1 # ====================================================================
3 # ec555_eth_drivers.cdl
5 # Ethernet drivers - platform dependent support for ether555 on ec555
7 # ====================================================================
8 #####ECOSGPLCOPYRIGHTBEGIN####
9 ## -------------------------------------------
10 ## This file is part of eCos, the Embedded Configurable Operating System.
11 ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
13 ## eCos is free software; you can redistribute it and/or modify it under
14 ## the terms of the GNU General Public License as published by the Free
15 ## Software Foundation; either version 2 or (at your option) any later version.
17 ## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
18 ## WARRANTY; without even the implied warranty of MERCHANTABILITY or
19 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
22 ## You should have received a copy of the GNU General Public License along
23 ## with eCos; if not, write to the Free Software Foundation, Inc.,
24 ## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
26 ## As a special exception, if other files instantiate templates or use macros
27 ## or inline functions from this file, or you compile this file and link it
28 ## with other works to produce a work based on this file, this file does not
29 ## by itself cause the resulting work to be covered by the GNU General Public
30 ## License. However the source code for this file must still be made available
31 ## in accordance with section (3) of the GNU General Public License.
33 ## This exception does not invalidate any other reasons why a work based on
34 ## this file might be covered by the GNU General Public License.
36 ## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
37 ## at http://sources.redhat.com/ecos/ecos-license/
38 ## -------------------------------------------
39 #####ECOSGPLCOPYRIGHTEND####
40 # ====================================================================
41 ######DESCRIPTIONBEGIN####
43 # Author(s): Bob Koninckx
44 # Contributors: Bob Koninckx
47 #####DESCRIPTIONEND####
49 # ====================================================================
51 cdl_package CYGPKG_DEVS_ETH_POWERPC_EC555 {
52 display "Crystal LAN ethernet driver for ec555 boards"
54 parent CYGPKG_IO_ETH_DRIVERS
55 active_if CYGPKG_IO_ETH_DRIVERS
56 active_if CYGPKG_HAL_POWERPC_EC555
58 implements CYGINT_DEVS_ETH_CL_CS8900A_REQUIRED
59 implements CYGINT_DEVS_ETH_CL_CS8900A_STATIC_ESA
61 requires CYGPKG_DEVS_ETH_CL_CS8900A
65 description "Ethernet driver for Crystal LAN based ether555 ethernet card for ec555"
67 # FIXME: This really belongs in the CL CS8900A package
68 cdl_interface CYGINT_DEVS_ETH_CL_CS8900A_REQUIRED {
69 display "CS8900A ethernet driver required"
73 puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
74 puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_CL_CS8900A_INL <cyg/io/devs_eth_powerpc_ec555.inl>"
75 puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_CL_CS8900A_CFG <pkgconf/devs_eth_powerpc_ec555.h>"
76 puts $::cdl_system_header "/***** ethernet driver proc output end *****/"
79 cdl_component CYGPKG_DEVS_ETH_POWERPC_EC555_ETH0 {
80 display "ec555 ethernet port driver"
84 This option includes the ethernet device driver for the
87 implements CYGHWR_NET_DRIVER_ETH0
88 implements CYGINT_DEVS_ETH_CL_CS8900A_REQUIRED
89 implements CYGINT_DEVS_ETH_CL_CS8900A_STATIC_ESA
91 cdl_option CYGDAT_DEVS_ETH_POWERPC_EC555_ETH0_NAME {
92 display "Device name for the ETH0 ethernet driver"
94 default_value {"\"eth0\""}
96 This option sets the name of the ethernet device."
99 cdl_option CYGNUM_DEVS_ETH_POWERPC_EC555_ETH0_CS {
100 display "Memory bank (CS2 / CS3) to use for accessing the device"
105 This option controls which memory controller will be set up for access to
106 the ethernet card. The choise must correspond to the position of jumper
110 cdl_option CYGNUM_DEVS_ETH_POWERPC_EC555_ETH0_BASE {
111 display "Base address to use for accessing the device"
113 calculated { CYGNUM_DEVS_ETH_POWERPC_EC555_ETH0_CS == 2 ? 0x04000000 : 0x08000000 }
115 This option determines the base address to use for the memory controller"
118 cdl_option CYGNUM_DEVS_ETH_POWERPC_EC555_ETH0_IRQ {
119 display "Interrupt line on the ec555 to use"
124 This option determines which interrupt line of the ec555 will be used by the
125 device. The choise must match the position of jumper X2."
128 cdl_component CYGSEM_DEVS_ETH_POWERPC_EC555_ETH0_SET_ESA {
129 display "Set the ethernet station address"
131 description "Enabling this option will allow the ethernet
132 station address to be forced to the value set by the
133 configuration. This may be required if the hardware does
134 not include a serial EEPROM for the ESA."
136 cdl_option CYGDAT_DEVS_ETH_POWERPC_EC555_ETH0_ESA {
137 display "The ethernet station address"
139 default_value {"{0x08, 0x88, 0x12, 0x34, 0x56, 0x78}"}
140 description "The ethernet station address"