staging: board: disable as it breaks the build

Cc: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: reorder functions and remove forward declarations

Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove wrapper function thread_enter()

The inline function thread_enter() accepts a single ignored parameter and is
just a wrapper for allow_signal(SIGTERM).  Removed.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: move T_CAPABILITY definitions to hci.h

Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: removes redundant null check and change paramter for dgap_maxcps_room()

Null checks for tty, un and ch are already done by caller,
so replace parameter "tty" with "ch" and "un".

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: osdep_service.h: Remove unused struct rtw_cbuf

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused functions rtw_cbuf_[full, empty, push, pop]()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_cbuf_alloc()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use msecs_to_jiffies() instead of rtw_ms_to_systime()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: use jiffies_to_msecs() instead of rtw_systime_to_ms()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_efuse.c: Remove unused functions

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function HalDetectPwrDownMode88E()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused functions rtw_efuse_map_[read, write]()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_efuse.c : Remove unused functions

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function efuse_GetMaxSize()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function efuse_GetCurrentSize()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_alloc_etherdev()

rtw_alloc_etherdev() is used in rtw_init_netdev() but never gets called
because old_padapter is never NULL.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_change_ifname()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove dummy function rtw_free_cmd_priv()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove cmd_seq from struct cmd_priv

Value stored in cmd_seq isn't used by driver.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove unused structures

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove command _Set_H2C_MSG and its handler

_Set_H2C_MSG command is never issued by driver and its handler is a
dummy function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove command _LedBlink and its handler

_LedBlink command is never issued by driver and its handler is a
dummy function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove command _SetChannelSwitch and its handler

_SetChannelSwitch command is never issued by driver and its handler is a
dummy function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove command _TDLS and its handler

_TDLS command is never issued by driver and its handler is a
dummy function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove unused structures

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_[cmd, mlme_ext].h: Remove unused command codes

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_setdatarate_cmd()

rtw_setdatarate_cmd() enqueue _SetDataRate command but there is not
handler mapped in wlancmds[] to handle this command.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_getbbrfreg_cmdrsp_callback()

rtw_getbbrfreg_cmdrsp_callback() is a callback for _Read_BBREG and _Read_RFREG
commands but these commands are never issued by driver.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove members cmd_[allocated,]_buf from struct cmd_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused members rsp_[allocated, ]_buf from struct cmd_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused member cmd_done_cnt from struct cmd_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused member cmd_issued_cnt from struct cmd_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused member rsp_cnt from struct cmd_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename _rtw_dequeue_cmd() to rtw_dequeue_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename _rtw_free_cmd_priv() to rtw_free_cmd_priv()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename _rtw_init_cmd_priv() to rtw_init_cmd_priv()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove wrapper function power_saving_wk_hdl()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove header file cmd_osdep.h

cmd_osdep.h is not required.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove struct Tx_Beacon_param

struct Tx_Beacon_param has only one member.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove struct [join, create]bss_parm

These two structures have only one member.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_cmd_clr_isr()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove unused structures

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove unused macros

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove unused function declaration

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_createbss_cmd_ex()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_setstandby_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_setassocsta_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove dummy function rtw_tdls_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_set_csa_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_set_ch_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_setrttbl_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_[set, get]rfreg_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_getbbreg_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_setbbreg_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_setphy_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_setbasicrate_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_c2h_wk_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_getrttbl_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove unused macro and structure

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_hal_c2h_id_filter_ccx()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove dummy function rtw_hal_c2h_handler()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function c2h_evt_clear()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function c2h_evt_read()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function c2h_evt_hdl()

c2h_evt_hdl() calls a dummy function rtw_hal_c2h_handler() to handle events,
so no use of keeping it.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove struct evt_priv and its uses

c2h_wk (work_struct) is naver scheduled to handle events,
so no use of keeping event data.
And also function rtw_hal_c2h_handler() responsible for handling c2h events,
is a dummy function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove P2P support

We've already removed non-standard ioctl handlers used by driver
to support P2P mode.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove mp( mesh point) mode support

We've already removed non-standard ioctl handlers, used by driver
to support mp mode.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove usb_osintf.h header file.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove files rtw_mp_ioctl.[c,h]

files are not required after removal of private ioctl handlers.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove WEXT_PRIV private ioctl handlers

Remove WEXT_PRIV (non-standard) ioctl handlers.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: re-use hex_to_bin() instead of custom code

hex_to_bin could be used to convert hexdecimal digit to its binary
representation.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: substitute custom hex2bin()

Instead of using custom code to convert hexdecinal strings to their binary
represantation let's use kernel's library function.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: re-use mac_pton() helper

The helper mac_pton() validates and converts MAC address from string format to
a number. Originally code uses simple code to do that. With mac_pton() the
driver now validates input as well.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove #define _workitem struct work_struct

_workitem is just a #define for work_struct.  Remove the #define and
use struct work_struct directly instead.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove wrapper function _set_workitem()

The inline function _set_workitem() simply wraps schedule_work().  Removed.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove wrapper function _init_workitem()

The inline function _init_workitem() is just a wrapper around INIT_WORK().
Oddly, this wrapper accepts 3 parameters while INIT_WORK() only accepts 2.
The third parameter is unused.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: update staging removals and movements

3 sections have been deleted by various commits.  The other, echo, has
been moved to drivers/misc.

The nominal maintainers of the echo subsystem haven't been modifying the
code or acking/signing patches for several years, so don't keep the
section either.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: add missing blank lines after declarations

Fix "Missing blank line after declaration" warnings reported by
checkpatch.pl.

Signed-off-by: Pawel Lebioda <pawel.lebioda89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Register's address offset notation update

In iowrite32() calls, the address of registers was expressed as e.g.
&ep->registers[fpga_msg_ctrl_reg]. This changes to the more common format
e.g. ep->registers + fpga_msg_ctrl_reg.

There is no functional change.

Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Reorganizing xilly_setupchannels()

Duplicate code in this function was moved into a new function,
xilly_get_dma_buffers().

There is no change in functionality.

Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Add sanity check in interrupt handler

Data arriving from the hardware is verified prior to its use. The lack of
this check has never been reported to cause a problem, but it's necessary
nevertheless.

Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Use net_device_stats from struct net_device

Instead of using an own copy of struct net_device_stats in struct
et131x_adapter, use stats from struct net_device.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: use GFP_ATOMIC under spinlock

We're holding a spinlock here so we can't do sleeping allocations.
The call tree is:
  rtw_sta_flush() <-- takes spin_lock_bh(&pstapriv->asoc_list_lock);
  --> ap_free_sta()
      --> rtw_clearstakey_cmd()

Originally these calls were rtw_zmalloc() and then we switched them to
kzalloc() in fadbe0cd5292 ('staging: rtl8188eu:Remove rtw_zmalloc(),
wrapper for kzalloc()') and that made the bugs show up for my static
checker.  The original code was buggy as well but my static checker
couldn't parse it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: check the return value of kobject_set_name

Added a check of the return value of the kobject_set_name function.

Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000-usb: check for errors in card_send_command

kmalloc() result check was lacking. Fixing that required also
changing card_send_command() return type from void to int, and
checking its return code everywhere.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=78561
Reported-by: Maksymilian Arciemowicz <max@cert.cx>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: Introduce the use of managed interfaces

This patch introduces the use of managed interfaces like devm_kzalloc,
devm_ioremap, dmam_alloc_coherent, devm_request_irq and does away with
the calls to functions to free the allocated memory in the probe and
remove functions. Also, the labels are removed in the probe function.

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: remove unneccessary 'out of memory' message

Fix the following warning reported by checkpatch.pl:

WARNING: Possible unnecessary 'out of memory' message
811: FILE: drivers/staging/nvec/nvec.c:811

Signed-off-by: Pawel Lebioda <pawel.lebioda89@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: remove unnecessary 'else' after 'return' statement

Fix the following warning reported by checkpatch.pl:

WARNING: else is not generally useful after a break or return
235: FILE: drivers/staging/nvec/nvec.c:235

Signed-off-by: Pawel Lebioda <pawel.lebioda89@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: insert blank lines after declarations

This patch fixes coding style warnings reported by checkpatch.pl:
"Missing a blank line after declarations".

Signed-off-by: Pawel Lebioda <pawel.lebioda89@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove redundant memset call

The brd is allocated by kzalloc() in dgnc_found_board()
so do not need to set 0 to member variable.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: removes unreachable code

dgnc_tty_ioctl() cannot reach the end of function.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Fix unsigned value for less than zero

The "un->un_open_count" is unsigned variable, so it cannot
be less than zero.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove redundant null check for kfree()

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove redundant NULL check in dgap_tty_init()

The brd is already checked by earlier function in dgap_init_one().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: use kzalloc instead of kmalloc/memset

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove unused waitqueues

dgap_dl_wait and kme_wait are not used in dgap.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove unneccessary dgap_init_pci() function

The dgap_init_pci() calls only pci_register_driver().
It doesn't need to make a function for that.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Adds a blank line after declaration

clean up checkpatch.pl warning:
WARNING: Missing a blank line after declarations

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove "return" statement in void function

clean up checkpatch warning:
WARNING: void function return statements are not generally useful

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>