kconfig: set 'default y' for all CMD_* options defined in config_cmd_default.h
[karo-tx-uboot.git] / include / configs / tx6.h
1 /*
2  * Copyright (C) 2012-2015 <LW@KARO-electronics.de>
3  *
4  * SPDX-License-Identifier:      GPL-2.0
5  *
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #include <linux/sizes.h>
12 #include <asm/arch/imx-regs.h>
13 #include "mx6_common.h"
14
15 /*
16  * Ka-Ro TX6 board - SoC configuration
17  */
18 #define CONFIG_SYS_MX6_HCLK             24000000
19 #define CONFIG_SYS_MX6_CLK32            32768
20 #define CONFIG_SYS_HZ                   1000            /* Ticks per second */
21 #define CONFIG_SHOW_ACTIVITY
22 #define CONFIG_ARCH_CPU_INIT
23 #define CONFIG_DISPLAY_BOARDINFO
24 #define CONFIG_BOARD_LATE_INIT
25 #define CONFIG_BOARD_EARLY_INIT_F
26 #define CONFIG_SYS_GENERIC_BOARD
27
28 #ifndef CONFIG_TX6_UBOOT_MFG
29 /* LCD Logo and Splash screen support */
30 #ifdef CONFIG_LCD
31 #define CONFIG_SPLASH_SCREEN
32 #define CONFIG_SPLASH_SCREEN_ALIGN
33 #define CONFIG_VIDEO_IPUV3
34 #define CONFIG_IPUV3_CLK                (CONFIG_SYS_SDRAM_CLK * 1000000 / 2)
35 #define CONFIG_LCD_LOGO
36 #define LCD_BPP                         LCD_COLOR32
37 #define CONFIG_CMD_BMP
38 #define CONFIG_VIDEO_BMP_RLE8
39 #endif /* CONFIG_LCD */
40 #endif /* CONFIG_TX6_UBOOT_MFG */
41
42 /*
43  * Memory configuration options
44  */
45 #define CONFIG_NR_DRAM_BANKS            0x1             /* # of SDRAM banks */
46 #define PHYS_SDRAM_1                    0x10000000      /* Base address of bank 1 */
47 #ifdef CONFIG_SYS_SDRAM_BUS_WIDTH
48 #define PHYS_SDRAM_1_WIDTH              CONFIG_SYS_SDRAM_BUS_WIDTH
49 #elif defined(CONFIG_SYS_SDRAM_BUS_WIDTH_32)
50 #define PHYS_SDRAM_1_WIDTH              32
51 #elif defined(CONFIG_SYS_SDRAM_BUS_WIDTH_16)
52 #define PHYS_SDRAM_1_WIDTH              16
53 #else
54 #define PHYS_SDRAM_1_WIDTH              64
55 #endif
56 #define PHYS_SDRAM_1_SIZE               (SZ_512M / 32 * PHYS_SDRAM_1_WIDTH)
57 #ifdef CONFIG_MX6Q
58 #define CONFIG_SYS_SDRAM_CLK            528
59 #else
60 #define CONFIG_SYS_SDRAM_CLK            400
61 #endif
62 #define CONFIG_STACKSIZE                SZ_128K
63 #define CONFIG_SYS_MALLOC_LEN           SZ_8M
64 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1    /* Memtest start address */
65 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + SZ_4M)
66
67 /*
68  * U-Boot general configurations
69  */
70 #define CONFIG_SYS_LONGHELP
71 #if defined(CONFIG_MX6Q)
72 #define CONFIG_SYS_PROMPT               "TX6Q U-Boot > "
73 #elif defined(CONFIG_MX6DL)
74 #define CONFIG_SYS_PROMPT               "TX6DL U-Boot > "
75 #elif defined(CONFIG_MX6S)
76 #define CONFIG_SYS_PROMPT               "TX6S U-Boot > "
77 #else
78 #error Unsupported i.MX6 processor variant
79 #endif
80 #define CONFIG_SYS_CBSIZE               2048    /* Console I/O buffer size */
81 #define CONFIG_SYS_PBSIZE                                               \
82         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
83                                                 /* Print buffer size */
84 #define CONFIG_SYS_MAXARGS              256     /* Max number of command args */
85 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
86                                                 /* Boot argument buffer size */
87 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
88 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
89 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
90
91 #define CONFIG_SYS_64BIT_VSPRINTF
92
93 /*
94  * Flattened Device Tree (FDT) support
95 */
96 #ifdef CONFIG_OF_LIBFDT
97 #ifdef CONFIG_TX6_NAND
98 #endif
99 #endif /* CONFIG_OF_LIBFDT */
100
101 /*
102  * Boot Linux
103  */
104 #define xstr(s)                         str(s)
105 #define str(s)                          #s
106 #define __pfx(x, s)                     (x##s)
107 #define _pfx(x, s)                      __pfx(x, s)
108
109 #define CONFIG_CMDLINE_TAG
110 #define CONFIG_INITRD_TAG
111 #define CONFIG_SETUP_MEMORY_TAGS
112 #ifndef CONFIG_TX6_UBOOT_MFG
113 #define CONFIG_BOOTDELAY                1
114 #else
115 #define CONFIG_BOOTDELAY                0
116 #endif
117 #define CONFIG_ZERO_BOOTDELAY_CHECK
118 #define CONFIG_SYS_AUTOLOAD             "no"
119 #ifndef CONFIG_TX6_UBOOT_MFG
120 #define CONFIG_BOOTFILE                 "uImage"
121 #define CONFIG_BOOTARGS                 "init=/linuxrc console=ttymxc0,115200 ro debug panic=1"
122 #define CONFIG_BOOTCOMMAND              "run bootcmd_${boot_mode} bootm_cmd"
123 #else
124 #define CONFIG_BOOTCOMMAND              "env import " xstr(CONFIG_BOOTCMD_MFG_LOADADDR) ";run bootcmd_mfg"
125 #define CONFIG_BOOTCMD_MFG_LOADADDR     10500000
126 #define CONFIG_DELAY_ENVIRONMENT
127 #endif /* CONFIG_TX6_UBOOT_MFG */
128 #define CONFIG_LOADADDR                 18000000
129 #define CONFIG_FDTADDR                  11000000
130 #define CONFIG_SYS_LOAD_ADDR            _pfx(0x, CONFIG_LOADADDR)
131 #define CONFIG_SYS_FDT_ADDR             _pfx(0x, CONFIG_FDTADDR)
132 #ifndef CONFIG_SYS_LVDS_IF
133 #define DEFAULT_VIDEO_MODE              "VGA"
134 #else
135 #define DEFAULT_VIDEO_MODE              "HSD100PXN1"
136 #endif
137
138 /*
139  * Extra Environments
140  */
141 #ifndef CONFIG_TX6_UBOOT_MFG
142 #ifdef CONFIG_ENV_IS_NOWHERE
143 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
144         "autostart=no\0"                                                \
145         "autoload=no\0"                                                 \
146         "bootdelay=-1\0"                                                \
147         "fdtaddr=" xstr(CONFIG_FDTADDR) "\0"                            \
148         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
149         "mtdparts=" MTDPARTS_DEFAULT "\0"
150 #else
151 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
152         "autostart=no\0"                                                \
153         "baseboard=stk5-v3\0"                                           \
154         "bootargs_jffs2=run default_bootargs;set bootargs ${bootargs}"  \
155         " root=/dev/mtdblock3 rootfstype=jffs2\0"                       \
156         "bootargs_mmc=run default_bootargs;set bootargs ${bootargs}"    \
157         MMC_ROOT_STR                                                    \
158         "bootargs_nfs=run default_bootargs;set bootargs ${bootargs}"    \
159         " root=/dev/nfs nfsroot=${nfs_server}:${nfsroot},nolock"        \
160         " ip=dhcp\0"                                                    \
161         "bootargs_ubifs=run default_bootargs;set bootargs ${bootargs}"  \
162         " ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs\0"           \
163         "bootcmd_jffs2=set autostart no;run bootargs_jffs2"             \
164         ";nboot linux\0"                                                \
165         "bootcmd_mmc=set autostart no;run bootargs_mmc"                 \
166         ";fatload mmc 0 ${loadaddr} uImage\0"                           \
167         CONFIG_SYS_BOOT_CMD_NAND                                        \
168         "bootcmd_net=set autoload y;set autostart n;run bootargs_nfs"   \
169         ";dhcp\0"                                                       \
170         "bootm_cmd=bootm ${loadaddr} - ${fdtaddr}\0"                    \
171         "boot_mode=" CONFIG_SYS_DEFAULT_BOOT_MODE "\0"                  \
172         "cpu_clk=800\0"                                                 \
173         "default_bootargs=set bootargs " CONFIG_BOOTARGS                \
174         " ${append_bootargs}\0"                                         \
175         "fdtaddr=" xstr(CONFIG_FDTADDR) "\0"                            \
176         CONFIG_SYS_FDTSAVE_CMD                                          \
177         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
178         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
179         "nfsroot=/tftpboot/rootfs\0"                                    \
180         "otg_mode=device\0"                                             \
181         ROOTPART_UUID_STR                                               \
182         "touchpanel=tsc2007\0"                                          \
183         "video_mode=" DEFAULT_VIDEO_MODE "\0"
184 #endif /*  CONFIG_ENV_IS_NOWHERE */
185 #endif /*  CONFIG_TX6_UBOOT_MFG */
186
187 #ifdef CONFIG_TX6_NAND
188 #define CONFIG_SYS_DEFAULT_BOOT_MODE "nand"
189 #define CONFIG_SYS_BOOT_CMD_NAND                                        \
190         "bootcmd_nand=set autostart no;run bootargs_ubifs;nboot linux\0"
191 #define CONFIG_SYS_FDTSAVE_CMD                                          \
192         "fdtsave=fdt resize;nand erase.part dtb"                        \
193         ";nand write ${fdtaddr} dtb ${fdtsize}\0"
194 #define MTD_NAME                        "gpmi-nand"
195 #define MTDIDS_DEFAULT                  "nand0=" MTD_NAME
196 #define CONFIG_SYS_NAND_ONFI_DETECTION
197 #define MMC_ROOT_STR " root=/dev/mmcblk0p2 rootwait\0"
198 #define ROOTPART_UUID_STR ""
199 #else
200 #define CONFIG_SYS_DEFAULT_BOOT_MODE "mmc"
201 #define CONFIG_SYS_BOOT_CMD_NAND ""
202 #define CONFIG_SYS_FDTSAVE_CMD                                          \
203         "fdtsave=mmc open 0 1;mmc write ${fdtaddr} "                    \
204         xstr(CONFIG_SYS_DTB_BLKNO) " 80;mmc close 0 1\0"
205 #define MMC_ROOT_STR " root=PARTUUID=${rootpart_uuid} rootwait\0"
206 #define ROOTPART_UUID_STR "rootpart_uuid=0cc66cc0-02\0"
207 #define MTD_NAME                        ""
208 #define MTDIDS_DEFAULT                  ""
209 #ifdef CONFIG_SUPPORT_EMMC_BOOT
210 #endif
211 #endif /* CONFIG_TX6_NAND */
212
213 /*
214  * Serial Driver
215  */
216 #define CONFIG_MXC_UART
217 #define CONFIG_MXC_UART_BASE            UART1_BASE
218 #define CONFIG_BAUDRATE                 115200          /* Default baud rate */
219 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, }
220 #define CONFIG_SYS_CONSOLE_INFO_QUIET
221
222 /*
223  * GPIO driver
224  */
225 #define CONFIG_MXC_GPIO
226
227 /*
228  * Ethernet Driver
229  */
230 #ifdef CONFIG_FEC_MXC
231 /* This is required for the FEC driver to work with cache enabled */
232 #define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
233
234 #define IMX_FEC_BASE                    ENET_BASE_ADDR
235 #define CONFIG_FEC_XCV_TYPE             RMII
236 #endif
237
238 /*
239  * I2C Configs
240  */
241 #ifdef CONFIG_SYS_I2C
242 #define CONFIG_SYS_I2C_BASE             I2C1_BASE_ADDR
243 #define CONFIG_SYS_I2C_SPEED            400000
244 #if defined(CONFIG_TX6_REV)
245 #if CONFIG_TX6_REV == 0x1
246 #define CONFIG_SYS_I2C_SLAVE            0x3c
247 #define CONFIG_LTC3676
248 #elif CONFIG_TX6_REV == 0x2
249 #define CONFIG_SYS_I2C_SLAVE            0x32
250 #define CONFIG_RN5T618
251 #elif CONFIG_TX6_REV == 0x3
252 #define CONFIG_SYS_I2C_SLAVE            0x33
253 #define CONFIG_RN5T567
254 #else
255 #error Unsupported TX6 module revision
256 #endif
257 #endif /* CONFIG_TX6_REV */
258 /* autodetect which PMIC is present to derive TX6_REV */
259 #define CONFIG_LTC3676                  /* TX6_REV == 1 */
260 #define CONFIG_RN5T567                  /* TX6_REV == 3 */
261 #endif /* CONFIG_CMD_I2C */
262
263 #define CONFIG_ENV_OVERWRITE
264
265 /*
266  * NAND flash driver
267  */
268 #ifdef CONFIG_TX6_NAND
269 #define CONFIG_SYS_MXS_DMA_CHANNEL      4
270 #define CONFIG_SYS_MAX_FLASH_BANKS      0x1
271 #define CONFIG_SYS_NAND_MAX_CHIPS       0x1
272 #define CONFIG_SYS_MAX_NAND_DEVICE      0x1
273 #define CONFIG_SYS_NAND_BASE            0x00000000
274 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
275
276 #define CONFIG_ENV_OFFSET               (CONFIG_U_BOOT_IMG_SIZE + CONFIG_SYS_NAND_U_BOOT_OFFS)
277 #define CONFIG_ENV_SIZE                 SZ_128K
278 #define CONFIG_ENV_RANGE                (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
279 #else
280 #undef CONFIG_ENV_IS_IN_NAND
281 #endif /* CONFIG_TX6_NAND */
282
283 #ifdef CONFIG_ENV_OFFSET_REDUND
284 #define CONFIG_SYS_ENV_PART_STR         xstr(CONFIG_SYS_ENV_PART_SIZE)  \
285         "(env),"                                                        \
286         xstr(CONFIG_SYS_ENV_PART_SIZE)                                  \
287         "(env2),"
288 #define CONFIG_SYS_USERFS_PART_STR      xstr(CONFIG_SYS_USERFS_PART_SIZE) "(userfs)"
289 #else
290 #define CONFIG_SYS_ENV_PART_STR         xstr(CONFIG_SYS_ENV_PART_SIZE)  \
291         "(env),"
292 #define CONFIG_SYS_USERFS_PART_STR      xstr(CONFIG_SYS_USERFS_PART_SIZE2) "(userfs)"
293 #endif /* CONFIG_ENV_OFFSET_REDUND */
294
295 /*
296  * MMC Driver
297  */
298 #ifdef CONFIG_FSL_ESDHC
299 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
300 #endif
301 #ifdef CONFIG_CMD_MMC
302 #define CONFIG_DOS_PARTITION
303 #define CONFIG_CMD_FAT
304 #define CONFIG_FAT_WRITE
305 #define CONFIG_CMD_EXT2
306
307 /*
308  * Environments on MMC
309  */
310 #ifdef CONFIG_ENV_IS_IN_MMC
311 #define CONFIG_SYS_MMC_ENV_DEV          0
312 #define CONFIG_SYS_MMC_ENV_PART         0x1
313 #define CONFIG_DYNAMIC_MMC_DEVNO
314 #endif /* CONFIG_ENV_IS_IN_MMC */
315 #else
316 #undef CONFIG_ENV_IS_IN_MMC
317 #endif /* CONFIG_CMD_MMC */
318
319 #ifdef CONFIG_ENV_IS_NOWHERE
320 #undef CONFIG_ENV_SIZE
321 #define CONFIG_ENV_SIZE                 SZ_4K
322 #endif
323
324 #ifdef CONFIG_TX6_NAND
325 #define MTDPARTS_DEFAULT                "mtdparts=" MTD_NAME ":"        \
326         xstr(CONFIG_SYS_U_BOOT_PART_SIZE)                               \
327         "@" xstr(CONFIG_SYS_NAND_U_BOOT_OFFS)                           \
328         "(u-boot),"                                                     \
329         CONFIG_SYS_ENV_PART_STR                                         \
330         "6m(linux),32m(rootfs)," CONFIG_SYS_USERFS_PART_STR ","         \
331         xstr(CONFIG_SYS_DTB_PART_SIZE)                                  \
332         "@" xstr(CONFIG_SYS_NAND_DTB_OFFSET) "(dtb),"                   \
333         xstr(CONFIG_SYS_NAND_BBT_SIZE)                                  \
334         "@" xstr(CONFIG_SYS_NAND_BBT_OFFSET) "(bbt)ro"
335 #else
336 #define MTDPARTS_DEFAULT                ""
337 #endif
338
339 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
340 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
341                                         GENERATED_GBL_DATA_SIZE)
342
343 #endif /* __CONFIG_H */