include/configs/wandboard.h

   1 /*
   2  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Wandboard.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  15 #define CONFIG_SPL_MMC_SUPPORT
  16 #include "imx6_spl.h"
  17
  18 #define MACH_TYPE_WANDBOARD             4412
  19 #define CONFIG_MACH_TYPE                MACH_TYPE_WANDBOARD
  20
  21 /* Size of malloc() pool */
  22 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  23
  24 #define CONFIG_BOARD_EARLY_INIT_F
  25 #define CONFIG_BOARD_LATE_INIT
  26 #define CONFIG_MXC_GPIO
  27
  28 #define CONFIG_MXC_UART
  29 #define CONFIG_MXC_UART_BASE            UART1_BASE
  30
  31 /* allow to overwrite serial and ethaddr */
  32 #define CONFIG_ENV_OVERWRITE
  33 #define CONFIG_CONS_INDEX               1
  34 #define CONFIG_BAUDRATE                 115200
  35
  36 /* Command definition */
  37
  38 #define CONFIG_CMD_BMODE
  39 #define CONFIG_CMD_SETEXPR
  40
  41 #define CONFIG_BOOTDELAY                5
  42
  43 #define CONFIG_SYS_MEMTEST_START        0x10000000
  44 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  45 #define CONFIG_LOADADDR                 0x12000000
  46 #define CONFIG_SYS_TEXT_BASE            0x17800000
  47
  48 /* I2C Configs */
  49 #define CONFIG_CMD_I2C
  50 #define CONFIG_SYS_I2C
  51 #define CONFIG_SYS_I2C_MXC
  52 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  53 #define CONFIG_SYS_I2C_SPEED            100000
  54
  55 /* MMC Configuration */
  56 #define CONFIG_FSL_ESDHC
  57 #define CONFIG_FSL_USDHC
  58 #define CONFIG_SYS_FSL_USDHC_NUM        2
  59 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  60
  61 #define CONFIG_MMC
  62 #define CONFIG_CMD_MMC
  63 #define CONFIG_GENERIC_MMC
  64 #define CONFIG_BOUNCE_BUFFER
  65 #define CONFIG_CMD_EXT2
  66 #define CONFIG_CMD_FAT
  67 #define CONFIG_DOS_PARTITION
  68
  69 /* USB Configs */
  70 #define CONFIG_CMD_USB
  71 #define CONFIG_USB_EHCI
  72 #define CONFIG_USB_EHCI_MX6
  73 #define CONFIG_USB_STORAGE
  74 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  75 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  76 #define CONFIG_MXC_USB_FLAGS            0
  77
  78 /* Ethernet Configuration */
  79 #define CONFIG_CMD_PING
  80 #define CONFIG_CMD_DHCP
  81 #define CONFIG_CMD_MII
  82 #define CONFIG_CMD_NET
  83 #define CONFIG_FEC_MXC
  84 #define CONFIG_MII
  85 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  86 #define CONFIG_FEC_XCV_TYPE             RGMII
  87 #define CONFIG_ETHPRIME                 "FEC"
  88 #define CONFIG_FEC_MXC_PHYADDR          1
  89 #define CONFIG_PHYLIB
  90 #define CONFIG_PHY_ATHEROS
  91
  92 /* Framebuffer */
  93 #define CONFIG_VIDEO
  94 #define CONFIG_VIDEO_IPUV3
  95 #define CONFIG_CFB_CONSOLE
  96 #define CONFIG_VGA_AS_SINGLE_DEVICE
  97 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  98 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  99 #define CONFIG_VIDEO_BMP_RLE8
 100 #define CONFIG_SPLASH_SCREEN
 101 #define CONFIG_SPLASH_SCREEN_ALIGN
 102 #define CONFIG_BMP_16BPP
 103 #define CONFIG_VIDEO_LOGO
 104 #define CONFIG_VIDEO_BMP_LOGO
 105 #define CONFIG_IPUV3_CLK 260000000
 106 #define CONFIG_CMD_HDMIDETECT
 107 #define CONFIG_IMX_HDMI
 108 #define CONFIG_IMX_VIDEO_SKIP
 109
 110 #define CONFIG_CMD_FUSE
 111 #ifdef CONFIG_CMD_FUSE
 112 #define CONFIG_MXC_OCOTP
 113 #endif
 114
 115 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 116 #define CONFIG_EXTRA_ENV_SETTINGS \
 117         "script=boot.scr\0" \
 118         "image=zImage\0" \
 119         "console=ttymxc0\0" \
 120         "splashpos=m,m\0" \
 121         "fdtfile=undefined\0" \
 122         "fdt_high=0xffffffff\0" \
 123         "initrd_high=0xffffffff\0" \
 124         "fdt_addr=0x18000000\0" \
 125         "boot_fdt=try\0" \
 126         "ip_dyn=yes\0" \
 127         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 128         "mmcpart=1\0" \
 129         "mmcroot=/dev/mmcblk2p2 rootwait rw\0" \
 130         "update_sd_firmware_filename=u-boot.imx\0" \
 131         "update_sd_firmware=" \
 132                 "if test ${ip_dyn} = yes; then " \
 133                         "setenv get_cmd dhcp; " \
 134                 "else " \
 135                         "setenv get_cmd tftp; " \
 136                 "fi; " \
 137                 "if mmc dev ${mmcdev}; then "   \
 138                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 139                                 "setexpr fw_sz ${filesize} / 0x200; " \
 140                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 141                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 142                         "fi; "  \
 143                 "fi\0" \
 144         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 145                 "root=${mmcroot}; run videoargs\0" \
 146         "videoargs=" \
 147                 "setenv nextcon 0; " \
 148                 "if hdmidet; then " \
 149                         "setenv bootargs ${bootargs} " \
 150                                 "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
 151                                         "if=RGB24; " \
 152                         "setenv fbmen fbmem=28M; " \
 153                         "setexpr nextcon ${nextcon} + 1; " \
 154                 "else " \
 155                         "echo - no HDMI monitor;" \
 156                 "fi; " \
 157                 "i2c dev 1; " \
 158                 "if i2c probe 0x10; then " \
 159                         "setenv bootargs ${bootargs} " \
 160                                 "video=mxcfb${nextcon}:dev=lcd,800x480@60," \
 161                                         "if=RGB666,bpp=32; " \
 162                         "if test 0 -eq ${nextcon}; then " \
 163                                 "setenv fbmem fbmem=10M; " \
 164                         "else " \
 165                                 "setenv fbmem ${fbmem},10M; " \
 166                         "fi; " \
 167                         "setexpr nextcon ${nextcon} + 1; " \
 168                 "else " \
 169                         "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
 170                 "fi; " \
 171                 "setenv bootargs ${bootargs} ${fbmem}\0" \
 172         "loadbootscript=" \
 173                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 174         "bootscript=echo Running bootscript from mmc ...; " \
 175                 "source\0" \
 176         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 177         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
 178         "mmcboot=echo Booting from mmc ...; " \
 179                 "run mmcargs; " \
 180                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 181                         "if run loadfdt; then " \
 182                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 183                         "else " \
 184                                 "if test ${boot_fdt} = try; then " \
 185                                         "bootz; " \
 186                                 "else " \
 187                                         "echo WARN: Cannot load the DT; " \
 188                                 "fi; " \
 189                         "fi; " \
 190                 "else " \
 191                         "bootz; " \
 192                 "fi;\0" \
 193         "netargs=setenv bootargs console=${console},${baudrate} " \
 194                 "root=/dev/nfs " \
 195         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 196                 "netboot=echo Booting from net ...; " \
 197                 "run netargs; " \
 198                 "if test ${ip_dyn} = yes; then " \
 199                         "setenv get_cmd dhcp; " \
 200                 "else " \
 201                         "setenv get_cmd tftp; " \
 202                 "fi; " \
 203                 "${get_cmd} ${image}; " \
 204                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 205                         "if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \
 206                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 207                         "else " \
 208                                 "if test ${boot_fdt} = try; then " \
 209                                         "bootz; " \
 210                                 "else " \
 211                                         "echo WARN: Cannot load the DT; " \
 212                                 "fi; " \
 213                         "fi; " \
 214                 "else " \
 215                         "bootz; " \
 216                 "fi;\0" \
 217         "findfdt="\
 218                 "if test $board_rev = MX6Q ; then " \
 219                         "setenv fdtfile imx6q-wandboard.dtb; fi; " \
 220                 "if test $board_rev = MX6DL ; then " \
 221                         "setenv fdtfile imx6dl-wandboard.dtb; fi; " \
 222                 "if test $fdtfile = undefined; then " \
 223                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 224
 225 #define CONFIG_BOOTCOMMAND \
 226            "run findfdt; " \
 227            "mmc dev ${mmcdev}; if mmc rescan; then " \
 228                    "if run loadbootscript; then " \
 229                            "run bootscript; " \
 230                    "else " \
 231                            "if run loadimage; then " \
 232                                    "run mmcboot; " \
 233                            "else run netboot; " \
 234                            "fi; " \
 235                    "fi; " \
 236            "else run netboot; fi"
 237
 238 /* Miscellaneous configurable options */
 239 #define CONFIG_SYS_LONGHELP
 240 #define CONFIG_SYS_HUSH_PARSER
 241 #define CONFIG_AUTO_COMPLETE
 242 #define CONFIG_SYS_CBSIZE               256
 243 #define CONFIG_SYS_MAXARGS             16
 244 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 245
 246 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 247
 248 #define CONFIG_CMDLINE_EDITING
 249
 250 /* Physical Memory Map */
 251 #define CONFIG_NR_DRAM_BANKS            1
 252 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 253
 254 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 255 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 256 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 257
 258 #define CONFIG_SYS_INIT_SP_OFFSET \
 259         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 260 #define CONFIG_SYS_INIT_SP_ADDR \
 261         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 262
 263 /* Environment organization */
 264 #define CONFIG_ENV_SIZE                 (8 * 1024)
 265
 266 #define CONFIG_ENV_IS_IN_MMC
 267 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 268 #define CONFIG_SYS_MMC_ENV_DEV          0
 269
 270 #define CONFIG_OF_LIBFDT
 271 #define CONFIG_CMD_BOOTZ
 272
 273 #ifndef CONFIG_SYS_DCACHE_OFF
 274 #define CONFIG_CMD_CACHE
 275 #endif
 276
 277 #endif                         /* __CONFIG_H * */