Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.

[karo-tx-uboot.git] / CHANGELOG

diff --git a/CHANGELOG b/CHANGELOG
index 95ca866f192a02b823cb4bc765e6d571dbdfa856..5a3e8f17f84479303ebc7f9b61743ae78d92f3a5 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,103 @@
 Changes for U-Boot 1.1.4:
 ======================================================================
 
+* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
+  The COPYING file was extended to make clear that these files can be
+  used in non-GPL code, too.
+
+* Add support for Prodrive P3P440 board:
+  - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
+  - CFG_FLASH_QUIET_TEST added to use the common CFI driver
+    for bank autodetection
+  Patch by Stefan Roese, 22 Nov 2005
+
+* Change all '$(...)' variable references into '${...}'
+  which makes the environment compatible with the hush shell.
+  WARNING: Support for the old '$(...)' syntax will be
+  discontinued in a later version.
+
+* Minor changes to init flags in TQM834x PCI.
+
+* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
+  Patch by Stefan Roese, 15 Nov 2005
+
+* New PPC 405EP board added: CMS700
+  Added CONFIG_NET_MULTI for VOM405 board.
+  Added reset_phy() for VOM405 board.
+  Patch by Matthias Fuchs, 09 Nov 2005
+
+* Updated PCI mapping for esd CPCI2DP board.
+  Add support for error LED.
+  Patch by Matthias Fuchs, 07 Nov 2005
+
+* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
+  Patch by Stefan Roese, 07 Nov 2005
+
+* Correct PPC Timebase register definitions (SPRN_TBRL...)
+  Patch by Stefan Roese, 07 Nov 2005
+
+* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
+  Patch by Stefan Roese, 05 Nov 2005
+
+* Additional fix for external IRQ config on Yellowstone & Yosemite
+  Patch by Stefan Roese, 03 Nov 2005
+
+* Add support for Ocotea pass 3 with 440GX Rev. F
+  Patch by Stefan Roese, 01 Nov 2005
+
+* Fix external IRQ configuration on Yellowstone & Yosemite
+  Patch by Stefan Roese, 28 Oct 2005
+
+* Add support for multiple PHYs.
+  Tested on the following boards:
+       cmcpu2      (at91rm9200/ether.c)
+       PPChameleon (ppc4xx/4xx_enet.c)
+       yukon       (mpc8220/fec.c)
+       uc100       (mpc8xx/fec.c)
+       tqm834x     (mpc834x/tsec.c) with EEPRO100
+       lite5200    (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
+  Main changes include:
+  common/miiphyutil.c
+  - miiphy_register routine was added to allow multiple PHYs to be registered
+  - miiphy_read and miiphy_write are now defined in this file, and
+    require additional argument (char *devname)
+  - other miiphy_* routines also require additional device name argument
+  ../lib_i386/board.c
+  ../lib_ppc/board.c
+  Calling reset_phy() was moved to be executed *after* eth_initialize().
+  This is necessary as now some of the implementations of reset_phy()
+  may need to use miiphy_reset() which is not allowed before eth_initialize()
+  as eth_initialize registers all required miiphy_* routines.
+  Tested on IP860 and PHY initializes properly after this change.
+
+* Correct includes for flat tree builder.
+
+* Fix conflicting types (flash_write()) in trab auto_update.c.
+
+* Add PCI support for the TQM834x board.
+
+* Add missing 4xx board to MAKEALL
+  Patch by Stefan Roese, 20 Oct 2005
+
+* Fix conflicting types (flash_write()) in esd auto_update.c
+  Patch by Stefan Roese, 20 Oct 2005
+
+* Fix problem with sleep in NetConsole (use get_timer())
+  Patch by Stefan Roese, 20 Oct 2005
+
+* Add NetConsole Support for AMCC eval boards
+  Patch by Stefan Roese, 20 Oct 2005
+
+* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
+  Patch by Stefan Roese, 18 Oct 2005
+
+* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
+  Fix identation on ext2ls help entry.
+  Patch by Stefan Roese, 14 Oct 2005
+
+* Add support for TQM834x boards.
+  Cleanup.
+
 * Cleanup for GCC-4.x
 
 * Add documentation for Open Firmware Flat Tree and usage.