include/configs/tx48.h

   1 /*
   2  * tx48.h
   3  *
   4  * Copyright (C) 2012-2014 Lothar Waßmann <LW@KARO-electronics.de>
   5  *
   6  * based on: am335x_evm
   7  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   8  *
   9  * SPDX-License-Identifier:      GPL-2.0
  10  *
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #define CONFIG_AM33XX                   /* must be set before including omap.h */
  17 #define CONFIG_SYS_L2CACHE_OFF
  18
  19 #include <linux/kconfig.h>
  20 #include <linux/sizes.h>
  21 #include <asm/arch/omap.h>
  22
  23 /*
  24  * Ka-Ro TX48 board - SoC configuration
  25  */
  26 #define CONFIG_OMAP
  27 #define CONFIG_AM33XX_GPIO
  28 #define CONFIG_SYS_HZ                   1000    /* Ticks per second */
  29
  30 #ifndef CONFIG_SPL_BUILD
  31 #define CONFIG_SKIP_LOWLEVEL_INIT
  32 #define CONFIG_SHOW_ACTIVITY
  33 #define CONFIG_DISPLAY_CPUINFO
  34 #define CONFIG_DISPLAY_BOARDINFO
  35 #define CONFIG_BOARD_LATE_INIT
  36 #define CONFIG_SYS_GENERIC_BOARD
  37
  38 /* LCD Logo and Splash screen support */
  39 #ifdef CONFIG_LCD
  40 #define CONFIG_VIDEO_DA8XX
  41 #define CONFIG_SPLASH_SCREEN
  42 #define CONFIG_SPLASH_SCREEN_ALIGN
  43 #define CONFIG_AM335X_LCD
  44 #define DAVINCI_LCD_CNTL_BASE           0x4830e000
  45 #define CONFIG_LCD_LOGO
  46 #define LCD_BPP                         LCD_COLOR32
  47 #define CONFIG_CMD_BMP
  48 #define CONFIG_VIDEO_BMP_RLE8
  49 #endif /* CONFIG_LCD */
  50 #endif /* CONFIG_SPL_BUILD */
  51
  52 /* Clock Defines */
  53 #define V_OSCK                          24000000  /* Clock output from T2 */
  54 #define V_SCLK                          V_OSCK
  55
  56 /*
  57  * Memory configuration options
  58  */
  59 #define CONFIG_SYS_SDRAM_DDR3
  60 #define CONFIG_NR_DRAM_BANKS            0x1             /* '1' would be converted to 'y' by define2mk.sed */
  61 #define PHYS_SDRAM_1                    0x80000000      /* SDRAM Bank #1 */
  62 #define CONFIG_MAX_RAM_BANK_SIZE        SZ_1G
  63
  64 #define CONFIG_STACKSIZE                SZ_64K
  65 #define CONFIG_SYS_MALLOC_LEN           SZ_4M
  66
  67 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + SZ_64M)
  68 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + SZ_8M)
  69
  70 #define CONFIG_SYS_CACHELINE_SIZE       64
  71
  72 /*
  73  * U-Boot general configurations
  74  */
  75 #define CONFIG_SYS_LONGHELP
  76 #define CONFIG_SYS_CBSIZE               2048    /* Console I/O buffer size */
  77 #define CONFIG_SYS_PBSIZE \
  78         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  79                                                 /* Print buffer size */
  80 #define CONFIG_SYS_MAXARGS              256     /* Max number of command args */
  81 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  82                                                 /* Boot argument buffer size */
  83 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  84 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  85 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  86
  87 #define CONFIG_SYS_64BIT_VSPRINTF
  88
  89 /*
  90  * Flattened Device Tree (FDT) support
  91 */
  92
  93 /*
  94  * Boot Linux
  95  */
  96 #define xstr(s)                         str(s)
  97 #define str(s)                          #s
  98 #define __pfx(x, s)                     (x##s)
  99 #define _pfx(x, s)                      __pfx(x, s)
 100
 101 #define CONFIG_CMDLINE_TAG
 102 #define CONFIG_SETUP_MEMORY_TAGS
 103 #define CONFIG_BOOTDELAY                3
 104 #define CONFIG_ZERO_BOOTDELAY_CHECK
 105 #define CONFIG_SYS_AUTOLOAD             "no"
 106 #define CONFIG_BOOTFILE                 "uImage"
 107 #define CONFIG_BOOTARGS                 "init=/linuxrc console=ttyO0,115200 ro debug panic=1"
 108 #define CONFIG_BOOTCOMMAND              "run bootcmd_${boot_mode} bootm_cmd"
 109 #define CONFIG_LOADADDR                 83000000
 110 #define CONFIG_FDTADDR                  81000000
 111 #define CONFIG_SYS_LOAD_ADDR            _pfx(0x, CONFIG_LOADADDR)
 112 #define CONFIG_SYS_FDT_ADDR             _pfx(0x, CONFIG_FDTADDR)
 113 #define CONFIG_U_BOOT_IMG_SIZE          SZ_1M
 114
 115 /*
 116  * Extra Environment Settings
 117  */
 118 #define CONFIG_SYS_CPU_CLK_STR          xstr(CONFIG_SYS_MPU_CLK)
 119
 120 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 121         "autostart=no\0"                                                \
 122         "baseboard=stk5-v3\0"                                           \
 123         "bootargs_jffs2=run default_bootargs"                           \
 124         ";setenv bootargs ${bootargs}"                                  \
 125         " root=/dev/mtdblock4 rootfstype=jffs2\0"                       \
 126         "bootargs_mmc=run default_bootargs;setenv bootargs ${bootargs}" \
 127         " root=/dev/mmcblk0p2 rootwait\0"                               \
 128         "bootargs_nfs=run default_bootargs;setenv bootargs ${bootargs}" \
 129         " root=/dev/nfs nfsroot=${nfs_server}:${nfsroot},nolock"        \
 130         " ip=dhcp\0"                                                    \
 131         "bootargs_ubifs=run default_bootargs"                           \
 132         ";setenv bootargs ${bootargs}"                                  \
 133         " ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs\0"           \
 134         "bootcmd_jffs2=setenv autostart no;run bootargs_jffs2"          \
 135         ";nboot linux\0"                                                \
 136         "bootcmd_mmc=setenv autostart no;run bootargs_mmc"              \
 137         ";fatload mmc 0 ${loadaddr} uImage\0"                           \
 138         "bootcmd_nand=setenv autostart no;run bootargs_ubifs"           \
 139         ";nboot linux\0"                                                \
 140         "bootcmd_net=setenv autoload y"                                 \
 141         ";setenv autostart n;run bootargs_nfs"                          \
 142         ";dhcp\0"                                                       \
 143         "bootm_cmd=bootm ${loadaddr} - ${fdtaddr}\0"                    \
 144         "boot_mode=nand\0"                                              \
 145         "cpu_clk=" CONFIG_SYS_CPU_CLK_STR "\0"                          \
 146         "default_bootargs=setenv bootargs " CONFIG_BOOTARGS             \
 147         " ${append_bootargs}\0"                                         \
 148         "fdtaddr=" xstr(CONFIG_FDTADDR) "\0"                            \
 149         "fdtsave=fdt resize;nand erase.part dtb"                        \
 150         ";nand write ${fdtaddr} dtb ${fdtsize}\0"                       \
 151         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
 152         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
 153         "nfsroot=/tftpboot/rootfs\0"                                    \
 154         "otg_mode=device\0"                                             \
 155         "touchpanel=tsc2007\0"                                          \
 156         "video_mode=VGA\0"
 157
 158 #define MTD_NAME                        "omap2-nand.0"
 159 #define MTDIDS_DEFAULT                  "nand0=" MTD_NAME
 160
 161 /*
 162  * Serial Driver
 163  */
 164 #define CONFIG_SYS_NS16550
 165 #define CONFIG_SYS_NS16550_SERIAL
 166 #define CONFIG_SYS_NS16550_MEM32
 167 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
 168 #define CONFIG_SYS_NS16550_CLK          48000000
 169 #define CONFIG_SYS_NS16550_COM1         0x44e09000      /* UART0 */
 170 #define CONFIG_SYS_NS16550_COM2         0x48022000      /* UART1 */
 171 #define CONFIG_SYS_NS16550_COM6         0x481aa000      /* UART5 */
 172
 173 #define CONFIG_SYS_NS16550_COM3         0x481aa000      /* UART2 */
 174 #define CONFIG_SYS_NS16550_COM4         0x481aa000      /* UART3 */
 175 #define CONFIG_SYS_NS16550_COM5         0x481aa000      /* UART4 */
 176 #define CONFIG_CONS_INDEX               1               /* one based! */
 177 #define CONFIG_BAUDRATE                 115200          /* Default baud rate */
 178 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, }
 179 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 180
 181 /*
 182  * Ethernet Driver
 183  */
 184 #ifdef CONFIG_CMD_NET
 185 #define CONFIG_DRIVER_TI_CPSW
 186 #define CONFIG_PHY_GIGE
 187 #endif
 188
 189 /*
 190  * NAND flash driver
 191  */
 192 #ifdef CONFIG_NAND
 193 #define CONFIG_NAND_OMAP_GPMC
 194 #ifndef CONFIG_SPL_BUILD
 195 #define CONFIG_SYS_GPMC_PREFETCH_ENABLE
 196 #endif
 197 #define GPMC_NAND_ECC_LP_x8_LAYOUT
 198 #define GPMC_NAND_HW_ECC_LAYOUT_KERNEL  GPMC_NAND_HW_ECC_LAYOUT
 199 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x20000
 200 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 201 #define CONFIG_SYS_NAND_OOBSIZE         64
 202 #define CONFIG_SYS_NAND_ECCSIZE         512
 203 #define CONFIG_SYS_NAND_ECCBYTES        14
 204 #define CONFIG_SYS_NAND_MAX_CHIPS       0x1
 205 #define CONFIG_SYS_NAND_MAXBAD          20 /* Max. number of bad blocks guaranteed by manufacturer */
 206 #define CONFIG_SYS_MAX_NAND_DEVICE      0x1
 207 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 208 #ifdef CONFIG_ENV_IS_IN_NAND
 209 #define CONFIG_ENV_OVERWRITE
 210 #define CONFIG_ENV_OFFSET               (CONFIG_U_BOOT_IMG_SIZE + CONFIG_SYS_NAND_U_BOOT_OFFS)
 211 #define CONFIG_ENV_SIZE                 SZ_128K
 212 #define CONFIG_ENV_RANGE                0x60000
 213 #endif /* CONFIG_ENV_IS_IN_NAND */
 214 #define CONFIG_SYS_NAND_BASE            0x00100000
 215 #define CONFIG_SYS_NAND_SIZE            SZ_128M
 216 #define NAND_BASE                       CONFIG_SYS_NAND_BASE
 217 #endif /* CONFIG_CMD_NAND */
 218
 219 /*
 220  * MMC Driver
 221  */
 222 #ifdef CONFIG_CMD_MMC
 223 #define CONFIG_CMD_FAT
 224 #define CONFIG_FAT_WRITE
 225 #define CONFIG_CMD_EXT2
 226
 227 /*
 228  * Environments on MMC
 229  */
 230 #ifdef CONFIG_ENV_IS_IN_MMC
 231 #define CONFIG_SYS_MMC_ENV_DEV          0
 232 #define CONFIG_ENV_OVERWRITE
 233 /* Associated with the MMC layout defined in mmcops.c */
 234 #define CONFIG_ENV_OFFSET               SZ_1K
 235 #define CONFIG_ENV_SIZE                 (SZ_128K - CONFIG_ENV_OFFSET)
 236 #define CONFIG_DYNAMIC_MMC_DEVNO
 237 #endif /* CONFIG_ENV_IS_IN_MMC */
 238 #endif /* CONFIG_CMD_MMC */
 239
 240 #ifdef CONFIG_ENV_IS_NOWHERE
 241 #define CONFIG_ENV_SIZE                 SZ_4K
 242 #endif
 243
 244 #ifdef CONFIG_ENV_OFFSET_REDUND
 245 #define MTDPARTS_DEFAULT                "mtdparts=" MTD_NAME ":"        \
 246         "128k(u-boot-spl),"                                             \
 247         "1m(u-boot),"                                                   \
 248         xstr(CONFIG_ENV_RANGE)                                          \
 249         "(env),"                                                        \
 250         xstr(CONFIG_ENV_RANGE)                                          \
 251         "(env2),6m(linux),32m(rootfs),89216k(userfs),512k@0x7f00000(dtb),512k@0x7f80000(bbt)ro"
 252 #else
 253 #define MTDPARTS_DEFAULT                "mtdparts=" MTD_NAME ":"        \
 254         "128k(u-boot-spl),"                                             \
 255         "1m(u-boot),"                                                   \
 256         xstr(CONFIG_ENV_RANGE)                                          \
 257         "(env),6m(linux),32m(rootfs),89600k(userfs),512k@0x7f00000(dtb),512k@0x7f80000(bbt)ro"
 258 #endif
 259
 260 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 261 #define SRAM0_SIZE                      SZ_64K
 262 #define OCMC_SRAM_BASE                  0x40300000
 263 #define CONFIG_SPL_STACK                (OCMC_SRAM_BASE + 0xb800)
 264 #define CONFIG_SYS_INIT_SP_ADDR         (PHYS_SDRAM_1 + SZ_32K)
 265
 266  /* Platform/Board specific defs */
 267 #define CONFIG_SYS_TIMERBASE            0x48040000      /* Use Timer2 */
 268 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 269
 270 /* Defines for SPL */
 271 #define CONFIG_SPL_FRAMEWORK
 272 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE)
 273 #define CONFIG_SPL_GPIO_SUPPORT
 274 #ifdef CONFIG_NAND_OMAP_GPMC
 275 #define CONFIG_SPL_NAND_SUPPORT
 276 #define CONFIG_SPL_NAND_DRIVERS
 277 #define CONFIG_SPL_NAND_BASE
 278 #define CONFIG_SPL_NAND_ECC
 279 #define CONFIG_SPL_NAND_AM33XX_BCH
 280 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 281 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE /   \
 282                                         CONFIG_SYS_NAND_PAGE_SIZE)
 283 #define CONFIG_SYS_NAND_BLOCK_SIZE      SZ_128K
 284 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 285 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 286                                          10, 11, 12, 13, 14, 15, 16, 17, \
 287                                          18, 19, 20, 21, 22, 23, 24, 25, \
 288                                          26, 27, 28, 29, 30, 31, 32, 33, \
 289                                          34, 35, 36, 37, 38, 39, 40, 41, \
 290                                          42, 43, 44, 45, 46, 47, 48, 49, \
 291                                          50, 51, 52, 53, 54, 55, 56, 57, }
 292 #endif
 293
 294 #define CONFIG_SPL_BSS_START_ADDR       PHYS_SDRAM_1
 295 #define CONFIG_SPL_BSS_MAX_SIZE         SZ_512K
 296
 297 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 298
 299 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 300 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 301 #define CONFIG_SPL_SERIAL_SUPPORT
 302 #define CONFIG_SPL_YMODEM_SUPPORT
 303 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/omap-common/u-boot-spl.lds"
 304
 305 /*
 306  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 307  * 64 bytes before this address should be set aside for u-boot.img's
 308  * header. That is 0x800FFFC0--0x80100000 should not be used for any
 309  * other needs.
 310  */
 311 #define CONFIG_SYS_SPL_MALLOC_START     (PHYS_SDRAM_1 + SZ_2M + SZ_32K)
 312 #define CONFIG_SYS_SPL_MALLOC_SIZE      SZ_1M
 313
 314 #endif  /* __CONFIG_H */