3 * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
5 * Support for the Elmeg VoVPN Gateway Module
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 #define CONFIG_MPC8272 1
29 /* define busmode: 8260 */
30 #undef CONFIG_BUSMODE_60x
32 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */
33 #ifdef CONFIG_CLKIN_66MHz
34 #define CONFIG_8260_CLKIN 66666666 /* in Hz */
36 #define CONFIG_8260_CLKIN 100000000 /* in Hz */
39 /* call board_early_init_f */
40 #define CONFIG_BOARD_EARLY_INIT_F 1
42 /* have misc_init_r() function */
43 #define CONFIG_MISC_INIT_R 1
45 /* have reset_phy_r() function */
46 #define CONFIG_RESET_PHY_R 1
48 /* have special reset function */
49 #define CONFIG_HAVE_OWN_RESET 1
51 /* allow serial and ethaddr to be overwritten */
52 #define CONFIG_ENV_OVERWRITE
54 /* watchdog disabled */
55 #undef CONFIG_WATCHDOG
57 /* include support for bzip2 compressed images */
61 #undef CONFIG_STATUS_LED /* XXX jse */
63 /* vendor parameter protection */
64 #define CONFIG_ENV_OVERWRITE
67 * select serial console configuration
69 * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
70 * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
73 #define CONFIG_CONS_ON_SMC
74 #undef CONFIG_CONS_ON_SCC
75 #undef CONFIG_CONS_NONE
76 #define CONFIG_CONS_INDEX 1
78 /* serial port default baudrate */
79 #define CONFIG_BAUDRATE 115200
81 /* echo on for serial download */
82 #define CONFIG_LOADS_ECHO 1
84 /* don't allow baudrate change */
85 #undef CFG_LOADS_BAUD_CHANGE
87 /* supported baudrates */
88 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
91 * select ethernet configuration
93 * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
94 * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
97 * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
98 * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
99 * from CONFIG_COMMANDS to remove support for networking.
101 #undef CONFIG_ETHER_ON_SCC
102 #define CONFIG_ETHER_ON_FCC
103 #undef CONFIG_ETHER_NONE
105 #ifdef CONFIG_ETHER_ON_FCC
107 /* which SCC/FCC channel for ethernet */
108 #define CONFIG_ETHER_INDEX 1
110 /* Marvell Switch SMI base addr */
111 #define CFG_PHY_ADDR 0x10
113 /* FCC1 RMII REFCLK is CLK10 */
114 #define CFG_CMXFCR_VALUE CMXFCR_TF1CS_CLK10
115 #define CFG_CMXFCR_MASK (CMXFCR_FC1|CMXFCR_TF1CS_MSK)
117 /* BDs and buffers on 60x bus */
118 #define CFG_CPMFCR_RAMTYPE 0
120 /* Local Protect, Full duplex, Flowcontrol, RMII */
121 #define CFG_FCC_PSMR (FCC_PSMR_LPB|FCC_PSMR_FDE|\
122 FCC_PSMR_FCE|FCC_PSMR_RMII)
124 /* bit-bang MII PHY management */
125 #define CONFIG_BITBANGMII
127 #define MDIO_PORT 1 /* Port B */
128 #define CFG_MDIO_PIN 0x00002000 /* PB18 */
129 #define CFG_MDC_PIN 0x00001000 /* PB19 */
130 #define MDIO_ACTIVE (iop->pdir |= CFG_MDIO_PIN)
131 #define MDIO_TRISTATE (iop->pdir &= ~CFG_MDIO_PIN)
132 #define MDIO_READ ((iop->pdat & CFG_MDIO_PIN) != 0)
133 #define MDIO(bit) if(bit) iop->pdat |= CFG_MDIO_PIN; \
134 else iop->pdat &= ~CFG_MDIO_PIN
135 #define MDC(bit) if(bit) iop->pdat |= CFG_MDC_PIN; \
136 else iop->pdat &= ~CFG_MDC_PIN
137 #define MIIDELAY udelay(1)
142 * Command line configuration.
145 #define CONFIG_CMD_AUTOSCRIPT
146 #define CONFIG_CMD_BDI
147 #define CONFIG_CMD_CONSOLE
148 #define CONFIG_CMD_ECHO
149 #define CONFIG_CMD_ENV
150 #define CONFIG_CMD_FLASH
151 #define CONFIG_CMD_IMI
152 #define CONFIG_CMD_IMLS
153 #define CONFIG_CMD_LOADB
154 #define CONFIG_CMD_MEMORY
155 #define CONFIG_CMD_MISC
156 #define CONFIG_CMD_NET
157 #define CONFIG_CMD_PING
158 #define CONFIG_CMD_RUN
162 * boot options & environment
164 #define CONFIG_BOOTDELAY 3
165 #define CONFIG_BOOTCOMMAND "run flash_self"
166 #undef CONFIG_BOOTARGS
167 #define CONFIG_EXTRA_ENV_SETTINGS \
168 "clean_nv=erase fff20000 ffffffff\0" \
169 "update_boss=tftp 100000 PPC/logic157.bin; protect off fff00000 ffffffff; erase fff00000 ffffffff; cp.b 100000 fff00000 ${filesize}; tftp 100000 PPC/bootmon157.bin; cp.b 100000 fff20000 ${filesize}\0" \
170 "update_lx=tftp 100000 ${kernel}; erase ${kernel_addr} ffefffff; cp.b 100000 ${kernel_addr} ${filesize}\0" \
171 "update_fs=tftp 100000 ${fs}.${fstype}; erase ff840000 ffdfffff; cp.b 100000 ff840000 ${filesize}\0" \
172 "update_ub=tftp 100000 ${uboot}; protect off fff00000 fff1ffff; erase fff00000 fff1ffff; cp.b 100000 fff00000 ${filesize}; protect off ff820000 ff83ffff; erase ff820000 ff83ffff\0" \
173 "flashargs=setenv bootargs root=${rootdev} rw rootfstype=${fstype}\0" \
174 "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \
175 "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off\0" \
176 "addmisc=setenv bootargs ${bootargs} console=${console},${baudrate} ethaddr=${ethaddr} panic=1\0" \
177 "net_nfs=tftpboot 400000 ${kernel}; run nfsargs addip addmisc; bootm\0" \
178 "net_self=tftpboot 400000 ${kernel}; run flashargs addmisc; bootm\0" \
179 "flash_self=run flashargs addmisc; bootm ${kernel_addr}\0" \
180 "flash_nfs=run nfsargs addip addmisc; bootm ${kernel_addr}\0" \
182 "rootpath=/root_fs\0" \
183 "uboot=PPC/u-boot.bin\0" \
184 "kernel=PPC/uImage\0" \
185 "kernel_addr=ffe00000\0" \
190 "ethaddr=00:09:4f:01:02:03\0" \
191 "ipaddr=10.0.0.201\0" \
192 "netmask=255.255.255.0\0" \
193 "serverip=10.0.0.136\0" \
194 "gatewayip=10.0.0.10\0" \
195 "hostname=bastard\0" \
200 * miscellaneous configurable options
203 /* undef to save memory */
206 /* monitor command prompt */
207 #define CFG_PROMPT "=> "
209 /* console i/o buffer size */
210 #if defined(CONFIG_CMD_KGDB)
211 #define CFG_CBSIZE 1024
213 #define CFG_CBSIZE 256
216 /* print buffer size */
217 #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
219 /* max number of command args */
220 #define CFG_MAXARGS 16
222 /* boot argument buffer size */
223 #define CFG_BARGSIZE CFG_CBSIZE
225 /* memtest works on */
226 #define CFG_MEMTEST_START 0x00100000
227 /* 1 ... 15 MB in DRAM */
228 #define CFG_MEMTEST_END 0x00f00000
229 /* full featured memtest */
230 #define CFG_ALT_MEMTEST
232 /* default load address */
233 #define CFG_LOAD_ADDR 0x00100000
235 /* decrementer freq: 1 ms ticks */
238 /* configure flash */
239 #define CFG_FLASH_BASE 0xff800000
240 #define CFG_MAX_FLASH_BANKS 1
241 #define CFG_MAX_FLASH_SECT 64
242 #define CFG_FLASH_SIZE 8
243 #undef CFG_FLASH_16BIT
244 #define CFG_FLASH_ERASE_TOUT 240000
245 #define CFG_FLASH_WRITE_TOUT 500
246 #define CFG_FLASH_LOCK_TOUT 500
247 #define CFG_FLASH_UNLOCK_TOUT 10000
248 #define CFG_FLASH_PROTECTION
250 /* monitor in flash */
251 #define CFG_MONITOR_OFFSET 0x00700000
253 /* environment in flash */
254 #define CFG_ENV_IS_IN_FLASH 1
255 #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00020000)
256 #define CFG_ENV_SIZE 0x00020000
257 #define CFG_ENV_SECT_SIZE 0x00020000
260 * Initial memory map for linux
261 * For booting Linux, the board info and command line data
262 * have to be in the first 8 MB of memory, since this is
263 * the maximum mapped by the Linux kernel during initialization.
265 #define CFG_BOOTMAPSZ (8 << 20)
267 /* hard reset configuration words */
268 #ifdef CONFIG_CLKIN_66MHz
269 #define CFG_HRCW_MASTER 0x04643050
271 #error NO HRCW FOR 100MHZ SPECIFIED !!!
273 #define CFG_HRCW_SLAVE1 0x00000000
274 #define CFG_HRCW_SLAVE2 0x00000000
275 #define CFG_HRCW_SLAVE3 0x00000000
276 #define CFG_HRCW_SLAVE4 0x00000000
277 #define CFG_HRCW_SLAVE5 0x00000000
278 #define CFG_HRCW_SLAVE6 0x00000000
279 #define CFG_HRCW_SLAVE7 0x00000000
281 /* internal memory mapped register */
282 #define CFG_IMMR 0xF0000000
284 /* definitions for initial stack pointer and data area (in DPRAM) */
285 #define CFG_INIT_RAM_ADDR CFG_IMMR
286 #define CFG_INIT_RAM_END 0x2000
287 #define CFG_GBL_DATA_SIZE 128
288 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
289 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
292 * Start addresses for the final memory configuration
293 * (Set up by the startup code)
294 * Please note that CFG_SDRAM_BASE _must_ start at 0
296 #define CFG_SDRAM_BASE 0x00000000
297 #define CFG_SDRAM_SIZE (32*1024*1024)
298 #define CFG_MONITOR_BASE TEXT_BASE
299 #define CFG_MONITOR_FLASH (CFG_FLASH_BASE + CFG_MONITOR_OFFSET)
300 #define CFG_MONITOR_LEN 0x00020000
301 #define CFG_MALLOC_LEN 0x00020000
304 #define BOOTFLAG_COLD 0x01 /* normal power-on */
305 #define BOOTFLAG_WARM 0x02 /* software reboot */
307 /* cache configuration */
308 #define CFG_CACHELINE_SIZE 32 /* for MPC8260 */
309 #if defined(CONFIG_CMD_KGDB)
310 #define CFG_CACHELINE_SHIFT 5 /* log base 2 of above */
314 * HIDx - Hardware Implementation-dependent Registers
315 *-----------------------------------------------------------------------
316 * HID0 also contains cache control - initially enable both caches and
317 * invalidate contents, then the final state leaves only the instruction
318 * cache enabled. Note that Power-On and Hard reset invalidate the caches,
319 * but Soft reset does not.
321 * HID1 has only read-only information - nothing to set.
323 #define CFG_HID0_INIT (HID0_ICE|HID0_DCE|\
324 HID0_ICFI|HID0_DCI|HID0_IFEM|HID0_ABE)
325 #define CFG_HID0_FINAL (HID0_IFEM|HID0_ABE)
328 /* RMR - reset mode register - turn on checkstop reset enable */
329 #define CFG_RMR RMR_CSRE
331 /* BCR - bus configuration */
332 #define CFG_BCR 0x00000000
334 /* SIUMCR - siu module configuration */
335 #define CFG_SIUMCR 0x4905c000
337 /* SYPCR - system protection control */
338 #if defined(CONFIG_WATCHDOG)
339 #define CFG_SYPCR 0xffffff87
341 #define CFG_SYPCR 0xffffff83
344 /* TMCNTSC - time counter status and control */
345 /* clear interrupts XXX jse */
346 /*#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR) */
347 #define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|\
348 TMCNTSC_TCF|TMCNTSC_TCE)
350 /* PISCR - periodic interrupt status and control */
351 /* clear interrupts XXX jse */
352 /*#define CFG_PISCR (PISCR_PS) */
353 #define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
355 /* SCCR - system clock control */
356 #define CFG_SCCR 0x000001a9
358 /* RCCR - risc controller configuration */
364 * CS0 - FLASH 8MB/8Bit base=0xff800000 (boot: 0xfe000000, 8x mirrored)
365 * CS1 - SDRAM 32MB/64Bit base=0x00000000
366 * CS2 - DSP/SL1 1MB/16Bit base=0xf0100000
367 * CS3 - DSP/SL2 1MB/16Bit base=0xf0200000
368 * CS4 - DSP/SL3 1MB/16Bit base=0xf0300000
369 * CS5 - DSP/SL4 1MB/16Bit base=0xf0400000
370 * CS7 - DPRAM 1KB/8Bit base=0xf0500000, size=32KB (32x mirrored)
371 * x - IMMR 384KB base=0xf0000000
373 /* XXX jse 100MHz TODO */
374 #define CFG_BR0_PRELIM 0xff800801
375 #define CFG_OR0_PRELIM 0xff801e44
376 #define CFG_BR1_PRELIM 0x00000041
377 #define CFG_OR1_PRELIM 0xfe002ec0
379 #define CFG_BR2_PRELIM 0xf0101001
380 #define CFG_OR2_PRELIM 0xfff00ef4
381 #define CFG_BR3_PRELIM 0xf0201001
382 #define CFG_OR3_PRELIM 0xfff00ef4
383 #define CFG_BR4_PRELIM 0xf0301001
384 #define CFG_OR4_PRELIM 0xfff00ef4
385 #define CFG_BR5_PRELIM 0xf0401001
386 #define CFG_OR5_PRELIM 0xfff00ef4
388 #define CFG_BR2_PRELIM 0xf0101081
389 #define CFG_OR2_PRELIM 0xfff00104
390 #define CFG_BR3_PRELIM 0xf0201081
391 #define CFG_OR3_PRELIM 0xfff00104
392 #define CFG_BR4_PRELIM 0xf0301081
393 #define CFG_OR4_PRELIM 0xfff00104
394 #define CFG_BR5_PRELIM 0xf0401081
395 #define CFG_OR5_PRELIM 0xfff00104
397 #define CFG_BR7_PRELIM 0xf0500881
398 #define CFG_OR7_PRELIM 0xffff8104
399 #define CFG_MPTPR 0x2700
400 #define CFG_PSDMR 0x822a2452 /* optimal */
401 /*#define CFG_PSDMR 0x822a48a3 */ /* relaxed */
402 #define CFG_PSRT 0x1a
405 #define CFG_RESET_ADDRESS 0x40000000
407 #endif /* __CONFIG_H */