arch/arm/cpu/armv7/am33xx/board.c

   1 /*
   2  * board.c
   3  *
   4  * Common board functions for AM33XX based boards
   5  *
   6  * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  */
  18
  19 #include <common.h>
  20 #include <errno.h>
  21 #include <asm/arch/cpu.h>
  22 #include <asm/arch/hardware.h>
  23 #include <asm/arch/omap.h>
  24 #include <asm/arch/ddr_defs.h>
  25 #include <asm/arch/clock.h>
  26 #include <asm/arch/gpio.h>
  27 #include <asm/arch/mmc_host_def.h>
  28 #include <asm/arch/sys_proto.h>
  29 #include <asm/io.h>
  30 #include <asm/omap_common.h>
  31 #include <asm/emif.h>
  32 #include <asm/gpio.h>
  33 #include <i2c.h>
  34 #include <miiphy.h>
  35 #include <cpsw.h>
  36
  37 DECLARE_GLOBAL_DATA_PTR;
  38
  39 struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
  40 struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
  41
  42 static const struct gpio_bank gpio_bank_am33xx[4] = {
  43         { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
  44         { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
  45         { (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX },
  46         { (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX },
  47 };
  48
  49 const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
  50
  51 /* MII mode defines */
  52 #define MII_MODE_ENABLE         0x0
  53 #define RGMII_MODE_ENABLE       0xA
  54
  55 /* GPIO that controls power to DDR on EVM-SK */
  56 #define GPIO_DDR_VTT_EN         7
  57
  58 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
  59
  60 static struct am335x_baseboard_id __attribute__((section (".data"))) header;
  61
  62 static inline int board_is_bone(void)
  63 {
  64         return !strncmp(header.name, "A335BONE", HDR_NAME_LEN);
  65 }
  66
  67 static inline int board_is_evm_sk(void)
  68 {
  69         return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
  70 }
  71
  72 /*
  73  * Read header information from EEPROM into global structure.
  74  */
  75 static int read_eeprom(void)
  76 {
  77         /* Check if baseboard eeprom is available */
  78         if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
  79                 puts("Could not probe the EEPROM; something fundamentally "
  80                         "wrong on the I2C bus.\n");
  81                 return -ENODEV;
  82         }
  83
  84         /* read the eeprom using i2c */
  85         if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header,
  86                                                         sizeof(header))) {
  87                 puts("Could not read the EEPROM; something fundamentally"
  88                         " wrong on the I2C bus.\n");
  89                 return -EIO;
  90         }
  91
  92         if (header.magic != 0xEE3355AA) {
  93                 /*
  94                  * read the eeprom using i2c again,
  95                  * but use only a 1 byte address
  96                  */
  97                 if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1,
  98                                         (uchar *)&header, sizeof(header))) {
  99                         puts("Could not read the EEPROM; something "
 100                                 "fundamentally wrong on the I2C bus.\n");
 101                         return -EIO;
 102                 }
 103
 104                 if (header.magic != 0xEE3355AA) {
 105                         printf("Incorrect magic number (0x%x) in EEPROM\n",
 106                                         header.magic);
 107                         return -EINVAL;
 108                 }
 109         }
 110
 111         return 0;
 112 }
 113
 114 /* UART Defines */
 115 #ifdef CONFIG_SPL_BUILD
 116 #define UART_RESET              (0x1 << 1)
 117 #define UART_CLK_RUNNING_MASK   0x1
 118 #define UART_SMART_IDLE_EN      (0x1 << 0x3)
 119 #endif
 120
 121 /*
 122  * Determine what type of DDR we have.
 123  */
 124 static short inline board_memory_type(void)
 125 {
 126         /* The following boards are known to use DDR3. */
 127         if (board_is_evm_sk())
 128                 return EMIF_REG_SDRAM_TYPE_DDR3;
 129
 130         return EMIF_REG_SDRAM_TYPE_DDR2;
 131 }
 132
 133 /*
 134  * early system init of muxing and clocks.
 135  */
 136 void s_init(void)
 137 {
 138         /* WDT1 is already running when the bootloader gets control
 139          * Disable it to avoid "random" resets
 140          */
 141         writel(0xAAAA, &wdtimer->wdtwspr);
 142         while (readl(&wdtimer->wdtwwps) != 0x0)
 143                 ;
 144         writel(0x5555, &wdtimer->wdtwspr);
 145         while (readl(&wdtimer->wdtwwps) != 0x0)
 146                 ;
 147
 148 #ifdef CONFIG_SPL_BUILD
 149         /* Setup the PLLs and the clocks for the peripherals */
 150         pll_init();
 151
 152         /* UART softreset */
 153         u32 regVal;
 154
 155         enable_uart0_pin_mux();
 156
 157         regVal = readl(&uart_base->uartsyscfg);
 158         regVal |= UART_RESET;
 159         writel(regVal, &uart_base->uartsyscfg);
 160         while ((readl(&uart_base->uartsyssts) &
 161                 UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
 162                 ;
 163
 164         /* Disable smart idle */
 165         regVal = readl(&uart_base->uartsyscfg);
 166         regVal |= UART_SMART_IDLE_EN;
 167         writel(regVal, &uart_base->uartsyscfg);
 168
 169         preloader_console_init();
 170
 171         /* Initalize the board header */
 172         enable_i2c0_pin_mux();
 173         i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 174         if (read_eeprom() < 0)
 175                 puts("Could not get board ID.\n");
 176
 177         enable_board_pin_mux(&header);
 178         if (board_is_evm_sk()) {
 179                 /*
 180                  * EVM SK 1.2A and later use gpio0_7 to enable DDR3.
 181                  * This is safe enough to do on older revs.
 182                  */
 183                 gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
 184                 gpio_direction_output(GPIO_DDR_VTT_EN, 1);
 185         }
 186
 187         config_ddr(board_memory_type());
 188 #endif
 189 }
 190
 191 #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
 192 int board_mmc_init(bd_t *bis)
 193 {
 194         int ret;
 195
 196         ret = omap_mmc_init(0, 0, 0);
 197         if (ret)
 198                 return ret;
 199
 200         return omap_mmc_init(1, 0, 0);
 201 }
 202 #endif
 203
 204 void setup_clocks_for_console(void)
 205 {
 206         /* Not yet implemented */
 207         return;
 208 }
 209
 210 /*
 211  * Basic board specific setup.  Pinmux has been handled already.
 212  */
 213 int board_init(void)
 214 {
 215         i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 216         if (read_eeprom() < 0)
 217                 puts("Could not get board ID.\n");
 218
 219         gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
 220
 221         return 0;
 222 }
 223
 224 #ifdef CONFIG_DRIVER_TI_CPSW
 225 static void cpsw_control(int enabled)
 226 {
 227         /* VTP can be added here */
 228
 229         return;
 230 }
 231
 232 static struct cpsw_slave_data cpsw_slaves[] = {
 233         {
 234                 .slave_reg_ofs  = 0x208,
 235                 .sliver_reg_ofs = 0xd80,
 236                 .phy_id         = 0,
 237         },
 238         {
 239                 .slave_reg_ofs  = 0x308,
 240                 .sliver_reg_ofs = 0xdc0,
 241                 .phy_id         = 1,
 242         },
 243 };
 244
 245 static struct cpsw_platform_data cpsw_data = {
 246         .mdio_base              = AM335X_CPSW_MDIO_BASE,
 247         .cpsw_base              = AM335X_CPSW_BASE,
 248         .mdio_div               = 0xff,
 249         .channels               = 8,
 250         .cpdma_reg_ofs          = 0x800,
 251         .slaves                 = 1,
 252         .slave_data             = cpsw_slaves,
 253         .ale_reg_ofs            = 0xd00,
 254         .ale_entries            = 1024,
 255         .host_port_reg_ofs      = 0x108,
 256         .hw_stats_reg_ofs       = 0x900,
 257         .mac_control            = (1 << 5),
 258         .control                = cpsw_control,
 259         .host_port_num          = 0,
 260         .version                = CPSW_CTRL_VERSION_2,
 261 };
 262
 263 int board_eth_init(bd_t *bis)
 264 {
 265         uint8_t mac_addr[6];
 266         uint32_t mac_hi, mac_lo;
 267
 268         if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
 269                 debug("<ethaddr> not set. Reading from E-fuse\n");
 270                 /* try reading mac address from efuse */
 271                 mac_lo = readl(&cdev->macid0l);
 272                 mac_hi = readl(&cdev->macid0h);
 273                 mac_addr[0] = mac_hi & 0xFF;
 274                 mac_addr[1] = (mac_hi & 0xFF00) >> 8;
 275                 mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
 276                 mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
 277                 mac_addr[4] = mac_lo & 0xFF;
 278                 mac_addr[5] = (mac_lo & 0xFF00) >> 8;
 279
 280                 if (is_valid_ether_addr(mac_addr))
 281                         eth_setenv_enetaddr("ethaddr", mac_addr);
 282                 else
 283                         return -1;
 284         }
 285
 286         if (board_is_bone()) {
 287                 writel(MII_MODE_ENABLE, &cdev->miisel);
 288                 cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
 289                                 PHY_INTERFACE_MODE_MII;
 290         } else {
 291                 writel(RGMII_MODE_ENABLE, &cdev->miisel);
 292                 cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
 293                                 PHY_INTERFACE_MODE_RGMII;
 294         }
 295
 296         return cpsw_register(&cpsw_data);
 297 }
 298 #endif