]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/idmr.h
Coding Style cleanup: remove trailing white space
[karo-tx-uboot.git] / include / configs / idmr.h
1 /*
2  * Configuration settings for the iDMR board
3  *
4  * Based on MC5272C3, r5200  and M5271EVB board configs
5  * (C) Copyright 2006 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
6  * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com>
7  * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
8  *
9  * SPDX-License-Identifier:     GPL-2.0+
10  */
11
12 #ifndef _IDMR_H
13 #define _IDMR_H
14
15
16 /*
17  * High Level Configuration Options (easy to change)
18  */
19
20 #define CONFIG_MCF52x2          /* define processor family */
21 #define CONFIG_M5271            /* define processor type */
22 #define CONFIG_IDMR             /* define board type */
23
24 #undef CONFIG_WATCHDOG          /* disable watchdog */
25
26 /*
27  * Default environment settings
28  */
29 #define CONFIG_BOOTCOMMAND      "run net_nfs"
30 #define CONFIG_BOOTDELAY        5
31 #define CONFIG_MCFUART
32 #define CONFIG_SYS_UART_PORT            (0)
33 #define CONFIG_BAUDRATE         19200
34 #define CONFIG_ETHADDR          00:06:3b:01:41:55
35 #define CONFIG_ETHPRIME
36 #define CONFIG_IPADDR           192.168.30.1
37 #define CONFIG_SERVERIP         192.168.1.1
38 #define CONFIG_ROOTPATH         ""
39 #define CONFIG_GATEWAYIP        192.168.1.1
40 #define CONFIG_NETMASK          255.255.0.0
41 #define CONFIG_HOSTNAME         idmr
42 #define CONFIG_BOOTFILE         "/tftpboot/idmr/uImage"
43 #define CONFIG_PREBOOT          "echo;echo Type \\\"run flash_nfs\\\" to mount root " \
44                                 "filesystem over NFS; echo"
45
46 #define CONFIG_MCFTMR
47
48 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
49         "netdev=eth0\0"                                                 \
50         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
51         "addip=setenv bootargs $(bootargs) "                            \
52                 "ip=$(ipaddr):$(serverip):$(gatewayip):"                \
53                 "$(netmask):$(hostname):$(netdev):off panic=1\0"        \
54         "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0"            \
55         "flash_self=run ramargs addip;bootm $(kernel_addr) "            \
56                 "$(ramdisk_addr)\0"                                     \
57         "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"     \
58         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
59                 "nfsroot=$(serverip):$(rootpath)\0"                     \
60         "ethact=FEC\0   "                                               \
61         "update=prot off ff800000 ff81ffff; era ff800000 ff81ffff; "    \
62                 "cp.b 200000 ff800000 $(filesize);"                     \
63                 "prot on ff800000 ff81ffff\0"                           \
64         "load=tftp 200000 $(u-boot)\0"                                  \
65         "u-boot=/tftpboot/idmr/u-boot.bin\0"                            \
66         ""
67
68
69 /*
70  * BOOTP options
71  */
72 #define CONFIG_BOOTP_BOOTFILESIZE
73 #define CONFIG_BOOTP_BOOTPATH
74 #define CONFIG_BOOTP_GATEWAY
75 #define CONFIG_BOOTP_HOSTNAME
76
77
78 /*
79  * Command line configuration.
80  */
81 #include <config_cmd_default.h>
82
83 #define CONFIG_CMD_PING
84 #define CONFIG_CMD_JFFS2
85 #define CONFIG_CMD_NET
86
87 #undef CONFIG_CMD_LOADS
88 #undef CONFIG_CMD_LOADB
89
90
91 /*
92  * Low Level Configuration Settings
93  * (address mappings, register initial values, etc.)
94  * You should know what you are doing if you make changes here.
95  */
96
97 /*
98  * Configuration for environment, which occupies third sector in flash.
99  */
100 #ifndef CONFIG_MONITOR_IS_IN_RAM
101 #define CONFIG_ENV_ADDR         0xff820000
102 #define CONFIG_ENV_SECT_SIZE    0x10000
103 #define CONFIG_ENV_SIZE         0x2000
104 #define CONFIG_ENV_IS_IN_FLASH
105 #else /* CONFIG_MONITOR_IS_IN_RAM */
106 #define CONFIG_ENV_OFFSET               0x4000
107 #define CONFIG_ENV_SECT_SIZE    0x2000
108 #define CONFIG_ENV_IS_IN_FLASH
109 #endif /* !CONFIG_MONITOR_IS_IN_RAM */
110
111 #define CONFIG_SYS_USE_PPCENV                   /* Environment embedded in sect .ppcenv */
112
113 #define CONFIG_SYS_PROMPT               "=> "
114 #define CONFIG_SYS_LONGHELP                             /* undef to save memory */
115
116 #if defined(CONFIG_CMD_KGDB)
117 #define CONFIG_SYS_CBSIZE               1024            /* Console I/O Buffer Size */
118 #else
119 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size */
120 #endif
121
122 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
123 #define CONFIG_SYS_MAXARGS              16              /* max number of command args */
124 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
125
126 #define CONFIG_SYS_LOAD_ADDR            0x00100000
127
128 #define CONFIG_SYS_MEMTEST_START        0x400
129 #define CONFIG_SYS_MEMTEST_END          0x380000
130
131 #define CONFIG_SYS_HZ                   (50000000 / 64)
132 #define CONFIG_SYS_CLK                  100000000
133
134 #define CONFIG_SYS_MBAR         0x40000000      /* Register Base Addrs */
135
136 /*
137  * Ethernet
138  */
139 #define CONFIG_MCFFEC
140 #ifdef CONFIG_MCFFEC
141 #       define CONFIG_MII               1
142 #       define CONFIG_MII_INIT          1
143 #       define CONFIG_SYS_DISCOVER_PHY
144 #       define CONFIG_SYS_RX_ETH_BUFFER 8
145 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
146
147 #       define CONFIG_SYS_FEC0_PINMUX           0
148 #       define CONFIG_SYS_FEC0_MIIBASE          CONFIG_SYS_FEC0_IOBASE
149 #       define MCFFEC_TOUT_LOOP         50000
150 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
151 #       ifndef CONFIG_SYS_DISCOVER_PHY
152 #               define FECDUPLEX        FULL
153 #               define FECSPEED         _100BASET
154 #       else
155 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
156 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
157 #               endif
158 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
159 #endif
160
161 /*
162  * Definitions for initial stack pointer and data area (in DPRAM)
163  */
164 #define CONFIG_SYS_INIT_RAM_ADDR        0x20000000
165 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000  /* Size of used area in internal SRAM */
166 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
167 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
168
169 /*
170  * Start addresses for the final memory configuration
171  * (Set up by the startup code)
172  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
173  */
174 #define CONFIG_SYS_SDRAM_BASE           0x00000000
175 #define CONFIG_SYS_SDRAM_SIZE           16              /* SDRAM size in MB */
176 #define CONFIG_SYS_FLASH_BASE           0xff800000
177
178 #ifdef CONFIG_MONITOR_IS_IN_RAM
179 #define CONFIG_SYS_MONITOR_BASE 0x20000
180 #else /* !CONFIG_MONITOR_IS_IN_RAM */
181 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
182 #endif /* CONFIG_MONITOR_IS_IN_RAM */
183
184 #define CONFIG_SYS_MONITOR_LEN          0x20000
185 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
186 #define CONFIG_SYS_BOOTPARAMS_LEN       (64*1024)
187
188 /*
189  * For booting Linux, the board info and command line data
190  * have to be in the first 8 MB of memory, since this is
191  * the maximum mapped by the Linux kernel during initialization ??
192  */
193 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
194
195 /* FLASH organization */
196 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
197 #define CONFIG_SYS_MAX_FLASH_SECT       128     /* max number of sectors on one chip */
198 #define CONFIG_SYS_FLASH_ERASE_TOUT     1000
199
200 #define CONFIG_SYS_FLASH_SIZE           0x800000
201 /*
202  * #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE    1
203  */
204
205 /* Cache Configuration */
206 #define CONFIG_SYS_CACHELINE_SIZE       16
207
208 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
209                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
210 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
211                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
212 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV | CF_CACR_INVI)
213 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
214                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
215                                          CF_ACR_EN | CF_ACR_SM_ALL)
216 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_CINV | \
217                                          CF_CACR_DISD | CF_CACR_INVI | \
218                                          CF_CACR_CEIB | CF_CACR_DCM | \
219                                          CF_CACR_EUSP)
220
221 /* Port configuration */
222 #define CONFIG_SYS_FECI2C               0xF0
223
224
225 /* Dynamic MTD partition support */
226 #define CONFIG_CMD_MTDPARTS
227 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
228 #define CONFIG_FLASH_CFI_MTD
229 #define MTDIDS_DEFAULT          "nor0=idmr-0"
230
231 #define MTDPARTS_DEFAULT        "mtdparts=idmr-0:128k(u-boot)," \
232                                                 "64k(env),"     \
233                                                 "640k(kernel)," \
234                                                 "2m(rootfs),"   \
235                                                 "-(user)";
236
237 #if defined(CONFIG_CMD_MII)
238 #error "MII commands don't work on iDMR board and should not be enabled."
239 #endif
240
241 #endif /* _IDMR_H */