+commit c3147c1762f8caf99649051116a2411bdf887c10
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:31:36 2009 +0200
+
+ Revert "SMC911x driver fixed for NFS boot"
+
+ This reverts commit ca9c8a1e10fac01e6a1129f82a7ce18bd818fa43,
+ which causes compile warnings ("large integer implicitly truncated
+ to unsigned type") on all systems that use this driver. The warning
+ results from passing long constants (TX_CFG, RX_CFG) into
+ smc911x_set_mac_csr() which is declared to accept "unsigned
+ character" arguments only.
+
+ Being close to a release, with nobody available to actually test the
+ code or the suggested fixes, it seems better to revert the patch.
+
+commit e7563aff174f77aa61dab1ef5d9b47bebaa43702
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 11 23:42:35 2009 -0500
+
+ fsl-ddr: Fix handling of >4G of memory when !CONFIG_PHYS_64BIT
+
+ The ddr code computes most things as 64-bit quantities and had some places
+ in the middle that it was using phy_addr_t and phys_size_t.
+
+ Instead we use unsigned long long through out and only at the last stage of
+ setting the LAWs and reporting the amount of memory to the board code do we
+ truncate down to what we can cover via phys_size_t.
+
+ This has the added benefit that the DDR controller itself is always setup
+ the same way regardless of how much memory we have. Its only the LAW
+ setup that limits what is visible to the system.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d4b130dc80761b430dc5b410159cd158fca1a348
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 11 23:40:34 2009 -0500
+
+ 85xx: Use print_size to report amount of memory not mapped by TLBs
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6e2aebc33fa740c068fe28d40eaf0319b7c7287e
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:42 2009 -0400
+
+ 85xx: Add README for MPC8569MDS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b2aab386e957ba684d4f2a466bfaa91770e5058a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:33 2009 -0400
+
+ 85xx: Add UART1 support for MPC8569MDS
+
+ MPC8569 UART1 signals are muxed with PortF bit[9-12], we need to define
+ those pins before using UART1.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 399b53cbab0b377ac4c5c16c19c6e41b68a9c719
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:32 2009 -0400
+
+ 85xx: Add PIB support at CS4/CS5 for MPC8569MDS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Yu Liu <Yu.Liu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fb27949059f1bc84381a6216a819090f0cdbaa70
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Jun 4 16:12:39 2009 -0400
+
+ 85xx: Fix some settings for MPC8569MDS board
+
+ - Increase the size of malloc to 512KB because MPC8569MDS needs more memory for
+ malloc to support up to eight Ethernet interfaces.
+ - Move Environment address out of uboot thus the saved environment variables
+ will not be erased after u-boot is re-programmed.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c7f60fd29f2d638d080cdf1a49ad985b85f9429d
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:30 2009 -0400
+
+ 85xx: Fix MURAM size for MPC8569
+
+ MPC8569 has 128K bytes MURAM.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a53c997dd7fc858f2a27f5a47b200567b9343ae5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 22 20:23:51 2009 +0200
+
+ at91/cpu.c: add missing Copyright & GPL header
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit aa446a591aca46ef2b53cc6598ea8091feb45444
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sun Jun 7 21:45:16 2009 +0900
+
+ apollon: Fix a OBJCFLAGS typo
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit 580611cb0932143fc2d7a735cfa9ce1ef34d6002
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jun 10 00:19:28 2009 +0200
+
+ Prepare 2009.06-rc3
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 3a76ab5c166d5956885f803ce975e7151cc0ca0e
Author: Wolfgang Denk <wd@denx.de>
Date: Wed Jun 10 00:15:11 2009 +0200
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+commit 3c9b1ee17e19bd6d80344678d41a85e52b0be713
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Jun 5 14:11:33 2009 -0500
+
+ mpc83xx: don't set SICRH_TSOBI1 to RMII/RTBI operation
+
+ In GMII mode (which operates at 3.3V) both SICRH TSEC1/2 output buffer
+ impedance bits should be clear, i.e., SICRH[TSIOB1] = 0 and SICRH[TSIOB2] = 0.
+ SICRH[TSIOB1] was erroneously being set high.
+
+ U-Boot always operated this PHY interface in GMII mode. It is assumed this
+ was missed in the clean up by the original board porters, and copied along
+ to the TQM and sbc boards.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Acked-by: Ira Snyder <iws@ovro.caltech.edu>
+ Reviewed-by: David Hawkins <dwh@ovro.caltech.edu>
+ Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ CC: Dave Liu <DaveLiu@freescale.com>
+
commit 2c0234fa79122a5aa77c4e17c33eb2fe184b61a7
Author: Daniel Mack <daniel@caiaq.de>
Date: Wed Apr 8 13:23:37 2009 +0200
projects / karo-tx-uboot.git / blobdiff