include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include <linux/sizes.h>
  11
  12 /* SPL */
  13 #define CONFIG_SPL_BOARD_INIT
  14 #define CONFIG_SPL_NAND_SUPPORT
  15 #define CONFIG_SPL_MMC_SUPPORT
  16 #define CONFIG_SPL_POWER_SUPPORT
  17 /* Location in NAND to read U-Boot from */
  18 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  19
  20 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  21 #include "mx6_common.h"
  22 #define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
  23 #define CONFIG_DISPLAY_BOARDINFO_LATE  /* display board info (after reloc) */
  24
  25 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  26
  27 #include <asm/arch/imx-regs.h>
  28 #include <asm/imx-common/gpio.h>
  29
  30 /* ATAGs */
  31 #define CONFIG_CMDLINE_TAG
  32 #define CONFIG_SETUP_MEMORY_TAGS
  33 #define CONFIG_INITRD_TAG
  34 #define CONFIG_SERIAL_TAG
  35 #define CONFIG_REVISION_TAG
  36
  37 #define CONFIG_SYS_GENERIC_BOARD
  38
  39 /* Size of malloc() pool */
  40 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  41
  42 /* Init Functions */
  43 #define CONFIG_BOARD_EARLY_INIT_F
  44 #define CONFIG_MISC_INIT_R
  45
  46 /* Driver Model */
  47 #ifndef CONFIG_SPL_BUILD
  48 #define CONFIG_DM
  49 #define CONFIG_DM_GPIO
  50 #define CONFIG_DM_SERIAL
  51 #define CONFIG_DM_THERMAL
  52 #define CONFIG_CMD_DM
  53 #endif
  54
  55 /* GPIO */
  56 #define CONFIG_MXC_GPIO
  57 #define CONFIG_CMD_GPIO
  58
  59 /* Thermal */
  60 #define CONFIG_IMX6_THERMAL
  61
  62 /* Serial */
  63 #define CONFIG_MXC_UART
  64 #define CONFIG_MXC_UART_BASE           UART2_BASE
  65
  66 #ifdef CONFIG_SPI_FLASH
  67
  68 /* SPI */
  69 #define CONFIG_CMD_SF
  70 #ifdef CONFIG_CMD_SF
  71   #define CONFIG_MXC_SPI
  72   #define CONFIG_SPI_FLASH_MTD
  73   #define CONFIG_SPI_FLASH_BAR
  74   #define CONFIG_SPI_FLASH_WINBOND
  75   #define CONFIG_SF_DEFAULT_BUS              0
  76   #define CONFIG_SF_DEFAULT_CS               0
  77                                              /* GPIO 3-19 (21248) */
  78   #define CONFIG_SF_DEFAULT_SPEED            30000000
  79   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  80 #endif
  81
  82 #else
  83 /* Enable NAND support */
  84 #define CONFIG_CMD_TIME
  85 #define CONFIG_CMD_NAND
  86 #define CONFIG_CMD_NAND_TRIMFFS
  87 #ifdef CONFIG_CMD_NAND
  88   #define CONFIG_NAND_MXS
  89   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  90   #define CONFIG_SYS_NAND_BASE          0x40000000
  91   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  92   #define CONFIG_SYS_NAND_ONFI_DETECTION
  93
  94   /* DMA stuff, needed for GPMI/MXS NAND support */
  95   #define CONFIG_APBH_DMA
  96   #define CONFIG_APBH_DMA_BURST
  97   #define CONFIG_APBH_DMA_BURST8
  98 #endif
  99
 100 #endif /* CONFIG_SPI_FLASH */
 101
 102 /* Flattened Image Tree Suport */
 103 #define CONFIG_FIT
 104 #define CONFIG_FIT_VERBOSE
 105
 106 /* I2C Configs */
 107 #define CONFIG_CMD_I2C
 108 #define CONFIG_SYS_I2C
 109 #define CONFIG_SYS_I2C_MXC
 110 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 111 #define CONFIG_SYS_I2C_SPEED            100000
 112 #define CONFIG_I2C_GSC                  0
 113 #define CONFIG_I2C_PMIC                 1
 114 #define CONFIG_I2C_EDID
 115
 116 /* MMC Configs */
 117 #define CONFIG_FSL_ESDHC
 118 #define CONFIG_FSL_USDHC
 119 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 120 #define CONFIG_SYS_FSL_USDHC_NUM       1
 121 #define CONFIG_MMC
 122 #define CONFIG_CMD_MMC
 123 #define CONFIG_GENERIC_MMC
 124 #define CONFIG_BOUNCE_BUFFER
 125
 126 /* Filesystem support */
 127 #define CONFIG_CMD_EXT2
 128 #define CONFIG_CMD_EXT4
 129 #define CONFIG_CMD_EXT4_WRITE
 130 #define CONFIG_CMD_FAT
 131 #define CONFIG_CMD_UBIFS
 132 #define CONFIG_DOS_PARTITION
 133
 134 /*
 135  * SATA Configs
 136  */
 137 #define CONFIG_CMD_SATA
 138 #ifdef CONFIG_CMD_SATA
 139   #define CONFIG_DWC_AHSATA
 140   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 141   #define CONFIG_DWC_AHSATA_PORT_ID     0
 142   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 143   #define CONFIG_LBA48
 144   #define CONFIG_LIBATA
 145 #endif
 146
 147 /*
 148  * PCI express
 149  */
 150 #define CONFIG_CMD_PCI
 151 #ifdef CONFIG_CMD_PCI
 152 #define CONFIG_PCI
 153 #define CONFIG_PCI_PNP
 154 #define CONFIG_PCI_SCAN_SHOW
 155 #define CONFIG_PCI_FIXUP_DEV
 156 #define CONFIG_PCIE_IMX
 157 #endif
 158
 159 /*
 160  * PMIC
 161  */
 162 #define CONFIG_POWER
 163 #define CONFIG_POWER_I2C
 164 #define CONFIG_POWER_PFUZE100
 165 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 166 #define CONFIG_POWER_LTC3676
 167 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 168
 169 /* Various command support */
 170 #include <config_cmd_default.h>
 171 #undef CONFIG_CMD_IMLS
 172 #define CONFIG_CMD_PING
 173 #define CONFIG_CMD_DHCP
 174 #define CONFIG_CMD_MII
 175 #define CONFIG_CMD_NET
 176 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 177 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 178 #define CONFIG_CMD_SETEXPR
 179 #define CONFIG_CMD_BOOTZ
 180 #define CONFIG_CMD_GSC
 181 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 182 #define CONFIG_CMD_UBI
 183 #define CONFIG_RBTREE
 184 #define CONFIG_LZO
 185 #define CONFIG_CMD_FUSE          /* eFUSE read/write support */
 186 #ifdef CONFIG_CMD_FUSE
 187 #define CONFIG_MXC_OCOTP
 188 #endif
 189
 190
 191 /* Ethernet support */
 192 #define CONFIG_FEC_MXC
 193 #define CONFIG_E1000
 194 #define CONFIG_MII
 195 #define IMX_FEC_BASE             ENET_BASE_ADDR
 196 #define CONFIG_FEC_XCV_TYPE      RGMII
 197 #define CONFIG_FEC_MXC_PHYADDR   0
 198 #define CONFIG_PHYLIB
 199 #define CONFIG_ARP_TIMEOUT       200UL
 200
 201 /* USB Configs */
 202 #define CONFIG_CMD_USB
 203 #define CONFIG_USB_EHCI
 204 #define CONFIG_USB_EHCI_MX6
 205 #define CONFIG_USB_STORAGE
 206 #define CONFIG_USB_HOST_ETHER
 207 #define CONFIG_USB_ETHER_ASIX
 208 #define CONFIG_USB_ETHER_SMSC95XX
 209 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 210 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 211 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 212 #define CONFIG_MXC_USB_FLAGS      0
 213 #define CONFIG_USB_KEYBOARD
 214 #define CONFIG_CI_UDC
 215 #define CONFIG_USBD_HS
 216 #define CONFIG_USB_GADGET_DUALSPEED
 217 #define CONFIG_USB_ETHER
 218 #define CONFIG_USB_ETH_CDC
 219 #define CONFIG_NETCONSOLE
 220 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 221
 222 /* USB Mass Storage Gadget */
 223 #define CONFIG_USB_GADGET
 224 #define CONFIG_CMD_USB_MASS_STORAGE
 225 #define CONFIG_USB_GADGET_MASS_STORAGE
 226 #define CONFIG_USBDOWNLOAD_GADGET
 227 #define CONFIG_USB_GADGET_VBUS_DRAW    2
 228
 229 /* Netchip IDs */
 230 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
 231 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 232 #define CONFIG_G_DNL_MANUFACTURER "Gateworks"
 233
 234 /* Framebuffer and LCD */
 235 #define CONFIG_VIDEO
 236 #define CONFIG_VIDEO_IPUV3
 237 #define CONFIG_CFB_CONSOLE
 238 #define CONFIG_VGA_AS_SINGLE_DEVICE
 239 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 240 #define CONFIG_VIDEO_BMP_RLE8
 241 #define CONFIG_SPLASH_SCREEN
 242 #define CONFIG_BMP_16BPP
 243 #define CONFIG_VIDEO_LOGO
 244 #define CONFIG_IPUV3_CLK          260000000
 245 #define CONFIG_CMD_HDMIDETECT
 246 #define CONFIG_CONSOLE_MUX
 247 #define CONFIG_IMX_HDMI
 248 #define CONFIG_IMX_VIDEO_SKIP
 249
 250 /* serial console (ttymxc1,115200) */
 251 #define CONFIG_CONS_INDEX              1
 252 #define CONFIG_BAUDRATE                115200
 253
 254 /* Miscellaneous configurable options */
 255 #define CONFIG_SYS_LONGHELP
 256 #define CONFIG_SYS_HUSH_PARSER
 257 #define CONFIG_SYS_PROMPT                    "Ventana > "
 258 #define CONFIG_SYS_CBSIZE                    1024
 259 #define CONFIG_AUTO_COMPLETE
 260 #define CONFIG_CMDLINE_EDITING
 261 #define CONFIG_HWCONFIG
 262
 263 /* Print Buffer Size */
 264 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 265 #define CONFIG_SYS_MAXARGS                 16
 266 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 267
 268 /* Memory configuration */
 269 #define CONFIG_SYS_MEMTEST_START       0x10000000
 270 #define CONFIG_SYS_MEMTEST_END         0x10010000
 271 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 272 #define CONFIG_SYS_TEXT_BASE             0x17800000
 273 #define CONFIG_SYS_LOAD_ADDR           0x12000000
 274
 275 /* Physical Memory Map */
 276 #define CONFIG_NR_DRAM_BANKS           1
 277 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 278 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 279 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 280 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 281
 282 #define CONFIG_SYS_INIT_SP_OFFSET \
 283         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 284 #define CONFIG_SYS_INIT_SP_ADDR \
 285         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 286
 287 /* FLASH and environment organization */
 288 #define CONFIG_SYS_NO_FLASH  /* no NOR flash */
 289
 290 /*
 291  * MTD Command for mtdparts
 292  */
 293 #define CONFIG_CMD_MTDPARTS
 294 #define CONFIG_MTD_DEVICE
 295 #define CONFIG_MTD_PARTITIONS
 296 #ifdef CONFIG_SPI_FLASH
 297 #define MTDIDS_DEFAULT    "nor0=nor"
 298 #define MTDPARTS_DEFAULT  \
 299         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 300 #else
 301 #define MTDIDS_DEFAULT    "nand0=nand"
 302 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 303 #endif
 304
 305 /* Persistent Environment Config */
 306 #define CONFIG_ENV_OVERWRITE    /* allow to overwrite serial and ethaddr */
 307 #ifdef CONFIG_SPI_FLASH
 308 #define CONFIG_ENV_IS_IN_SPI_FLASH
 309 #else
 310 #define CONFIG_ENV_IS_IN_NAND
 311 #endif
 312 #if defined(CONFIG_ENV_IS_IN_MMC)
 313   #define CONFIG_ENV_OFFSET              (384 * SZ_1K)
 314   #define CONFIG_ENV_SIZE                (8 * SZ_1K)
 315   #define CONFIG_SYS_MMC_ENV_DEV         0
 316 #elif defined(CONFIG_ENV_IS_IN_NAND)
 317   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 318   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 319   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 320   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 321   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 322 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 323   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 324   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 325   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 326   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 327   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 328   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 329   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 330 #endif
 331
 332 /* Environment */
 333 #define CONFIG_BOOTDELAY          3
 334 #define CONFIG_LOADADDR           CONFIG_SYS_LOAD_ADDR
 335 #define CONFIG_IPADDR             192.168.1.1
 336 #define CONFIG_SERVERIP           192.168.1.146
 337 #define HWCONFIG_DEFAULT \
 338         "hwconfig=rs232;" \
 339         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 340
 341 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 342         "usb_pgood_delay=2000\0" \
 343         "console=ttymxc1\0" \
 344         "bootdevs=usb mmc sata flash\0" \
 345         HWCONFIG_DEFAULT \
 346         "video=\0" \
 347         \
 348         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 349         "mtdids=" MTDIDS_DEFAULT "\0" \
 350         \
 351         "fdt_high=0xffffffff\0" \
 352         "fdt_addr=0x18000000\0" \
 353         "initrd_high=0xffffffff\0" \
 354         "bootdir=boot\0" \
 355         "loadfdt=" \
 356                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 357                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 358                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 359                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 360                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 361                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 362                 "fi\0" \
 363         \
 364         "script=6x_bootscript-ventana\0" \
 365         "loadscript=" \
 366                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 367                         "source; " \
 368                 "fi\0" \
 369         \
 370         "uimage=uImage\0" \
 371         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 372         "mmc_boot=" \
 373                 "setenv fsload 'ext2load mmc 0:1'; " \
 374                 "mmc dev 0 && mmc rescan && " \
 375                 "setenv dtype mmc; run loadscript; " \
 376                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 377                         "setenv bootargs console=${console},${baudrate} " \
 378                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 379                                 "rootwait rw ${video} ${extra}; " \
 380                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 381                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 382                         "else " \
 383                                 "bootm; " \
 384                         "fi; " \
 385                 "fi\0" \
 386         \
 387         "sata_boot=" \
 388                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 389                 "setenv dtype sata; run loadscript; " \
 390                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 391                         "setenv bootargs console=${console},${baudrate} " \
 392                                 "root=/dev/sda1 rootfstype=ext4 " \
 393                                 "rootwait rw ${video} ${extra}; " \
 394                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 395                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 396                         "else " \
 397                                 "bootm; " \
 398                         "fi; " \
 399                 "fi\0" \
 400         "usb_boot=" \
 401                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 402                 "setenv dtype usb; run loadscript; " \
 403                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 404                         "setenv bootargs console=${console},${baudrate} " \
 405                                 "root=/dev/sda1 rootfstype=ext4 " \
 406                                 "rootwait rw ${video} ${extra}; " \
 407                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 408                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 409                         "else " \
 410                                 "bootm; " \
 411                         "fi; " \
 412                 "fi\0"
 413
 414 #ifdef CONFIG_SPI_FLASH
 415         #define CONFIG_EXTRA_ENV_SETTINGS \
 416         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 417         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 418         "image_uboot=ventana/u-boot_spi.imx\0" \
 419         \
 420         "spi_koffset=0x90000\0" \
 421         "spi_klen=0x200000\0" \
 422         \
 423         "spi_updateuboot=echo Updating uboot from " \
 424                 "${serverip}:${image_uboot}...; " \
 425                 "tftpboot ${loadaddr} ${image_uboot} && " \
 426                 "sf probe && sf erase 0 80000 && " \
 427                         "sf write ${loadaddr} 400 ${filesize}\0" \
 428         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 429                 "to ${spi_koffset} ...; " \
 430                 "tftp ${loadaddr} ${image_os} && " \
 431                 "sf probe && " \
 432                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 433         \
 434         "flash_boot=" \
 435                 "if sf probe && " \
 436                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 437                         "setenv bootargs console=${console},${baudrate} " \
 438                                 "root=/dev/mtdblock3 " \
 439                                 "rootfstype=squashfs,jffs2 " \
 440                                 "${video} ${extra}; " \
 441                         "bootm; " \
 442                 "fi\0"
 443 #else
 444         #define CONFIG_EXTRA_ENV_SETTINGS \
 445         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 446         \
 447         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 448         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 449                 "tftp ${loadaddr} ${image_rootfs} && " \
 450                 "nand erase.part rootfs && " \
 451                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 452         \
 453         "flash_boot=" \
 454                 "setenv fsload 'ubifsload'; " \
 455                 "ubi part rootfs; " \
 456                 "if ubi check boot; then " \
 457                         "ubifsmount ubi0:boot; " \
 458                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 459                                 "rootfstype=squashfs,ubifs; " \
 460                         "setenv bootdir; " \
 461                 "elif ubi check rootfs; then " \
 462                         "ubifsmount ubi0:rootfs; " \
 463                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 464                                 "rootfstype=ubifs; " \
 465                 "fi; " \
 466                 "setenv dtype nand; run loadscript; " \
 467                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 468                         "setenv bootargs console=${console},${baudrate} " \
 469                                 "root=${root} ${video} ${extra}; " \
 470                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 471                                 "ubifsumount; " \
 472                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 473                         "else " \
 474                                 "ubifsumount; bootm; " \
 475                         "fi; " \
 476                 "fi\0"
 477 #endif
 478
 479 #define CONFIG_BOOTCOMMAND \
 480         "for btype in ${bootdevs}; do " \
 481                 "echo; echo Attempting ${btype} boot...; " \
 482                 "if run ${btype}_boot; then; fi; " \
 483         "done"
 484
 485 /* Device Tree Support */
 486 #define CONFIG_OF_BOARD_SETUP
 487 #define CONFIG_OF_LIBFDT
 488 #define CONFIG_FDT_FIXUP_PARTITIONS
 489
 490 #ifndef CONFIG_SYS_DCACHE_OFF
 491   #define CONFIG_CMD_CACHE
 492 #endif
 493
 494 #endif                         /* __CONFIG_H */