board/karo/tx51/tx51.c

   1 /*
   2  * Copyright (C) 2011-2013 Lothar Waßmann <LW@KARO-electronics.de>
   3  * based on: board/freescale/mx28_evk.c (C) 2010 Freescale Semiconductor, Inc.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * version 2 as published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  */
  18
  19 #include <common.h>
  20 #include <errno.h>
  21 #include <libfdt.h>
  22 #include <fdt_support.h>
  23 #include <lcd.h>
  24 #include <netdev.h>
  25 #include <mmc.h>
  26 #include <fsl_esdhc.h>
  27 #include <video_fb.h>
  28 #include <ipu.h>
  29 #include <mxcfb.h>
  30 #include <linux/fb.h>
  31 #include <asm/io.h>
  32 #include <asm/gpio.h>
  33 #include <asm/arch/iomux-mx51.h>
  34 #include <asm/arch/clock.h>
  35 #include <asm/arch/imx-regs.h>
  36 #include <asm/arch/crm_regs.h>
  37 #include <asm/arch/sys_proto.h>
  38
  39 #include "../common/karo.h"
  40
  41 #define TX51_FEC_RST_GPIO       IMX_GPIO_NR(2, 14)
  42 #define TX51_FEC_PWR_GPIO       IMX_GPIO_NR(1, 3)
  43 #define TX51_FEC_INT_GPIO       IMX_GPIO_NR(3, 18)
  44 #define TX51_LED_GPIO           IMX_GPIO_NR(4, 10)
  45
  46 #define TX51_LCD_PWR_GPIO       IMX_GPIO_NR(4, 14)
  47 #define TX51_LCD_RST_GPIO       IMX_GPIO_NR(4, 13)
  48 #define TX51_LCD_BACKLIGHT_GPIO IMX_GPIO_NR(1, 2)
  49
  50 #define TX51_RESET_OUT_GPIO     IMX_GPIO_NR(2, 15)
  51
  52 DECLARE_GLOBAL_DATA_PTR;
  53
  54 #define IOMUX_SION              IOMUX_PAD(0, 0, IOMUX_CONFIG_SION, 0, 0, 0)
  55
  56 #define FEC_PAD_CTRL            MUX_PAD_CTRL(PAD_CTL_DVS | PAD_CTL_DSE_HIGH | \
  57                                         PAD_CTL_SRE_FAST)
  58 #define FEC_PAD_CTRL2           MUX_PAD_CTRL(PAD_CTL_DVS | PAD_CTL_SRE_FAST)
  59 #define GPIO_PAD_CTRL           MUX_PAD_CTRL(PAD_CTL_DVS | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP)
  60
  61 static iomux_v3_cfg_t tx51_pads[] = {
  62         /* NAND flash pads are set up in lowlevel_init.S */
  63
  64         /* RESET_OUT */
  65         MX51_PAD_EIM_A21__GPIO2_15 | GPIO_PAD_CTRL,
  66
  67         /* UART pads */
  68 #if CONFIG_MXC_UART_BASE == UART1_BASE
  69         MX51_PAD_UART1_RXD__UART1_RXD,
  70         MX51_PAD_UART1_TXD__UART1_TXD,
  71         MX51_PAD_UART1_RTS__UART1_RTS,
  72         MX51_PAD_UART1_CTS__UART1_CTS,
  73 #endif
  74 #if CONFIG_MXC_UART_BASE == UART2_BASE
  75         MX51_PAD_UART2_RXD__UART2_RXD,
  76         MX51_PAD_UART2_TXD__UART2_TXD,
  77         MX51_PAD_EIM_D26__UART2_RTS,
  78         MX51_PAD_EIM_D25__UART2_CTS,
  79 #endif
  80 #if CONFIG_MXC_UART_BASE == UART3_BASE
  81         MX51_PAD_UART3_RXD__UART3_RXD,
  82         MX51_PAD_UART3_TXD__UART3_TXD,
  83         MX51_PAD_EIM_D18__UART3_RTS,
  84         MX51_PAD_EIM_D17__UART3_CTS,
  85 #endif
  86         /* internal I2C */
  87         MX51_PAD_I2C1_DAT__GPIO4_17 | IOMUX_SION,
  88         MX51_PAD_I2C1_CLK__GPIO4_16 | IOMUX_SION,
  89
  90         /* FEC PHY GPIO functions */
  91         MX51_PAD_GPIO1_3__GPIO1_3 | GPIO_PAD_CTRL,    /* PHY POWER */
  92         MX51_PAD_EIM_A20__GPIO2_14 | GPIO_PAD_CTRL,   /* PHY RESET */
  93         MX51_PAD_NANDF_CS2__GPIO3_18 | GPIO_PAD_CTRL, /* PHY INT */
  94
  95         /* FEC functions */
  96         MX51_PAD_NANDF_CS3__FEC_MDC | FEC_PAD_CTRL,
  97         MX51_PAD_EIM_EB2__FEC_MDIO | FEC_PAD_CTRL,
  98         MX51_PAD_NANDF_D11__FEC_RX_DV | FEC_PAD_CTRL2,
  99         MX51_PAD_EIM_CS4__FEC_RX_ER | FEC_PAD_CTRL2,
 100         MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK | FEC_PAD_CTRL2,
 101         MX51_PAD_NANDF_CS7__FEC_TX_EN | FEC_PAD_CTRL,
 102         MX51_PAD_NANDF_D8__FEC_TDATA0 | FEC_PAD_CTRL,
 103         MX51_PAD_NANDF_CS4__FEC_TDATA1 | FEC_PAD_CTRL,
 104         MX51_PAD_NANDF_CS5__FEC_TDATA2 | FEC_PAD_CTRL,
 105         MX51_PAD_NANDF_CS6__FEC_TDATA3 | FEC_PAD_CTRL,
 106
 107         /* strap pins for PHY configuration */
 108         MX51_PAD_NANDF_RB3__GPIO3_11 | GPIO_PAD_CTRL, /* RX_CLK/REGOFF */
 109         MX51_PAD_NANDF_D9__GPIO3_31 | GPIO_PAD_CTRL,  /* RXD0/Mode0 */
 110         MX51_PAD_EIM_EB3__GPIO2_23 | GPIO_PAD_CTRL,   /* RXD1/Mode1 */
 111         MX51_PAD_EIM_CS2__GPIO2_27 | GPIO_PAD_CTRL,   /* RXD2/Mode2 */
 112         MX51_PAD_EIM_CS3__GPIO2_28 | GPIO_PAD_CTRL,   /* RXD3/nINTSEL */
 113         MX51_PAD_NANDF_RB2__GPIO3_10 | GPIO_PAD_CTRL, /* COL/RMII/CRSDV */
 114         MX51_PAD_EIM_CS5__GPIO2_30 | GPIO_PAD_CTRL,   /* CRS/PHYAD4 */
 115
 116         /* unusable pins on TX51 */
 117         MX51_PAD_GPIO1_0__GPIO1_0,
 118         MX51_PAD_GPIO1_1__GPIO1_1,
 119 };
 120
 121 static const struct gpio tx51_gpios[] = {
 122         /* RESET_OUT */
 123         { TX51_RESET_OUT_GPIO, GPIOF_OUTPUT_INIT_LOW, "RESET_OUT", },
 124
 125         /* FEC PHY control GPIOs */
 126         { TX51_FEC_PWR_GPIO, GPIOF_OUTPUT_INIT_LOW, "FEC POWER", }, /* PHY POWER */
 127         { TX51_FEC_RST_GPIO, GPIOF_OUTPUT_INIT_LOW, "FEC RESET", }, /* PHY RESET */
 128         { TX51_FEC_INT_GPIO, GPIOF_INPUT, "FEC PHY INT", },         /* PHY INT (TX_ER) */
 129
 130         /* FEC PHY strap pins */
 131         { IMX_GPIO_NR(3, 11), GPIOF_OUTPUT_INIT_LOW, "FEC PHY REGOFF", },  /* RX_CLK/REGOFF */
 132         { IMX_GPIO_NR(3, 31), GPIOF_OUTPUT_INIT_LOW, "FEC PHY MODE0", },   /* RXD0/Mode0 */
 133         { IMX_GPIO_NR(2, 23), GPIOF_OUTPUT_INIT_LOW, "FEC PHY MODE1", },   /* RXD1/Mode1 */
 134         { IMX_GPIO_NR(2, 27), GPIOF_OUTPUT_INIT_LOW, "FEC PHY MODE2", },   /* RXD2/Mode2 */
 135         { IMX_GPIO_NR(2, 28), GPIOF_OUTPUT_INIT_LOW, "FEC PHY nINTSEL", }, /* RXD3/nINTSEL */
 136         { IMX_GPIO_NR(3, 10), GPIOF_OUTPUT_INIT_LOW, "FEC PHY RMII", },    /* COL/RMII/CRSDV */
 137         { IMX_GPIO_NR(2, 30), GPIOF_OUTPUT_INIT_LOW, "FEC PHY PHYAD4", },  /* CRS/PHYAD4 */
 138
 139         /* module internal I2C bus */
 140         { IMX_GPIO_NR(4, 17), GPIOF_INPUT, "I2C1 SDA", },
 141         { IMX_GPIO_NR(4, 16), GPIOF_INPUT, "I2C1 SCL", },
 142
 143         /* Unconnected pins */
 144         { IMX_GPIO_NR(1, 0), GPIOF_OUTPUT_INIT_LOW, "N/C", },
 145         { IMX_GPIO_NR(1, 1), GPIOF_OUTPUT_INIT_LOW, "N/C", },
 146 };
 147
 148 /*
 149  * Functions
 150  */
 151 /* placed in section '.data' to prevent overwriting relocation info
 152  * overlayed with bss
 153  */
 154 static u32 wrsr __attribute__((section(".data")));
 155
 156 #define WRSR_POR        (1 << 4)
 157 #define WRSR_TOUT       (1 << 1)
 158 #define WRSR_SFTW       (1 << 0)
 159
 160 static void print_reset_cause(void)
 161 {
 162         struct src *src_regs = (struct src *)SRC_BASE_ADDR;
 163         void __iomem *wdt_base = (void __iomem *)WDOG1_BASE_ADDR;
 164         u32 srsr;
 165         char *dlm = "";
 166
 167         printf("Reset cause: ");
 168
 169         srsr = readl(&src_regs->srsr);
 170         wrsr = readw(wdt_base + 4);
 171
 172         if (wrsr & WRSR_POR) {
 173                 printf("%sPOR", dlm);
 174                 dlm = " | ";
 175         }
 176         if (srsr & 0x00004) {
 177                 printf("%sCSU", dlm);
 178                 dlm = " | ";
 179         }
 180         if (srsr & 0x00008) {
 181                 printf("%sIPP USER", dlm);
 182                 dlm = " | ";
 183         }
 184         if (srsr & 0x00010) {
 185                 if (wrsr & WRSR_SFTW) {
 186                         printf("%sSOFT", dlm);
 187                         dlm = " | ";
 188                 }
 189                 if (wrsr & WRSR_TOUT) {
 190                         printf("%sWDOG", dlm);
 191                         dlm = " | ";
 192                 }
 193         }
 194         if (srsr & 0x00020) {
 195                 printf("%sJTAG HIGH-Z", dlm);
 196                 dlm = " | ";
 197         }
 198         if (srsr & 0x00040) {
 199                 printf("%sJTAG SW", dlm);
 200                 dlm = " | ";
 201         }
 202         if (srsr & 0x10000) {
 203                 printf("%sWARM BOOT", dlm);
 204                 dlm = " | ";
 205         }
 206         if (dlm[0] == '\0')
 207                 printf("unknown");
 208
 209         printf("\n");
 210 }
 211
 212 static void tx51_print_cpuinfo(void)
 213 {
 214         u32 cpurev;
 215
 216         cpurev = get_cpu_rev();
 217
 218         printf("CPU:   Freescale i.MX51 rev%d.%d at %d MHz\n",
 219                 (cpurev & 0x000F0) >> 4,
 220                 (cpurev & 0x0000F) >> 0,
 221                 mxc_get_clock(MXC_ARM_CLK) / 1000000);
 222
 223         print_reset_cause();
 224 }
 225
 226 int board_early_init_f(void)
 227 {
 228         struct mxc_ccm_reg *ccm_regs = (void *)CCM_BASE_ADDR;
 229
 230         gpio_request_array(tx51_gpios, ARRAY_SIZE(tx51_gpios));
 231         imx_iomux_v3_setup_multiple_pads(tx51_pads, ARRAY_SIZE(tx51_pads));
 232
 233         writel(0x77777777, AIPS1_BASE_ADDR + 0x00);
 234         writel(0x77777777, AIPS1_BASE_ADDR + 0x04);
 235
 236         writel(0x00000000, AIPS1_BASE_ADDR + 0x40);
 237         writel(0x00000000, AIPS1_BASE_ADDR + 0x44);
 238         writel(0x00000000, AIPS1_BASE_ADDR + 0x48);
 239         writel(0x00000000, AIPS1_BASE_ADDR + 0x4c);
 240         writel(0x00000000, AIPS1_BASE_ADDR + 0x50);
 241
 242         writel(0x77777777, AIPS2_BASE_ADDR + 0x00);
 243         writel(0x77777777, AIPS2_BASE_ADDR + 0x04);
 244
 245         writel(0x00000000, AIPS2_BASE_ADDR + 0x40);
 246         writel(0x00000000, AIPS2_BASE_ADDR + 0x44);
 247         writel(0x00000000, AIPS2_BASE_ADDR + 0x48);
 248         writel(0x00000000, AIPS2_BASE_ADDR + 0x4c);
 249         writel(0x00000000, AIPS2_BASE_ADDR + 0x50);
 250
 251         writel(0xffcfffff, &ccm_regs->CCGR0);
 252         writel(0x003fffff, &ccm_regs->CCGR1);
 253         writel(0x030c003c, &ccm_regs->CCGR2);
 254         writel(0x000000ff, &ccm_regs->CCGR3);
 255         writel(0x00000000, &ccm_regs->CCGR4);
 256         writel(0x003fc003, &ccm_regs->CCGR5);
 257         writel(0x00000000, &ccm_regs->CCGR6);
 258         writel(0x00000000, &ccm_regs->cmeor);
 259 #ifdef CONFIG_CMD_BOOTCE
 260         /* WinCE fails to enable these clocks */
 261         writel(readl(&ccm_regs->CCGR2) | 0x0c000000, &ccm_regs->CCGR2); /* usboh3_ipg_ahb */
 262         writel(readl(&ccm_regs->CCGR4) | 0x30000000, &ccm_regs->CCGR4); /* srtc */
 263         writel(readl(&ccm_regs->CCGR6) | 0x00000300, &ccm_regs->CCGR6); /* emi_garb */
 264 #endif
 265         return 0;
 266 }
 267
 268 int board_init(void)
 269 {
 270         /* Address of boot parameters */
 271         gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x1000;
 272
 273         if (ctrlc() || (wrsr & WRSR_TOUT)) {
 274                 if (wrsr & WRSR_TOUT)
 275                         printf("WDOG RESET detected\n");
 276                 else
 277                         printf("<CTRL-C> detected; safeboot enabled\n");
 278                 return 1;
 279         }
 280         return 0;
 281 }
 282
 283 int dram_init(void)
 284 {
 285         int ret;
 286
 287         /* dram_init must store complete ramsize in gd->ram_size */
 288         gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
 289                                 PHYS_SDRAM_1_SIZE);
 290
 291         ret = mxc_set_clock(CONFIG_SYS_MX5_HCLK,
 292                 CONFIG_SYS_SDRAM_CLK, MXC_DDR_CLK);
 293         if (ret)
 294                 printf("%s: Failed to set DDR clock to %u MHz: %d\n", __func__,
 295                         CONFIG_SYS_SDRAM_CLK, ret);
 296         else
 297                 debug("%s: DDR clock set to %u.%03u MHz (desig.: %u.000 MHz)\n",
 298                         __func__, mxc_get_clock(MXC_DDR_CLK) / 1000000,
 299                         mxc_get_clock(MXC_DDR_CLK) / 1000 % 1000,
 300                         CONFIG_SYS_SDRAM_CLK);
 301         return ret;
 302 }
 303
 304 void dram_init_banksize(void)
 305 {
 306         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 307         gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1,
 308                         PHYS_SDRAM_1_SIZE);
 309 #if CONFIG_NR_DRAM_BANKS > 1
 310         gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
 311         gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2,
 312                         PHYS_SDRAM_2_SIZE);
 313 #endif
 314 }
 315
 316 #ifdef  CONFIG_CMD_MMC
 317 static const iomux_v3_cfg_t mmc0_pads[] = {
 318         MX51_PAD_SD1_CMD__SD1_CMD,
 319         MX51_PAD_SD1_CLK__SD1_CLK,
 320         MX51_PAD_SD1_DATA0__SD1_DATA0,
 321         MX51_PAD_SD1_DATA1__SD1_DATA1,
 322         MX51_PAD_SD1_DATA2__SD1_DATA2,
 323         MX51_PAD_SD1_DATA3__SD1_DATA3,
 324         /* SD1 CD */
 325         MX51_PAD_DISPB2_SER_RS__GPIO3_8 | GPIO_PAD_CTRL,
 326 };
 327
 328 static const iomux_v3_cfg_t mmc1_pads[] = {
 329         MX51_PAD_SD2_CMD__SD2_CMD,
 330         MX51_PAD_SD2_CLK__SD2_CLK,
 331         MX51_PAD_SD2_DATA0__SD2_DATA0,
 332         MX51_PAD_SD2_DATA1__SD2_DATA1,
 333         MX51_PAD_SD2_DATA2__SD2_DATA2,
 334         MX51_PAD_SD2_DATA3__SD2_DATA3,
 335         /* SD2 CD */
 336         MX51_PAD_DISPB2_SER_DIO__GPIO3_6 | GPIO_PAD_CTRL,
 337 };
 338
 339 static struct tx51_esdhc_cfg {
 340         const iomux_v3_cfg_t *pads;
 341         int num_pads;
 342         struct fsl_esdhc_cfg cfg;
 343         int cd_gpio;
 344 } tx51_esdhc_cfg[] = {
 345         {
 346                 .pads = mmc0_pads,
 347                 .num_pads = ARRAY_SIZE(mmc0_pads),
 348                 .cfg = {
 349                         .esdhc_base = (void __iomem *)MMC_SDHC1_BASE_ADDR,
 350                         .max_bus_width = 4,
 351                 },
 352                 .cd_gpio = IMX_GPIO_NR(3, 8),
 353         },
 354         {
 355                 .pads = mmc1_pads,
 356                 .num_pads = ARRAY_SIZE(mmc1_pads),
 357                 .cfg = {
 358                         .esdhc_base = (void __iomem *)MMC_SDHC2_BASE_ADDR,
 359                         .max_bus_width = 4,
 360                 },
 361                 .cd_gpio = IMX_GPIO_NR(3, 6),
 362         },
 363 };
 364
 365 static inline struct tx51_esdhc_cfg *to_tx51_esdhc_cfg(struct fsl_esdhc_cfg *cfg)
 366 {
 367         return container_of(cfg, struct tx51_esdhc_cfg, cfg);
 368 }
 369
 370 int board_mmc_getcd(struct mmc *mmc)
 371 {
 372         struct tx51_esdhc_cfg *cfg = to_tx51_esdhc_cfg(mmc->priv);
 373
 374         if (cfg->cd_gpio < 0)
 375                 return cfg->cd_gpio;
 376
 377         debug("SD card %d is %spresent\n",
 378                 cfg - tx51_esdhc_cfg,
 379                 gpio_get_value(cfg->cd_gpio) ? "NOT " : "");
 380         return !gpio_get_value(cfg->cd_gpio);
 381 }
 382
 383 int board_mmc_init(bd_t *bis)
 384 {
 385         int i;
 386
 387         for (i = 0; i < ARRAY_SIZE(tx51_esdhc_cfg); i++) {
 388                 struct mmc *mmc;
 389                 struct tx51_esdhc_cfg *cfg = &tx51_esdhc_cfg[i];
 390                 int ret;
 391
 392                 imx_iomux_v3_setup_multiple_pads(cfg->pads,
 393                                                 cfg->num_pads);
 394                 cfg->cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 395
 396                 ret = gpio_request_one(cfg->cd_gpio,
 397                                 GPIOF_INPUT, "MMC CD");
 398                 if (ret) {
 399                         printf("Error %d requesting GPIO%d_%d\n",
 400                                 ret, cfg->cd_gpio / 32, cfg->cd_gpio % 32);
 401                         continue;
 402                 }
 403
 404                 debug("%s: Initializing MMC slot %d\n", __func__, i);
 405                 fsl_esdhc_initialize(bis, &cfg->cfg);
 406
 407                 mmc = find_mmc_device(i);
 408                 if (mmc == NULL)
 409                         continue;
 410                 if (board_mmc_getcd(mmc) > 0)
 411                         mmc_init(mmc);
 412         }
 413         return 0;
 414 }
 415 #endif /* CONFIG_CMD_MMC */
 416
 417 #ifdef CONFIG_FEC_MXC
 418
 419 #ifndef ETH_ALEN
 420 #define ETH_ALEN 6
 421 #endif
 422
 423 void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
 424 {
 425         int i;
 426         struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
 427         struct fuse_bank *bank = &iim->bank[1];
 428         struct fuse_bank1_regs *fuse = (struct fuse_bank1_regs *)bank->fuse_regs;
 429
 430         if (dev_id > 0)
 431                 return;
 432
 433         for (i = 0; i < ETH_ALEN; i++)
 434                 mac[ETH_ALEN - i - 1] = readl(&fuse->mac_addr[i]);
 435 }
 436
 437 static iomux_v3_cfg_t tx51_fec_pads[] = {
 438         /* reconfigure strap pins for FEC function */
 439         MX51_PAD_NANDF_RB3__FEC_RX_CLK | FEC_PAD_CTRL2,
 440         MX51_PAD_NANDF_D9__FEC_RDATA0 | FEC_PAD_CTRL2,
 441         MX51_PAD_EIM_EB3__FEC_RDATA1 | FEC_PAD_CTRL2,
 442         MX51_PAD_EIM_CS2__FEC_RDATA2 | FEC_PAD_CTRL2,
 443         MX51_PAD_EIM_CS3__FEC_RDATA3 | FEC_PAD_CTRL2,
 444         MX51_PAD_NANDF_RB2__FEC_COL | FEC_PAD_CTRL2,
 445         MX51_PAD_EIM_CS5__FEC_CRS | FEC_PAD_CTRL,
 446 };
 447
 448 /* take bit 4 of PHY address from configured PHY address or
 449  * set it to 0 if PHYADDR is -1 (probe for PHY)
 450  */
 451 #define PHYAD4 ((CONFIG_FEC_MXC_PHYADDR >> 4) & !(CONFIG_FEC_MXC_PHYADDR >> 5))
 452
 453 static struct gpio tx51_fec_gpios[] = {
 454         { TX51_FEC_PWR_GPIO, GPIOF_OUTPUT_INIT_HIGH, "FEC PHY POWER", },
 455         { IMX_GPIO_NR(3, 31), GPIOF_OUTPUT_INIT_HIGH, "FEC PHY Mode0", },       /* RXD0/Mode0 */
 456         { IMX_GPIO_NR(2, 23), GPIOF_OUTPUT_INIT_HIGH, "FEC PHY Mode1", },       /* RXD1/Mode1 */
 457         { IMX_GPIO_NR(2, 27), GPIOF_OUTPUT_INIT_HIGH, "FEC PHY Mode2", },       /* RXD2/Mode2 */
 458         { IMX_GPIO_NR(2, 28), GPIOF_OUTPUT_INIT_HIGH, "FEC PHY nINTSEL", },     /* RXD3/nINTSEL */
 459 #if PHYAD4
 460         { IMX_GPIO_NR(2, 30), GPIOF_OUTPUT_INIT_HIGH, "FEC PHY PHYAD4", }, /* CRS/PHYAD4 */
 461 #else
 462         { IMX_GPIO_NR(2, 30), GPIOF_OUTPUT_INIT_LOW, "FEC PHY PHYAD4", }, /* CRS/PHYAD4 */
 463 #endif
 464 };
 465
 466 int board_eth_init(bd_t *bis)
 467 {
 468         int ret;
 469
 470         /* Power up the external phy and assert strap options */
 471         gpio_request_array(tx51_fec_gpios, ARRAY_SIZE(tx51_fec_gpios));
 472
 473         /* delay at least 21ms for the PHY internal POR signal to deassert */
 474         udelay(22000);
 475
 476         /* Deassert RESET to the external phy */
 477         gpio_set_value(TX51_FEC_RST_GPIO, 1);
 478
 479         /* Without this delay the PHY won't work, though nothing in
 480          * the datasheets suggests that it should be necessary!
 481          */
 482         udelay(400);
 483         imx_iomux_v3_setup_multiple_pads(tx51_fec_pads,
 484                                         ARRAY_SIZE(tx51_fec_pads));
 485
 486         ret = cpu_eth_init(bis);
 487         if (ret)
 488                 printf("cpu_eth_init() failed: %d\n", ret);
 489
 490         return ret;
 491 }
 492 #endif /* CONFIG_FEC_MXC */
 493
 494 enum {
 495         LED_STATE_INIT = -1,
 496         LED_STATE_OFF,
 497         LED_STATE_ON,
 498 };
 499
 500 void show_activity(int arg)
 501 {
 502         static int led_state = LED_STATE_INIT;
 503         static ulong last;
 504
 505         if (led_state == LED_STATE_INIT) {
 506                 last = get_timer(0);
 507                 gpio_set_value(TX51_LED_GPIO, 1);
 508                 led_state = LED_STATE_ON;
 509         } else {
 510                 if (get_timer(last) > CONFIG_SYS_HZ) {
 511                         last = get_timer(0);
 512                         if (led_state == LED_STATE_ON) {
 513                                 gpio_set_value(TX51_LED_GPIO, 0);
 514                         } else {
 515                                 gpio_set_value(TX51_LED_GPIO, 1);
 516                         }
 517                         led_state = 1 - led_state;
 518                 }
 519         }
 520 }
 521
 522 static const iomux_v3_cfg_t stk5_pads[] = {
 523         /* SW controlled LED on STK5 baseboard */
 524         MX51_PAD_CSI2_D13__GPIO4_10 | GPIO_PAD_CTRL,
 525
 526         /* USB PHY reset */
 527         MX51_PAD_GPIO1_4__GPIO1_4 | GPIO_PAD_CTRL,
 528         /* USBOTG OC */
 529         MX51_PAD_GPIO1_6__GPIO1_6 | GPIO_PAD_CTRL,
 530         /* USB PHY clock enable */
 531         MX51_PAD_GPIO1_7__GPIO1_7 | GPIO_PAD_CTRL,
 532         /* USBH1 VBUS enable */
 533         MX51_PAD_GPIO1_8__GPIO1_8 | GPIO_PAD_CTRL,
 534         /* USBH1 OC */
 535         MX51_PAD_GPIO1_9__GPIO1_9 | GPIO_PAD_CTRL,
 536 };
 537
 538 static const struct gpio stk5_gpios[] = {
 539         { TX51_LED_GPIO, GPIOF_OUTPUT_INIT_LOW, "HEARTBEAT LED", },
 540
 541         { IMX_GPIO_NR(1, 4), GPIOF_OUTPUT_INIT_LOW, "ULPI PHY clk enable", },
 542         { IMX_GPIO_NR(1, 6), GPIOF_INPUT, "USBOTG OC", },
 543         { IMX_GPIO_NR(1, 7), GPIOF_OUTPUT_INIT_LOW, "ULPI PHY reset", },
 544         { IMX_GPIO_NR(1, 8), GPIOF_OUTPUT_INIT_LOW, "USBH1 VBUS enable", },
 545         { IMX_GPIO_NR(1, 9), GPIOF_INPUT, "USBH1 OC", },
 546 };
 547
 548 #ifdef CONFIG_LCD
 549 static u16 tx51_cmap[256];
 550 vidinfo_t panel_info = {
 551         /* set to max. size supported by SoC */
 552         .vl_col = 1600,
 553         .vl_row = 1200,
 554
 555         .vl_bpix = LCD_COLOR24,    /* Bits per pixel, 0: 1bpp, 1: 2bpp, 2: 4bpp, 3: 8bpp ... */
 556         .cmap = tx51_cmap,
 557 };
 558
 559 static struct fb_videomode tx51_fb_modes[] = {
 560         {
 561                 /* Standard VGA timing */
 562                 .name           = "VGA",
 563                 .refresh        = 60,
 564                 .xres           = 640,
 565                 .yres           = 480,
 566                 .pixclock       = KHZ2PICOS(25175),
 567                 .left_margin    = 48,
 568                 .hsync_len      = 96,
 569                 .right_margin   = 16,
 570                 .upper_margin   = 31,
 571                 .vsync_len      = 2,
 572                 .lower_margin   = 12,
 573                 .sync           = FB_SYNC_CLK_LAT_FALL,
 574         },
 575         {
 576                 /* Emerging ETV570 640 x 480 display. Syncs low active,
 577                  * DE high active, 115.2 mm x 86.4 mm display area
 578                  * VGA compatible timing
 579                  */
 580                 .name           = "ETV570",
 581                 .refresh        = 60,
 582                 .xres           = 640,
 583                 .yres           = 480,
 584                 .pixclock       = KHZ2PICOS(25175),
 585                 .left_margin    = 114,
 586                 .hsync_len      = 30,
 587                 .right_margin   = 16,
 588                 .upper_margin   = 32,
 589                 .vsync_len      = 3,
 590                 .lower_margin   = 10,
 591                 .sync           = FB_SYNC_CLK_LAT_FALL,
 592         },
 593         {
 594                 /* Emerging ET0350G0DH6 320 x 240 display.
 595                  * 70.08 mm x 52.56 mm display area.
 596                  */
 597                 .name           = "ET0350",
 598                 .refresh        = 60,
 599                 .xres           = 320,
 600                 .yres           = 240,
 601                 .pixclock       = KHZ2PICOS(6500),
 602                 .left_margin    = 68 - 34,
 603                 .hsync_len      = 34,
 604                 .right_margin   = 20,
 605                 .upper_margin   = 18 - 3,
 606                 .vsync_len      = 3,
 607                 .lower_margin   = 4,
 608                 .sync           = FB_SYNC_CLK_LAT_FALL,
 609         },
 610         {
 611                 /* Emerging ET0430G0DH6 480 x 272 display.
 612                  * 95.04 mm x 53.856 mm display area.
 613                  */
 614                 .name           = "ET0430",
 615                 .refresh        = 60,
 616                 .xres           = 480,
 617                 .yres           = 272,
 618                 .pixclock       = KHZ2PICOS(9000),
 619                 .left_margin    = 2,
 620                 .hsync_len      = 41,
 621                 .right_margin   = 2,
 622                 .upper_margin   = 2,
 623                 .vsync_len      = 10,
 624                 .lower_margin   = 2,
 625                 .sync           = FB_SYNC_CLK_LAT_FALL,
 626         },
 627         {
 628                 /* Emerging ET0500G0DH6 800 x 480 display.
 629                  * 109.6 mm x 66.4 mm display area.
 630                  */
 631                 .name           = "ET0500",
 632                 .refresh        = 60,
 633                 .xres           = 800,
 634                 .yres           = 480,
 635                 .pixclock       = KHZ2PICOS(33260),
 636                 .left_margin    = 216 - 128,
 637                 .hsync_len      = 128,
 638                 .right_margin   = 1056 - 800 - 216,
 639                 .upper_margin   = 35 - 2,
 640                 .vsync_len      = 2,
 641                 .lower_margin   = 525 - 480 - 35,
 642                 .sync           = FB_SYNC_CLK_LAT_FALL,
 643         },
 644         {
 645                 /* Emerging ETQ570G0DH6 320 x 240 display.
 646                  * 115.2 mm x 86.4 mm display area.
 647                  */
 648                 .name           = "ETQ570",
 649                 .refresh        = 60,
 650                 .xres           = 320,
 651                 .yres           = 240,
 652                 .pixclock       = KHZ2PICOS(6400),
 653                 .left_margin    = 38,
 654                 .hsync_len      = 30,
 655                 .right_margin   = 30,
 656                 .upper_margin   = 16, /* 15 according to datasheet */
 657                 .vsync_len      = 3, /* TVP -> 1>x>5 */
 658                 .lower_margin   = 4, /* 4.5 according to datasheet */
 659                 .sync           = FB_SYNC_CLK_LAT_FALL,
 660         },
 661         {
 662                 /* Emerging ET0700G0DH6 800 x 480 display.
 663                  * 152.4 mm x 91.44 mm display area.
 664                  */
 665                 .name           = "ET0700",
 666                 .refresh        = 60,
 667                 .xres           = 800,
 668                 .yres           = 480,
 669                 .pixclock       = KHZ2PICOS(33260),
 670                 .left_margin    = 216 - 128,
 671                 .hsync_len      = 128,
 672                 .right_margin   = 1056 - 800 - 216,
 673                 .upper_margin   = 35 - 2,
 674                 .vsync_len      = 2,
 675                 .lower_margin   = 525 - 480 - 35,
 676                 .sync           = FB_SYNC_CLK_LAT_FALL,
 677         },
 678         {
 679                 /* unnamed entry for assigning parameters parsed from 'video_mode' string */
 680                 .refresh        = 60,
 681                 .left_margin    = 48,
 682                 .hsync_len      = 96,
 683                 .right_margin   = 16,
 684                 .upper_margin   = 31,
 685                 .vsync_len      = 2,
 686                 .lower_margin   = 12,
 687                 .sync           = FB_SYNC_CLK_LAT_FALL,
 688         },
 689 };
 690
 691 static int lcd_enabled = 1;
 692 static int lcd_bl_polarity;
 693
 694 static int lcd_backlight_polarity(void)
 695 {
 696         return lcd_bl_polarity;
 697 }
 698
 699 void lcd_enable(void)
 700 {
 701         /* HACK ALERT:
 702          * global variable from common/lcd.c
 703          * Set to 0 here to prevent messages from going to LCD
 704          * rather than serial console
 705          */
 706         lcd_is_enabled = 0;
 707
 708         if (lcd_enabled) {
 709                 karo_load_splashimage(1);
 710
 711                 debug("Switching LCD on\n");
 712                 gpio_set_value(TX51_LCD_PWR_GPIO, 1);
 713                 udelay(100);
 714                 gpio_set_value(TX51_LCD_RST_GPIO, 1);
 715                 udelay(300000);
 716                 gpio_set_value(TX51_LCD_BACKLIGHT_GPIO,
 717                         lcd_backlight_polarity());
 718         }
 719 }
 720
 721 void lcd_disable(void)
 722 {
 723         if (lcd_enabled) {
 724                 printf("Disabling LCD\n");
 725                 ipuv3_fb_shutdown();
 726         }
 727 }
 728
 729 void lcd_panel_disable(void)
 730 {
 731         if (lcd_enabled) {
 732                 debug("Switching LCD off\n");
 733                 gpio_set_value(TX51_LCD_BACKLIGHT_GPIO,
 734                         !lcd_backlight_polarity());
 735                 gpio_set_value(TX51_LCD_RST_GPIO, 0);
 736                 gpio_set_value(TX51_LCD_PWR_GPIO, 0);
 737         }
 738 }
 739
 740 static const iomux_v3_cfg_t stk5_lcd_pads[] = {
 741         /* LCD RESET */
 742         MX51_PAD_CSI2_VSYNC__GPIO4_13,
 743         /* LCD POWER_ENABLE */
 744         MX51_PAD_CSI2_HSYNC__GPIO4_14,
 745         /* LCD Backlight (PWM) */
 746         MX51_PAD_GPIO1_2__GPIO1_2,
 747
 748         /* Display */
 749         MX51_PAD_DISP1_DAT0__DISP1_DAT0,
 750         MX51_PAD_DISP1_DAT1__DISP1_DAT1,
 751         MX51_PAD_DISP1_DAT2__DISP1_DAT2,
 752         MX51_PAD_DISP1_DAT3__DISP1_DAT3,
 753         MX51_PAD_DISP1_DAT4__DISP1_DAT4,
 754         MX51_PAD_DISP1_DAT5__DISP1_DAT5,
 755         MX51_PAD_DISP1_DAT6__DISP1_DAT6,
 756         MX51_PAD_DISP1_DAT7__DISP1_DAT7,
 757         MX51_PAD_DISP1_DAT8__DISP1_DAT8,
 758         MX51_PAD_DISP1_DAT9__DISP1_DAT9,
 759         MX51_PAD_DISP1_DAT10__DISP1_DAT10,
 760         MX51_PAD_DISP1_DAT11__DISP1_DAT11,
 761         MX51_PAD_DISP1_DAT12__DISP1_DAT12,
 762         MX51_PAD_DISP1_DAT13__DISP1_DAT13,
 763         MX51_PAD_DISP1_DAT14__DISP1_DAT14,
 764         MX51_PAD_DISP1_DAT15__DISP1_DAT15,
 765         MX51_PAD_DISP1_DAT16__DISP1_DAT16,
 766         MX51_PAD_DISP1_DAT17__DISP1_DAT17,
 767         MX51_PAD_DISP1_DAT18__DISP1_DAT18,
 768         MX51_PAD_DISP1_DAT19__DISP1_DAT19,
 769         MX51_PAD_DISP1_DAT20__DISP1_DAT20,
 770         MX51_PAD_DISP1_DAT21__DISP1_DAT21,
 771         MX51_PAD_DISP1_DAT22__DISP1_DAT22,
 772         MX51_PAD_DISP1_DAT23__DISP1_DAT23,
 773         MX51_PAD_DI1_PIN2__DI1_PIN2, /* HSYNC */
 774         MX51_PAD_DI1_PIN3__DI1_PIN3, /* VSYNC */
 775 };
 776
 777 static const struct gpio stk5_lcd_gpios[] = {
 778         { TX51_LCD_RST_GPIO, GPIOF_OUTPUT_INIT_LOW, "LCD RESET", },
 779         { TX51_LCD_PWR_GPIO, GPIOF_OUTPUT_INIT_LOW, "LCD POWER", },
 780         { TX51_LCD_BACKLIGHT_GPIO, GPIOF_OUTPUT_INIT_HIGH, "LCD BACKLIGHT", },
 781 };
 782
 783 void lcd_ctrl_init(void *lcdbase)
 784 {
 785         int color_depth = 24;
 786         const char *video_mode = karo_get_vmode(getenv("video_mode"));
 787         const char *vm;
 788         unsigned long val;
 789         int refresh = 60;
 790         struct fb_videomode *p = &tx51_fb_modes[0];
 791         struct fb_videomode fb_mode;
 792         int xres_set = 0, yres_set = 0, bpp_set = 0, refresh_set = 0;
 793         int pix_fmt;
 794         int lcd_bus_width;
 795         ipu_di_clk_parent_t di_clk_parent = DI_PCLK_PLL3;
 796         unsigned long di_clk_rate = 65000000;
 797
 798         if (!lcd_enabled) {
 799                 debug("LCD disabled\n");
 800                 return;
 801         }
 802
 803         if (had_ctrlc() || (wrsr & WRSR_TOUT)) {
 804                 debug("Disabling LCD\n");
 805                 lcd_enabled = 0;
 806                 setenv("splashimage", NULL);
 807                 return;
 808         }
 809
 810         karo_fdt_move_fdt();
 811         lcd_bl_polarity = karo_fdt_get_backlight_polarity(working_fdt);
 812
 813         if (video_mode == NULL) {
 814                 debug("Disabling LCD\n");
 815                 lcd_enabled = 0;
 816                 return;
 817         }
 818         vm = video_mode;
 819         if (karo_fdt_get_fb_mode(working_fdt, video_mode, &fb_mode) == 0) {
 820                 p = &fb_mode;
 821                 debug("Using video mode from FDT\n");
 822                 vm += strlen(vm);
 823                 if (fb_mode.xres > panel_info.vl_col ||
 824                         fb_mode.yres > panel_info.vl_row) {
 825                         printf("video resolution from DT: %dx%d exceeds hardware limits: %dx%d\n",
 826                                 fb_mode.xres, fb_mode.yres,
 827                                 panel_info.vl_col, panel_info.vl_row);
 828                         lcd_enabled = 0;
 829                         return;
 830                 }
 831         }
 832         if (p->name != NULL)
 833                 debug("Trying compiled-in video modes\n");
 834         while (p->name != NULL) {
 835                 if (strcmp(p->name, vm) == 0) {
 836                         debug("Using video mode: '%s'\n", p->name);
 837                         vm += strlen(vm);
 838                         break;
 839                 }
 840                 p++;
 841         }
 842         if (*vm != '\0')
 843                 debug("Trying to decode video_mode: '%s'\n", vm);
 844         while (*vm != '\0') {
 845                 if (*vm >= '0' && *vm <= '9') {
 846                         char *end;
 847
 848                         val = simple_strtoul(vm, &end, 0);
 849                         if (end > vm) {
 850                                 if (!xres_set) {
 851                                         if (val > panel_info.vl_col)
 852                                                 val = panel_info.vl_col;
 853                                         p->xres = val;
 854                                         panel_info.vl_col = val;
 855                                         xres_set = 1;
 856                                 } else if (!yres_set) {
 857                                         if (val > panel_info.vl_row)
 858                                                 val = panel_info.vl_row;
 859                                         p->yres = val;
 860                                         panel_info.vl_row = val;
 861                                         yres_set = 1;
 862                                 } else if (!bpp_set) {
 863                                         switch (val) {
 864                                         case 8:
 865                                         case 16:
 866                                         case 24:
 867                                         case 32:
 868                                                 color_depth = val;
 869                                                 break;
 870
 871                                         default:
 872                                                 printf("Invalid color depth: '%.*s' in video_mode; using default: '%u'\n",
 873                                                         end - vm, vm, color_depth);
 874                                         }
 875                                         bpp_set = 1;
 876                                 } else if (!refresh_set) {
 877                                         refresh = val;
 878                                         refresh_set = 1;
 879                                 }
 880                         }
 881                         vm = end;
 882                 }
 883                 switch (*vm) {
 884                 case '@':
 885                         bpp_set = 1;
 886                         /* fallthru */
 887                 case '-':
 888                         yres_set = 1;
 889                         /* fallthru */
 890                 case 'x':
 891                         xres_set = 1;
 892                         /* fallthru */
 893                 case 'M':
 894                 case 'R':
 895                         vm++;
 896                         break;
 897
 898                 default:
 899                         if (*vm != '\0')
 900                                 vm++;
 901                 }
 902         }
 903         if (p->xres == 0 || p->yres == 0) {
 904                 printf("Invalid video mode: %s\n", getenv("video_mode"));
 905                 lcd_enabled = 0;
 906                 printf("Supported video modes are:");
 907                 for (p = &tx51_fb_modes[0]; p->name != NULL; p++) {
 908                         printf(" %s", p->name);
 909                 }
 910                 printf("\n");
 911                 return;
 912         }
 913         if (p->xres > panel_info.vl_col || p->yres > panel_info.vl_row) {
 914                 printf("video resolution: %dx%d exceeds hardware limits: %dx%d\n",
 915                         p->xres, p->yres, panel_info.vl_col, panel_info.vl_row);
 916                 lcd_enabled = 0;
 917                 return;
 918         }
 919         panel_info.vl_col = p->xres;
 920         panel_info.vl_row = p->yres;
 921
 922         switch (color_depth) {
 923         case 8:
 924                 panel_info.vl_bpix = LCD_COLOR8;
 925                 break;
 926         case 16:
 927                 panel_info.vl_bpix = LCD_COLOR16;
 928                 break;
 929         default:
 930                 panel_info.vl_bpix = LCD_COLOR24;
 931         }
 932
 933         p->pixclock = KHZ2PICOS(refresh *
 934                 (p->xres + p->left_margin + p->right_margin + p->hsync_len) *
 935                 (p->yres + p->upper_margin + p->lower_margin + p->vsync_len) /
 936                                 1000);
 937         debug("Pixel clock set to %lu.%03lu MHz\n",
 938                 PICOS2KHZ(p->pixclock) / 1000,
 939                 PICOS2KHZ(p->pixclock) % 1000);
 940
 941         if (p != &fb_mode) {
 942                 int ret;
 943
 944                 debug("Creating new display-timing node from '%s'\n",
 945                         video_mode);
 946                 ret = karo_fdt_create_fb_mode(working_fdt, video_mode, p);
 947                 if (ret)
 948                         printf("Failed to create new display-timing node from '%s': %d\n",
 949                                 video_mode, ret);
 950         }
 951
 952         gpio_request_array(stk5_lcd_gpios, ARRAY_SIZE(stk5_lcd_gpios));
 953         imx_iomux_v3_setup_multiple_pads(stk5_lcd_pads,
 954                                         ARRAY_SIZE(stk5_lcd_pads));
 955
 956         lcd_bus_width = karo_fdt_get_lcd_bus_width(working_fdt, 24);
 957         switch (lcd_bus_width) {
 958         case 24:
 959                 pix_fmt = IPU_PIX_FMT_RGB24;
 960                 break;
 961
 962         case 18:
 963                 pix_fmt = IPU_PIX_FMT_RGB666;
 964                 break;
 965
 966         case 16:
 967                 pix_fmt = IPU_PIX_FMT_RGB565;
 968                 break;
 969
 970         default:
 971                 lcd_enabled = 0;
 972                 printf("Invalid LCD bus width: %d\n", lcd_bus_width);
 973                 return;
 974         }
 975         if (karo_load_splashimage(0) == 0) {
 976                 int ret;
 977                 struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)MXC_CCM_BASE;
 978                 u32 ccgr4 = readl(&ccm_regs->CCGR4);
 979
 980                 /* MIPI HSC clock is required for initialization */
 981                 writel(ccgr4 | (3 << 12), &ccm_regs->CCGR4);
 982
 983                 gd->arch.ipu_hw_rev = IPUV3_HW_REV_IPUV3DEX;
 984
 985                 debug("Initializing LCD controller\n");
 986                 ret = ipuv3_fb_init(p, 0, pix_fmt, di_clk_parent, di_clk_rate, -1);
 987                 writel(ccgr4 & ~(3 << 12), &ccm_regs->CCGR4);
 988                 if (ret) {
 989                         printf("Failed to initialize FB driver: %d\n", ret);
 990                         lcd_enabled = 0;
 991                 }
 992         } else {
 993                 debug("Skipping initialization of LCD controller\n");
 994         }
 995 }
 996 #else
 997 #define lcd_enabled 0
 998 #endif /* CONFIG_LCD */
 999
1000 static void stk5_board_init(void)
1001 {
1002         gpio_request_array(stk5_gpios, ARRAY_SIZE(stk5_gpios));
1003         imx_iomux_v3_setup_multiple_pads(stk5_pads, ARRAY_SIZE(stk5_pads));
1004 }
1005
1006 static void stk5v3_board_init(void)
1007 {
1008         stk5_board_init();
1009 }
1010
1011 static void tx51_set_cpu_clock(void)
1012 {
1013         unsigned long cpu_clk = getenv_ulong("cpu_clk", 10, 0);
1014
1015         if (had_ctrlc() || (wrsr & WRSR_TOUT))
1016                 return;
1017
1018         if (cpu_clk == 0 || cpu_clk == mxc_get_clock(MXC_ARM_CLK) / 1000000)
1019                 return;
1020
1021         if (mxc_set_clock(CONFIG_SYS_MX5_HCLK, cpu_clk, MXC_ARM_CLK) == 0) {
1022                 cpu_clk = mxc_get_clock(MXC_ARM_CLK);
1023                 printf("CPU clock set to %lu.%03lu MHz\n",
1024                         cpu_clk / 1000000, cpu_clk / 1000 % 1000);
1025         } else {
1026                 printf("Error: Failed to set CPU clock to %lu MHz\n", cpu_clk);
1027         }
1028 }
1029
1030 static void tx51_init_mac(void)
1031 {
1032         u8 mac[ETH_ALEN];
1033
1034         imx_get_mac_from_fuse(0, mac);
1035         if (!is_valid_ether_addr(mac)) {
1036                 printf("No valid MAC address programmed\n");
1037                 return;
1038         }
1039
1040         printf("MAC addr from fuse: %pM\n", mac);
1041         eth_setenv_enetaddr("ethaddr", mac);
1042 }
1043
1044 int board_late_init(void)
1045 {
1046         int ret = 0;
1047         const char *baseboard;
1048
1049         env_cleanup();
1050
1051         tx51_set_cpu_clock();
1052
1053         if (had_ctrlc())
1054                 setenv_ulong("safeboot", 1);
1055         else if (wrsr & WRSR_TOUT)
1056                 setenv_ulong("wdreset", 1);
1057         else
1058                 karo_fdt_move_fdt();
1059
1060         baseboard = getenv("baseboard");
1061         if (!baseboard)
1062                 goto exit;
1063
1064         printf("Baseboard: %s\n", baseboard);
1065
1066         if (strncmp(baseboard, "stk5", 4) == 0) {
1067                 if ((strlen(baseboard) == 4) ||
1068                         strcmp(baseboard, "stk5-v3") == 0) {
1069                         stk5v3_board_init();
1070                 } else if (strcmp(baseboard, "stk5-v5") == 0) {
1071                         printf("ERROR: Baseboard '%s' incompatible with TX51 module!\n",
1072                                 baseboard);
1073                         stk5v3_board_init();
1074                 } else {
1075                         printf("WARNING: Unsupported STK5 board rev.: %s\n",
1076                                 baseboard + 4);
1077                 }
1078         } else {
1079                 printf("WARNING: Unsupported baseboard: '%s'\n",
1080                         baseboard);
1081                 ret = -EINVAL;
1082         }
1083
1084 exit:
1085         tx51_init_mac();
1086
1087         gpio_set_value(TX51_RESET_OUT_GPIO, 1);
1088         clear_ctrlc();
1089         return ret;
1090 }
1091
1092 int checkboard(void)
1093 {
1094         tx51_print_cpuinfo();
1095 #if CONFIG_NR_DRAM_BANKS > 1
1096         printf("Board: Ka-Ro TX51-8xx1 | TX51-8xx2\n");
1097 #else
1098         printf("Board: Ka-Ro TX51-8xx0\n");
1099 #endif
1100         return 0;
1101 }
1102
1103 #if defined(CONFIG_OF_BOARD_SETUP)
1104 #ifdef CONFIG_FDT_FIXUP_PARTITIONS
1105 #include <jffs2/jffs2.h>
1106 #include <mtd_node.h>
1107 static struct node_info nodes[] = {
1108         { "fsl,imx51-nand", MTD_DEV_TYPE_NAND, },
1109 };
1110 #else
1111 #define fdt_fixup_mtdparts(b,n,c) do { } while (0)
1112 #endif
1113
1114 static const char *tx51_touchpanels[] = {
1115         "ti,tsc2007",
1116         "edt,edt-ft5x06",
1117 };
1118
1119 void ft_board_setup(void *blob, bd_t *bd)
1120 {
1121         const char *video_mode = karo_get_vmode(getenv("video_mode"));
1122         int ret;
1123
1124         ret = fdt_increase_size(blob, 4096);
1125         if (ret)
1126                 printf("Failed to increase FDT size: %s\n", fdt_strerror(ret));
1127
1128         fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
1129         fdt_fixup_ethernet(blob);
1130
1131         karo_fdt_fixup_touchpanel(blob, tx51_touchpanels,
1132                                 ARRAY_SIZE(tx51_touchpanels));
1133         karo_fdt_fixup_usb_otg(blob, "usbotg", "fsl,usbphy", "vbus-supply");
1134         karo_fdt_update_fb_mode(blob, video_mode);
1135 }
1136 #endif /* CONFIG_OF_BOARD_SETUP */