arch/powerpc/cpu/mpc85xx/cpu_init.c

   1 /*
   2  * Copyright 2007-2011 Freescale Semiconductor, Inc.
   3  *
   4  * (C) Copyright 2003 Motorola Inc.
   5  * Modified by Xianghua Xiao, X.Xiao@motorola.com
   6  *
   7  * (C) Copyright 2000
   8  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #include <common.h>
  14 #include <watchdog.h>
  15 #include <asm/processor.h>
  16 #include <ioports.h>
  17 #include <sata.h>
  18 #include <fm_eth.h>
  19 #include <asm/io.h>
  20 #include <asm/cache.h>
  21 #include <asm/mmu.h>
  22 #include <asm/fsl_errata.h>
  23 #include <asm/fsl_law.h>
  24 #include <asm/fsl_serdes.h>
  25 #include <asm/fsl_srio.h>
  26 #include <fsl_usb.h>
  27 #include <hwconfig.h>
  28 #include <linux/compiler.h>
  29 #include "mp.h"
  30 #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
  31 #include <nand.h>
  32 #include <errno.h>
  33 #endif
  34
  35 #include "../../../../drivers/block/fsl_sata.h"
  36 #ifdef CONFIG_U_QE
  37 #include "../../../../drivers/qe/qe.h"
  38 #endif
  39
  40 DECLARE_GLOBAL_DATA_PTR;
  41
  42 #ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
  43 /*
  44  * For deriving usb clock from 100MHz sysclk, reference divisor is set
  45  * to a value of 5, which gives an intermediate value 20(100/5). The
  46  * multiplication factor integer is set to 24, which when multiplied to
  47  * above intermediate value provides clock for usb ip.
  48  */
  49 void usb_single_source_clk_configure(struct ccsr_usb_phy *usb_phy)
  50 {
  51         sys_info_t sysinfo;
  52
  53         get_sys_info(&sysinfo);
  54         if (sysinfo.diff_sysclk == 1) {
  55                 clrbits_be32(&usb_phy->pllprg[1],
  56                              CONFIG_SYS_FSL_USB_PLLPRG2_MFI);
  57                 setbits_be32(&usb_phy->pllprg[1],
  58                              CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV_INTERNAL_CLK |
  59                              CONFIG_SYS_FSL_USB_PLLPRG2_MFI_INTERNAL_CLK |
  60                              CONFIG_SYS_FSL_USB_INTERNAL_SOC_CLK_EN);
  61                 }
  62 }
  63 #endif
  64
  65 #ifdef CONFIG_SYS_FSL_ERRATUM_A006261
  66 void fsl_erratum_a006261_workaround(struct ccsr_usb_phy __iomem *usb_phy)
  67 {
  68 #ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
  69         u32 xcvrprg = in_be32(&usb_phy->port1.xcvrprg);
  70
  71         /* Increase Disconnect Threshold by 50mV */
  72         xcvrprg &= ~CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
  73                                                 INC_DCNT_THRESHOLD_50MV;
  74         /* Enable programming of USB High speed Disconnect threshold */
  75         xcvrprg |= CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
  76         out_be32(&usb_phy->port1.xcvrprg, xcvrprg);
  77
  78         xcvrprg = in_be32(&usb_phy->port2.xcvrprg);
  79         /* Increase Disconnect Threshold by 50mV */
  80         xcvrprg &= ~CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
  81                                                 INC_DCNT_THRESHOLD_50MV;
  82         /* Enable programming of USB High speed Disconnect threshold */
  83         xcvrprg |= CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
  84         out_be32(&usb_phy->port2.xcvrprg, xcvrprg);
  85 #else
  86
  87         u32 temp = 0;
  88         u32 status = in_be32(&usb_phy->status1);
  89
  90         u32 squelch_prog_rd_0_2 =
  91                 (status >> CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_0)
  92                         & CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK;
  93
  94         u32 squelch_prog_rd_3_5 =
  95                 (status >> CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_3)
  96                         & CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK;
  97
  98         setbits_be32(&usb_phy->config1,
  99                      CONFIG_SYS_FSL_USB_HS_DISCNCT_INC);
 100         setbits_be32(&usb_phy->config2,
 101                      CONFIG_SYS_FSL_USB_RX_AUTO_CAL_RD_WR_SEL);
 102
 103         temp = squelch_prog_rd_0_2 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_0;
 104         out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
 105
 106         temp = squelch_prog_rd_3_5 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_3;
 107         out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
 108 #endif
 109 }
 110 #endif
 111
 112
 113 #if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
 114 extern qe_iop_conf_t qe_iop_conf_tab[];
 115 extern void qe_config_iopin(u8 port, u8 pin, int dir,
 116                                 int open_drain, int assign);
 117 extern void qe_init(uint qe_base);
 118 extern void qe_reset(void);
 119
 120 static void config_qe_ioports(void)
 121 {
 122         u8      port, pin;
 123         int     dir, open_drain, assign;
 124         int     i;
 125
 126         for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
 127                 port            = qe_iop_conf_tab[i].port;
 128                 pin             = qe_iop_conf_tab[i].pin;
 129                 dir             = qe_iop_conf_tab[i].dir;
 130                 open_drain      = qe_iop_conf_tab[i].open_drain;
 131                 assign          = qe_iop_conf_tab[i].assign;
 132                 qe_config_iopin(port, pin, dir, open_drain, assign);
 133         }
 134 }
 135 #endif
 136
 137 #ifdef CONFIG_CPM2
 138 void config_8560_ioports (volatile ccsr_cpm_t * cpm)
 139 {
 140         int portnum;
 141
 142         for (portnum = 0; portnum < 4; portnum++) {
 143                 uint pmsk = 0,
 144                      ppar = 0,
 145                      psor = 0,
 146                      pdir = 0,
 147                      podr = 0,
 148                      pdat = 0;
 149                 iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
 150                 iop_conf_t *eiopc = iopc + 32;
 151                 uint msk = 1;
 152
 153                 /*
 154                  * NOTE:
 155                  * index 0 refers to pin 31,
 156                  * index 31 refers to pin 0
 157                  */
 158                 while (iopc < eiopc) {
 159                         if (iopc->conf) {
 160                                 pmsk |= msk;
 161                                 if (iopc->ppar)
 162                                         ppar |= msk;
 163                                 if (iopc->psor)
 164                                         psor |= msk;
 165                                 if (iopc->pdir)
 166                                         pdir |= msk;
 167                                 if (iopc->podr)
 168                                         podr |= msk;
 169                                 if (iopc->pdat)
 170                                         pdat |= msk;
 171                         }
 172
 173                         msk <<= 1;
 174                         iopc++;
 175                 }
 176
 177                 if (pmsk != 0) {
 178                         volatile ioport_t *iop = ioport_addr (cpm, portnum);
 179                         uint tpmsk = ~pmsk;
 180
 181                         /*
 182                          * the (somewhat confused) paragraph at the
 183                          * bottom of page 35-5 warns that there might
 184                          * be "unknown behaviour" when programming
 185                          * PSORx and PDIRx, if PPARx = 1, so I
 186                          * decided this meant I had to disable the
 187                          * dedicated function first, and enable it
 188                          * last.
 189                          */
 190                         iop->ppar &= tpmsk;
 191                         iop->psor = (iop->psor & tpmsk) | psor;
 192                         iop->podr = (iop->podr & tpmsk) | podr;
 193                         iop->pdat = (iop->pdat & tpmsk) | pdat;
 194                         iop->pdir = (iop->pdir & tpmsk) | pdir;
 195                         iop->ppar |= ppar;
 196                 }
 197         }
 198 }
 199 #endif
 200
 201 #ifdef CONFIG_SYS_FSL_CPC
 202 #if defined(CONFIG_RAMBOOT_PBL) || defined(CONFIG_SYS_CPC_REINIT_F)
 203 static void disable_cpc_sram(void)
 204 {
 205         int i;
 206
 207         cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
 208
 209         for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
 210                 if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) {
 211                         /* find and disable LAW of SRAM */
 212                         struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR);
 213
 214                         if (law.index == -1) {
 215                                 printf("\nFatal error happened\n");
 216                                 return;
 217                         }
 218                         disable_law(law.index);
 219
 220                         clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS);
 221                         out_be32(&cpc->cpccsr0, 0);
 222                         out_be32(&cpc->cpcsrcr0, 0);
 223                 }
 224         }
 225 }
 226 #endif
 227
 228 static void enable_cpc(void)
 229 {
 230         int i;
 231         u32 size = 0;
 232
 233         cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
 234
 235         for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
 236                 u32 cpccfg0 = in_be32(&cpc->cpccfg0);
 237                 size += CPC_CFG0_SZ_K(cpccfg0);
 238
 239 #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
 240                 setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS);
 241 #endif
 242 #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
 243                 setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS);
 244 #endif
 245 #ifdef CONFIG_SYS_FSL_ERRATUM_A006593
 246                 setbits_be32(&cpc->cpchdbcr0, 1 << (31 - 21));
 247 #endif
 248 #ifdef CONFIG_SYS_FSL_ERRATUM_A006379
 249                 if (has_erratum_a006379()) {
 250                         setbits_be32(&cpc->cpchdbcr0,
 251                                      CPC_HDBCR0_SPLRU_LEVEL_EN);
 252                 }
 253 #endif
 254
 255                 out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
 256                 /* Read back to sync write */
 257                 in_be32(&cpc->cpccsr0);
 258
 259         }
 260
 261         puts("Corenet Platform Cache: ");
 262         print_size(size * 1024, " enabled\n");
 263 }
 264
 265 static void invalidate_cpc(void)
 266 {
 267         int i;
 268         cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
 269
 270         for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
 271                 /* skip CPC when it used as all SRAM */
 272                 if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN)
 273                         continue;
 274                 /* Flash invalidate the CPC and clear all the locks */
 275                 out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC);
 276                 while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC))
 277                         ;
 278         }
 279 }
 280 #else
 281 #define enable_cpc()
 282 #define invalidate_cpc()
 283 #endif /* CONFIG_SYS_FSL_CPC */
 284
 285 /*
 286  * Breathe some life into the CPU...
 287  *
 288  * Set up the memory map
 289  * initialize a bunch of registers
 290  */
 291
 292 #ifdef CONFIG_FSL_CORENET
 293 static void corenet_tb_init(void)
 294 {
 295         volatile ccsr_rcpm_t *rcpm =
 296                 (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
 297         volatile ccsr_pic_t *pic =
 298                 (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
 299         u32 whoami = in_be32(&pic->whoami);
 300
 301         /* Enable the timebase register for this core */
 302         out_be32(&rcpm->ctbenrl, (1 << whoami));
 303 }
 304 #endif
 305
 306 #ifdef CONFIG_SYS_FSL_ERRATUM_A007212
 307 void fsl_erratum_a007212_workaround(void)
 308 {
 309         ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 310         u32 ddr_pll_ratio;
 311         u32 __iomem *plldgdcr1 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c20);
 312         u32 __iomem *plldadcr1 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c28);
 313         u32 __iomem *dpdovrcr4 = (void *)(CONFIG_SYS_DCSRBAR + 0x21e80);
 314 #if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
 315         u32 __iomem *plldgdcr2 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c40);
 316         u32 __iomem *plldadcr2 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c48);
 317 #if (CONFIG_NUM_DDR_CONTROLLERS >= 3)
 318         u32 __iomem *plldgdcr3 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c60);
 319         u32 __iomem *plldadcr3 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c68);
 320 #endif
 321 #endif
 322         /*
 323          * Even this workaround applies to selected version of SoCs, it is
 324          * safe to apply to all versions, with the limitation of odd ratios.
 325          * If RCW has disabled DDR PLL, we have to apply this workaround,
 326          * otherwise DDR will not work.
 327          */
 328         ddr_pll_ratio = (in_be32(&gur->rcwsr[0]) >>
 329                 FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT) &
 330                 FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
 331         /* check if RCW sets ratio to 0, required by this workaround */
 332         if (ddr_pll_ratio != 0)
 333                 return;
 334         ddr_pll_ratio = (in_be32(&gur->rcwsr[0]) >>
 335                 FSL_CORENET_RCWSR0_MEM_PLL_RAT_RESV_SHIFT) &
 336                 FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
 337         /* check if reserved bits have the desired ratio */
 338         if (ddr_pll_ratio == 0) {
 339                 printf("Error: Unknown DDR PLL ratio!\n");
 340                 return;
 341         }
 342         ddr_pll_ratio >>= 1;
 343
 344         setbits_be32(plldadcr1, 0x02000001);
 345 #if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
 346         setbits_be32(plldadcr2, 0x02000001);
 347 #if (CONFIG_NUM_DDR_CONTROLLERS >= 3)
 348         setbits_be32(plldadcr3, 0x02000001);
 349 #endif
 350 #endif
 351         setbits_be32(dpdovrcr4, 0xe0000000);
 352         out_be32(plldgdcr1, 0x08000001 | (ddr_pll_ratio << 1));
 353 #if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
 354         out_be32(plldgdcr2, 0x08000001 | (ddr_pll_ratio << 1));
 355 #if (CONFIG_NUM_DDR_CONTROLLERS >= 3)
 356         out_be32(plldgdcr3, 0x08000001 | (ddr_pll_ratio << 1));
 357 #endif
 358 #endif
 359         udelay(100);
 360         clrbits_be32(plldadcr1, 0x02000001);
 361 #if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
 362         clrbits_be32(plldadcr2, 0x02000001);
 363 #if (CONFIG_NUM_DDR_CONTROLLERS >= 3)
 364         clrbits_be32(plldadcr3, 0x02000001);
 365 #endif
 366 #endif
 367         clrbits_be32(dpdovrcr4, 0xe0000000);
 368 }
 369 #endif
 370
 371 void cpu_init_f (void)
 372 {
 373         extern void m8560_cpm_reset (void);
 374 #ifdef CONFIG_SYS_DCSRBAR_PHYS
 375         ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 376         gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 377 #endif
 378 #if defined(CONFIG_SECURE_BOOT)
 379         struct law_entry law;
 380 #endif
 381 #ifdef CONFIG_MPC8548
 382         ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 383         uint svr = get_svr();
 384
 385         /*
 386          * CPU2 errata workaround: A core hang possible while executing
 387          * a msync instruction and a snoopable transaction from an I/O
 388          * master tagged to make quick forward progress is present.
 389          * Fixed in silicon rev 2.1.
 390          */
 391         if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
 392                 out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16));
 393 #endif
 394
 395         disable_tlb(14);
 396         disable_tlb(15);
 397
 398 #if defined(CONFIG_SECURE_BOOT)
 399         /* Disable the LAW created for NOR flash by the PBI commands */
 400         law = find_law(CONFIG_SYS_PBI_FLASH_BASE);
 401         if (law.index != -1)
 402                 disable_law(law.index);
 403
 404 #if defined(CONFIG_SYS_CPC_REINIT_F)
 405         disable_cpc_sram();
 406 #endif
 407 #endif
 408
 409 #ifdef CONFIG_CPM2
 410         config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
 411 #endif
 412
 413        init_early_memctl_regs();
 414
 415 #if defined(CONFIG_CPM2)
 416         m8560_cpm_reset();
 417 #endif
 418
 419 #if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
 420         /* Config QE ioports */
 421         config_qe_ioports();
 422 #endif
 423
 424 #if defined(CONFIG_FSL_DMA)
 425         dma_init();
 426 #endif
 427 #ifdef CONFIG_FSL_CORENET
 428         corenet_tb_init();
 429 #endif
 430         init_used_tlb_cams();
 431
 432         /* Invalidate the CPC before DDR gets enabled */
 433         invalidate_cpc();
 434
 435  #ifdef CONFIG_SYS_DCSRBAR_PHYS
 436         /* set DCSRCR so that DCSR space is 1G */
 437         setbits_be32(&gur->dcsrcr, FSL_CORENET_DCSR_SZ_1G);
 438         in_be32(&gur->dcsrcr);
 439 #endif
 440
 441 #ifdef CONFIG_SYS_DCSRBAR_PHYS
 442 #ifdef CONFIG_DEEP_SLEEP
 443         /* disable the console if boot from deep sleep */
 444         if (in_be32(&gur->scrtsr[0]) & (1 << 3))
 445                 gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
 446 #endif
 447 #endif
 448 #ifdef CONFIG_SYS_FSL_ERRATUM_A007212
 449         fsl_erratum_a007212_workaround();
 450 #endif
 451
 452 }
 453
 454 /* Implement a dummy function for those platforms w/o SERDES */
 455 static void __fsl_serdes__init(void)
 456 {
 457         return ;
 458 }
 459 __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
 460
 461 #if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
 462 int enable_cluster_l2(void)
 463 {
 464         int i = 0;
 465         u32 cluster;
 466         ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 467         struct ccsr_cluster_l2 __iomem *l2cache;
 468
 469         cluster = in_be32(&gur->tp_cluster[i].lower);
 470         if (cluster & TP_CLUSTER_EOC)
 471                 return 0;
 472
 473         /* The first cache has already been set up, so skip it */
 474         i++;
 475
 476         /* Look through the remaining clusters, and set up their caches */
 477         do {
 478                 int j, cluster_valid = 0;
 479
 480                 l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
 481
 482                 cluster = in_be32(&gur->tp_cluster[i].lower);
 483
 484                 /* check that at least one core/accel is enabled in cluster */
 485                 for (j = 0; j < 4; j++) {
 486                         u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK;
 487                         u32 type = in_be32(&gur->tp_ityp[idx]);
 488
 489                         if (type & TP_ITYP_AV)
 490                                 cluster_valid = 1;
 491                 }
 492
 493                 if (cluster_valid) {
 494                         /* set stash ID to (cluster) * 2 + 32 + 1 */
 495                         clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
 496
 497                         printf("enable l2 for cluster %d %p\n", i, l2cache);
 498
 499                         out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
 500                         while ((in_be32(&l2cache->l2csr0)
 501                                 & (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
 502                                         ;
 503                         out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE|L2CSR0_L2REP_MODE);
 504                 }
 505                 i++;
 506         } while (!(cluster & TP_CLUSTER_EOC));
 507
 508         return 0;
 509 }
 510 #endif
 511
 512 /*
 513  * Initialize L2 as cache.
 514  *
 515  * The newer 8548, etc, parts have twice as much cache, but
 516  * use the same bit-encoding as the older 8555, etc, parts.
 517  *
 518  */
 519 int cpu_init_r(void)
 520 {
 521         __maybe_unused u32 svr = get_svr();
 522 #ifdef CONFIG_SYS_LBC_LCRR
 523         fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR;
 524 #endif
 525 #ifdef CONFIG_L2_CACHE
 526         ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR;
 527 #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
 528         struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
 529 #endif
 530 #if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
 531         extern int spin_table_compat;
 532         const char *spin;
 533 #endif
 534 #ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
 535         ccsr_sec_t __iomem *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
 536 #endif
 537 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
 538         defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
 539         /*
 540          * CPU22 and NMG_CPU_A011 share the same workaround.
 541          * CPU22 applies to P4080 rev 1.0, 2.0, fixed in 3.0
 542          * NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0
 543          * also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1, both
 544          * fixed in 2.0. NMG_CPU_A011 is activated by default and can
 545          * be disabled by hwconfig with syntax:
 546          *
 547          * fsl_cpu_a011:disable
 548          */
 549         extern int enable_cpu_a011_workaround;
 550 #ifdef CONFIG_SYS_P4080_ERRATUM_CPU22
 551         enable_cpu_a011_workaround = (SVR_MAJ(svr) < 3);
 552 #else
 553         char buffer[HWCONFIG_BUFFER_SIZE];
 554         char *buf = NULL;
 555         int n, res;
 556
 557         n = getenv_f("hwconfig", buffer, sizeof(buffer));
 558         if (n > 0)
 559                 buf = buffer;
 560
 561         res = hwconfig_arg_cmp_f("fsl_cpu_a011", "disable", buf);
 562         if (res > 0)
 563                 enable_cpu_a011_workaround = 0;
 564         else {
 565                 if (n >= HWCONFIG_BUFFER_SIZE) {
 566                         printf("fsl_cpu_a011 was not found. hwconfig variable "
 567                                 "may be too long\n");
 568                 }
 569                 enable_cpu_a011_workaround =
 570                         (SVR_SOC_VER(svr) == SVR_P4080 && SVR_MAJ(svr) < 3) ||
 571                         (SVR_SOC_VER(svr) != SVR_P4080 && SVR_MAJ(svr) < 2);
 572         }
 573 #endif
 574         if (enable_cpu_a011_workaround) {
 575                 flush_dcache();
 576                 mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS));
 577                 sync();
 578         }
 579 #endif
 580 #ifdef CONFIG_SYS_FSL_ERRATUM_A005812
 581         /*
 582          * A-005812 workaround sets bit 32 of SPR 976 for SoCs running
 583          * in write shadow mode. Checking DCWS before setting SPR 976.
 584          */
 585         if (mfspr(L1CSR2) & L1CSR2_DCWS)
 586                 mtspr(SPRN_HDBCR0, (mfspr(SPRN_HDBCR0) | 0x80000000));
 587 #endif
 588
 589 #if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
 590         spin = getenv("spin_table_compat");
 591         if (spin && (*spin == 'n'))
 592                 spin_table_compat = 0;
 593         else
 594                 spin_table_compat = 1;
 595 #endif
 596
 597         puts ("L2:    ");
 598
 599 #if defined(CONFIG_L2_CACHE)
 600         volatile uint cache_ctl;
 601         uint ver;
 602         u32 l2siz_field;
 603
 604         ver = SVR_SOC_VER(svr);
 605
 606         asm("msync;isync");
 607         cache_ctl = l2cache->l2ctl;
 608
 609 #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
 610         if (cache_ctl & MPC85xx_L2CTL_L2E) {
 611                 /* Clear L2 SRAM memory-mapped base address */
 612                 out_be32(&l2cache->l2srbar0, 0x0);
 613                 out_be32(&l2cache->l2srbar1, 0x0);
 614
 615                 /* set MBECCDIS=0, SBECCDIS=0 */
 616                 clrbits_be32(&l2cache->l2errdis,
 617                                 (MPC85xx_L2ERRDIS_MBECC |
 618                                  MPC85xx_L2ERRDIS_SBECC));
 619
 620                 /* set L2E=0, L2SRAM=0 */
 621                 clrbits_be32(&l2cache->l2ctl,
 622                                 (MPC85xx_L2CTL_L2E |
 623                                  MPC85xx_L2CTL_L2SRAM_ENTIRE));
 624         }
 625 #endif
 626
 627         l2siz_field = (cache_ctl >> 28) & 0x3;
 628
 629         switch (l2siz_field) {
 630         case 0x0:
 631                 printf(" unknown size (0x%08x)\n", cache_ctl);
 632                 return -1;
 633                 break;
 634         case 0x1:
 635                 if (ver == SVR_8540 || ver == SVR_8560   ||
 636                     ver == SVR_8541 || ver == SVR_8555) {
 637                         puts("128 KiB ");
 638                         /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 KiBibyte) */
 639                         cache_ctl = 0xc4000000;
 640                 } else {
 641                         puts("256 KiB ");
 642                         cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
 643                 }
 644                 break;
 645         case 0x2:
 646                 if (ver == SVR_8540 || ver == SVR_8560   ||
 647                     ver == SVR_8541 || ver == SVR_8555) {
 648                         puts("256 KiB ");
 649                         /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 KiBibyte) */
 650                         cache_ctl = 0xc8000000;
 651                 } else {
 652                         puts("512 KiB ");
 653                         /* set L2E=1, L2I=1, & L2SRAM=0 */
 654                         cache_ctl = 0xc0000000;
 655                 }
 656                 break;
 657         case 0x3:
 658                 puts("1024 KiB ");
 659                 /* set L2E=1, L2I=1, & L2SRAM=0 */
 660                 cache_ctl = 0xc0000000;
 661                 break;
 662         }
 663
 664         if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
 665                 puts("already enabled");
 666 #if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE)
 667                 u32 l2srbar = l2cache->l2srbar0;
 668                 if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
 669                                 && l2srbar >= CONFIG_SYS_FLASH_BASE) {
 670                         l2srbar = CONFIG_SYS_INIT_L2_ADDR;
 671                         l2cache->l2srbar0 = l2srbar;
 672                         printf(", moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
 673                 }
 674 #endif /* CONFIG_SYS_INIT_L2_ADDR */
 675                 puts("\n");
 676         } else {
 677                 asm("msync;isync");
 678                 l2cache->l2ctl = cache_ctl; /* invalidate & enable */
 679                 asm("msync;isync");
 680                 puts("enabled\n");
 681         }
 682 #elif defined(CONFIG_BACKSIDE_L2_CACHE)
 683         if (SVR_SOC_VER(svr) == SVR_P2040) {
 684                 puts("N/A\n");
 685                 goto skip_l2;
 686         }
 687
 688         u32 l2cfg0 = mfspr(SPRN_L2CFG0);
 689
 690         /* invalidate the L2 cache */
 691         mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC));
 692         while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC))
 693                 ;
 694
 695 #ifdef CONFIG_SYS_CACHE_STASHING
 696         /* set stash id to (coreID) * 2 + 32 + L2 (1) */
 697         mtspr(SPRN_L2CSR1, (32 + 1));
 698 #endif
 699
 700         /* enable the cache */
 701         mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);
 702
 703         if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
 704                 while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
 705                         ;
 706                 print_size((l2cfg0 & 0x3fff) * 64 * 1024, " enabled\n");
 707         }
 708
 709 skip_l2:
 710 #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
 711         if (l2cache->l2csr0 & L2CSR0_L2E)
 712                 print_size((l2cache->l2cfg0 & 0x3fff) * 64 * 1024,
 713                            " enabled\n");
 714
 715         enable_cluster_l2();
 716 #else
 717         puts("disabled\n");
 718 #endif
 719
 720 #if defined(CONFIG_RAMBOOT_PBL)
 721         disable_cpc_sram();
 722 #endif
 723         enable_cpc();
 724
 725 #ifndef CONFIG_SYS_FSL_NO_SERDES
 726         /* needs to be in ram since code uses global static vars */
 727         fsl_serdes_init();
 728 #endif
 729
 730 #ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
 731 #define MCFGR_AXIPIPE 0x000000f0
 732         if (IS_SVR_REV(svr, 1, 0))
 733                 clrbits_be32(&sec->mcfgr, MCFGR_AXIPIPE);
 734 #endif
 735
 736 #ifdef CONFIG_SYS_FSL_ERRATUM_A005871
 737         if (IS_SVR_REV(svr, 1, 0)) {
 738                 int i;
 739                 __be32 *p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb004c;
 740
 741                 for (i = 0; i < 12; i++) {
 742                         p += i + (i > 5 ? 11 : 0);
 743                         out_be32(p, 0x2);
 744                 }
 745                 p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb0108;
 746                 out_be32(p, 0x34);
 747         }
 748 #endif
 749
 750 #ifdef CONFIG_SYS_SRIO
 751         srio_init();
 752 #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
 753         char *s = getenv("bootmaster");
 754         if (s) {
 755                 if (!strcmp(s, "SRIO1")) {
 756                         srio_boot_master(1);
 757                         srio_boot_master_release_slave(1);
 758                 }
 759                 if (!strcmp(s, "SRIO2")) {
 760                         srio_boot_master(2);
 761                         srio_boot_master_release_slave(2);
 762                 }
 763         }
 764 #endif
 765 #endif
 766
 767 #if defined(CONFIG_MP)
 768         setup_mp();
 769 #endif
 770
 771 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13
 772         {
 773                 if (SVR_MAJ(svr) < 3) {
 774                         void *p;
 775                         p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
 776                         setbits_be32(p, 1 << (31 - 14));
 777                 }
 778         }
 779 #endif
 780
 781 #ifdef CONFIG_SYS_LBC_LCRR
 782         /*
 783          * Modify the CLKDIV field of LCRR register to improve the writing
 784          * speed for NOR flash.
 785          */
 786         clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR);
 787         __raw_readl(&lbc->lcrr);
 788         isync();
 789 #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
 790         udelay(100);
 791 #endif
 792 #endif
 793
 794 #ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE
 795         {
 796                 struct ccsr_usb_phy __iomem *usb_phy1 =
 797                         (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
 798 #ifdef CONFIG_SYS_FSL_ERRATUM_A006261
 799                 if (has_erratum_a006261())
 800                         fsl_erratum_a006261_workaround(usb_phy1);
 801 #endif
 802                 out_be32(&usb_phy1->usb_enable_override,
 803                                 CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
 804         }
 805 #endif
 806 #ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE
 807         {
 808                 struct ccsr_usb_phy __iomem *usb_phy2 =
 809                         (void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR;
 810 #ifdef CONFIG_SYS_FSL_ERRATUM_A006261
 811                 if (has_erratum_a006261())
 812                         fsl_erratum_a006261_workaround(usb_phy2);
 813 #endif
 814                 out_be32(&usb_phy2->usb_enable_override,
 815                                 CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
 816         }
 817 #endif
 818
 819 #ifdef CONFIG_SYS_FSL_ERRATUM_USB14
 820         /* On P204x/P304x/P50x0 Rev1.0, USB transmit will result internal
 821          * multi-bit ECC errors which has impact on performance, so software
 822          * should disable all ECC reporting from USB1 and USB2.
 823          */
 824         if (IS_SVR_REV(get_svr(), 1, 0)) {
 825                 struct dcsr_dcfg_regs *dcfg = (struct dcsr_dcfg_regs *)
 826                         (CONFIG_SYS_DCSRBAR + CONFIG_SYS_DCSR_DCFG_OFFSET);
 827                 setbits_be32(&dcfg->ecccr1,
 828                                 (DCSR_DCFG_ECC_DISABLE_USB1 |
 829                                  DCSR_DCFG_ECC_DISABLE_USB2));
 830         }
 831 #endif
 832
 833 #if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
 834                 struct ccsr_usb_phy __iomem *usb_phy =
 835                         (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
 836                 setbits_be32(&usb_phy->pllprg[1],
 837                              CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN |
 838                              CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN |
 839                              CONFIG_SYS_FSL_USB_PLLPRG2_MFI |
 840                              CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN);
 841 #ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
 842                 usb_single_source_clk_configure(usb_phy);
 843 #endif
 844                 setbits_be32(&usb_phy->port1.ctrl,
 845                              CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
 846                 setbits_be32(&usb_phy->port1.drvvbuscfg,
 847                              CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
 848                 setbits_be32(&usb_phy->port1.pwrfltcfg,
 849                              CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
 850                 setbits_be32(&usb_phy->port2.ctrl,
 851                              CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
 852                 setbits_be32(&usb_phy->port2.drvvbuscfg,
 853                              CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
 854                 setbits_be32(&usb_phy->port2.pwrfltcfg,
 855                              CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
 856
 857 #ifdef CONFIG_SYS_FSL_ERRATUM_A006261
 858                 if (has_erratum_a006261())
 859                         fsl_erratum_a006261_workaround(usb_phy);
 860 #endif
 861
 862 #endif /* CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE */
 863
 864 #ifdef CONFIG_FMAN_ENET
 865         fman_enet_init();
 866 #endif
 867
 868 #if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
 869         /*
 870          * For P1022/1013 Rev1.0 silicon, after power on SATA host
 871          * controller is configured in legacy mode instead of the
 872          * expected enterprise mode. Software needs to clear bit[28]
 873          * of HControl register to change to enterprise mode from
 874          * legacy mode.  We assume that the controller is offline.
 875          */
 876         if (IS_SVR_REV(svr, 1, 0) &&
 877             ((SVR_SOC_VER(svr) == SVR_P1022) ||
 878              (SVR_SOC_VER(svr) == SVR_P1013))) {
 879                 fsl_sata_reg_t *reg;
 880
 881                 /* first SATA controller */
 882                 reg = (void *)CONFIG_SYS_MPC85xx_SATA1_ADDR;
 883                 clrbits_le32(&reg->hcontrol, HCONTROL_ENTERPRISE_EN);
 884
 885                 /* second SATA controller */
 886                 reg = (void *)CONFIG_SYS_MPC85xx_SATA2_ADDR;
 887                 clrbits_le32(&reg->hcontrol, HCONTROL_ENTERPRISE_EN);
 888         }
 889 #endif
 890
 891
 892         return 0;
 893 }
 894
 895 void arch_preboot_os(void)
 896 {
 897         u32 msr;
 898
 899         /*
 900          * We are changing interrupt offsets and are about to boot the OS so
 901          * we need to make sure we disable all async interrupts. EE is already
 902          * disabled by the time we get called.
 903          */
 904         msr = mfmsr();
 905         msr &= ~(MSR_ME|MSR_CE);
 906         mtmsr(msr);
 907 }
 908
 909 #if defined(CONFIG_CMD_SATA) && defined(CONFIG_FSL_SATA)
 910 int sata_initialize(void)
 911 {
 912         if (is_serdes_configured(SATA1) || is_serdes_configured(SATA2))
 913                 return __sata_initialize();
 914
 915         return 1;
 916 }
 917 #endif
 918
 919 void cpu_secondary_init_r(void)
 920 {
 921 #ifdef CONFIG_U_QE
 922         uint qe_base = CONFIG_SYS_IMMR + 0x00140000; /* QE immr base */
 923 #elif defined CONFIG_QE
 924         uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
 925 #endif
 926
 927 #ifdef CONFIG_QE
 928         qe_init(qe_base);
 929         qe_reset();
 930 #endif
 931 }