expected, potentially allowing
them to access the problem state area of an unrelated process.
This was due to a simple off by one error in the mmap fault handler
introduced in 0712dc7e73e59d79bcead5d5520acf4e9e917e87 ("cxl: Fix issues
when unmapping contexts"), which is fixed in this patch.
Cc: stable@vger.kernel.org Fixes: 0712dc7e73e5 ("cxl: Fix issues when unmapping contexts") Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Tue, 7 Jul 2015 05:45:46 +0000 (15:45 +1000)]
cxl: Fail mmap if requested mapping is larger than assigned problem state area
This patch makes the mmap call fail outright if the requested region is
larger than the problem state area assigned to the context so the error
is reported immediately rather than waiting for an attempt to access an
address out of bounds.
Although we never expect users to map more than the assigned problem
state area and are not aware of anyone doing this (other than for
testing), this does have the potential to break users if someone has
used a larger range regardless. I'm submitting it for consideration, but
if this change is not considered acceptable the previous patch is
sufficient to prevent access out of bounds without breaking anyone.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
MIPS: O32: Do not handle require 32 bytes from the stack to be readable.
Commit 46e12c07b3b9603c60fc1d421ff18618241cb081 (MIPS: O32 / 32-bit:
Always copy 4 stack arguments.) change the O32 syscall handler to always
load four arguments from the userspace stack even for syscalls that
require fewer or no arguments to be copied. This removes a large table
from kernel space and need to maintain it. It appeared that it was ok
the implementation chosen requires 16 bytes of readable stack space
above the user stack pointer.
Turned out a few threading implementations munmap the user stack before
the thread exits resulting in errors due to the unreadable stack.
We now treat any failed load as a if the loaded value was zero and let
the actual syscall deal with the situation.
Pankaj Dev [Tue, 7 Jul 2015 07:40:50 +0000 (09:40 +0200)]
drivers: clk: st: Incorrect register offset used for lock_status
Incorrect register offset used for sthi407 clockgenC
Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Fixes: 51306d56ba81 ("clk: st: STiH407: Support for clockgenC0") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
"These are late by a week; they should have been merged during the
merge window, but unfortunately, the ARM kernel build/boot farms were
indicating random failures, and it wasn't clear whether the cause was
something in these changes or something during the merge window.
This is a set of merge window fixes with some documentation additions"
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: avoid unwanted GCC memset()/memcpy() optimisations for IO variants
ARM: pgtable: document mapping types
ARM: io: convert ioremap*() to functions
ARM: io: fix ioremap_wt() implementation
ARM: io: document ARM specific behaviour of ioremap*() implementations
ARM: fix lockdep unannotated irqs-off warning
ARM: 8397/1: fix vdsomunge not to depend on glibc specific error.h
ARM: add helpful message when truncating physical memory
ARM: add help text for HIGHPTE configuration entry
ARM: fix DEBUG_SET_MODULE_RONX build dependencies
ARM: 8396/1: use phys_addr_t in pfn_to_kaddr()
ARM: 8394/1: update memblock limit after mapping lowmem
ARM: 8393/1: smp: Fix suspicious RCU usage with ipi tracepoints
Tomas Winkler [Tue, 7 Jul 2015 21:22:03 +0000 (00:22 +0300)]
mei: nfc: fix deadlock on shutdown/suspend path
In function mei_nfc_host_exit mei_cl_remove_device cannot be called
under the device mutex as device removing flow invokes the device driver
remove handler that calls in turn to mei_cl_disable_device which
naturally acquires the device mutex.
Also remove mei_cl_bus_remove_devices which has the same issue, but is
never executed as currently the only device on the mei client bus is NFC
and a new device cannot be easily added till the bus revamp is
completed.
This fixes regression caused by commit be9b720a0ccb ("mei_phy: move all
nfc logic from mei driver to nfc")
Prior to this change the nfc driver remove handler called to no-op
disable function while actual nfc device was disabled directly from the
mei driver.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Making tick_broadcast_oneshot_control() independent from
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST broke the build for
CONFIG_GENERIC_CLOCKEVENTS=n because the function is not defined
there.
Provide a proper stub inline.
Fixes: f32dd1170511 'tick/broadcast: Make idle check independent from mode and config' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
MIPS: Lemote 2F: Fix build caused by recent mass rename.
CC arch/mips/loongson64/lemote-2f/clock.o
/home/ralf/src/linux/linux-mips/arch/mips/loongson64/lemote-2f/clock.c:18:40: fatal error: asm/mach-loongson/loongson.h: No such file or directory
#include <asm/mach-loongson/loongson.h>
^
compilation terminated.
Input: elan_i2c - change the hover event from MT to ST
The firmware only reports hover condition while the very first contact is
approaching the surface; the hover is not reported for the subsequent
contacts. Therefore we should not be using ABS_MT_DISTANCE to report hover
but rather its single-touch counterpart ABS_DISTANCE.
Signed-off-by: Duson Lin <dusonlin@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When the second hpet is installed as a per cpu timer the broadcast
event is not longer required and stopped, which sets the next_evt of
the broadcast device to KTIME_MAX.
If after that a spurious interrupt happens on the broadcast device,
then the current code blindly handles it and tries to reprogram the
broadcast device afterwards, which adds the period to
next_evt. KTIME_MAX + period results in a negative expiry value
causing the WARN_ON in the clockevents code to trigger.
Add a proper check for the state of the broadcast device into the
interrupt handler and return if the interrupt is spurious.
[ Folded in pointer fix from Sudeep ]
Reported-by: Andriy Gapon <avg@FreeBSD.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20150705205221.802094647@linutronix.de
Thomas Gleixner [Tue, 7 Jul 2015 14:43:04 +0000 (16:43 +0200)]
tick/broadcast: Check for hrtimer broadcast active early
If the current cpu is the one which has the hrtimer based broadcast
queued then we better return busy immediately instead of going through
loops and hoops to figure that out.
[ Split out from a larger combo patch ]
Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Suzuki Poulose <Suzuki.Poulose@arm.com> Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com> Cc: Catalin Marinas <Catalin.Marinas@arm.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos
Thomas Gleixner [Tue, 7 Jul 2015 14:38:11 +0000 (16:38 +0200)]
tick/broadcast: Move the check for periodic mode inside state handling
We need to check more than the periodic mode for proper operation in
all runtime combinations. To avoid code duplication move the check
into the enter state handling.
No functional change.
[ Split out from a larger combo patch ]
Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Suzuki Poulose <Suzuki.Poulose@arm.com> Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com> Cc: Catalin Marinas <Catalin.Marinas@arm.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos
Thomas Gleixner [Tue, 7 Jul 2015 14:29:38 +0000 (16:29 +0200)]
tick/broadcast: Make idle check independent from mode and config
Currently the broadcast busy check, which prevents the idle code from
going into deep idle, works only in one shot mode.
If NOHZ and HIGHRES are off (config or command line) there is no
sanity check at all, so under certain conditions cpus are allowed to
go into deep idle, where the local timer stops, and are not woken up
again because there is no broadcast timer installed or a hrtimer based
broadcast device is not evaluated.
Move tick_broadcast_oneshot_control() into the common code and provide
proper subfunctions for the various config combinations.
The common check in tick_broadcast_oneshot_control() is for the C3STOP
misfeature flag of the local clock event device. If its not set, idle
can proceed. If set, further checks are necessary.
Provide checks for the trivial cases:
- If broadcast is disabled in the config, then return busy
- If oneshot mode (NOHZ/HIGHES) is disabled in the config, return
busy if the broadcast device is hrtimer based.
- If oneshot mode is enabled in the config call the original
tick_broadcast_oneshot_control() function. That function needs
extra checks which will be implemented in seperate patches.
[ Split out from a larger combo patch ]
Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Suzuki Poulose <Suzuki.Poulose@arm.com> Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com> Cc: Catalin Marinas <Catalin.Marinas@arm.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos
Thomas Gleixner [Tue, 7 Jul 2015 12:07:27 +0000 (14:07 +0200)]
tick/broadcast: Sanity check the shutdown of the local clock_event
The broadcast code shuts down the local clock event unconditionally
even if no broadcast device is installed or if the broadcast device is
hrtimer based.
Add proper sanity checks.
[ Split out from a larger combo patch ]
Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Suzuki Poulose <Suzuki.Poulose@arm.com> Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com> Cc: Catalin Marinas <Catalin.Marinas@arm.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos
Thomas Gleixner [Tue, 7 Jul 2015 12:11:00 +0000 (14:11 +0200)]
tick/broadcast: Prevent hrtimer recursion
The hrtimer based broadcast vehicle can cause a hrtimer recursion
which went unnoticed until we changed the hrtimer expiry code to keep
track of the currently running timer.
Al Stone [Mon, 6 Jul 2015 23:16:48 +0000 (17:16 -0600)]
ACPI / ARM64 : use the new BAD_MADT_GICC_ENTRY macro
For those parts of the arm64 ACPI code that need to check GICC subtables
in the MADT, use the new BAD_MADT_GICC_ENTRY macro instead of the previous
BAD_MADT_ENTRY. The new macro takes into account differences in the size
of the GICC subtable that the old macro did not; this caused failures even
though the subtable entries are valid.
Fixes: aeb823bbacc2 ("ACPICA: ACPI 6.0: Add changes for FADT table.") Signed-off-by: Al Stone <al.stone@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Al Stone [Mon, 6 Jul 2015 23:16:47 +0000 (17:16 -0600)]
ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro
The BAD_MADT_ENTRY() macro is designed to work for all of the subtables
of the MADT. In the ACPI 5.1 version of the spec, the struct for the
GICC subtable (struct acpi_madt_generic_interrupt) is 76 bytes long; in
ACPI 6.0, the struct is 80 bytes long. But, there is only one definition
in ACPICA for this struct -- and that is the 6.0 version. Hence, when
BAD_MADT_ENTRY() compares the struct size to the length in the GICC
subtable, it fails if 5.1 structs are in use, and there are systems in
the wild that have them.
This patch adds the BAD_MADT_GICC_ENTRY() that checks the GICC subtable
only, accounting for the difference in specification versions that are
possible. The BAD_MADT_ENTRY() will continue to work as is for all other
MADT subtables.
This code is being added to an arm64 header file since that is currently
the only architecture using the GICC subtable of the MADT. As a GIC is
specific to ARM, it is also unlikely the subtable will be used elsewhere.
Fixes: aeb823bbacc2 ("ACPICA: ACPI 6.0: Add changes for FADT table.") Signed-off-by: Al Stone <al.stone@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
[catalin.marinas@arm.com: extra brackets around macro arguments] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
PM / wakeirq: Avoid setting power.wakeirq too hastily
If dev_pm_attach_wake_irq() fails, the device's power.wakeirq field
should not be set to point to the struct wake_irq passed to that
function, as that object will be freed going forward.
For this reason, make dev_pm_attach_wake_irq() first call
device_wakeup_attach_irq() and only set the device's power.wakeirq
field if that's successful.
That requires device_wakeup_attach_irq() to be called under the
device's power.lock lock, but since dev_pm_attach_wake_irq() is
the only caller of it, the requisite changes are easy to make.
Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Reported-by: Felipe Balbi <balbi@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Thomas Gleixner [Sun, 5 Jul 2015 17:12:35 +0000 (17:12 +0000)]
x86/irq: Retrieve irq data after locking irq_desc
irq_data is protected by irq_desc->lock, so retrieving the irq chip
from irq_data outside the lock is racy vs. an concurrent update. Move
it into the lock held region.
While at it add a comment why the vector walk does not require
vector_lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: xiao jin <jin.xiao@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.331320612@linutronix.de
Thomas Gleixner [Sun, 5 Jul 2015 17:12:32 +0000 (17:12 +0000)]
x86/irq: Plug irq vector hotplug race
Jin debugged a nasty cpu hotplug race which results in leaking a irq
vector on the newly hotplugged cpu.
cpu N cpu M
native_cpu_up device_shutdown
do_boot_cpu free_msi_irqs
start_secondary arch_teardown_msi_irqs
smp_callin default_teardown_msi_irqs
setup_vector_irq arch_teardown_msi_irq
__setup_vector_irq native_teardown_msi_irq
lock(vector_lock) destroy_irq
install vectors
unlock(vector_lock)
lock(vector_lock)
---> __clear_irq_vector
unlock(vector_lock)
lock(vector_lock)
set_cpu_online
unlock(vector_lock)
This leaves the irq vector(s) which are torn down on CPU M stale in
the vector array of CPU N, because CPU M does not see CPU N online
yet. There is a similar issue with concurrent newly setup interrupts.
The alloc/free protection of irq descriptors does not prevent the
above race, because it merily prevents interrupt descriptors from
going away or changing concurrently.
Prevent this by moving the call to setup_vector_irq() into the
vector_lock held region which protects set_cpu_online():
cpu N cpu M
native_cpu_up device_shutdown
do_boot_cpu free_msi_irqs
start_secondary arch_teardown_msi_irqs
smp_callin default_teardown_msi_irqs
lock(vector_lock) arch_teardown_msi_irq
setup_vector_irq()
__setup_vector_irq native_teardown_msi_irq
install vectors destroy_irq
set_cpu_online
unlock(vector_lock)
lock(vector_lock)
__clear_irq_vector
unlock(vector_lock)
So cpu M either sees the cpu N online before clearing the vector or
cpu N installs the vectors after cpu M has cleared it.
Reported-by: xiao jin <jin.xiao@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.141898931@linutronix.de
Michael Neuling [Tue, 7 Jul 2015 01:01:17 +0000 (11:01 +1000)]
cxl: Fix refcounting in kernel API
Currently the kernel API AFU dev refcounting is done on context start and stop.
This patch moves this refcounting to context init and release, bringing it
inline with how the userspace API does it.
Without this we've seen the refcounting on the AFU get out of whack between the
user and kernel API usage. This causes the AFU structures to be freed when
they are actually still in use.
This fixes some kref warnings we've been seeing and spurious ErrIVTE IRQs.
Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
clockevents: Allow set-state callbacks to be optional
Its mandatory for the drivers to provide set_state_{oneshot|periodic}()
(only if related modes are supported) and set_state_shutdown() callbacks
today, if they are implementing the new set-state interface.
But this leads to unnecessary noop callbacks for drivers which don't
want to implement them. Over that, it will lead to a full function call
for nothing really useful.
powerpc/powernv: Fix race in updating core_idle_state
core_idle_state is maintained for each core. It uses 0-7 bits to track
whether a thread in the core has entered fastsleep or winkle. 8th bit is
used as a lock bit.
The lock bit is set in these 2 scenarios-
- The thread is first in subcore to wakeup from sleep/winkle.
- If its the last thread in the core about to enter sleep/winkle
While the lock bit is set, if any other thread in the core wakes up, it
loops until the lock bit is cleared before proceeding in the wakeup
path. This helps prevent race conditions w.r.t fastsleep workaround and
prevents threads from switching to process context before core/subcore
resources are restored.
But, in the path to sleep/winkle entry, we currently don't check for
lock-bit. This exposes us to following race when running with subcore
on-
First thread in the subcorea Another thread in the same
waking up core entering sleep/winkle
lwarx r15,0,r14
ori r15,r15,PNV_CORE_IDLE_LOCK_BIT
stwcx. r15,0,r14
[Code to restore subcore state]
Here, after the thread entering sleep clears its thread bit in
core_idle_state, the value is overwritten by the thread waking up.
In such cases when the core enters fastsleep, code mistakes an idle
thread as running. Because of this, the first thread waking up from
fastsleep which is supposed to resync timebase skips it. So we can
end up having a core with stale timebase value.
This patch fixes the above race by looping on the lock bit even while
entering the idle states.
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Fixes: 7b54e9f213f76 'powernv/powerpc: Add winkle support for offline cpus' Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
- fix the perf build, by fixing the rbtree.c sharing bug between kernel
and tools/perf by creating a local copy of rbtree.c (more will be
done for v4.3)
- fix an AUX buffer (Intel-PT support) refcounting bug
- fix copy_from_user_nmi() return value"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix copy_from_user_nmi() return if range is not ok
perf: Fix AUX buffer refcounting
tools: Copy rbtree_augmented.h from the kernel
tools: Move rbtree.h from tools/perf/
tools: Copy lib/rbtree.c to tools/lib/
perf tools: Copy rbtree.h from the kernel
tools: Adopt {READ,WRITE_ONCE} from the kernel
ACPI / scan: Add support for ACPI _CLS device matching
Device drivers typically use ACPI _HIDs/_CIDs listed in struct device_driver
acpi_match_table to match devices. However, for generic drivers, we do not
want to list _HID for all supported devices. Also, certain classes of devices
do not have _CID (e.g. SATA, USB). Instead, we can leverage ACPI _CLS,
which specifies PCI-defined class code (i.e. base-class, subclass and
programming interface). This patch adds support for matching ACPI devices using
the _CLS method.
To support loadable module, current design uses _HID or _CID to match device's
modalias. With the new way of matching with _CLS this would requires modification
to the current ACPI modalias key to include _CLS. This patch appends PCI-defined
class-code to the existing ACPI modalias as following.
Uwe Geuder [Mon, 29 Jun 2015 20:35:05 +0000 (23:35 +0300)]
PM / hibernate: clarify resume documentation
it was not the whole truth that kernel mode cannot be used with swap on LVM
Signed-off-by: Uwe Geuder <linuxkernel2015-ugeuder@snkmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PM / Domains: Avoid infinite loops in attach/detach code
If pm_genpd_{add,remove}_device() keeps on failing with -EAGAIN, we end
up with an infinite loop in genpd_dev_pm_{at,de}tach().
This may happen due to a genpd.prepared_count imbalance. This is a bug
elsewhere, but it will result in a system lock up, possibly during
reboot of an otherwise functioning system.
To avoid this, put a limit on the maximum number of loop iterations,
using an exponential back-off mechanism. If the limit is reached, the
operation will just fail. An error message is already printed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Sascha Hauer [Tue, 30 Jun 2015 02:58:44 +0000 (10:58 +0800)]
clk: mediatek: mt8173: Fix enabling of critical clocks
On the MT8173 the clocks are provided by different units. To enable
the critical clocks we must be sure that all parent clocks are already
registered, otherwise the parents of the critical clocks end up being
unused and get disabled later. To find a place where all parents are
registered we try each time after we've registered some clocks if
all known providers are present now and only then we enable the critical
clocks
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
[sboyd@codeaurora.org: Marked function and data __init] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Fix a return value (which should be a negative error code) and a
memory leak (the list allocated by acpi_dev_get_resources() needs
to be freed on ioremap() errors too) in acpi_lpss_create_device()
introduced by commit 4483d59e29fe 'ACPI / LPSS: check the result
of ioremap()'.
Fixes: 4483d59e29fe 'ACPI / LPSS: check the result of ioremap()' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: 4.0+ <stable@vger.kernel.org> # 4.0+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage
This effectively reverts the following three commits:
7bc10388ccdd ACPI / resources: free memory on error in add_region_before() 0f1b414d1907 ACPI / PNP: Avoid conflicting resource reservations b9a5e5e18fbf ACPI / init: Fix the ordering of acpi_reserve_resources()
(commit b9a5e5e18fbf introduced regressions some of which, but not
all, were addressed by commit 0f1b414d1907 and commit 7bc10388ccdd
was a fixup on top of the latter) and causes ACPI fixed hardware
resources to be reserved at the fs_initcall_sync stage of system
initialization.
The story is as follows. First, a boot regression was reported due
to an apparent resource reservation ordering change after a commit
that shouldn't lead to such changes. Investigation led to the
conclusion that the problem happened because acpi_reserve_resources()
was executed at the device_initcall() stage of system initialization
which wasn't strictly ordered with respect to driver initialization
(and with respect to the initialization of the pcieport driver in
particular), so a random change causing the device initcalls to be
run in a different order might break things.
The response to that was to attempt to run acpi_reserve_resources()
as soon as we knew that ACPI would be in use (commit b9a5e5e18fbf).
However, that turned out to be too early, because it caused resource
reservations made by the PNP system driver to fail on at least one
system and that failure was addressed by commit 0f1b414d1907.
That fix still turned out to be insufficient, though, because
calling acpi_reserve_resources() before the fs_initcall stage of
system initialization caused a boot regression to happen on the
eCAFE EC-800-H20G/S netbook. That meant that we only could call
acpi_reserve_resources() at the fs_initcall initialization stage
or later, but then we might just as well call it after the PNP
initalization in which case commit 0f1b414d1907 wouldn't be
necessary any more.
For this reason, the changes made by commit 0f1b414d1907 are reverted
(along with a memory leak fixup on top of that commit), the changes
made by commit b9a5e5e18fbf that went too far are reverted too and
acpi_reserve_resources() is changed into fs_initcall_sync, which
will cause it to be executed after the PNP subsystem initialization
(which is an fs_initcall) and before device initcalls (including
the pcieport driver initialization) which should avoid the initial
issue.
drivers: clk: st: Fix mux bit-setting for Cortex A9 clocks
This patch fixes the mux bit-setting for ClockgenA9.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Fixes: 13e6f2da1ddf ("clk: st: STiH407: Support for A9 MUX Clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Pankaj Dev [Tue, 23 Jun 2015 14:09:24 +0000 (16:09 +0200)]
drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks
Add the CLK_GET_RATE_NOCACHE flag to all the clocks with recalc ops,
so that they reflect Hw rate after CPS wake-up when a clk_get_rate()
is called
Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
While proving lock, the following warning happens
and it is fixed after initializing lock in the setup
function
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.27-02861-g39df285-dirty #33
[<c00154ac>] (unwind_backtrace+0x0/0xf4) from [<c0011b50>] (show_stack+0x10/0x14)
[<c0011b50>] (show_stack+0x10/0x14) from [<c00689ac>] (__lock_acquire+0x900/0xb14)
[<c00689ac>] (__lock_acquire+0x900/0xb14) from [<c0069394>] (lock_acquire+0x68/0x7c)
[<c0069394>] (lock_acquire+0x68/0x7c) from [<c04958f8>] (_raw_spin_lock_irqsave+0x48/0x5c)
[<c04958f8>] (_raw_spin_lock_irqsave+0x48/0x5c) from [<c0381e6c>] (clk_gate_endisable+0x28/0x88)
[<c0381e6c>] (clk_gate_endisable+0x28/0x88) from [<c0381ee0>] (clk_gate_enable+0xc/0x14)
[<c0381ee0>] (clk_gate_enable+0xc/0x14) from [<c0386c68>] (flexgen_enable+0x28/0x40)
[<c0386c68>] (flexgen_enable+0x28/0x40) from [<c037f260>] (__clk_enable+0x5c/0x9c)
[<c037f260>] (__clk_enable+0x5c/0x9c) from [<c037f558>] (clk_enable+0x18/0x2c)
[<c037f558>] (clk_enable+0x18/0x2c) from [<c064a1dc>] (st_lpc_of_register+0xc0/0x248)
[<c064a1dc>] (st_lpc_of_register+0xc0/0x248) from [<c0649e44>] (clocksource_of_init+0x34/0x58)
[<c0649e44>] (clocksource_of_init+0x34/0x58) from [<c0637ddc>] (sti_timer_init+0x10/0x18)
[<c0637ddc>] (sti_timer_init+0x10/0x18) from [<c06343f8>] (time_init+0x20/0x30)
[<c06343f8>] (time_init+0x20/0x30) from [<c0632984>] (start_kernel+0x20c/0x2e8)
[<c0632984>] (start_kernel+0x20c/0x2e8) from [<40008074>] (0x40008074)
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Fixes: b116517055b7 ("clk: st: STiH407: Support for Flexgen Clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch fixes the value for disabling the FSYN channel clock.
The 'is_enabled' returned value is also fixed.
Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Hai Li [Thu, 25 Jun 2015 22:35:33 +0000 (18:35 -0400)]
clk: qcom: Use parent rate when set rate to pixel RCG clock
Since the parent rate has been recalculated, pixel RCG clock
should rely on it to find the correct M/N values during set_rate,
instead of calling __clk_round_rate() to its parent again.
Signed-off-by: Hai Li <hali@codeaurora.org> Tested-by: Archit Taneja <architt@codeaurora.org> Fixes: 99cbd064b059 ("clk: qcom: Support display RCG clocks")
[sboyd@codeaurora.org: Silenced unused parent variable warning] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
arm64: remove another unnecessary libfdt include path
Patch 63a4aea55670 ("of: clean-up unnecessary libfdt include paths")
removed all explicit libfdt include paths, since those are no longer
necessary after the latest dtc upgrade. However, this one snuck in
during the same merge window. Remove it.
Steven Rostedt [Mon, 6 Jul 2015 14:14:34 +0000 (10:14 -0400)]
x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8'
When I enable early_printk on a kernel, I cut and paste the
console= input and add to earlyprintk parameter. But I notice
recently that ktest has not been detecting triple faults. The
way it detects it, is by seeing the kernel banner "Linux version
.." with a different kernel version pop up. Then I noticed that
early printk was no longer working on my console, which was why
ktest was not seeing it.
I bisected it down and it was added to 4.0 with this commit:
ea9e9d802902 ("Specify PCI based UART for earlyprintk")
because it converted the simple_strtoul() that converts the baud
number into a kstrtoul(). The problem with this is, I had as my
baud rate, 115200n8 (acceptable for console=ttyS0), but because
of the "n8", the kstrtoul() doesn't parse the baud rate and
returns an error, which sets the baud rate to the default 9600.
This explains the garbage on my screen.
Now, earlyprintk= kernel parameter does not say it accepts that
format. Thus, one answer would simply be me changing my kernel
parameters to remove the "n8" since it isn't parsed anyway. But
I wonder if other people run into this, and it seems strange
that the two consoles for serial accepts different input.
I could also extend this to have earlyprintk do something with
that "n8" or whatever it has and have it match the console
parsing (which, BTW, still uses simple_strtoul(), as I guess it
has to).
This patch just makes my old kernel parameter parsing work like
it use to.
Although, simple_strtoull() is considered obsolete, it is the
only standard string parsing function that parses a number that
is attached to text. Ironically, commit ea9e9d802902 also added
several calls to simple_strtoul()!
Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Alan Cox <alan@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stuart R. Anderson <stuart.r.anderson@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150706101434.5f6a351b@gandalf.local.home
[ Cleaned it up a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
As we alloc pages with GFP_KERNEL in init_espfix_ap() which is
called before we enable local irqs, so the lockdep sub-system
would (correctly) trigger a warning about the potentially
blocking API.
So we allocate them on the boot CPU side when the secondary CPU is
brought up by the boot CPU, and hand them over to the secondary
CPU.
And we use alloc_pages_node() with the secondary CPU's node, to
make sure the espfix stack is NUMA-local to the CPU that is
going to use it.
While populating zero shadow wrong bits in upper level page
tables used. __PAGE_KERNEL_RO that was used for pgd/pud/pmd has
_PAGE_BIT_GLOBAL set. Global bit is present only in the lowest
level of the page translation hierarchy (ptes), and it should be
zero in upper levels.
This bug seems doesn't cause any troubles on Intel cpus, while
on AMDs it cause kernel crash on boot.
Use _KERNPG_TABLE bits for pgds/puds/pmds to fix this.
Alexander Popov [Thu, 2 Jul 2015 09:09:34 +0000 (12:09 +0300)]
x86/kasan: Fix KASAN shadow region page tables
Currently KASAN shadow region page tables created without
respect of physical offset (phys_base). This causes kernel halt
when phys_base is not zero.
So let's initialize KASAN shadow region page tables in
kasan_early_init() using __pa_nodebug() which considers
phys_base.
This patch also separates x86_64_start_kernel() from KASAN low
level details by moving kasan_map_early_shadow(init_level4_pgt)
into kasan_early_init().
Remove the comment before clear_bss() which stopped bringing
much profit to the code readability. Otherwise describing all
the new order dependencies would be too verbose.
Currently x86_64_start_kernel() has two KASAN related
function calls. The first call maps shadow to early_level4_pgt,
the second maps shadow to init_level4_pgt.
If we move clear_page(init_level4_pgt) earlier, we could hide
KASAN low level detail from generic x86_64 initialization code.
The next patch will do it.
Tomi Valkeinen [Tue, 30 Jun 2015 12:04:54 +0000 (15:04 +0300)]
ARM: dts: am4372.dtsi: disable rfbi
When DSS nodes were added to am4372.dtsi, the rfbi node was not marked
as disabled. This should have been done, as the rule of thumb is to
disable all DSS nodes that are not used, and especially rfbi, as we
don't have a driver for rfbi.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Dave Gerlach [Wed, 6 May 2015 17:25:33 +0000 (12:25 -0500)]
ARM: dts: am4372: Add emif node
Add node for TI AM4372 EMIF. Without this we get a warning with the
recent commit fabbe6df (ARM: OMAP: AM43xx hwmod: Add data for am43xx
emif hwmod).
Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com>
[tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
The latest revision of Beaglebone Black does not support RTC-only mode.
To avoid potential hardware damage, RTC-only mode was disabled by
default by commit 7a6cb0abe1aa ("ARM: dts: am335x-boneblack: disable
RTC-only sleep to avoid hardware damage").
Unfortunately, an incorrect fix had already been applied, which instead
of just disabling RTC-only mode, prevents the Beaglebone from powering
down at all.
Revert this patch to fix the power-off regression.
Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Yann Droneaud [Mon, 22 Jun 2015 19:38:43 +0000 (21:38 +0200)]
perf/x86: Fix copy_from_user_nmi() return if range is not ok
Commit 0a196848ca36 ("perf: Fix arch_perf_out_copy_user default"),
changes copy_from_user_nmi() to return the number of
remaining bytes so that it behave like copy_from_user().
Unfortunately, when the range is outside of the process
memory, the return value is still the number of byte
copied, eg. 0, instead of the remaining bytes.
As all users of copy_from_user_nmi() were modified as
part of commit 0a196848ca36, the function should be
fixed to return the total number of bytes if range is
not correct.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435001923-30986-1-git-send-email-ydroneaud@opteya.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
The conversion of opal events to a proper irqchip means that handlers
are called until the relevant opal event has been cleared by
processing it. Events that queue work should therefore use a threaded
handler to mask the event until processing is complete.
Daniel Axtens [Sun, 5 Jul 2015 23:40:34 +0000 (09:40 +1000)]
powerpc/ppc4xx_hsta_msi: Include ppc-pci.h to fix reference to hose_list
An earlier commit referenced 'hose_list' in sysdev/ppc4xx_hsta_msi.c.
hose_list is defined in ppc-pci.h, which was not included in that
file. Include it, fixing the build for the akebono defconfig used
by the kbuild test robot.
Fixes: f2c800aaceb6 ("powerpc/ppc4xx_hsta_msi: Move MSI-related ops to pci_controller_ops") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Imre Deak [Thu, 2 Jul 2015 11:29:58 +0000 (14:29 +0300)]
drm/i915/chv: fix HW readout of the port PLL fractional divider
Ville noticed that the PLL HW readout code parsed the fractional
divider value as if the fractional divider was always enabled. This may
result in a port clock state check mismatch if the preceeding modeset
disabled the fractional divider, but left a non-zero divider value in
the register.
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Adrian Hunter [Wed, 3 Jun 2015 07:39:46 +0000 (10:39 +0300)]
x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()
If it takes longer than 12us to read the PIT counter lsb/msb,
then the error margin will never fall below 500ppm within 50ms,
and Fast TSC calibration will always fail.
This patch detects when that will happen and fails fast. Note
the failure message is not printed in that case because:
1. it will always happen on that class of hardware
2. the absence of the message is more informative than its
presence
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/556EB717.9070607@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
powerpc/powernv: Fix vma page prot flags in opal-prd driver
opal-prd driver will mmap() firmware code/data area as private
mapping to prd user space daemon. Write to this page will
trigger COW faults. The new COW pages are normal kernel RAM
pages accounted by the kernel and are not special.
vma->vm_page_prot value will be used at page fault time
for the new COW pages, while pgprot_t value passed in
remap_pfn_range() is used for the initial page table entry.
Hence:
* Do not add _PAGE_SPECIAL in vma, but only for remap_pfn_range()
* Also remap_pfn_range() will add the _PAGE_SPECIAL flag using
pte_mkspecial() call, hence no need to specify in the driver
This fix resolves the page accounting warning shown below:
BUG: Bad rss-counter state mm:c0000007d34ac600 idx:1 val:19
The above warning is triggered since _PAGE_SPECIAL was incorrectly
being set for the normal kernel COW pages.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To complete the transitioning to not to share the same files with the
kernel, also moving it from tools/perf/include/linux/ to
tools/include/linux to make the whoke rbtree kit to other tools/ living
codebases.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-5bxyehixafckqm6ez25alnfo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / karo-tx-linux.git / log