board/altera/socfpga/pinmux_config.h

   1 /* This file is generated by Preloader Generator */
   2
   3 #ifndef _PRELOADER_PINMUX_CONFIG_H_
   4 #define _PRELOADER_PINMUX_CONFIG_H_
   5
   6 /*
   7  * State of enabling for which IP connected out through the muxing.
   8  * Value 1 mean the IP connection is muxed out
   9  */
  10 #define CONFIG_HPS_EMAC0                (0)
  11 #define CONFIG_HPS_EMAC1                (1)
  12 #define CONFIG_HPS_USB0                 (0)
  13 #define CONFIG_HPS_USB1                 (1)
  14 #define CONFIG_HPS_NAND                 (0)
  15 #define CONFIG_HPS_SDMMC                (1)
  16 #define CONFIG_HPS_QSPI                 (1)
  17 #define CONFIG_HPS_UART0                (1)
  18 #define CONFIG_HPS_UART1                (0)
  19 #define CONFIG_HPS_TRACE                (1)
  20 #define CONFIG_HPS_I2C0                 (1)
  21 #define CONFIG_HPS_I2C1                 (0)
  22 #define CONFIG_HPS_I2C2                 (0)
  23 #define CONFIG_HPS_I2C3                 (0)
  24 #define CONFIG_HPS_SPIM0                (1)
  25 #define CONFIG_HPS_SPIM1                (0)
  26 #define CONFIG_HPS_SPIS0                (0)
  27 #define CONFIG_HPS_SPIS1                (0)
  28 #define CONFIG_HPS_CAN0                 (1)
  29 #define CONFIG_HPS_CAN1                 (0)
  30
  31 /* IP attribute value (which affected by pin muxing configuration) */
  32 #define CONFIG_HPS_SDMMC_BUSWIDTH       (4)
  33
  34 /* 1 if the pins are connected out */
  35 #define CONFIG_HPS_QSPI_CS0             (1)
  36 #define CONFIG_HPS_QSPI_CS1             (0)
  37 #define CONFIG_HPS_QSPI_CS2             (0)
  38 #define CONFIG_HPS_QSPI_CS3             (0)
  39
  40 /* UART */
  41 /* 1 means the pin is mux out or available */
  42 #define CONFIG_HPS_UART0_TX             (1)
  43 #define CONFIG_HPS_UART0_RX             (1)
  44 #define CONFIG_HPS_UART0_CTS            (0)
  45 #define CONFIG_HPS_UART0_RTS            (0)
  46 #define CONFIG_HPS_UART1_TX             (0)
  47 #define CONFIG_HPS_UART1_RX             (0)
  48 #define CONFIG_HPS_UART1_CTS            (0)
  49 #define CONFIG_HPS_UART1_RTS            (0)
  50
  51 /* Pin mux data */
  52 #define CONFIG_HPS_PINMUX_NUM           (207)
  53
  54 #endif /* _PRELOADER_PINMUX_CONFIG_H_ */