include/configs/warp.h

   1 /*
   2  * Copyright (C) 2014 O.S. Systems Software LTDA.
   3  * Copyright (C) 2014 Kynetics LLC.
   4  * Copyright (C) 2014 Revolution Robotics, Inc.
   5  *
   6  * Author: Otavio Salvador <otavio@ossystems.com.br>
   7  *
   8  * Configuration settings for the WaRP Board
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include "mx6_common.h"
  17
  18 /* Size of malloc() pool */
  19 #define CONFIG_SYS_MALLOC_LEN           (35 * SZ_1M) /* Increase due to DFU */
  20
  21 #define CONFIG_BOARD_EARLY_INIT_F
  22 #define CONFIG_BOARD_LATE_INIT
  23
  24 #define CONFIG_MXC_UART
  25 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  26
  27 /* MMC Configs */
  28 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  29 #define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
  30 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
  31 #define CONFIG_SUPPORT_EMMC_BOOT
  32
  33 /* Command definition */
  34 #undef CONFIG_CMD_NET
  35 #undef CONFIG_CMD_NFS
  36
  37 /* Watchdog */
  38 #define CONFIG_HW_WATCHDOG
  39 #define CONFIG_IMX_WATCHDOG
  40 #define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */
  41
  42 #define CONFIG_SYS_MEMTEST_START        0x80000000
  43 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + SZ_256M)
  44
  45 #define CONFIG_STACKSIZE                SZ_128K
  46
  47 /* Physical Memory Map */
  48 #define CONFIG_NR_DRAM_BANKS            1
  49 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  50 #define PHYS_SDRAM_SIZE                 SZ_512M
  51
  52 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  53 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  54 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  55
  56 #define CONFIG_SYS_INIT_SP_OFFSET \
  57         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  58 #define CONFIG_SYS_INIT_SP_ADDR \
  59         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  60
  61 #define CONFIG_ENV_OFFSET               (6 * SZ_64K)
  62 #define CONFIG_ENV_SIZE                 SZ_8K
  63 #define CONFIG_ENV_IS_IN_MMC
  64 #define CONFIG_SYS_MMC_ENV_DEV          0
  65
  66 /* VDD voltage 1.65 - 1.95 */
  67 #define CONFIG_SYS_SD_VOLTAGE           0x00000080
  68
  69 /* USB Configs */
  70 #define CONFIG_CMD_USB
  71 #ifdef CONFIG_CMD_USB
  72 #define CONFIG_USB_EHCI
  73 #define CONFIG_USB_EHCI_MX6
  74 #define CONFIG_USB_STORAGE
  75 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  76 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  77 #define CONFIG_MXC_USB_FLAGS            0
  78 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG2 port enabled */
  79 #endif
  80
  81 #define CONFIG_CI_UDC
  82 #define CONFIG_USBD_HS
  83 #define CONFIG_USB_GADGET_DUALSPEED
  84
  85 #define CONFIG_USB_GADGET
  86 #define CONFIG_CMD_USB_MASS_STORAGE
  87 #define CONFIG_USB_GADGET_MASS_STORAGE
  88 #define CONFIG_USBDOWNLOAD_GADGET
  89 #define CONFIG_USB_GADGET_VBUS_DRAW     2
  90
  91 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
  92 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
  93 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
  94
  95 #define CONFIG_CMD_DFU
  96 #define CONFIG_DFU_FUNCTION
  97 #define CONFIG_DFU_MMC
  98 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
  99 #define DFU_DEFAULT_POLL_TIMEOUT 300
 100
 101 /* Fuses */
 102 #define CONFIG_CMD_FUSE
 103 #define CONFIG_MXC_OCOTP
 104
 105 #define CONFIG_EXTRA_ENV_SETTINGS \
 106         "script=boot.scr\0" \
 107         "image=zImage\0" \
 108         "console=ttymxc0\0" \
 109         "fdt_high=0xffffffff\0" \
 110         "initrd_high=0xffffffff\0" \
 111         "fdt_file=imx6sl-warp.dtb\0" \
 112         "fdt_addr=0x88000000\0" \
 113         "initrd_addr=0x83800000\0" \
 114         "boot_fdt=try\0" \
 115         "ip_dyn=yes\0" \
 116         "mmcdev=0\0" \
 117         "mmcpart=1\0" \
 118         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 119         "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
 120         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 121                 "root=${mmcroot}\0" \
 122         "loadbootscript=" \
 123                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 124         "bootscript=echo Running bootscript from mmc ...; " \
 125                 "source\0" \
 126         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 127         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 128         "mmcboot=echo Booting from mmc ...; " \
 129                 "run mmcargs; " \
 130                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 131                         "if run loadfdt; then " \
 132                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 133                         "else " \
 134                                 "if test ${boot_fdt} = try; then " \
 135                                         "bootz; " \
 136                                 "else " \
 137                                         "echo WARN: Cannot load the DT; " \
 138                                 "fi; " \
 139                         "fi; " \
 140                 "else " \
 141                         "bootz; " \
 142                 "fi;\0" \
 143         "netargs=setenv bootargs console=${console},${baudrate} " \
 144                 "root=/dev/nfs " \
 145         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 146                 "netboot=echo Booting from net ...; " \
 147                 "run netargs; " \
 148                 "if test ${ip_dyn} = yes; then " \
 149                         "setenv get_cmd dhcp; " \
 150                 "else " \
 151                         "setenv get_cmd tftp; " \
 152                 "fi; " \
 153                 "${get_cmd} ${image}; " \
 154                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 155                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 156                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 157                         "else " \
 158                                 "if test ${boot_fdt} = try; then " \
 159                                         "bootz; " \
 160                                 "else " \
 161                                         "echo WARN: Cannot load the DT; " \
 162                                 "fi; " \
 163                         "fi; " \
 164                 "else " \
 165                         "bootz; " \
 166                 "fi;\0"
 167
 168 #define CONFIG_BOOTCOMMAND \
 169            "mmc dev ${mmcdev};" \
 170            "mmc dev ${mmcdev}; if mmc rescan; then " \
 171                    "if run loadbootscript; then " \
 172                            "run bootscript; " \
 173                    "else " \
 174                            "if run loadimage; then " \
 175                                    "run mmcboot; " \
 176                            "else run netboot; " \
 177                            "fi; " \
 178                    "fi; " \
 179            "else run netboot; fi"
 180
 181 #endif                          /* __CONFIG_H */