9001fcbc92ee7eb4b300ba4c45db63e498f9427c
[karo-tx-uboot.git] / include / configs / T104xRDB.h
1 /*
2 + * Copyright 2014 Freescale Semiconductor, Inc.
3 + *
4 + * SPDX-License-Identifier:     GPL-2.0+
5 + */
6
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9
10 /*
11  * T104x RDB board configuration file
12  */
13 #define CONFIG_T104xRDB
14 #define CONFIG_PHYS_64BIT
15
16 #ifdef CONFIG_RAMBOOT_PBL
17 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
18 #ifdef CONFIG_T1040RDB
19 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
20 #endif
21 #ifdef CONFIG_T1042RDB_PI
22 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg
23 #endif
24 #ifdef CONFIG_T1042RDB
25 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
26 #endif
27
28 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
29 #define CONFIG_SPL_ENV_SUPPORT
30 #define CONFIG_SPL_SERIAL_SUPPORT
31 #define CONFIG_SPL_FLUSH_IMAGE
32 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
33 #define CONFIG_SPL_LIBGENERIC_SUPPORT
34 #define CONFIG_SPL_LIBCOMMON_SUPPORT
35 #define CONFIG_SPL_I2C_SUPPORT
36 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
37 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
38 #define CONFIG_SYS_TEXT_BASE            0x30001000
39 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
40 #define CONFIG_SPL_PAD_TO               0x40000
41 #define CONFIG_SPL_MAX_SIZE             0x28000
42 #ifdef CONFIG_SPL_BUILD
43 #define CONFIG_SPL_SKIP_RELOCATE
44 #define CONFIG_SPL_COMMON_INIT_DDR
45 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
46 #define CONFIG_SYS_NO_FLASH
47 #endif
48 #define RESET_VECTOR_OFFSET             0x27FFC
49 #define BOOT_PAGE_OFFSET                0x27000
50
51 #ifdef CONFIG_NAND
52 #define CONFIG_SPL_NAND_SUPPORT
53 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
54 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
55 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
56 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
57 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
58 #define CONFIG_SPL_NAND_BOOT
59 #endif
60
61 #ifdef CONFIG_SPIFLASH
62 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
63 #define CONFIG_SPL_SPI_SUPPORT
64 #define CONFIG_SPL_SPI_FLASH_SUPPORT
65 #define CONFIG_SPL_SPI_FLASH_MINIMAL
66 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
67 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
68 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
70 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
71 #ifndef CONFIG_SPL_BUILD
72 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
73 #endif
74 #define CONFIG_SPL_SPI_BOOT
75 #endif
76
77 #ifdef CONFIG_SDCARD
78 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
79 #define CONFIG_SPL_MMC_SUPPORT
80 #define CONFIG_SPL_MMC_MINIMAL
81 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
82 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
83 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
84 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
85 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
86 #ifndef CONFIG_SPL_BUILD
87 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
88 #endif
89 #define CONFIG_SPL_MMC_BOOT
90 #endif
91
92 #endif
93
94 /* High Level Configuration Options */
95 #define CONFIG_BOOKE
96 #define CONFIG_E500                     /* BOOKE e500 family */
97 #define CONFIG_E500MC                   /* BOOKE e500mc family */
98 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
99 #define CONFIG_MP                       /* support multiple processors */
100
101 /* support deep sleep */
102 #define CONFIG_DEEP_SLEEP
103 #define CONFIG_SILENT_CONSOLE
104
105 #ifndef CONFIG_SYS_TEXT_BASE
106 #define CONFIG_SYS_TEXT_BASE    0xeff40000
107 #endif
108
109 #ifndef CONFIG_RESET_VECTOR_ADDRESS
110 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
111 #endif
112
113 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
114 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
115 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
116 #define CONFIG_PCI                      /* Enable PCI/PCIE */
117 #define CONFIG_PCI_INDIRECT_BRIDGE
118 #define CONFIG_PCIE1                    /* PCIE controler 1 */
119 #define CONFIG_PCIE2                    /* PCIE controler 2 */
120 #define CONFIG_PCIE3                    /* PCIE controler 3 */
121 #define CONFIG_PCIE4                    /* PCIE controler 4 */
122
123 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
124 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
125
126 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
127
128 #define CONFIG_ENV_OVERWRITE
129
130 #ifndef CONFIG_SYS_NO_FLASH
131 #define CONFIG_FLASH_CFI_DRIVER
132 #define CONFIG_SYS_FLASH_CFI
133 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
134 #endif
135
136 #if defined(CONFIG_SPIFLASH)
137 #define CONFIG_SYS_EXTRA_ENV_RELOC
138 #define CONFIG_ENV_IS_IN_SPI_FLASH
139 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
140 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
141 #define CONFIG_ENV_SECT_SIZE            0x10000
142 #elif defined(CONFIG_SDCARD)
143 #define CONFIG_SYS_EXTRA_ENV_RELOC
144 #define CONFIG_ENV_IS_IN_MMC
145 #define CONFIG_SYS_MMC_ENV_DEV          0
146 #define CONFIG_ENV_SIZE                 0x2000
147 #define CONFIG_ENV_OFFSET               (512 * 0x800)
148 #elif defined(CONFIG_NAND)
149 #define CONFIG_SYS_EXTRA_ENV_RELOC
150 #define CONFIG_ENV_IS_IN_NAND
151 #define CONFIG_ENV_SIZE                 0x2000
152 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
153 #else
154 #define CONFIG_ENV_IS_IN_FLASH
155 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
156 #define CONFIG_ENV_SIZE         0x2000
157 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
158 #endif
159
160 #define CONFIG_SYS_CLK_FREQ     100000000
161 #define CONFIG_DDR_CLK_FREQ     66666666
162
163 /*
164  * These can be toggled for performance analysis, otherwise use default.
165  */
166 #define CONFIG_SYS_CACHE_STASHING
167 #define CONFIG_BACKSIDE_L2_CACHE
168 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
169 #define CONFIG_BTB                      /* toggle branch predition */
170 #define CONFIG_DDR_ECC
171 #ifdef CONFIG_DDR_ECC
172 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
173 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
174 #endif
175
176 #define CONFIG_ENABLE_36BIT_PHYS
177
178 #define CONFIG_ADDR_MAP
179 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
180
181 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
182 #define CONFIG_SYS_MEMTEST_END          0x00400000
183 #define CONFIG_SYS_ALT_MEMTEST
184 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
185
186 /*
187  *  Config the L3 Cache as L3 SRAM
188  */
189 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
190 #define CONFIG_SYS_L3_SIZE              256 << 10
191 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
192 #ifdef CONFIG_RAMBOOT_PBL
193 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
194 #endif
195 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
196 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
197 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
198 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
199
200 #define CONFIG_SYS_DCSRBAR              0xf0000000
201 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
202
203 /*
204  * DDR Setup
205  */
206 #define CONFIG_VERY_BIG_RAM
207 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
208 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
209
210 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
211 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
212 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
213
214 #define CONFIG_DDR_SPD
215 #define CONFIG_SYS_DDR_RAW_TIMING
216 #define CONFIG_SYS_FSL_DDR3
217
218 #define CONFIG_SYS_SPD_BUS_NUM  0
219 #define SPD_EEPROM_ADDRESS      0x51
220
221 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
222
223 /*
224  * IFC Definitions
225  */
226 #define CONFIG_SYS_FLASH_BASE   0xe8000000
227 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
228
229 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
230 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
231                                 CSPR_PORT_SIZE_16 | \
232                                 CSPR_MSEL_NOR | \
233                                 CSPR_V)
234 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
235
236 /*
237  * TDM Definition
238  */
239 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
240
241 /* NOR Flash Timing Params */
242 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
243 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
244                                 FTIM0_NOR_TEADC(0x5) | \
245                                 FTIM0_NOR_TEAHC(0x5))
246 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
247                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
248                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
249 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
250                                 FTIM2_NOR_TCH(0x4) | \
251                                 FTIM2_NOR_TWPH(0x0E) | \
252                                 FTIM2_NOR_TWP(0x1c))
253 #define CONFIG_SYS_NOR_FTIM3    0x0
254
255 #define CONFIG_SYS_FLASH_QUIET_TEST
256 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
257
258 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
259 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
260 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
261 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
262
263 #define CONFIG_SYS_FLASH_EMPTY_INFO
264 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
265
266 /* CPLD on IFC */
267 #define CPLD_LBMAP_MASK                 0x3F
268 #define CPLD_BANK_SEL_MASK              0x07
269 #define CPLD_BANK_OVERRIDE              0x40
270 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
271 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
272 #define CPLD_LBMAP_RESET                0xFF
273 #define CPLD_LBMAP_SHIFT                0x03
274 #ifdef CONFIG_T1042RDB_PI
275 #define CPLD_DIU_SEL_DFP                0x80
276 #endif
277
278 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
279 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
280 #define CONFIG_SYS_CSPR2_EXT    (0xf)
281 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
282                                 | CSPR_PORT_SIZE_8 \
283                                 | CSPR_MSEL_GPCM \
284                                 | CSPR_V)
285 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
286 #define CONFIG_SYS_CSOR2        0x0
287 /* CPLD Timing parameters for IFC CS2 */
288 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
289                                         FTIM0_GPCM_TEADC(0x0e) | \
290                                         FTIM0_GPCM_TEAHC(0x0e))
291 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
292                                         FTIM1_GPCM_TRAD(0x1f))
293 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
294                                         FTIM2_GPCM_TCH(0x8) | \
295                                         FTIM2_GPCM_TWP(0x1f))
296 #define CONFIG_SYS_CS2_FTIM3            0x0
297
298 /* NAND Flash on IFC */
299 #define CONFIG_NAND_FSL_IFC
300 #define CONFIG_SYS_NAND_BASE            0xff800000
301 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
302
303 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
304 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
305                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
306                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
307                                 | CSPR_V)
308 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
309
310 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
311                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
312                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
313                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
314                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
315                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
316                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
317
318 #define CONFIG_SYS_NAND_ONFI_DETECTION
319
320 /* ONFI NAND Flash mode0 Timing Params */
321 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
322                                         FTIM0_NAND_TWP(0x18)   | \
323                                         FTIM0_NAND_TWCHT(0x07) | \
324                                         FTIM0_NAND_TWH(0x0a))
325 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
326                                         FTIM1_NAND_TWBE(0x39)  | \
327                                         FTIM1_NAND_TRR(0x0e)   | \
328                                         FTIM1_NAND_TRP(0x18))
329 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
330                                         FTIM2_NAND_TREH(0x0a) | \
331                                         FTIM2_NAND_TWHRE(0x1e))
332 #define CONFIG_SYS_NAND_FTIM3           0x0
333
334 #define CONFIG_SYS_NAND_DDR_LAW         11
335 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
336 #define CONFIG_SYS_MAX_NAND_DEVICE      1
337 #define CONFIG_MTD_NAND_VERIFY_WRITE
338 #define CONFIG_CMD_NAND
339
340 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
341
342 #if defined(CONFIG_NAND)
343 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
344 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
345 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
346 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
347 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
348 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
349 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
350 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
351 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
352 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
353 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
354 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
355 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
356 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
357 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
358 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
359 #else
360 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
361 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
362 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
363 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
364 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
365 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
366 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
367 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
368 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
369 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
370 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
371 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
372 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
373 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
374 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
375 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
376 #endif
377
378 #ifdef CONFIG_SPL_BUILD
379 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
380 #else
381 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
382 #endif
383
384 #if defined(CONFIG_RAMBOOT_PBL)
385 #define CONFIG_SYS_RAMBOOT
386 #endif
387
388 #define CONFIG_BOARD_EARLY_INIT_R
389 #define CONFIG_MISC_INIT_R
390
391 #define CONFIG_HWCONFIG
392
393 /* define to use L1 as initial stack */
394 #define CONFIG_L1_INIT_RAM
395 #define CONFIG_SYS_INIT_RAM_LOCK
396 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
397 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
398 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
399 /* The assembler doesn't like typecast */
400 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
401         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
402           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
403 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
404
405 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
406                                         GENERATED_GBL_DATA_SIZE)
407 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
408
409 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
410 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
411
412 /* Serial Port - controlled on board with jumper J8
413  * open - index 2
414  * shorted - index 1
415  */
416 #define CONFIG_CONS_INDEX       1
417 #define CONFIG_SYS_NS16550
418 #define CONFIG_SYS_NS16550_SERIAL
419 #define CONFIG_SYS_NS16550_REG_SIZE     1
420 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
421
422 #define CONFIG_SYS_BAUDRATE_TABLE       \
423         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
424
425 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
426 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
427 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
428 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
429 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
430 #ifndef CONFIG_SPL_BUILD
431 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
432 #endif
433
434 /* Use the HUSH parser */
435 #define CONFIG_SYS_HUSH_PARSER
436 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
437
438 #ifdef CONFIG_T1042RDB_PI
439 /* Video */
440 #define CONFIG_FSL_DIU_FB
441
442 #ifdef CONFIG_FSL_DIU_FB
443 #define CONFIG_FSL_DIU_CH7301
444 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
445 #define CONFIG_VIDEO
446 #define CONFIG_CMD_BMP
447 #define CONFIG_CFB_CONSOLE
448 #define CONFIG_CFB_CONSOLE_ANSI
449 #define CONFIG_VIDEO_SW_CURSOR
450 #define CONFIG_VGA_AS_SINGLE_DEVICE
451 #define CONFIG_VIDEO_LOGO
452 #define CONFIG_VIDEO_BMP_LOGO
453 #endif
454 #endif
455
456 /* pass open firmware flat tree */
457 #define CONFIG_OF_LIBFDT
458 #define CONFIG_OF_BOARD_SETUP
459 #define CONFIG_OF_STDOUT_VIA_ALIAS
460
461 /* new uImage format support */
462 #define CONFIG_FIT
463 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
464
465 /* I2C */
466 #define CONFIG_SYS_I2C
467 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
468 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
469 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
470 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
471 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
472 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
473 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
474 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
475 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
476 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
477 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
478 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
479 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
480
481 /* I2C bus multiplexer */
482 #define I2C_MUX_PCA_ADDR                0x70
483 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
484 #define I2C_MUX_CH_DEFAULT      0x8
485 #endif
486
487 #ifdef CONFIG_T1042RDB_PI
488 /* LDI/DVI Encoder for display */
489 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
490 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
491
492 /*
493  * RTC configuration
494  */
495 #define RTC
496 #define CONFIG_RTC_DS1337               1
497 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
498
499 /*DVI encoder*/
500 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
501 #endif
502
503 /*
504  * eSPI - Enhanced SPI
505  */
506 #define CONFIG_FSL_ESPI
507 #define CONFIG_SPI_FLASH
508 #define CONFIG_SPI_FLASH_STMICRO
509 #define CONFIG_CMD_SF
510 #define CONFIG_SF_DEFAULT_SPEED         10000000
511 #define CONFIG_SF_DEFAULT_MODE          0
512 #define CONFIG_ENV_SPI_BUS              0
513 #define CONFIG_ENV_SPI_CS               0
514 #define CONFIG_ENV_SPI_MAX_HZ           10000000
515 #define CONFIG_ENV_SPI_MODE             0
516
517 /*
518  * General PCI
519  * Memory space is mapped 1-1, but I/O space must start from 0.
520  */
521
522 #ifdef CONFIG_PCI
523 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
524 #ifdef CONFIG_PCIE1
525 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
526 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
527 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
528 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
529 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
530 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
531 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
532 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
533 #endif
534
535 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
536 #ifdef CONFIG_PCIE2
537 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
538 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
539 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
540 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
541 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
542 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
543 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
544 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
545 #endif
546
547 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
548 #ifdef CONFIG_PCIE3
549 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
550 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
551 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
552 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
553 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
554 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
555 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
556 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
557 #endif
558
559 /* controller 4, Base address 203000 */
560 #ifdef CONFIG_PCIE4
561 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
562 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
563 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
564 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
565 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
566 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
567 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
568 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
569 #endif
570
571 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
572 #define CONFIG_E1000
573
574 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
575 #define CONFIG_DOS_PARTITION
576 #endif  /* CONFIG_PCI */
577
578 /* SATA */
579 #define CONFIG_FSL_SATA_V2
580 #ifdef CONFIG_FSL_SATA_V2
581 #define CONFIG_LIBATA
582 #define CONFIG_FSL_SATA
583
584 #define CONFIG_SYS_SATA_MAX_DEVICE      1
585 #define CONFIG_SATA1
586 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
587 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
588
589 #define CONFIG_LBA48
590 #define CONFIG_CMD_SATA
591 #define CONFIG_DOS_PARTITION
592 #define CONFIG_CMD_EXT2
593 #endif
594
595 /*
596 * USB
597 */
598 #define CONFIG_HAS_FSL_DR_USB
599
600 #ifdef CONFIG_HAS_FSL_DR_USB
601 #define CONFIG_USB_EHCI
602
603 #ifdef CONFIG_USB_EHCI
604 #define CONFIG_CMD_USB
605 #define CONFIG_USB_STORAGE
606 #define CONFIG_USB_EHCI_FSL
607 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
608 #define CONFIG_CMD_EXT2
609 #endif
610 #endif
611
612 #define CONFIG_MMC
613
614 #ifdef CONFIG_MMC
615 #define CONFIG_FSL_ESDHC
616 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
617 #define CONFIG_CMD_MMC
618 #define CONFIG_GENERIC_MMC
619 #define CONFIG_CMD_EXT2
620 #define CONFIG_CMD_FAT
621 #define CONFIG_DOS_PARTITION
622 #endif
623
624 /* Qman/Bman */
625 #ifndef CONFIG_NOBQFMAN
626 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
627 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
628 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
629 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
630 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
631 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
632 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
633 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
634 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
635
636 #define CONFIG_SYS_DPAA_FMAN
637 #define CONFIG_SYS_DPAA_PME
638
639 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
640 #define CONFIG_QE
641 #define CONFIG_U_QE
642 #endif
643
644 /* Default address of microcode for the Linux Fman driver */
645 #if defined(CONFIG_SPIFLASH)
646 /*
647  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
648  * env, so we got 0x110000.
649  */
650 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
651 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
652 #elif defined(CONFIG_SDCARD)
653 /*
654  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
655  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
656  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
657  */
658 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
659 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
660 #elif defined(CONFIG_NAND)
661 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
662 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
663 #else
664 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
665 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
666 #endif
667
668 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
669 #if defined(CONFIG_SPIFLASH)
670 #define CONFIG_SYS_QE_FW_ADDR           0x130000
671 #elif defined(CONFIG_SDCARD)
672 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
673 #elif defined(CONFIG_NAND)
674 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
675 #else
676 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
677 #endif
678 #endif
679
680
681 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
682 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
683 #endif /* CONFIG_NOBQFMAN */
684
685 #ifdef CONFIG_SYS_DPAA_FMAN
686 #define CONFIG_FMAN_ENET
687 #define CONFIG_PHY_VITESSE
688 #define CONFIG_PHY_REALTEK
689 #endif
690
691 #ifdef CONFIG_FMAN_ENET
692 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
693 #define CONFIG_SYS_SGMII1_PHY_ADDR              0x03
694 #endif
695 #define CONFIG_SYS_RGMII1_PHY_ADDR              0x01
696 #define CONFIG_SYS_RGMII2_PHY_ADDR              0x02
697
698 #define CONFIG_MII              /* MII PHY management */
699 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
700 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
701 #endif
702
703 /*
704  * Environment
705  */
706 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
707 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
708
709 /*
710  * Command line configuration.
711  */
712 #include <config_cmd_default.h>
713
714 #ifdef CONFIG_T1042RDB_PI
715 #define CONFIG_CMD_DATE
716 #endif
717 #define CONFIG_CMD_DHCP
718 #define CONFIG_CMD_ELF
719 #define CONFIG_CMD_ERRATA
720 #define CONFIG_CMD_GREPENV
721 #define CONFIG_CMD_IRQ
722 #define CONFIG_CMD_I2C
723 #define CONFIG_CMD_MII
724 #define CONFIG_CMD_PING
725 #define CONFIG_CMD_REGINFO
726 #define CONFIG_CMD_SETEXPR
727
728 #ifdef CONFIG_PCI
729 #define CONFIG_CMD_PCI
730 #define CONFIG_CMD_NET
731 #endif
732
733 /*
734  * Miscellaneous configurable options
735  */
736 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
737 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
738 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
739 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
740 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
741 #ifdef CONFIG_CMD_KGDB
742 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
743 #else
744 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
745 #endif
746 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
747 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
748 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
749
750 /*
751  * For booting Linux, the board info and command line data
752  * have to be in the first 64 MB of memory, since this is
753  * the maximum mapped by the Linux kernel during initialization.
754  */
755 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
756 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
757
758 #ifdef CONFIG_CMD_KGDB
759 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
760 #endif
761
762 /*
763  * Dynamic MTD Partition support with mtdparts
764  */
765 #ifndef CONFIG_SYS_NO_FLASH
766 #define CONFIG_MTD_DEVICE
767 #define CONFIG_MTD_PARTITIONS
768 #define CONFIG_CMD_MTDPARTS
769 #define CONFIG_FLASH_CFI_MTD
770 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
771                         "spi0=spife110000.0"
772 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
773                                 "128k(dtb),96m(fs),-(user);"\
774                                 "fff800000.flash:2m(uboot),9m(kernel),"\
775                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
776                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
777 #endif
778
779 /*
780  * Environment Configuration
781  */
782 #define CONFIG_ROOTPATH         "/opt/nfsroot"
783 #define CONFIG_BOOTFILE         "uImage"
784 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
785
786 /* default location for tftp and bootm */
787 #define CONFIG_LOADADDR         1000000
788
789 #define CONFIG_BOOTDELAY        10      /*-1 disables auto-boot*/
790
791 #define CONFIG_BAUDRATE 115200
792
793 #define __USB_PHY_TYPE  utmi
794 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
795
796 #ifdef CONFIG_T1040RDB
797 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
798 #elif defined(CONFIG_T1042RDB_PI)
799 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
800 #elif defined(CONFIG_T1042RDB)
801 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
802 #endif
803
804 #ifdef CONFIG_FSL_DIU_FB
805 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
806 #else
807 #define DIU_ENVIRONMENT
808 #endif
809
810 #define CONFIG_EXTRA_ENV_SETTINGS                               \
811         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
812         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
813         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
814         "netdev=eth0\0"                                         \
815         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
816         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
817         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
818         "tftpflash=tftpboot $loadaddr $uboot && "               \
819         "protect off $ubootaddr +$filesize && "                 \
820         "erase $ubootaddr +$filesize && "                       \
821         "cp.b $loadaddr $ubootaddr $filesize && "               \
822         "protect on $ubootaddr +$filesize && "                  \
823         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
824         "consoledev=ttyS0\0"                                    \
825         "ramdiskaddr=2000000\0"                                 \
826         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
827         "fdtaddr=c00000\0"                                      \
828         "fdtfile=" __stringify(FDTFILE) "\0"                    \
829         "bdev=sda3\0"
830
831 #define CONFIG_LINUX                       \
832         "setenv bootargs root=/dev/ram rw "            \
833         "console=$consoledev,$baudrate $othbootargs;"  \
834         "setenv ramdiskaddr 0x02000000;"               \
835         "setenv fdtaddr 0x00c00000;"                   \
836         "setenv loadaddr 0x1000000;"                   \
837         "bootm $loadaddr $ramdiskaddr $fdtaddr"
838
839 #define CONFIG_HDBOOT                                   \
840         "setenv bootargs root=/dev/$bdev rw "           \
841         "console=$consoledev,$baudrate $othbootargs;"   \
842         "tftp $loadaddr $bootfile;"                     \
843         "tftp $fdtaddr $fdtfile;"                       \
844         "bootm $loadaddr - $fdtaddr"
845
846 #define CONFIG_NFSBOOTCOMMAND                   \
847         "setenv bootargs root=/dev/nfs rw "     \
848         "nfsroot=$serverip:$rootpath "          \
849         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
850         "console=$consoledev,$baudrate $othbootargs;"   \
851         "tftp $loadaddr $bootfile;"             \
852         "tftp $fdtaddr $fdtfile;"               \
853         "bootm $loadaddr - $fdtaddr"
854
855 #define CONFIG_RAMBOOTCOMMAND                           \
856         "setenv bootargs root=/dev/ram rw "             \
857         "console=$consoledev,$baudrate $othbootargs;"   \
858         "tftp $ramdiskaddr $ramdiskfile;"               \
859         "tftp $loadaddr $bootfile;"                     \
860         "tftp $fdtaddr $fdtfile;"                       \
861         "bootm $loadaddr $ramdiskaddr $fdtaddr"
862
863 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
864
865 #ifdef CONFIG_SECURE_BOOT
866 #include <asm/fsl_secure_boot.h>
867 #endif
868
869 #endif  /* __CONFIG_H */