+commit 632a6dd0b612eb7b143f789f2a0273917468c041
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Mon Aug 31 16:18:24 2009 +0200
+
+ Add common code dir for Matrix Vision boards.
+
+ This fixes current build failure.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+ mvblm7.c: fix warning: implicit declaration of function
+ 'mv_reset_environment'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 52f6c34c85d6c16f2a41433b5000490ecf374992
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Sun Aug 30 11:05:29 2009 -0700
+
+ bugfix CONFIG_SYS_CONSOLE_INFO_QUIET
+
+ The "console: unify printing current devices" patch goofed:
+ CONFIG_SYS_CONSOLE_INFO_QUIET is supposed to *REMOVE* boot
+ time noise, not add it. Said patch changed the #ifndefs
+ to #ifdef; this one restores them to the proper sense.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 28887d831b02c66ccc10d7f1379204b5a62f4543
+Author: André Schwarz <andre.schwarz@matrix-vision.de>
+Date: Thu Aug 27 14:48:35 2009 +0200
+
+ Use common code for Matrix Vision boards
+
+ Clean up existing boards (mvBC-P/MPC5200 and mvBL-M7/MPC8343) by
+ using common code.
+
+ Signed-off-by: André Schwarz <andre.schwarz@matrix-vision.de>
+
+commit 05f91a65abc3180e2896cd8ddee7a34b1d1ce6e0
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 26 21:27:37 2009 -0500
+
+ mpc83xx: mpc8349itx - accommodate larger kernel sizes & unzero the bootdelay
+
+ apparently the ITX was missed last round.
+
+ Also make bootdelay consistent with other boards, so as to give on the
+ opportunity to fix mistakenly set bootcmd without having checked for an
+ bootdelay zero setting first.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit cc861f7127f200e704baaf061a7f508e3c93f2a3
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 26 21:25:46 2009 -0500
+
+ mpc83xx: match dtb filename references to their dts equivalents in the linux kernel
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 68e74567cf317318df52dbcb2ac170ffc5e7758a
+Author: Feng Kan <fkan@amcc.com>
+Date: Fri Aug 21 10:59:42 2009 -0700
+
+ ppc4xx: Fix ECC Correction bug with SMC ordering for NDFC driver
+
+ Fix ECC Correction bug where the byte offset location were double
+ flipped causing correction routine to toggle the wrong byte location
+ in the ECC segment. The ndfc_calculate_ecc routine change the order
+ of getting the ECC code.
+ /* The NDFC uses Smart Media (SMC) bytes order */
+ ecc_code[0] = p[2];
+ ecc_code[1] = p[1];
+ ecc_code[2] = p[3];
+ But in the Correction algorithm when calculating the byte offset
+ location, the s1 is used as the upper part of the address. Which
+ again reverse the order making the final byte offset address
+ location incorrect.
+ byteoffs = (s1 << 0) & 0x80;
+ .
+ .
+ byteoffs |= (s0 >> 4) & 0x08;
+ The order is change to read it in straight and let the correction
+ function to revert it to SMC order.
+
+ Signed-off-by: Feng Kan <fkan@amcc.com>
+ Acked-by: Victor Gallardo <vgallardo@amcc.com>
+ Acked-by: Prodyut Hazarika <phazarika@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 30fc5cd3116cb112d0aab7e6d7c8eef1b67ed075
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 25 12:22:38 2009 +0200
+
+ include/s3c24x0.h: fix S3C24X0_SPI_CHANNEL declaration
+
+ The SPI controller on the S3C24X0 has 8 bit registers, not 32 bit.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e637385e69f63bc73b9dfd2ddd8d0f383790ca28
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 20 19:17:59 2009 -0400
+
+ Blackfin: fix typos in gpio comments
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c2fbcb6ae86c10621a386c13be57eaa766221ed5
+Author: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
+Date: Tue Aug 18 04:49:57 2009 -0400
+
+ Blackfin: cm-bf527/cm-bf537: increase flash sectors
+
+ Newer revisions of these boards have slightly larger flashes, so increase
+ the configured number of sectors so that U-Boot works on all revisions.
+
+ Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a794f59a75bf9fd4a44f1ad2349cae903c42b89c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 23 14:14:52 2009 +0200
+
+ sh/rsk7203: add missing include net.h
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6ac9f47977a9fc1876979871eeb14f26ba1bdbe6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Aug 23 02:47:59 2009 -0400
+
+ start a linker script helper file
+
+ Start a common header file for common linker script code (such as
+ workarounds for older linkers) rather than doing this in the build system.
+
+ As fallout, we no longer execute the linker every time config.mk is
+ included by a build file (which can easily be 70+ times), but rather only
+ execute it once.
+
+ This also fixes a bug in the major version checking by creating a macro to
+ easily compare versions and keep people from making the same common
+ mistake (forgetting to check major and minor together).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2ed0869d30602eb660569eababb8fedff36bd23a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Aug 22 19:50:22 2009 -0400
+
+ Blackfin: use common code to preprocess linker script
+
+ Now that the common code preprocesses the linker script, the Blackfin code
+ no longer needs to do it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4d3758c835c7e96da2a291e7fb5acfc19bc06e8e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Aug 22 19:48:56 2009 -0400
+
+ .gitignore: ignore generated u-boot.lds
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 79b91de958511840d2a7491be92d435b7ef43f17
+Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Sat Aug 22 14:21:53 2009 +0200
+
+ include/mmc.h: Fix typo in IS_SD() macro
+
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+
+commit 963f2f611741f8d9c38bd7caf20ae8c95cab7b3f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Aug 22 23:27:26 2009 +0200
+
+ Prepare 2009.08-rc3
+
+ Update CHANGELOG, minor Coding Style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5b2da6a309266f21cbb68f06fcfdf9ba141022e7
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Aug 21 06:52:25 2009 +1000
+
+ qemu-mips: Fix Qemu website
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Signed-off-by: Michal Simek <michal.simek@petalogix.com>
+ Acked-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit 79f516bccc3cff5a5cd4b3dffb7d254e746fdbde
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 21 16:34:38 2009 -0500
+
+ mpc83xx: accommodate larger kernel sizes by default
+
+ linux mpc83xx_defconfig kernels are getting bigger, accommodate for
+ their growth by adjusting default load and fdt addresses.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8eceeb7fd656d6d071c0a8b615e178aca5775fff
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 21 16:33:15 2009 -0500
+
+ mpc83xx: mpc8377erdb - change DDR settings to those from latest bsp
+
+ when using Linus' 83xx_defconfig, the mpc8377rdb would hang at boot
+ at either:
+
+ NET: Registered protocol family 16
+
+ or the
+
+ io scheduler cfq registered
+
+ message. Fixing up these DDR settings appears to fix the problem.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 27c5248dd4c9ba4a36899689595956c5e59e349a
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 21 16:31:20 2009 -0500
+
+ mpc83xx: tqm8349 - remove pci & flash window conflict
+
+ commit 9993e196da707a0a1cd4584f1fcef12382c1c144 "mpc83xx: convert all
+ remaining boards over to 83XX_GENERIC_PCI" remapped pci windows on
+ tqm834x to make it more consistent with the other 83xx boards. During
+ that time however, the author failed to realize that FLASH_BASE was
+ occupying the same range as what PCI1_MEM_BASE was being assigned.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Tested-by: Wolfgang Denk <wd@denx.de>
+
+commit 6d2c26ac831f033b0025cfb256365a047f8dd115
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Aug 21 16:30:30 2009 -0500
+
+ mpc83xx: add missing CSCONFIG_ODT_WR_CFG for 832x CPUs
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 193b4cb3f641ed0fd9bb79b8fa4671882c50ffdb
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Aug 21 16:27:05 2009 -0500
+
+ mpc83xx: mpc8349 - delete unused SYS_MID_FLASH_JUMP
+
+ This was introduced with the MPC8349EMDS board, and then copied to
+ a couple other boards by nature of being the reference implementation.
+
+ u-boot$git grep CONFIG_SYS_MID_FLASH_JUMP
+ include/configs/MPC8349EMDS.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000
+ include/configs/sbc8349.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000
+ include/configs/vme8349.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000
+ u-boot$
+
+ It currently isn't used, so delete it before it spreads further.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c0d660fbbede322648ec79d3e39389e48f5fab24
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Aug 21 16:21:58 2009 -0500
+
+ mpc83xx: sbc8349 - make enabling PCI more user friendly
+
+ Prior to this commit, to enable PCI, you had to go manually
+ edit the board config header, which isn't really user friendly.
+ This adds the typical PCI make targets to the toplevel Makefile
+ in accordance with what is being done with other boards.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a3c5057a6c05b4c7235a270486220e4511366133
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 7 23:37:54 2009 +0200
+
+ eeprom_m95xxx: remove unused variable i
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8cf19b9fec92d8aa22b2fe4b4e6976743b1daa51
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Fri Jul 17 15:02:42 2009 +0400
+
+ jffs2: some fixes to summary support
+
+ This patch fixes some issues with JFFS2 summary support in U-Boot.
+ 1/ Summary support made compilation configurable (as summary support
+ considered expiremental even in Linux).
+ 2/ Summary code can do unaligned 16-bit and 32-bit memory accesses.
+ We need to get data byte by byte to exclude data aborts.
+ 3/ Make summary scan in two passes so we can safely fall back to full
+ scan if we found unsupported entry in the summary.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 11906936e168d12d684bb3d2930a62693ba3d84e
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Aug 10 18:55:54 2009 +0530
+
+ arm: rd6281a: Fixed NAND specific warning
+
+ It is recommended to define the macro CONFIG_SYS_64BIT_VSPRINTF
+ for NAND specific warning removal, same is done in this patch
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit b5ffb193330113d2e00489d96bf8ec1f541ed4e1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 13 00:37:16 2009 +0200
+
+ TRAB: make independent of specific libgcc helper routines
+
+ The TRAB board references local libgcc helper routines
+ (lib_arm/div0.o and lib_arm/_umodsi3.o) which cause build problems
+ when we try to use the normal, compiler provided libgcc instead.
+ Removing these references allows to build both with and without the
+ local libgcc helper routines.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1aada9cd643567d351667138851e9231ccfa245a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 17 14:00:53 2009 +0200
+
+ Fix all linker scripts for older binutils versions (pre-2.16)
+
+ Commit f62fb99941c6 fixed handling of all rodata sections by using a
+ wildcard combined with calls to ld's builtin functions SORT_BY_ALIGNMENT()
+ and SORT_BY_NAME(). Unfortunately these functions were only
+ introduced with biunutils version 2.16, so the modification broke
+ building with all tool chains using older binutils.
+
+ This patch makes it work again. This is done by omitting the use of
+ these functions for such old tool chains. This will result in
+ slightly larger target binaries, as the rodata sections are no longer
+ in optimal order alignment-wise which reauls in unused gaps, but the
+ effect was found to be insignificant - especially compared to the fact
+ that you cannot build U-Boot at all in the current state.
+
+ As ld seems to have no support for conditionals we run the linker
+ script through the C preprocessor which can be easily used to remove
+ the unwanted function calls.
+
+ Note that the C preprocessor must be run with the "-ansi" (or a
+ "-std=") option to make sure all the system-specific predefined
+ macros outside the reserved namespace are suppressed. Otherise, cpp
+ might for example substitute "powerpc" to "1", thus corrupting for
+ example "OUTPUT_ARCH(powerpc)" etc.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Mike Frysinger <vapier@gentoo.org>
+
+commit f772acf8a584067033eff1e231fcd1fb3a00d3d9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 17 13:17:29 2009 +0200
+
+ ARM: compiler options cleanup - improve tool chain support
+
+ For some time there have been repeated reports about build problems
+ with some ARM (cross) tool chains. Especially issues about
+ (in)compatibility with the tool chain provided runtime support
+ library libgcc.a caused to add and support a private implementation
+ of such runtime support code in U-Boot. A closer look at the code
+ indicated that some of these issues are actually home-made. This
+ patch attempts to clean up some of the most obvious problems and make
+ building of U-Boot with different tool chains easier:
+
+ - Even though all ARM systems basicy used the same compiler options
+ to select a specific ABI from the tool chain, the code for this was
+ distributed over all cpu/*/config.mk files. We move this one level
+ up into lib_arm/config.mk instead.
+
+ - So far, we only checked if "-mapcs-32" was supported by the tool
+ chain; if yes, this was used, if not, "-mabi=apcs-gnu" was
+ selected, no matter if the tool chain actually understood this
+ option. There was no support for EABI conformant tool chains.
+ This patch implements the following logic:
+
+ 1) If the tool chain supports
+ "-mabi=aapcs-linux -mno-thumb-interwork"
+ we use these options (EABI conformant tool chain).
+ 2) Otherwise, we check first if
+ "-mapcs-32"
+ is supported, and then check for
+ "-mabi=apcs-gnu"
+ If one test succeeds, we use the first found option.
+ 3) In case 2), we also test if "-mno-thumb-interwork", and use
+ this if the test succeeds. [For "-mabi=aapcs-linux" we set
+ "-mno-thumb-interwork" mandatorily.]
+
+ This way we use a similar logic for the compile options as the
+ Linux kernel does.
+
+ - Some EABI conformant tool chains cause external references to
+ utility functions like raise(); such functions are provided in the
+ new file lib_arm/eabi_compat.c
+
+ Note that lib_arm/config.mk gets parsed several times, so we must
+ make sure to add eabi_compat.o only once to the linker list.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Dirk Behme <dirk.behme@googlemail.com>
+ Cc: Magnus Lilja <lilja.magnus@gmail.com>
+ Cc: Tom Rix <Tom.Rix@windriver.com>
+ Cc: Prafulla Wadaskar <prafulla@marvell.com>
+ Acked-by: Sergey Kubushyn <ksi@koi8.net>
+ Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
+ Tested-by: Andrzej Wolski <awolski@poczta.fm>
+ Tested-by: Gaye Abdoulaye Walsimou <walsimou@walsimou.com>
+ Tested-by: Tom Rix <Tom.Rix@windriver.com>
+ Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 269610f6ba2e4a7bc27d2e53d43160614016964f
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Thu Jul 30 17:56:51 2009 +0800
+
+ NAND boot: fix nand_load overlap issue
+
+ The code copy data from NAND flash block by block, so when
+ the data length isn't a whole-number multiple of the block
+ size, it will overlap the rest space.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 1fc1d9aed08f2b3366d634fda6712a710b2cff9a
+Author: Giulio Benetti <giulio.benetti@micronovasrl.com>
+Date: Fri Jul 31 17:30:34 2009 -0500
+
+ add WATCHDOG_RESET() on nand write and read
+
+ Signed-off-by: giulio.benetti@micronovasrl.com
+ Acked-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit b1e849f2201bbbf3ca81fde164f154f9caf7f0e9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Feb 4 15:14:05 2009 -0600
+
+ tsec: Wait for auto-negotiation to complete without link
+
+ Previously, waiting for auto-negotiation would only occur if a valid
+ link had been detected. Problems arose when attempting to use a
+ tsec immediately after bootup but before link was achieved, eg:
+ => dhcp
+ Auto-neg error, defaulting to 10BT/HD
+ eTSEC1: No link.
+ Auto-neg error, defaulting to 10BT/HD
+ eTSEC2: No link.
+ =>
+
+ With this patch applied the same operation as above resulted in:
+ => dhcp
+ Waiting for PHY auto negotiation to complete. done
+ Enet starting in 1000BT/FD
+ Speed: 1000, full duplex
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 477fa6378fbd3e47a5e2e83d0dd3970d5b1c8371
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Thu Aug 20 10:14:11 2009 +0200
+
+ arm: kirkwood: See to it that sent data is 8-byte aligned
+
+ U-boot might use non-8-byte-aligned addresses for sending data, which
+ the kwgbe_send doesn't accept (bootp does this for me). This patch
+ copies the data to be sent to a malloced temporary buffer if it is
+ non-aligned.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit cad713bf7548b9e90433dac8270165402a6c9cc3
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Thu Aug 20 10:13:06 2009 +0200
+
+ Wait for the link to come up on kirkwood network init
+
+ This patch makes the device wait for up to 5 seconds for the link to
+ come up, similar to what many of the other network drivers do. This
+ avoids confusing situations where, e.g., a tftp fails when initiated
+ early after U-boot has started (before the link has come up).
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit bb1ca3b27f7fba8c73cb10279a6a8b8b69a308ff
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Thu Aug 20 10:12:28 2009 +0200
+
+ arm:kirkwood Define kirkwood phy address magic number
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f81ecb5d3300bf92d17302d3712f30585c182da9
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Aug 17 15:55:38 2009 -0500
+
+ e1000: fix PCI memory addressing
+
+ The Intel E1000 driver was making assumptions about the relationship between
+ some virtual, physical, and PCI addresses.
+
+ Also fix some bad usage of the DEBUGOUT macro
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b644006e1a7baa227aedc606ecdf0bb5eeb24cab
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Wed Aug 12 16:42:48 2009 +0400
+
+ jffs2: clean the cache in case of malloc fails in build_lists
+
+ We should call jffs2_clean_cache() if we return from jffs2_build_lists()
+ with an error to prevent usage of incomplete lists. Also we should
+ free() a local buffer to prevent memory leaks.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 7ff66bb0be80cadd681be22a72e5eb02ee14c878
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Aug 12 10:17:03 2009 +0200
+
+ ppc: trigger WDT before starting Linux
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 918319c705d8a3d6251919a660baef32ff3a829a
+Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Wed Jul 22 18:30:03 2009 +0200
+
+ Update the mtd driver name in bootargs for at91-based boards
+
+ The name of the atmel nand driver in the kernel changed from at91_nand
+ to atmel_nand back in June 2008, but the at91-based boards config files
+ still refer to at91_nand. This patch updates them with the new name
+
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+
+commit 8fa656aa5289815d942ebdc26182ccb9f2b9c86f
+Author: Ben Goska <goskab@onid.oregonstate.edu>
+Date: Fri Aug 14 10:03:36 2009 -0700
+
+ omap3: Fixed a problem with hwecc
+
+ In commit 187af954cf7958c24efcf0fd62289bbdb4f1f24e there
+ was a typo that offset all the ecc registers by 4 bytes, fixed that.
+
+ Signed-off-by: Ben Goska <goskab@onid.oregonstate.edu>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 514bab6609acd1a2a19fdd75c2f6255178db7c96
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Aug 17 16:57:53 2009 +0200
+
+ ppc4xx: Fix "chip_config" command for AMCC Arches
+
+ This patch fixes the "chip_config" command for I2C bootstrap EEPROM
+ configuration. First it changes the I2C bootstrap EEPROM address to
+ 0x54 as this is used on Arches (instead of 0x52 on Canyonlands/
+ Glacier). Additionally, the NAND bootstrap settings are removed
+ for Arches since Arches doesn't support NAND-booting.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4af34177b657e91263919a307fd0b0865a299e52
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 16 23:40:13 2009 +0200
+
+ Monahans: avoid floating point calculations
+
+ Current code for the Monahans CPU defined OSCR_CLK_FREQ as 3.250 (MHz)
+ which caused floating point operations to be used. This resulted in
+ unresolved references to some FP related libgcc functions when using
+ U-Boot's private libgcc functions.
+
+ Change the code to use fixed point math only.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e393e2e9bc5cd3d5484e193d1380e7cd7587ab5c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 14 16:43:22 2009 -0500
+
+ 85xx: Fix addrmap to include memory
+
+ When we init the addrmap based on the TLB we will not end up getting
+ the TLB that covers memory if we are using SPD. The reason is we
+ haven't relocated at the point that we setup the memory TLB and thus it
+ will not get setup in the addrmap.
+
+ Instead we can just walk over the TLB array after we've relocated and
+ see all the TLBs that have been set and use that information to populate
+ the initial addrmap. By doing this we insure that we get the TLB
+ entries that cover memory.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7dedefdf749ff02c1086f7ddb8cb83a77b00d030
+Author: John Schmoller <jschmoller@xes-inc.com>
+Date: Wed Aug 12 10:55:47 2009 -0500
+
+ flash: Fix CFI buffer size bug
+
+ Fix bug introduced by 9c048b523413ae5f3ff34e00cf57569c3368ab51.
+
+ The cfi_flash.c driver cast the flash buffer size to a uchar in
+ flash_write_cfibuffer(). On some flash parts, (tested on Numonyx
+ part PC32F512M29EWH), the buffer size is 1KB. Remove the cast to
+ uchar to enable buffer sizes to be larger.
+
+ Signed-off-by: John Schmoller <jschmoller@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f6e3a1fa92f61083885178101e973c86b419a6f7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 13 00:32:14 2009 -0400
+
+ trab: rename spi_init()
+
+ The local board-specific spi_init() function conflicts with the common SPI
+ layer, so rename it to something board-specific.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 253cb831f5861358a7fa673305cdf7ded1096f44
+Author: Giuseppe CONDORELLI <giuseppe.condorelli@st.com>
+Date: Wed Jul 29 06:05:20 2009 -0400
+
+ zlib: add watchdog reset call
+
+ This patch adds watchdog reset call to allow its invokation during decompression
+ phase. This control was present on old zlib version and here it is
+ backported for those relevant routines. This patch is sent as a zlib separate
+ one beacuse it was not tested due to specific board lack.
+ zlib patches will be unified just in one when this will be validated through
+ tests.
+
+ Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
+
+commit dce3d797102b6618e8bdd4a09cfd35969f165d86
+Author: Giuseppe CONDORELLI <giuseppe.condorelli@st.com>
+Date: Wed Jul 29 08:05:08 2009 -0400
+
+ zlib: updated to v.1.2.3
+
+ This patch updates zlib to the latest stable version.
+ Only relevant zlib parts were ported to u-boot tree, as already did for the
+ current zlib (0.95). New zlib guarantees a faster inflate performances
+ other then others improvements as explained at www.zlib.net.
+ It also includes Alessandro Rubini's patches to allow 0 as destination pointer
+ and to call watchdog reset if required by architecture.
+
+ Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
+ Reviewed-by: Angelo Castello <angelo.castello@st.com>
+ Reviewed-by: Alessandro Rubini <rubini-list@gnudd.com>
+
+commit 3426d65daab6af483b177ed502038f52ed2e5aef
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Aug 11 10:37:58 2009 +0200
+
+ dtt, lm81: move unneccessary printf into a debug printf
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 54e399f110bbaa24e662e6dd9e88ddb86989d668
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Tue Aug 11 11:33:47 2009 +0100
+
+ MIMC200: reduce LCD pixclock
+
+ The initial pixclock for the MIMC200 board is wrong (and causes
+ screen corruption due to DMA underruns).
+
+ This patch simply reduces the pixel clock to fix the problem.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 1443cd7e54d6893ab7cc51d93fe7759cdaa8b31f
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Wed Jul 1 14:04:05 2009 -0400
+
+ UEC FIXED PHY: Determine fixed-phy port using UEC interface name.
+
+ Fixed a misunderstanding in the original implementation, 'devnum' that
+ was used in the cpu/ppc4xx/4xx_enet.c implementation was NOT the
+ PHY's SMI address, rather it was the number of the MAC interface on
+ the CPU. The equivalent of this for uec_phy will be the UEC number
+ stored in mii_info->dev->name. Usage example is updated for uec.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1a9519373b977ef3f7c9563ad3acb6c6f2424657
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Wed Jul 1 14:03:15 2009 -0400
+
+ Assigned a static SMI address to all UECs TBIPA address.
+
+ It is set to 0x1F by default and can be overwritten on the board
+ header file by defining CONFIG_UTBIPAR_INIT_TBIPA. This allows
+ the CPU to simply "reserve" one SMI address instead of using
+ a different one for each UEC.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9fd38a01cbc0ce4a8db41f72677103ed04b23db5
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Aug 10 19:43:06 2009 +0530
+
+ net: kirkwood: updates: used eth_setenv_enetaddr api
+
+ eth_setenv_enetaddr is avaible by upper layer
+ using this saves 204 bytes on total image size
+
+ used Local OUI instead of Marvell OUI for
+ random MAC address generation logic
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ecbd2078a1f56c85b6c56afaaed862bf92ccd3f3
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Tue Aug 11 03:48:05 2009 +0800
+
+ Fix E1000 build warning on AP1000 board
+
+ Fix E1000 build warning on AP1000 board
+ Fix the build warning on AP1000 board:
+ e1000.c:131: warning: 'e1000_read_eeprom' used but never defined
+ e1000.c:2012: warning: 'e1000_set_phy_mode' defined but not used
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b3af1d698b031e721bacaee8715d79daaf823de6
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Mon Aug 10 12:24:40 2009 -0400
+
+ ARM: Davinci DM355: Enabling DM9000 on DM355 EVM
+
+ Due to recent changes to the NET support on U-boot, DM9000
+ is no longer detected on the DM355 EVM.
+ This minor update enables DM9000 on the DM355 EVM.
+ Tested on the DM355 EVM
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 08c2df33f1cd5935938486e968696f94ad406313
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Aug 10 19:23:19 2009 +0530
+
+ net: phy: bugfixes: mv88E61xx compiler warnings fixed
+
+ 1. mv88E61xx driver compiler warnings fixed
+ 2. idstr if-else statements changed to switch() construct
+ and added default case too.
+ This fixed idstr may be uninitialized warning
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 750326e5d540885e3ec36bda9464b8269249f6ce
+Author: Po-Yu Chuang <ratbert@faraday-tech.com>
+Date: Mon Aug 10 11:00:00 2009 +0800
+
+ arm: A320: driver for FTMAC100 ethernet controller
+
+ This patch adds an FTMAC100 ethernet driver for Faraday A320 evaluation board.
+
+ Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f90dc43fd67eea71124b999a7d5e617d0d86795b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 10 16:40:55 2009 -0500
+
+ 85xx: Removed BEDBUG support from FSL 85xx boards
+
+ For some reason the MPC8544 enabled BEDBUG if PCI was enabled and that
+ got copied int the MPC8536, MPC8572 and P2020 DS boards. The BEDBUG
+ support has never been made to work completely on e500/85xx so we
+ just disable it to save space and match the other FSL 85xx boards.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit eb1a4d0a471505c169bef19a73a60f8641f0b875
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 10 10:39:12 2009 +0200
+
+ Prepare 2009.08-rc2
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 53cc18c71b2b920cca171874c6663e274fa80556
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 10 10:38:34 2009 +0200
+
+ Minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d371708a1beda0f529756e614af785b30461379e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 10 09:59:10 2009 +0200
+
+ net/tftp.c: fix warning: pointer targets differ in signedness
+
+ tftp.c:294: warning: pointer targets in passing argument 1 of 'strlen'
+ differ in signedness
+
+ This was only visible for the utx8245 board which seems to have DEBUG
+ enabled.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3ed9e943fdfe51174b23989d48563b8c1b7d2ea8
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 16:06:47 2009 +0200
+
+ ARM Cortex A8: Remove bogus config.mk entries
+
+ Remove bogus config.mk entry, fix newline and remove redundant
+ omap3/config.mk
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit cd3dcba1422d3441503251fbc69cf2437c440781
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 12:46:09 2009 +0200
+
+ OMAP3: Fix missing GPMC_CONFIG_CS0_BASE
+
+ Applying two indepenent OMAP3 patches resulted in missing
+ GPMC_CONFIG_CS0_BASE. Patch "omap3: embedd gpmc_cs into gpmc
+ config struct" removes GPMC_CONFIG_CS0_BASE, independent patch
+ "omap3: bug fix for NOR boot support" introduces it's usage.
+ Re-introduce GPMC_CONFIG_CS0_BASE.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit ba3dbaf281130029ecb970a922551902c1d80b50
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Jun 8 04:12:49 2009 +0400
+
+ mxc-mmc: sdhc host driver for MX2 and MX3 proccessor
+
+ This is a port of Linux driver for SDHC host controller hardware
+ found on Freescale's MX2 and MX3 processors. Uses new generic MMC
+ framework (CONFIG_GENERIC_MMC) and it looks like there are some
+ problems with a framework (at least on LE cpus). Some of these
+ problems are addressed in the following patches.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 642d7b63c343633dcafc4e23a20e32604a05ff13
+Author: Alessandro Rubini <rubini-list@gnudd.com>
+Date: Fri Aug 7 12:35:47 2009 +0200
+
+ kirkwood/gpio.h: remove duplicate definition
+
+ Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
+
+commit 3ac374c0f0b7d856f1a43317a286f2079106bd6a
+Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Fri Aug 7 12:37:36 2009 +0200
+
+ Add driver for the ST M95xxx SPI EEPROM
+
+ This chip is used in a number of boards manufactured by Calao-Systems
+ which should be supported soon. This driver provides the necessary
+ spi_read and spi_write functions necessary to communicate with the chip.
+
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+
+commit 30951960bae9a2c33e324a7165962a082e913f9e
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Fri Aug 7 22:27:32 2009 +0530
+
+ arm: Sheevaplug: Fixed NAND specific warning
+
+ It is recommended to define the macro CONFIG_SYS_64BIT_VSPRINTF
+ for NAND specific warning removal, same is done in this patch
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 317734966e763fdee183898c0ed940c9bada2541
+Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+Date: Fri Aug 7 13:53:20 2009 -0400
+
+ Dual-license IBM code contributions
+
+ It was brought to our attention that U-Boot contains code derived from the
+ IBM OpenBIOS source code originally provided with some of the older PowerPC
+ 4xx development boards. As a result, the original license of this code has
+ been carried in the various files for a number of years in the U-Boot project.
+
+ IBM is dual-licensing the IBM code contributions already present in U-Boot
+ under either the terms of the GNU General Public License version 2, or the
+ original code license already present.
+
+ Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+
+commit cfd700be9f5ed289fd57a9bd61e266319badcb0d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 5 09:03:54 2009 -0500
+
+ fdt: Fix fdt_pci_dma_ranges handling of 64-bit ranges
+
+ If the size of a region equal to 4G it can't be represnted in a 32-bit
+ BAR so we should have marked that case as MEM64.
+
+ Additionally bump the number of inbound windows up to 4 to handle the
+ fact that Freescale PPCs that have an implicit window for CCSRBAR.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 59b4d7471c42e955bd9846892a0cc7478171778d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 6 21:29:59 2009 +0200
+
+ ARM EABI: add new helper functions resp. function names
+
+ The ARM EABI defines new names for GCC helper functions,
+ and GCC seems to need some new functions as well.
+
+ This patch is a minimal-invasive approach to fix problems with EABI
+ conformant tool chains (to be used with "USE_PRIVATE_LIBGCC=yes").
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Tested-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 197324d7d998a791e5137b8176981b4af25220ae
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Aug 5 16:18:44 2009 -0500
+
+ hush: Fix bogus free() call
+
+ An off-by-one error in hush.c resulted in an unintentional free() call
+ every time a command was executed
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit ff27650bb255e2275a212357b78c3b77cbf1d2e9
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Aug 5 18:37:45 2009 +0200
+
+ digsy_mtc: Update default environment
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 0b40bd439a33bde9e3cccf1acb5744225d0c6103
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Aug 5 18:37:44 2009 +0200
+
+ digsy_mtc: Add delay in SPI transfers to the companion controller.
+
+ While at it, remove initialization of variables which will be set
+ before usage in all cases.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 0bf00750e082a004e5fb058925622ae72890cc56
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Aug 5 18:37:43 2009 +0200
+
+ digsy_mtc: minor fixes for mtc command help
+
+ Add mtc state subcommand description to the
+ help of mtc command.
+
+ Remove some newlines in description of commands
+ for proper help formating.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 5cc69084189bf49aa99d13d57515be72d1844bdf
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Wed Aug 5 18:37:42 2009 +0200
+
+ digsy_mtc: Add mtc state command.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 716655288a53c95fad203ebf21d0b8ffdc2f7525
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 28 22:35:39 2009 +0200
+
+ Partition support: remove newline from partition name
+
+ Remove bogus newline character that got added to the .name field of
+ the disk_partition_t structure.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3f1649fb0dfb1e5c8890de154c332c394db5cdb5
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Tue Jul 28 09:33:17 2009 +0200
+
+ Fix LZMA string.h header inclusion issue and remove unused variables.
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+
+commit 1c6232f1e2eae87e0e36d489611eb6891dff21e1
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Mon Jul 27 15:28:42 2009 +0200
+
+ bus_vcxk.c: fix warning: unused variable 'lineptr'
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit 18304f7675e84252965b4e24cba279071f1da472
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jul 24 17:51:27 2009 -0400
+
+ env: kill off default_environment_size
+
+ The only environment type that uses this variable is spi flash, and that is
+ only because it is reimplementing the common set_default_env() function.
+ So fix the spi flash code and kill off the default_environment_size in the
+ process.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bedd8403f77f790e9876578885eab1200ba2f8d8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 23 16:37:48 2009 -0400
+
+ export SPI functions to standalone apps
+
+ While we're here, fix the broken #ifdef handling in _exports.h.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3b9043a7c03290c9bdbef03848307263f5f3472c
+Author: Penda Naveen Kumar <pnaveen@ti.com>
+Date: Fri Jul 31 00:06:36 2009 +0530
+
+ omap3: bug fix for NOR boot support
+
+ This patch provides bug fix, when omap3 uses nor boot.
+
+ Signed-off-by: Penda Naveen Kumar<pnaveen@ti.com>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 61c68ae0b43bb5d6ab32958c45289aa197b1a2d1
+Author: Michael Evans <horse_dung@hotmail.com>
+Date: Mon Jul 13 20:13:45 2009 +0100
+
+ Fix examples for OMAP3 boards...
+
+ The attached patch corrects an error in the examples/Makefile which
+ causes the applications in the examples directory to hang on OMAP3
+ based boards. The current Makefile sets -Ttext during linking to
+ 0x0c100000 which is outside of addressable SDRAM memory. The script
+ corrects the existing ifeq...else...endif logic to look at the VENDOR
+ tag rather than the CPU tag.
+
+ The patch affects the following configs: omap3_beagle_config,
+ omap3_overo_config, omap3_evm_config, omap3_pandora_config,
+ omap3_zoom1_config and omap3_zoom2_config.
+
+ Signed-off-by: Michael Evans <horse_dung@hotmail.com>
+
+ Edited commit message.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a3d1421dfd0bb1a729e171f8a093ac837f92cec6
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 09:30:23 2009 +0200
+
+ omap3: use only fixed-size types inside ctrl_structs
+
+ replace variable types in ctrl_structs for omap3 by those with
+ fixed size (u8, u16, u32).
+ Additional ifndef-protection is needed by examples which do not
+ compile when including asm/types.h
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 894113529e3a04871544dde977d6d7adee05d3bf
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 09:30:22 2009 +0200
+
+ omap3: replace all instances of gpmc config struct by one global
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 97a099eaa48d5c762c4f73c52c3090c513b8b877
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 09:30:21 2009 +0200
+
+ omap3: remove typedefs for configuration structs
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit aa0707897c49c330b7d6b8d8362e44f60f224732
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Jul 31 13:34:02 2009 +0800
+
+ Add Intel E1000 PCIE card support
+
+ Based on Intel PRO/1000 Network Driver 7.3.20-k2
+ Add Intel E1000 PCIE card support. The following cards are added:
+ INTEL_82571EB_COPPER
+ INTEL_82571EB_FIBER,
+ INTEL_82571EB_SERDES
+ INTEL_82571EB_QUAD_COPPER
+ INTEL_82571PT_QUAD_COPPER
+ INTEL_82571EB_QUAD_FIBER
+ INTEL_82571EB_QUAD_COPPER_LOWPROFILE
+ INTEL_82571EB_SERDES_DUAL
+ INTEL_82571EB_SERDES_QUAD
+ INTEL_82572EI_COPPER
+ INTEL_82572EI_FIBER
+ INTEL_82572EI_SERDES
+ INTEL_82572EI
+ INTEL_82573E
+ INTEL_82573E_IAMT
+ INTEL_82573L
+ INTEL_82546GB_QUAD_COPPER_KSP3
+ INTEL_80003ES2LAN_COPPER_DPT
+ INTEL_80003ES2LAN_SERDES_DPT
+ INTEL_80003ES2LAN_COPPER_SPT
+ INTEL_80003ES2LAN_SERDES_SPT
+
+ 82571EB_COPPER dual ports,
+ 82572EI single port,
+ 82572EI_COPPER single port PCIE cards
+ and
+ 82545EM_COPPER,
+ 82541GI_LF
+ pci cards are tested on both P2020 board
+ and MPC8544DS board.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 86848a74c3c8eb2f8dd179d039ee604dc45288cf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Jul 15 21:31:28 2009 -0400
+
+ net: sync env ethaddr to device enetaddr in eth_init()
+
+ In the previous enetaddr refactoring, the assumption with commit 56b555a644
+ was that the eth layer would handle the env -> device enetaddr syncing.
+ This was not the case as eth_initialize() is called only once and the sync
+ occurs there. So make sure the eth_init() function does the env -> device
+ sync with every network init.
+
+ Reported-by: Andrzej Wolski <awolski@poczta.fm>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0ebf04c607b54a352629dcf7e76b76f1785dae54
+Author: Robin Getz <rgetz@blackfin.uclinux.org>
+Date: Thu Jul 23 03:01:03 2009 -0400
+
+ minor debug cleanups in ./net
+
+ Minor ./net cleanups - no functional changes
+ - change #ifdef DEBUG printf(); #endif to just debug()
+ - changed __FUNCTION__ to __func__
+ - got rid of extra whitespace between function and opening brace
+ - removed unnecessary braces on if statements
+
+ gcc dead code elimination should make this functionally/size equivalent
+ when DEBUG is not defined. (confirmed on Blackfin, with gcc 4.3.3).
+
+ Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 187af954cf7958c24efcf0fd62289bbdb4f1f24e
+Author: Matthias Ludwig <mludwig@ultratronik.de>
+Date: Tue May 19 09:09:31 2009 +0200
+
+ omap3: embedd gpmc_cs into gpmc config struct
+
+ Embedd chip select configuration into struct for gpmc config
+ instead of having it completely separated as suggested by
+ Wolfgang Denk on
+ http://lists.denx.de/pipermail/u-boot/2009-May/052247.html
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+
+commit 06bffc6ea52d4b390843d295d438b2037d12e5fd
+Author: David Brownell <david-b@pacbell.net>
+Date: Thu Jul 16 18:40:55 2009 -0700
+
+ rm9200 lowevel_init: don't touch reserved/readonly registers
+
+ For some reason the AT91rm9200 lowlevel init writes to a bunch of
+ reserved or read-only addresses. All the boards seem to define the
+ value-to-be-written values as zero ... but they shouldn't actually
+ be writing *anything* there.
+
+ No documented erratum justifies these accesses. It looks like maybe
+ some pre-release BDI-2000 setup code has been carried along by cargo
+ cult programming since at least late 2004 (per GIT history).
+
+ Here's a patch disabling what seems to be bogosity. Tested on a
+ csb337; there were no behavioral changes.
+
+ Signed-off-by: David Brownell <david-b@pacbell.net>
+
+ on RM9200ek
+ Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 301b7db88fbdf7d118efb79b371b2527a2c31868
+Author: David Hunter <hunterd42@gmail.com>
+Date: Thu Jul 30 14:32:49 2009 -0700
+
+ pxa: Fix typo in GCDR(x)
+
+ Fix a typo in the GCDR(x) macro. It's a good thing no one was using it.
+
+ Signed-off-by: David Hunter <hunterd42@gmail.com>
+
+commit 3c448e648221879ae0e030e94508b4f9f63b7ab8
+Author: Eric Benard <eric@eukrea.com>
+Date: Sat Jul 18 23:45:15 2009 +0200
+
+ Add AT91SAM9260 to at91's lowlevel_init.S
+
+ Needed for AT91SAM9260 NOR Boot on Eukrea's CPU9260.
+
+ Signed-off-by: Eric Benard <eric@eukrea.com>
+
+commit 56bdfa961242fc6acaeebc800640a12b28db3899
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Thu Jul 30 09:36:33 2009 +0200
+
+ ppc4xx: Remove check for PPC460EX from CompactCenter
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c3fa4f0c8684c862ecd3fb622fab1e17e44e82e1
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 29 08:46:10 2009 +0200
+
+ ppc4xx: Add support for PPC460EX/460GT rev B chip to AMCC Canyonlands
+
+ This patch is based on a diff created by Phong Vo from AMCC.
+
+ Signed-off-by: Phong Vo <pvo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 89bcc4875007ef6608297dc11e7a0d1fbd9900d2
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 29 08:45:27 2009 +0200
+
+ ppc4xx: Add basic support for AMCC PPC460EX/460GT rev B chips
+
+ This patch is based on a diff created by Phong Vo from AMCC.
+
+ Signed-off-by: Phong Vo <pvo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 82a7edc7ea8f5fe55fed4ff7e127469569e539c4
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 28 15:12:04 2009 +0200
+
+ ppc4xx: Canyonlands-NAND-boot: Support 2 Crucial 512MByte SODIMM's
+
+ Some Canyonlands boards are equipped with different SODIMM's. This is no
+ problem with the "normal" NOR booting Canyonlands U-Boot, since it
+ automatically detects the SODIMM's via SPD data and correctly configures
+ them. But the NAND booting version is different. Here we only have 4k
+ of image size to completely setup the hardware, including DDR2 setup.
+ So we need to use a fixed DDR2 setup here. This doesn't work for different
+ SODIMM's right now.
+
+ Currently only this Crucial SODIMM is support:
+ CT6464AC667.8FB (dual ranked)
+
+ Now some boards are shipped with this SODIMM:
+ CT6464AC667.4FE (single ranked)
+
+ This patch now supports both SODIMM's by configuring first for the dual
+ ranked DIMM. A quick shows, if this module is really installed. If this test
+ fails, the DDR2 controller is re-configured for the single
+ ranked SODIMM.
+
+ Tested with those SODIMM's:
+
+ CT6464AC667.8FB (dual ranked)
+ CT6464AC667.4FE (single ranked)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 27dd5f8e1062684f1ba685760409d9b2ab6691bf
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 28 10:56:03 2009 +0200
+
+ ppc4xx: amcc: Move "kernel_addr_r" etc to higher locations (> 16MB)
+
+ This patch moves the load addresses for kernel, fdt and ramdisk to higher
+ addresses (>= 16MB). This enables booting of bigger kernel images (e.g.
+ lockdep enabled).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6942efc2be1b90054fa4afa5cda7023469fe08b9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 28 10:50:32 2009 +0200
+
+ ppc4xx: amcc: Set CONFIG_SYS_BOOTMAPSZ to 16MB for big kernels
+
+ This patch changes CONFIG_SYS_BOOTMAPSZ from 8MB to 16MB which is the
+ initial TLB on 40x PPC's in the Linux kernel. With this change even bigger
+ Linux kernels (> 8MB) can be booted.
+
+ This patch also sets CONFIG_SYS_BOOTM_LEN to 16MB (default 8MB) to enable
+ decompression of bigger images.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 901be89a27e11b2627c132ee87c7761bd6886091
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Jul 28 14:53:44 2009 +0200
+
+ 83xx, kmeter1, fix: update in the DTS the correct size for the first flash
+
+ When updating the "reg" in the "/localbus/flash@f0000000,0" node
+ size was wrong updated for the first flash, because the total
+ size was filled in, instead of the right size for it.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 4c2e3da82dc2b7f8b39b7f1d57f570e4bc5caa6d
+Author: Kumar Gala <kumar.gala@freescale.com>
+Date: Tue Jul 28 21:49:52 2009 -0500
+
+ Update Freescale copyrights to remove "All Rights Reserved"
+
+ "All Rights Reserved" conflicts with the GPL.
+
+ Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
+
+commit bb4291e62579dbc611e84eaaf973631e0bf129c7
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Fri Jul 24 11:27:14 2009 +0200
+
+ arm nomadik: add i2c
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 60cbfbfd0fbebb4682f10ba96f622bfe17317598
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Fri Jul 24 11:27:03 2009 +0200
+
+ arm nomadik: add gpio support
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 549b98306d897ae5991362d6096a36df50efe686
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:32 2009 -0500
+
+ OMAP3 Remove twl4030 defines
+
+ These defines have been subplanted by the equivelent defines in
+ include/twl4030.h
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit fccc0fcaaae5154612f8259365d26d04f204859f
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:31 2009 -0500
+
+ OMAP3 Move twl4030 mmc function
+
+ Because twl4030 now has its own device files, move and rename
+ twl4030_mmc_config.
+
+ twl4030_mmc_config initializes the twl4030 power setting to
+ the mmc device. Because it is in the twl4030 power domain, move
+ it out of drivers/mmc/omap3_mmc.c and into drivers/power/twl4030.c.
+
+ The function was renamed to twl4030_power_mmc_init because all
+ the functions in this file are to have the format
+
+ twl4030_power_<device>_<action>
+
+ In this case the suffix is mmc_init so
+ device : mmc
+ action : init
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 2c15513010493435c78f83202940ac3be11de2c3
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:30 2009 -0500
+
+ OMAP3 Move twl4030 power and led functions
+
+ Because twl4030 now has its own device files, move exiting
+ omap3 power_init_r to a new location.
+
+ power_init_r is the only function in board/omap3/common.
+ It initializes the twl4030 power for the board and enables
+ the led.
+
+ The power part of the the function is moved to twl4030_power_init in
+ drivers/power/twl4030.c The power compilation is conditional on the
+ existing config variable CONFIG_TWL4030_POWER.
+
+ The led part is moved to twl4030_led_init in the new file
+ drivers/misc/twl4030_led.c The led compilation is conditional on
+ the new config variable CONFIG_TWL4030_LED
+
+ The directory board/omap3/common was removed because power_init_r
+ was the only function in it.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 3cb7a4805fc8fb4c09e4801e1c7d531186f20190
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 28 22:13:52 2009 +0200
+
+ TQM8xx* boards: set larger SMC Rx buffer len
+
+ Commit 2b3f12c2 added support for configurable SMC Rx buffer length on
+ 8xx systems. Enable this feature on TQM8xx* based boards.
+
+ This fixes the problem that pasting text in the middle of a line
+ (i. e. inserting in edit mode) did not work - only the first two
+ characters got inserted, the rest was lost.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4b7511478b62a539e5b066d19a986b75e5d9a527
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 28 22:07:37 2009 +0200
+
+ Fix ext2load return code
+
+ Make the ext2load command return 0 on success (instead of the file
+ length).
+
+ Also fix output format (get rid of random newlines) and some coding
+ style issues (long lines etc.).
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 56fdaadc124a8ef9ec0fd8ff578233ec3b1137be
+Author: Weirich, Bernhard <Bernhard.Weirich@riedel.net>
+Date: Wed Jun 10 14:00:37 2009 +0200
+
+ ext2: fix inode size and calculations
+
+ Signed-off-by: unsik Kim <donari75@gmail.com>
+ Signed-off-by: Bernhard Weirich <bernhard.weirich@riedel.net>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Tested-by: Wolfgang Denk <wd@denx.de>
+
+commit cd7826359ee71e8f6f3d68331930ab9cbe1c990e
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:29 2009 -0500
+
+ TWL4030 Add power reset button
+
+ The Zoom2 power reset button is on the top right side of the
+ main board. Press and hold for about to 8 seconds to completely
+ reset the board.
+
+ Some of the beta boards have a hardware problem that prevents
+ using this feature. If is difficult to further characterize the
+ boards that fail. So disable resetting for all beta boards.
+
+ The Zoom1 reset button is the red circle on the top right,
+ front of the board. Press and hold the button for 8 seconds to
+ completely reset the board.
+
+ After analyzing beagle, it was determined that other boards
+ that use the twl4030 for power managment can also make use
+ this function.
+
+ The resetting is done by the power management part of the twl4030.
+ Since there is no existing drivers/power, add one.
+
+ The compilation of power/twl4030.h is controlled by the config
+ variable CONFIG_TWL4030_POWER
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 8966eb4c1c2d894b2a76174ba904c26c5af815b8
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:28 2009 -0500
+
+ TWL4030 Add initial support
+
+ The TWL4030 supplies many peripherals for OMAP3 boards. These include
+ power management, usb and, keyboard.
+
+ The product description is found here:
+
+ http://focus.ti.com/docs/prod/folders/print/tps65950.html
+
+ Product reference document, tps65950.pdf, is found here:
+
+ http://www.ti.com/lit/gpn/tps65950
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 7f79dfb48b7419d5caa1cf932fcff4e2fb7040af
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:27 2009 -0500
+
+ OMAP I2C Fix the sampling clock.
+
+ This problem is seen on Zoom1 and Zoom2 in the startup and
+ when i2c probe is used
+
+ Before :
+
+ In: serial
+ Out: serial
+ Err: serial
+ timed out in wait_for_bb: I2C_STAT=1000
+ timed out in wait_for_bb: I2C_STAT=1000
+ timed out in wait_for_bb: I2C_STAT=1000
+ timed out in wait_for_pin: I2C_STAT=1000
+ I2C read: I/O error
+ timed out in wait_for_bb: I2C_STAT=1000
+ timed out in wait_for_bb: I2C_STAT=1000
+ Die ID #327c00020000000004013ddd05026013
+ Hit any key to stop autoboot: 0
+ OMAP3 Zoom1# i2c probe
+ Valid chip addresses:timed out in wait_for_bb: I2C_STAT=1000
+ 02 03 04 05 06 07 08 09 0A 0B 0C 0D <snip>
+
+ After :
+
+ In: serial
+ Out: serial
+ Err: serial
+ Die ID #327c00020000000004013ddd05026013
+ Hit any key to stop autoboot: 0
+ OMAP3 Zoom1# i2c probe
+ Valid chip addresses: 48 49 4A 4B
+
+ The addresses are for the twl4030.
+
+ The prescalar that converts the function clock to the sampling
+ clock is hardcoded to 0. The reference manual recommends 7
+ if the function clock is 96MHz.
+
+ Instead of just changing the hardcoded values, the prescalar
+ is calculated from the value I2C_IP_CLK.
+
+ The i2c #defines are in kHz. The speed passed into the
+ i2c init routine is in Hz. To be consistent, change the
+ defines to be in Hz.
+
+ The timing calculations are based on what is done in the
+ linux 2.6.30 kernel in drivers/i2c/buses/i2c_omap.c as
+ apposed to what is done in TRM.
+
+ The major variables in the timing caculations are
+ specified as #defines that can be overriden as required.
+
+ The variables and their defaults are
+
+ I2C_IP_CLK SYSTEM_CLOCK_96
+ I2C_INTERNAL_SAMPLING_CLK 19200000
+ I2C_FASTSPEED_SCLL_TRIM 6
+ I2C_FASTSPEED_SCLH_TRIM 6
+ I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
+ I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
+ I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
+ I2C_HIGHSPEED_PHASE_TWO_SCLH I2C_FASTSPEED_SCLH_TRIM
+
+ This was runtime verified on Zoom1, Zoom2, Beagle and Overo.
+ The 400kHz and 3.4M cases were verifed on test Zoom1,
+ Zoom2, Beagle and Overo configurations.
+
+ Testing for omap2 will be done in a second step as Nishanth
+ and Jean-Christophe commented.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 4ce5a72851ff2960543b125866c6132e0094e1ee
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Jul 20 09:59:37 2009 +0200
+
+ arm, i2c: added support for the TWSI I2C Interface
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 042d01c72e0ea95731708dd24bb8b6cf42e75c80
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 27 09:13:38 2009 +0200
+
+ ppc4xx: Fix problem with NOR range assignment in Canyonlands ft_board_setup
+
+ This patch fixes the problem, that the current fdt board fixup code only
+ set's one range, the one for NOR. By this it's overwriting the already
+ correctly configured values done in __ft_board_setup(). Just remove this
+ now unneeded NOR fixup and all the ranges are correctly defined.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Dirk Eibach <eibach@gdsys.de>
+ Cc: Felix Radensky <felix@embedded-sol.com>
+
+commit 11a1604f8d0a8d936b42f6435d004b4aa33a5d87
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 27 07:42:48 2009 +0200
+
+ ppc4xx: Add some NAND-booting bootstrap entries to Kilauea chip_config cmd
+
+ This patch adds some I2C bootstrap setting for NAND booting to the Kilauea
+ chip_config command ("533-nand" and "600-nand").
+
+ Additionally some incorrectly indented lines are fixed.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5b34691ff87821891375b28ec5bcf5154575a735
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 27 07:42:37 2009 +0200
+
+ ppc4xx: Kilauea: Fix SDRAM init in NAND booting version
+
+ DDR2 Auto-calibration needs to be disabled on the NAND booting PPC4xx
+ targets. Otherwise the configured fixed init values for some DDR2
+ controller registers (e.g. RQDC) are not initialized at all resulting
+ in a non working SDRAM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f3ed3c9b7441cde936d06a1ff7b1490ff0d600e6
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 27 10:53:43 2009 +0200
+
+ ppc4xx: Fix Arches DDR2 initialization
+
+ Testing on AMCC Arches with the latest U-Boot version yielded that DDR2
+ initialization is currently broken. U-Boot hangs upon relocation to SDRAM
+ or crashes with random traps. This patch fixes this problem. Arches now
+ uses a different WRDTR and CLKTR default setting than Canyonlands/Glacier.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ab4c62c1ba788bf7f673a985d99a76d9c2fd7eca
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Mon Jul 27 08:49:48 2009 +0200
+
+ ppc4xx: Add GDsys CompactCenter board support.
+
+ Board support for the Guntermann & Drunck CompactCenter and
+ DevCon-Center.
+ Based on the AMCC Canyonlands board support by Stefan Roese.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c2e49f706ba13213f3c8da3a33e88010214e1997
+Author: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+Date: Sat Jul 25 06:19:12 2009 +0200
+
+ mpc83xx: Add esd VME8349 board support
+
+ This patch adds support for the esd VME8349 board equipped with the
+ MPC8349. It's a VME PMC carrier board equipped with the Tundra
+ TSI148 VME-bridge.
+
+ Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit fe613cdd4eb2c5b257a60d8dfb7759742318c28a
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Jul 23 17:10:55 2009 -0400
+
+ sbc8349: combine HRCW flash and u-boot image flash
+
+ Up to this point in time, the sbc8349 board was storing the u-boot
+ image in flash 2x. One for the HRCW value at the beginning of
+ flash (0xff80_0000), and once close to the end of flash (0xfff8_0000)
+ for the actual image that got executed.
+
+ This moves the TEXT_BASE to be the beginning of flash, which makes
+ the second copy of the image redundant, and frees up the flash
+ from the end of the environment storage to the end of the flash
+ device itself.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit be9b56df02168ca97562d6b9ec791136e4cd925a
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Jul 23 14:09:38 2009 -0500
+
+ mpc83xx: CONFIG_83XX_GENERIC_PCI is now synonymous with CONFIG_PCI; remove the former
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 94978e19f31d225b4f7d97c4acbac1ecfaeb8f69
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 10:37:37 2009 +0200
+
+ Prepare 2009.08-rc1 (again, after fixing last minute issues).
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9689ddcca6e01f3637b4442fa8575f29ef4d7aa3
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 10:06:39 2009 +0200
+
+ cpu/arm920t/start.S: include <common.h> to have ROUND() defined
+
+ Commit fcd3c87e made include/common.h usable by assembler code but
+ failed to update cpu/arm920t/start.S
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c9ed38cb6de50fdb4aaa60b668c555002903b211
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 10:01:11 2009 +0200
+
+ at91cap9adk: fix #ifdef/#endif pairing (2nd try)
+
+ Commit 7024aa14 was supposed to fix the #ifdef/#endif pairing in
+ include/configs/at91cap9adk.h, but did not cate all problems.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fb364bec5f29164d3ee681fcd9d187be8435db12
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 09:58:14 2009 +0200
+
+ Fix include/common.h for boards with CONFIG_STATUS_LED
+
+ The reordering of include/common.h by commit fcd3c87e495f3c48 broke
+ boards with status LED support, resulting in
+ error: #error Status LED configuration missing
+ errors. Undo this reordering to avoid this issue.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 942828a0980b3cea7db698784cc7f6a3e7740b2b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 09:19:15 2009 +0200
+
+ ABI: fix build problems due to now needed div64 routine.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 85d6bf0bdc8ccad2d67a9160472f6f8c6bb482fb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 08:50:59 2009 +0200
+
+ PMC405DE: fix out of tree building
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 10c7604d021949464b1e4ba903df95e6b2f0d2ff
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 00:24:55 2009 +0200
+
+ Prepare 2009.08-rc1
+
+ Update CHANGELOG, minor coding style fix.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fafbb2c3e4b35b60ca303ed2ad1c6cf400cd9a22
+Author: rhabarber1848@web.de <rhabarber1848@web.de>
+Date: Fri Jul 24 08:16:30 2009 +0200
+
+ add WATCHDOG_RESET to allow LZMA kernel decompression on slow machines
+
+ Signed-off-by: rhabarber1848@web.de
+
+commit 3c972849f2becbf19c13a24f090d293f37ecf616
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Thu Jul 23 23:31:58 2009 +0200
+
+ Less verbose output when loading vxworks 6.x images
+
+ Loading vxWorks 5.x images resulted just into 3 or 4 lines of output.
+ With vxWorks 6.x and the new GCC it emits about 30 lines, which is
+ far too noisy in my opinion.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit fcd3c87e495f3c48b70c919869fb1e0b93d4880b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 24 00:17:48 2009 +0200
+
+ Make include/common.h usable by assembler code
+
+ Commit 70ebf316 factored out the ROUND() macro into include/common.h,
+ not realizing that the primary use of this macro on AT91 systems was
+ in start.S where common.h was not included, and could not be included
+ because it contains a lot of C code which the assembler doesn't
+ understand.
+
+ This patch wraps such code in common.h in a "#ifndef __ASSEMBLY__"
+ construct, and then adds an include to cpu/arm926ejs/start.S thus
+ solving the problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit deec15b3064d3bb0189aede3c2921fd7ee401a0f
+Author: Heiko Schocher <heiko.schocher@invitel.hu>
+Date: Thu Jul 23 13:27:04 2009 +0200
+
+ arm: add _lshrdi3.S
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 52b1bf2c5cd2f8af880dab503d0039b35570665b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 23 13:15:59 2009 +0200
+
+ Make linking against libgcc configurable
+
+ Many (especially ARM) tool chains seem to come with broken or
+ otherwise unusable (for the purposes of builing U-Boot) run-time
+ support libraries `libgcc.a'. By using the "USE_PRIVATE_LIBGCC"
+ setting we allow to use alternative libraries instead.
+
+ "USE_PRIVATE_LIBGCC" can either be set as an environment variable in
+ the shell, or as a command line argument when running "make", i. e.
+ $ make USE_PRIVATE_LIBGCC=yes
+ or
+ $ USE_PRIVATE_LIBGCC=yes
+ $ export USE_PRIVATE_LIBGCC
+ $ make
+
+ The value of "USE_PRIVATE_LIBGCC" is the name of the directory which
+ contains the alternative run-time support library `libgcc.a'. The
+ special value "yes" selects the directory $(OBJTREE)/lib_$(ARCH) .
+
+ Note that not all architectures provide an alternative `libgcc.a' in
+ their lib_$(ARCH) directories - so far, only ARM does.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Prafulla Wadaskar <prafulla@marvell.com>
+ cc: Stefan Roese <sr@denx.de>
+
+commit 479105065d965121f57b55dcfe83a940cba46ac1
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jul 22 17:51:56 2009 +0200
+
+ Use do_div from div64.h for vsprintf
+
+ Use do_div from div64.h for vsprintf in case of 64bit division.
+ For 32bit division, do_div from div64.h can't be used as it
+ needs a 64bit parameter.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+ CC: Simon Kagstrom <simon.kagstrom@netinsight.net>
+
+commit 48287792384a93d77d43aaaa1c06cac275bbe1bb
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Jul 20 09:47:47 2009 +0900
+
+ Fix compiler warnings after loff_t change
+
+ Now 'env_addr' type is loff_t so use correct field type.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 9c67352f727a5b5eff531c852f9cff59fcb17f7f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 26 23:28:02 2009 +0200
+
+ Revert "ppc: Unlock cache-as-ram in a consistent manner"
+
+ This reverts commit 982adfc610669482a32127282fe489857a92cfe3.
+
+ This patch causes problems on MPC83xx boards - flash recognition stops
+ working.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 35cf3b57eafe3ee1f693e24267e0ecfefab60251
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Fri Jul 24 10:31:48 2009 +0200
+
+ update the EB+MCF-EV123 board support
+
+ This patch updates the support for EB+MCF-EV123 board and needs
+ the [PATCH 1/2 V3] new video driver for bus vcxk framebuffers
+
+ * remove the board framebuffer driver
+ * use the common bus_vcxk framebuffer driver
+ * adds bmp support
+ * adds splashimage support
+ * fix serveral cosmetical errors
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+ [agust@denx.de: fixed some style issues before applying]
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 04538cdb752eeea8fd23cf7ac3394439f189fb77
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Sun Jul 26 12:05:25 2009 +0200
+
+ video: bus_vcxk.c: fix style issues added by 50217dee
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 50217deeb07911d686790d34d468eb9a5245f68d
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Fri Jul 24 10:09:02 2009 +0200
+
+ new video driver for bus vcxk framebuffers
+
+ This patch adds a new video driver
+
+ * adds common bus_vcxk framebuffer driver
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+ [agust@denx.de: fixed lots of style issues before applying]
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 60e97419246d0a3615758ad6af40680aefb5f7f1
+Author: Alessandro Rubini <rubini@gnudd.com>
+Date: Tue Jul 21 14:09:45 2009 +0200
+
+ lcd.h: define extern vidinfo_t for all cases
+
+ include/lcd.h has different vidinfo for different platforms,
+ and several extern declaration, but one for the default case was
+ missing. This makes them a single extern declaration for everyone.
+
+ Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
+
+commit bcf0b5248952c6b03081dc5cc4ff9e0b2299c5fa
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Sun Jul 26 11:04:59 2009 +0200
+
+ mimc200.c: fix too long lines added by f68378d6
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit f68378d60a905d43155f2e89bf81999d3c93a90a
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Tue Jul 21 11:35:22 2009 +0100
+
+ Add LCD support to MIMC200 board
+
+ This patch updates the MIMC200 files to enable the LCD.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 69f32e6c24d41fcdf347ff64e9c13b25059ace58
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Tue Jul 21 11:18:44 2009 +0100
+
+ Add 16bit colour support in lcd.h
+
+ This patch adds support for LCD_COLOR16 in include/lcd.h.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit bdc873ea063b8cc6d44c6ab748b7723a97d8d7b3
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Sun Jul 26 10:34:58 2009 +0200
+
+ lib_avr32/board.c: fix too long line added by 716ece1d
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 716ece1de9a7d43a61d8698ac41b71b64f66f9e9
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Tue Jul 21 11:11:37 2009 +0100
+
+ Add AVR32 LCD support
+
+ This patch adds support for the AVR32 LCD controller. This patch is
+ based off the latest u-boot-video.
+
+ A quick summary of what's going on:-
+
+ Enable LCDC pixel clock
+ Enable LCDC port pins
+ Add framebuffer pointer to global_data struct
+ Allocate framebuffer
+
+ To use the new code, update your board config to include something like
+ this:-
+
+ #define CONFIG_LCD 1
+
+ #if defined(CONFIG_LCD)
+ #define CONFIG_CMD_BMP
+ #define CONFIG_ATMEL_LCD 1
+ #define LCD_BPP LCD_COLOR16
+ #define CONFIG_BMP_16BPP 1
+ #define CONFIG_FB_ADDR 0x10600000
+ #define CONFIG_WHITE_ON_BLACK 1
+ #define CONFIG_VIDEO_BMP_GZIP 1
+ #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE 262144
+ #define CONFIG_ATMEL_LCD_BGR555 1
+ #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+ #define CONFIG_SPLASH_SCREEN 1
+ #endif
+
+ The standard U-Boot BMP and Splash-screen features should just work.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+ [agust@denx.de: fixed some style issues]
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 6111722a9281c6e04a7304d502556afff6a5a1f8
+Author: Alessandro Rubini <rubini@gnudd.com>
+Date: Sun Jul 19 17:52:27 2009 +0200
+
+ video: move extern declarations from C to headers
+
+ This moves some extern declaration from lcd.c to lcd.h, removing
+ unneeded ifdef around a pair of them. Additionally, since
+ gunzip_bmp() was declared static in cmd_bmp.c but extern in lcd.c, I
+ removed the static. The extra "#include <lcd.h>" in cmd_bmp.c is
+ added to ensure the header is consistent with the source.
+
+ This has been compile-tested on both ARM (at91 boards) and PowerPC
+ (HH405_config, TQM823L_LCD_config, mcc200_config), to test all use
+ combinations.
+
+ Signed-off-by: Alessandro Rubini <rubini@gnudd.it>
+ [agust@denx.de: removed gunzip_bmp() fixes as commit c01171ea did it]
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit f51e001143c58447eb50e7aefa2b09eb4cc1410c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 23 16:26:58 2009 -0400
+
+ Blackfin: restore EVT1 handling in linker script
+
+ Sadly, the Blackfin linker script unification lost a small #ifdef logic
+ needed on older parts. Restore that CONFIG_BFIN_BOOTROM_USES_EVT1 logic.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f33b325af666b12eafa9ab235b2cd59832d6e51c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 24 14:24:07 2009 +0200
+
+ Revert "zlib: updated to v.1.2.3"
+
+ This reverts commit b201171f2b4d509f3ad510b214bee70ff902e3d6.
+
+ The commit caused problems for example when unpacking kernel images:
+
+ Uncompressing Kernel Image ... Error: inflate() returned -2
+ GUNZIP: uncompress, out-of-mem or overwrite error - must
+ RESET board to recover
+
+ Conflicts:
+
+ include/u-boot/zlib.h
+ lib_generic/zlib.c
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4b1389e0ceb19e9b50b96fd3908483a6c2274fb0
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 21 14:06:29 2009 +0200
+
+ ppc4xx: Add chip_config command to AMCC Kilauea eval board
+
+ This patch removes the "alterpll" command and replaces it with the now
+ ppc4xx standard "chip_config" command to configure the I2C bootstrap
+ EEPROM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f6af8ce0c80327cb6aaa347642026ad838335c23
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 21 14:33:52 2009 +0200
+
+ ppc4xx: Fix EEPROM configuration on Kilauea
+
+ Kilauea has an AT24C02 EEPROM which has an 8 byte page. Without defining
+ CONFIG_SYS_EEPROM_PAGE_WRITE_BITS to 3 the "eeprom" command doesn't
+ work correctly.
+
+ Additionally the page write delay (CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
+ is set to a more defensive value of 10ms.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 99d8b23bc7e2be04fcbf49c5cec9f5ae76df290c
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Wed Jul 22 13:56:21 2009 +0200
+
+ ppc4xx: Add 405EP based PMC405DE board
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit da799f66ad1d4fc36dd20cc2d7e584493fda8546
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Mon Jul 20 12:15:38 2009 +0200
+
+ ppc4xx: Add struct for 4xx GPIO controller registers
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 58ea142fb2e969f32306c8da1dabfaebd6fa141a
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Wed Jul 22 17:27:56 2009 +0200
+
+ ppc4xx: Replace 4xx lowercase SPR references
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 87c0b72908e05662b8b415e26e1042f4779629da
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 20 06:57:27 2009 +0200
+
+ Add "chip_config" command for PPC4xx bootstrap configuration
+
+ This patch adds a generic command for programming I2C bootstrap
+ eeproms on PPC4xx. An implementation for Canyonlands board is
+ included.
+
+ The command name is intentionally chosen not to be PPC4xx specific.
+ This way other CPU's/SoC's can implement a similar command under
+ the same name, perhaps with a different syntax.
+
+ Usage on Canyonlands:
+
+ => chip_config
+ Available configurations (I2C address 0x52):
+ 600-nor - NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100
+ 600-nand - NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100
+ 800-nor - NOR CPU: 800 PLB: 200 OPB: 100 EBC: 100
+ 800-nand - NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100
+ 1000-nor - NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100
+ 1000-nand - NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100
+ 1066-nor - NOR CPU:1066 PLB: 266 OPB: 88 EBC: 88 ***
+ 1066-nand - NAND CPU:1066 PLB: 266 OPB: 88 EBC: 88
+ => chip_config 600-nor
+ Using configuration:
+ 600-nor - NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100
+ done (dump via 'i2c md 52 0.1 10')
+ Reset the board for the changes to take effect
+
+ Other 4xx boards will be migrated to use this command soon
+ as well.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+
+commit 10c1b218556ed9871f36bc0c407f4f2f6196353b
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:16 2009 -0500
+
+ xpedite1k: Move to X-ES vendor directory
+
+ The XPedite1000 is an X-ES product thus it can be put in board/xes along
+ with other X-ES boards. Along with the move, the board was renamed to
+ XPedite1000 from XPedite1K to fit X-ES's standard naming convention.
+ Maintainership was also transfered to Peter Tyser.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 54381b79d268e1bead5d78ed8423df31a3cb0e2c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:15 2009 -0500
+
+ xpedite1k: Sync checkboard() with other X-ES boards
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9b4ef1f5dc0daab64f46249a32e67279c4d44fd2
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:14 2009 -0500
+
+ xpedite1k: Sync up board config options with other X-ES boards
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4cdad5f43ae67e4ceeac69ef4af4392bd2f7381f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:13 2009 -0500
+
+ xpedite1k: Sync organization of board config with other X-ES boards
+
+ This change should have no functional effect
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c4ae1a0257a0f5008ee2686e8aa92fba3992f279
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:12 2009 -0500
+
+ xpedite1k: Sync up commands and environment with other X-ES boards
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fbc7951ea84c2fe6da0f6007b672ed35bae91acb
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:11 2009 -0500
+
+ xpedite1k: Disable unused ethernet port 1
+
+ The XPedite1000 only has 2 available ethernet ports:
+ ppc_4xx_eth2 (EMAC2) and ppc_4xx_eth3 (EMAC3)
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 767e32ad369d83f55f950e6938e68b6dba7fa65f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:10 2009 -0500
+
+ xpedite1k: Store environment in flash
+
+ Previously an I2C EEPROM was used. The EEPROM had size, reliability,
+ and access issues which are resolved by storing the environment in
+ flash.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b88da157f9990cd2cb081e4faea4b9581b5d0e2f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:09 2009 -0500
+
+ xpedite1k: Add support for additional GPIO pins
+
+ Enable GPIO pins for an I2C EEPROM write protect, a system reset pin,
+ and a PMC #MONARCH pin. These pins are not currently used in U-Boot,
+ but are used in OSes and may be used in U-Boot in the future.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 42735815dd9ba39efe51203868aebce04053c8de
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:08 2009 -0500
+
+ xpedite1k: Add support for optional flashes
+
+ The XPedite1000 can be built with 4 total flashes:
+ - 512KB AMD socketed
+ - 16MB Intel soldered
+ - 2 x 32MB AMD MirrorBit flashes
+
+ Add support for the optional 2 32MB CFI-compliant AMD flashes
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e02990764c7415c84668823a0fc8c5b4dd8d8cf0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:07 2009 -0500
+
+ xpedite1k: Cleanup coding style
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 086ff34a3a7e5e595630d658c1c13778399452d1
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:06 2009 -0500
+
+ xpedite1k: Remove support for reading MACs from EEPROM
+
+ By default, the XPedite1000 comes installed with xMon, a proprietary
+ bootloader. xMon stores its MAC address in an onboard EEPROM. Rather
+ than requiring a non-standard location in the EEPROM to be reserved for
+ MAC addresses, store the MAC addresses in U-Boot's standard environment.
+ A U-Boot application or OS application can be used to migrate xMon MAC
+ addresses to U-Boot's environment if necessary.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 108d6d0099372f9f6532c3198fbaacabc121c9b3
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:05 2009 -0500
+
+ xpedite1k: Remove support for fixed SDRAM configuration
+
+ All XPedite1000's have SPD EEPROMs present and no fixed configuration
+ parameters are currently defined or used
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c86d00a2ed923002f1ab0bfb0a925522628302e9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:04 2009 -0500
+
+ xpedite1k: Remove CONFIG_SYS_DRAM_TEST support
+
+ POST or command line tests provide similar functionality
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 11ad309c183b176d8866944026a63c0f1c626f56
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:03 2009 -0500
+
+ xpedite1k: Use standard CFI flash driver
+
+ Using the CFI flash driver will allow write access to the 16MB Intel
+ StrataFlash present on the XPedite1000. The 512KB socketed (non
+ CFI-compliant flash) will no longer be writable.
+
+ The mapping of the 16MB Strata flash was moved to 0xff000000 and the
+ 512KB AMD socketed flash was moved to 0xfe000000.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d4d2e79bb433fc7ec18c68cc49cc6b7433d1320c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Jul 16 22:13:57 2009 +0200
+
+ ppc4xx: Cleanup PLU405 board code
+
+ Some Coding style cleanup (braces, whitespaces, long lines)
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b209a114829dc8a7a0e39a9335b6e4aebf9742cb
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Fri Jul 17 14:16:40 2009 +0200
+
+ ppc4xx: Add DL-Vision 405EP board support
+
+ Board support for the Guntermann & Drunck DL-Vision.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9b1b8c8a1bf52e9b65e1958e5205838576066cbc
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Fri Jul 10 14:47:32 2009 +0200
+
+ ppc4xx: Fix missing freqOPB for 405EP
+
+ In cpu/ppc4xx/speed.c initialization of sysInfo->freqOPB for 405EP was
+ left out for no obvious reason.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0a371ca08908c9b2a58171223a79bffea1f7c6f5
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 14 15:53:08 2009 +0200
+
+ ppc4xx: Fix TLB reset problem with recent 44x images
+
+ Patch d873133f [ppc4xx: Add Sequoia RAM-booting target] broke "normal"
+ booting on some 44x platforms. This breakage is only noticed in some
+ cases while powercycling. As it seems, the code in question in start.S
+ didn't invalidate TLB #0. This makes sense since this TLB is used for
+ the bootrom mapping. With the patch mentioned above even TLB #0 got
+ invalidated resulting in an error later on.
+
+ This patch now fixes this issue by only invalidating TLB #0 in the RAM-
+ booting case.
+
+ Tested succesfully on Sequoia and Canyonlands.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Dirk Eibach <Eibach@gdsys.de>
+
+commit 44259bb9e696d22bf1773181111855a29f00cf33
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Fri Jul 17 19:56:30 2009 +0530
+
+ usb: bugfix driver/usb/host/ehci-hcd.c function ehci_submit_root
+
+ This change is cheked in Linux source and fix found to be in sync.
+ This patch is tested for USB host interface on Kirkwood based
+ Sheevaplug platform (ARM little endian board)
+
+ Risk: the impact of this patch is not validated on big endian board.
+ This need to be checked...
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 28958b8bea4c66629c5a22fd3c8b0d49df90383d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 23 22:23:23 2009 +0200
+
+ Coding Style cleanup; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2632c008e2c2cd61fefb622ed671ea3e6bd2e2a6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jul 21 22:59:36 2009 -0400
+
+ autoconf.mk: include before config.mk for top level files
+
+ By including autoconf.mk before config.mk, all top level files can use any
+ config options it sets up (like <arch>_config.mk) or the Makefile itself
+ without being forced to use lazy evaluation.
+
+commit c01171eaecc963d2c1f56a0984a0cbcdd8a3ab3c
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Tue Jul 21 11:30:53 2009 +0100
+
+ Remove static declaration from gunzip_bmp()
+
+ This patch removes the static declaration from gunzip_bmp()
+
+ Without it, the gunzip_bmp() function is not visible to
+ common/lcd.c and fails to compile with an error.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 2d4a43e230a3c8bfd03b9beaa0eb2a95e779c03b
+Author: Peter Tyser <ptyser@gmail.com>
+Date: Mon Jul 20 21:51:38 2009 -0500
+
+ cmd_tsi148: General cleanup
+
+ - Fix command help message
+ - Disable DEBUG by default
+ - Fix whitespace issues
+ - Fix lines > 80 characters
+
+ Signed-off-by: Peter Tyser <ptyser@gmail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 9aef73888509d10193615ee5cd9cf439ca44e937
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jul 19 15:17:03 2009 -0400
+
+ unify HOST_CFLAGS and HOSTCFLAGS
+
+ The top build system sets up HOSTCFLAGS a bit and exports it, but other
+ places use HOST_CFLAGS instead. Unify the two as HOSTCFLAGS so that the
+ values stay in sync.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2e9393f500065f940e5e4ac7fe375e4c0b77b936
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 23 21:16:59 2009 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e3b39f84e974df70065fa248f0f63993b1708c9d
+Author: André Schwarz <andre.schwarz@matrix-vision.de>
+Date: Fri Jul 17 14:50:24 2009 +0200
+
+ update config for mvBC-P (MPC5200)
+
+ This patch adds I2C support for mvBC-P and defines flash layout
+ matching the shipped product.
+
+ Signed-off-by: André Schwarz <andre.schwarz@matrix-vision.de>
+
+commit cb6d0b72c2c4f13c0075a7ae92e11682ec94a311
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 13 09:24:00 2009 -0500
+
+ ahci: Fix gcc 4.4 compiler warning
+
+ ahci.c: In function 'ata_scsiop_read_capacity10':
+ ahci.c:616: warning: dereferencing type-punned pointer will break strict-aliasing rules
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 51d91e1a253c97713c7f3e5c0b910a4db4979283
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 13 09:23:59 2009 -0500
+
+ drivers/bios_emulator: Fix gcc 4.4 compiler warning
+
+ biosemu.c: In function 'BE_setVGA':
+ biosemu.c:147: warning: dereferencing type-punned pointer will break strict-aliasing rules
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f97ec30bb3c5a4a456159eb2b75b3bc68772bf2a
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Jul 13 16:01:19 2009 +0200
+
+ Re-add support for image type 'Standalone Program'
+
+ Support for this type was lost during the bootm refactoring.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit ca95c9df0280f40e8e4befadbaae21fa67d92331
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Jul 13 16:01:18 2009 +0200
+
+ Add error checking for unsupported OS types.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 982adfc610669482a32127282fe489857a92cfe3
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 10 18:46:10 2009 -0500
+
+ ppc: Unlock cache-as-ram in a consistent manner
+
+ Previously, non-e500 architectures only unlocked their data cache which
+ was used as early RAM when booting to Linux using the "bootm" command.
+ This change causes all PPC boards with CONFIG_SYS_INIT_RAM_LOCK defined
+ to unlock their data cache during U-Boot's initialization. This
+ improves U-Boot performance and provides a common cache state when
+ booting to different OSes.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b201171f2b4d509f3ad510b214bee70ff902e3d6
+Author: Giuseppe CONDORELLI <giuseppe.condorelli@st.com>
+Date: Thu Jul 23 04:54:45 2009 -0400
+
+ zlib: updated to v.1.2.3
+
+ This patch updates zlib to the latest stable version.
+
+ Only relevant zlib parts were ported to u-boot tree, as was done for
+ the previously used version of zlib (0.95). New zlib gives faster
+ inflate performance and other improvements, see www.zlib.net
+
+ Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
+ Reviewed-by: Angelo Castello <angelo.castello@st.com>
+
+ Edited commit message
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 97cfe86163505ea18e7ff7b71e78df5bb03dad57
+Author: Robin Getz <rgetz@blackfin.uclinux.org>
+Date: Tue Jul 21 12:15:28 2009 -0400
+
+ Save server's MAC address in environment
+
+ Linux's netconsole works much better when you can pass it the MAC address of
+ the server. (otherwise it just uses broadcast, which everyone else on my
+ network complains about :)
+
+ This sets the env var "serveraddr" (to match ethaddr), so that you can pass
+ it to linux with whatever bootargs you want to....
+
+ addnetconsole=set bootargs $(bootargs) netconsole=@$(ipaddr)/eth0,@$(serverip)/$(serveraddr)
+
+ Signed-of-by: Robin Getz <rgetz@blackfin.uclinux.org>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0b23fb368d08c9669fac647971ff249c3f9fee8f
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Tue Jul 21 19:32:21 2009 +0400
+
+ fec_mxc: driver for FEC ethernet controller on i.MX27
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0544c63681d2ea3607faf374e9c56f101e365b42
+Author: Alessio Centazzo <centazzo@gmail.com>
+Date: Sat Jul 11 11:56:06 2009 -0700
+
+ ppc4xx: Fixed compilation warning in 4xx_enet.c
+
+ This patch fixes a compilation warning for some Ethernet PHY-less
+ PPC4xx platforms (440SPE based ones) and a potential compilation
+ error for 440SP platforms (use of undefined 'ethgroup' variable).
+ In the original code and in case of 440SPE platforms, 'ethgroup'
+ is initialized to -1 and never modified. Later in the function,
+ within an #ifdef statement, an 'if statement' executes code only
+ if 'ethgroup' is set to 4, therefore it is harmless to avoid
+ executing the 'if statement' by removing the CONFIG_440SPE from
+ the affected #ifdefs. In case of 440SP platforms with on-board
+ Ethernet PHY, 'ethgroup' is undefined but used (there are not such
+ platforms in the repository yet). All other architectures are not
+ affected by this change.
+
+ Signed-off-by: Alessio Centazzo acpatin@yahoo.com
+ Acked-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 09133f8580f0106429ba3600f1855bd3577ae58b
+Author: Michael Zaidman <michael.zaidman@gmail.com>
+Date: Tue Jul 14 23:37:12 2009 +0300
+
+ DHCP regression on 2009-06
+
+ Fixed the DHCP/BOOTP/RARP regression introduced in u-boot-2009.06
+ by initializing our IP addr to 0 in order to accept any IP addr
+ assigned to us by the DHCP/BOOTP/RARP server.
+
+ Ack-by: Robin Getz <rgetz@blackfin.uclinux.org>
+ Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 443ce4ac9d1138ae5ae6863b2d40a96fd6edf523
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Thu Jul 16 20:58:02 2009 +0530
+
+ net: phy: bugfixes: mv88E61xx multichip addressing support
+
+ With these fixes, this driver works properly for multi chip
+ addressging mode
+
+ Bugfixes:
+ 1. Build error fixed for function mv88e61xx_busychk_multic-fixed
+ 2. PHY dev address error detection- fixed
+ 3. wrong busy bit was refered in function mv88e61xx_busychk -fixed
+ 4. invalid data read ptr was refered for RD_PHY in case of
+ multichip addressing mode -fixed
+
+ The Multichip Address mode is tested with RD6281A board having
+ MV88E6165 switch on it
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 16025ea45539219f2a7c750c6f0ae983ea5c2737
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Wed Jul 8 13:05:11 2009 +0200
+
+ arm: Kirkwood: Check the error summary bit for error detection
+
+ The Marvell documentation for the 88f6281 states that the error coding
+ is only valid if the error summary and last frame bits in the transmit
+ descriptor status field are set. This patch adds checks for these for
+ transmit (I would get transmit errors on bootp with the current check,
+ which I believe are spurious).
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 7b05f5e027b81cd3a9a41c6c6d3fe09c72fa93f6
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Wed Jul 8 13:03:18 2009 +0200
+
+ arm: Kirkwood: Fix compiler optimization bug for kwgbe_send
+
+ kwgbe_send/recv both have loops waiting for the hardware to set a bit.
+ GCC 4.3.3 cleverly optimizes the send case to ... a while(1); loop. This
+ patch uses readl to force a read from device memory. Other volatile
+ accesses have also been replaced with readl/writel where appropriate
+ (as per suggestions on the U-boot mailing list).
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3f6b18ffd94621625de961bc566022b0266790f5
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Jul 2 13:21:22 2009 -0400
+
+ MIIPHYBB: Return 0xFFFF if the PHY is not asserting TA.
+
+ This patch sets the returned value to 0xFFFF if the PHY does not exist
+ and does not assert Transfer Acknowledge. A NULL check for the value
+ pointer is also added for buffer overflow protection.
+
+ Without this patch 'mii info' will show 'phantom' devices because the
+ value will be not be initialized and return with some random value.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 736fead8fdbf8a8407048bebc373cd551d01ec98
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Jul 20 22:01:11 2009 -0700
+
+ Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
+
+ All in-tree boards that use this controller have CONFIG_NET_MULTI added
+ Also:
+ - changed CONFIG_DRIVER_SMC911X* to CONFIG_SMC911X*
+ - cleaned up line lengths
+ - modified all boards that override weak function in this driver
+ - added
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Tested-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3bd0a877b74b9c005ae7cb892480ccedfa308c20
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Fri Jul 17 00:50:15 2009 -0700
+
+ Add warning about upcoming removal of old Ethernet API
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b7fe25d2a8d1cede401d09e1f9c84f8fe47bdbb1
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Thu Jul 2 16:15:13 2009 +0530
+
+ P2020RDB Added support of Vitesse PHYs VSC8641(RGMII) and VSC8221(SGMII)
+
+ These PHYs are on P2020RDB platform.
+
+ Also revamped Freescale copyright message in drivers/net/tsec.c.
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1a32bf41881b5dbe3119cb77a33572b4d462cabf
+Author: Robin Getz <rgetz@blackfin.uclinux.org>
+Date: Mon Jul 20 14:53:54 2009 -0400
+
+ Add DNS support
+
+ On 04 Oct 2008 Pieter posted a dns implementation for U-Boot.
+
+ http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg10216.html
+ >
+ > DNS can be enabled by setting CFG_CMD_DNS. After performing a query,
+ > the serverip environment var is updated.
+ >
+ > Probably there are some cosmetic issues with the patch. Unfortunatly I
+ > do not have the time to correct these. So if anybody else likes DNS
+ > support in U-Boot and has the time, feel free to patch it in the main tree.
+
+ Here it is again - slightly modified & smaller:
+ - update to 2009-06 (Pieter's patch was for U-Boot 1.2.0)
+ - README.dns is added
+ - syntax is changed (now takes a third option, the env var to store
+ the result in)
+ - add a random port() function in net.c
+ - sort Makefile in ./net/Makefile
+ - dns just returns unless a env var is given
+ - run through checkpatch, and clean up style issues
+ - remove packet from stack
+ - cleaned up some comments
+ - failure returns much faster (if server responds, don't wait for
+ timeout)
+ - use built in functions (memcpy) rather than byte copy.
+
+ Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
+ Signed-off-by: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 88ad3fd91c83a4343b25385fd78fd8e29ebb723f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Jul 17 12:17:00 2009 -0500
+
+ net: tsec - fix dereferencing type-punned pointer will break strict-aliasing rules warning
+
+ fix this gcc 4.4 warning:
+
+ tsec.c: In function 'tsec_init':
+ tsec.c:200: warning: dereferencing type-punned pointer will break strict-aliasing rules
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d9bec9f42ab34383737c8a94429aa02fe76d7946
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Jul 18 21:04:08 2009 -0400
+
+ net: rename NetRxPkt to NetRxPacket
+
+ The net code is mostly consistent in using 'Packet' rather than 'Pkt', so
+ rename the minor detractor to follow suite.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 88a4c2e77cd5674db745d0c2ebbad68c9baf760c
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Jun 25 16:33:04 2009 +0900
+
+ sh: sh_eth: Remove garbage from printf
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2ea20efa47da9d98ff38223ff51dea5439ad8708
+Author: Andreas Pretzsch <apr@cn-eng.de>
+Date: Thu Jul 9 21:50:05 2009 +0200
+
+ smc911x: add support for LAN9221
+
+ Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 7168eba729b9e6d730db7cd1028767f7b1a6128b
+Author: David Brownell <david-b@pacbell.net>
+Date: Tue Jun 9 11:14:24 2009 -0700
+
+ rm9200 ethernet driver: board-specific quirk (csb337)
+
+ CSB337 boards originally shipped with MicroMonitor, not U-Boot;
+ and with a version using a different convention for recording
+ Ethernet addresses than anyone else. To avoid breaking Linux
+ when it uses U-Boot, have it use the same convention on that
+ hardware.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 57215cd2e59fd403248df8f2f195e382900d5fc2
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Jul 16 09:58:31 2009 +0200
+
+ arm, kirkwood: added kw_gpio_set_valid() in gpio.h
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit ec16441085f471c03a8c0909579463e31e5b947a
+Author: Dieter Kiermaier <dk-arm-linux@gmx.de>
+Date: Mon Jun 29 14:45:08 2009 +0200
+
+ Kirkwood: add Marvell Kirkwood gpio driver
+
+ Signed-off-by: Dieter Kiermaier <dk-arm-linux@gmx.de>
+ Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Tested-by: Heiko Schocher <hs@denx.de>
+
+commit 688b6a0ff2dcbb0c7e63ef63cbbcc291f14f321f
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Jul 16 09:59:10 2009 +0200
+
+ arm, kirkwood: added KW_TWSI_BASE in kirkwood.h
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit fbc8365ad7ab0afd4143bdbffab2fd0b24df004f
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Thu Jul 16 21:02:24 2009 +0530
+
+ Marvell RD6281A Board support
+
+ This is Marvell's 88F6281_A0 based reference design board
+
+ This patch is tested for-
+ 1. Boot from DRAM/NAND flash/NFS
+ 2. File transfer using tftp and loadb
+ 3. NAND flash read/write/erase
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2906e6d654fcc7f2451fde225e4e8b3f20c9555f
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Fri Jul 17 16:35:19 2009 +0200
+
+ api: Fix broken build on ARM.
+
+ This patch fixes broken build introduced by commit
+ 84bf7ca522e94ec402a1264b01971b924b7e268f (api: remove un-needed
+ ifdef CONFIG_API already handle by the Makefile).
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+
+commit 48677a1ef5f82adca49145a7baf11ece77f51945
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 22 23:53:23 2009 +0200
+
+ Fix "ld: cannot find -lstubs" build error
+
+ Commit 1bc15386 moved the examples/ to examples/standalone but failed
+ to adapt the Makefiles that need to link against libstubs.a
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit ae71121a111ddf9dd057cacbbdd0f51054be428a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 20:47:36 2009 +0200
+
+ at91cap9adk: fix #ifdef/#endif pairing
+
+ The #ifdef/#endif pairing in this file was obviously messed up.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6b96a20d512b04a808438553874c00cf40812c44
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Mon Jul 20 11:40:01 2009 +0900
+
+ ARM Cortex A8: Move OMAP3 specific reset handler
+
+ Because of the reset_cpu is soc specific, should be move to soc
+
+ Cc: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 048e7efe91f66094f868281c12e488ce2bae8976
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 22 10:12:39 2009 -0500
+
+ 85xx/86xx: Replace in8/out8 with in_8/out_8 on FSL boards
+
+ The pixis code used in8/out8 all over the place. Replace it with
+ in_8/out_8 macros.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0a6d0c6320b77bd6572393a93e6b8ccdf39c7100
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jul 21 13:51:08 2009 -0500
+
+ xpedite5370: Enable NAND command support
+
+ Use the MPC8572's eLBC to access 1 GB (or greater) onboard NAND flash
+ via the 'nand' command.
+
+ Previously, the XPedite5370's NAND chip selects were properly
+ configured, but NAND support was not enabled.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 39121c0896a6760bd436d88c17892f49a97902d0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jul 21 13:51:07 2009 -0500
+
+ xes: Increase CONFIG_SYS_BOOTM_LEN to 16MB
+
+ Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to
+ support uncompressing images larger than 8 MB when using the bootm
+ command.
+
+ Note that recent Linux kernels for the 85xx and 86xx map greater than
+ 16MB of memory on bootup, but we use 16MB to maintain compatibility with
+ older Linux kernels for now.
+
+ Signed-off-by: Nate Case <ncase@xes-inc.com>
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 58f31b602dfd52eb7836ab82caa587514e046f02
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Jul 19 19:17:41 2009 -0500
+
+ xpedite5370: Fix I2C GPIO initialization typo
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Heiko Schocher<hs@denx.de>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5ff821006c6e7647d183ea95817044943bb22e7e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Jul 19 19:17:40 2009 -0500
+
+ xpedite5200,5370: Use buffered NOR flash writes
+
+ Buffered writes are possible on the XPedite5200 and XPedite5370 and greatly
+ improve NOR flash write speeds
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d9c147f371800a479a507a816b2fe572c97da197
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 10:14:48 2009 -0500
+
+ 85xx, 86xx: Add common board_add_ram_info()
+
+ Previously, 85xx and 86xx boards would display DRAM information on
+ bootup such as:
+
+ ...
+ I2C: ready
+ DRAM:
+ Memory controller interleaving enabled: Bank interleaving!
+ 2 GB
+ FLASH: 256 MB
+ ...
+
+ This patch moves the printing of the DRAM controller configuration to a
+ common board_add_ram_info() function which prints out DDR type, width,
+ CAS latency, and ECC mode. It also makes the DDR interleaving
+ information print out in a more sane manner:
+
+ ...
+ I2C: ready
+ DRAM: 2 GB (DDR2, 64-bit, CL=4, ECC on)
+ DDR Controller Interleaving Mode: bank
+ FLASH: 256 MB
+ ...
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 12a440ae6d09445140f1a0c2023dba76a9f1a617
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 10:14:47 2009 -0500
+
+ tqm85xx: Remove board_add_ram_info()
+
+ This is in preparation for adding one common 8xxx board_add_ram_info()
+ function for all 8xxx boards
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ed2c9488bbe389b7b25cada1e42bdae5d0976327
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 10:14:46 2009 -0500
+
+ xes: Remove 8xxx board_add_ram_info() function
+
+ This is in preparation for adding one common 8xxx board_add_ram_info()
+ fuction for all 8xxx boards
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e7ee23ec1788d8cf269a4cf6b9cd3722cbc7d592
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 10:14:45 2009 -0500
+
+ 86xx: Rename ccsr_ddr's sdram_mode_1, sdram_cfg_1 fields
+
+ Rename sdram_mode_1 to sdram_mode and sdram_cfg_1 to sdram_cfg to match
+ the 86xx user's manual and other Freescale architectures
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f6155c6fbb1d85f517b7c160570f0995ef14c43f
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Thu Jul 9 10:05:48 2009 +0800
+
+ 85xx: Add pci/pcie E1000 ethernet support for MPC8544DS and MPC8536 boards
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6bb5b412291177e6edd42f9a80e5c5afe57a6a0f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Jul 14 22:42:01 2009 -0500
+
+ 85xx: Report which "bank" of NOR flash we are booting from on FSL boards
+
+ The p2020DS, MPC8536DS, MPC8572DS, MPC8544DS boards are capable of
+ swizzling the upper address bits of the NOR flash we boot out of which
+ creates the concept of "virtual" banks. This is useful in that we can
+ flash a test of image of u-boot and reset to one of the virtual banks
+ while still maintaining a working image in "bank 0".
+
+ The PIXIS FPGA exposes registers on LBC which we can use to determine
+ which "bank" we are booting out of (as well as setting which bank to
+ boot out of).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9af9c6bdc16da53772c56b1a79c2c91701fe94e6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 15 13:45:00 2009 -0500
+
+ 86xx: Report which "bank" of NOR flash we are booting from on MPC8641HPCN
+
+ The MPC8641HPCN board is capable of swizzling the upper address bit of
+ the NOR flash we boot out of which creates the concept of "virtual"
+ banks. This is useful in that we can flash a test of image of u-boot
+ and reset to one of the virtual banks while still maintaining a
+ working image in "bank 0".
+
+ The PIXIS FPGA exposes registers on LBC which we can use to determine
+ which "bank" we are booting out of (as well as setting which bank to
+ boot out of).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit caf72ff329759b4da71352ab098537c7698c0e9f
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Tue Jul 21 10:45:49 2009 +0200
+
+ Refresh LZMA-lib to v4.65
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+
+commit 70ebf31633f372a24505e47846b2628e8435ea37
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 17 23:35:29 2009 +0200
+
+ AT91: factor out ROUND() macro
+
+ A large number of boards (all AT91 based) duplicated the ROUND()
+ macro in their board specific config files. Add the definition to
+ include/common.h and clean up the board config files.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 89188a62333c0841a7166783d2ebdd39d7044eb2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 15 08:54:50 2009 -0500
+
+ 85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
+
+ We have always mapped at least 16M in the kernel and we have seen cases
+ with new kernel features that a kernel image needs more than 8M of
+ memory.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d4abc757c26c531293f5bbc4262ade44a317eec9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Jul 20 19:02:21 2009 -0500
+
+ Move api_examples to examples/api
+
+ Also add a rule to remove demo.bin which was previously leftover
+ after a "make clean"
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit af1d7d984a23a0faa1f436ebfeb55c876b1a99e1
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Jul 21 06:37:28 2009 +0200
+
+ 83xx, kmeter: fix compile error
+
+ CONFIG_SYS_MALLOC_LEN is defined in the board config, and
+ the keymile-common.h, which collects common options used
+ by all keymile-boards. This results in a compile error
+ when compiling the kmeter1 board. So remove this define
+ in the board config file.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 39df00d9aecfb465b9eec9af593f9b763fb5209a
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Jul 9 12:04:26 2009 +0200
+
+ i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2c
+
+ This patch adds the possibility to call a board specific
+ i2c bus reset routine for the fsl_i2c bus driver, and adds
+ this option for the keymile kmeter1 board.
+
+ The deblock sequence for this board is implemented and
+ tested in the following way:
+
+ CR = 0x20 (release SDA and SCL pin)
+ CR = 0xa0 (start read)
+ dummy read
+ dummy read
+ if 2. dummy read == 0x00
+ 3. dummy read
+
+ CR = 0x80 (SDA and SCL now 1 SR = 0x86)
+ CR = 0x00 (Modul reset SR=0x81)
+ CR = 0x80 (SDA and SCL = 1, SR = 0x81)
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 1bc1538613d66cef3cbce680fc8d7c3561a0fbd0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 10 11:03:19 2009 -0500
+
+ Move examples/ to examples/standalone
+
+ The current files in examples are all standalone application examples,
+ so put them in their own subdirectory for organizational purposes
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b220c64d86f7c705a183302c3b50076d7e5d876c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 10 11:03:15 2009 -0500
+
+ Move architecture specific config.mk files into subdirs
+
+ This cleans up U-Boot's toplevel directory a bit and makes the
+ architecture 'config.mk' file naming and location similar to board
+ and cpu 'config.mk' files
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 082becd0d546399637fa94fdf9f1730a0f7bf348
+Author: Po-Yu Chuang <ratbert@faraday-tech.com>
+Date: Fri Jul 10 18:25:34 2009 +0800
+
+ Add "tags" to .gitignore file.
+
+ Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit dc71b248ef0d5e12b19f33c6efb873e31df91fa9
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Jul 9 12:04:18 2009 +0200
+
+ powerpc: updates for the keymile boards
+
+ - CONFIG_SYS_MAX_I2C_BUS changed to 1
+ We use only one I2C hardwarecontroller on this boards, so
+ change the CONFIG_SYS_MAX_I2C_BUS to 1.
+ - common: dont print errormsg if second IVM Block lacks.
+ - 82xx, mgcoge: fix double mtdpart entry in environment
+ - 82xx, mgcoge: activate on second Flash the second bank.
+ - common: CONFIG_ENV_SIZE 0x4000 for all keymile boards
+ - common: Change malloc size to 1MByte for all Keymile boards
+ We need a bigger malloc area for the environment support (128k)
+ on some Keymile boards (kmeter1) and the upcoming UBI support.
+ Change it to 1MB for all Keymile boards to be on the save side.
+ Also define CONFIG_SYS_64BIT_VSPRINTF which is needed for
+ UBI/UBIFS support.
+ - Add UBI support to all Keymile boards
+ - change manner of writing "/localbus/ranges" node
+ instead of writting the complete "/localbus/ranges" node
+ before booting Linux, only update the ranges entries
+ which gets dynamical detected (size of flashes).
+ This is needed, because keymile adds in the DTS
+ "/localbus/ranges" node entries, which u-boot must
+ not overwrite/delete.
+ - kmeter, mgcoge: define 2 seperate regions needed for the Intel P30 chips
+ The Intel P30 chip has 2 non-identical chips on
+ one die, so we need to define 2 seperate regions
+ that are scanned by physmap_of independantly.
+ - kmeter1: Add MTD concat support to Keymile boards
+ - 82xx, mgcoge: add "unlock=yes" to default environment
+ - added CONFIG_MTD_DEVICE to get in sync with mainline code
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f14d81050a9e0fa57aedb1bc746c60a07c1ad67f
+Author: galak <galak@ducky.am.freescale.net>
+Date: Tue Jul 7 15:53:21 2009 -0500
+
+ fsl_sata: Fix compiler warnings shown by gcc-4.4
+
+ Update fsl_sata to use common structures instead of casting
+ back and forth between the fsl specific ones and the common ones
+ (which are identical).
+
+ fsl_sata.c: In function 'scan_sata':
+ fsl_sata.c:550: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:549: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:548: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:545: note: initialized from here
+ fsl_sata.c:592: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:590: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:588: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:586: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:579: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ ...
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 20938e54a207472a090f04f20f30c9e32b14137e
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Tue Jul 7 15:58:51 2009 +0200
+
+ Add unaligned.h for arm
+
+ This patch adds unaligned.h for ARM (needed to build with LZO
+ compression). The file is taken from the linux kernel, but includes
+ u-boot headers instead.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 433ea8abd6adfae3138dd4ce238237a037e1e537
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Jul 19 19:17:42 2009 -0500
+
+ Remove last remanants of unused CONFIG_I2C_CMD_TREE
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit f6ca3b70949790ab5438d6c9a592216cc3616110
+Author: Andrzej Wolski <awolski@poczta.fm>
+Date: Fri Jul 17 22:26:54 2009 +0200
+
+ ubi: help message correction
+
+ Fix incorrect information about size units and correct typo.
+
+ Signed-off-by: Andrzej Wolski <awolski@poczta.fm>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 22f2017c31bc682e9b15612a5c2580ab5b84418e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Jul 19 19:17:42 2009 -0500
+
+ Remove last remanants of unused CONFIG_I2C_CMD_TREE
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit f99a292aa6083057f5db8283d2ce4a2be22b8856
+Author: Andrzej Wolski <awolski@poczta.fm>
+Date: Fri Jul 17 22:26:54 2009 +0200
+
+ ubi: help message correction
+
+ Fix incorrect information about size units and correct typo.
+
+ Signed-off-by: Andrzej Wolski <awolski@poczta.fm>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b86b85e2611d57d834795a92453431a1a340c3c9
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Jun 29 17:53:16 2009 +0400
+
+ mmc: set bus width to 1 and clock to minimum early during initialization
+
+ We need to switch back to 1-bit before initialization or SD 2.0 cards
+ will fail to send SCR if we've switched to 4-bit already.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit cff80f2cd12bf9767509b5334ecfc90cd7de5502
+Author: Shinya Kuribayashi <skuribay@pobox.com>
+Date: Sat Jun 20 19:14:33 2009 +0900
+
+ config.mk: Remove unused HPATH
+
+ This variable is not unused anywhere.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit a781de12700e2cb3d3011fc83b47f7dd8cc3c154
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Wed Jun 17 16:20:14 2009 +0200
+
+ digsy mtc: Enable command line history.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 37566090766d61beef70c62986b90749920255d8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 2 19:23:25 2009 -0400
+
+ compiler.h: unify system ifdef cruft here
+
+ Shove a lot of the HOSTCC and related #ifdef checking crap into the new
+ compiler.h header so that we can keep all other headers nice and clean.
+
+ Also introduce custom uswap functions so we don't have to rely on the non
+ standard implementations that a host may (or may not in the case of OS X)
+ provide. This allows mkimage to finally build cleanly on an OS X system.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2a2ed845c085eb093b69fa6382fcf7534bb1f4b0
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Jun 15 11:50:40 2009 -0500
+
+ common: fix 'dummy' is used uninitialized in this function warning
+
+ fix this gcc 4.4 warning:
+
+ xyzModem.c: In function 'xyzModem_stream_open':
+ xyzModem.c:564: warning: 'dummy' is used uninitialized in this function
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1ea6bcd8590b3ff9fe2bfbb0eb29a3b0edaa9460
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 23:33:14 2009 -0400
+
+ push CROSS_COMPILE out to $(ARCH)_config.mk
+
+ Each arch should handle setting a proper default CROSS_COMPILE value in
+ their own config.mk file rather than having to maintain a large ugly list
+ in the Makefile. By using conditional assignment, we don't have to worry
+ about the variable already being set (env/cmdline/etc...).
+
+ The common config.mk file takes care of exporting CROSS_COMPILE already,
+ and while a few variables (toolchain ones) utilize CROSS_COMPILE before
+ including the arch config.mk, they do so with deferred assignment.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 60a3f404acbf8238a3138fe1f80a6bac75da4582
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jun 13 12:55:37 2009 +0200
+
+ malloc.h: protect it against multiple include
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7640f41988a456a0b1f05263d2e2dc5cd7d93984
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 19 19:37:24 2009 +0200
+
+ Fix boards broken after removal of legacy NAND and DoC support
+
+ Commit 2419169f removed support for legacy NAND and disk on chip but
+ missed to update the code for a few boards. This patch fixes the
+ resulting build issues.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1a4664b53aaf23687b52d64b94be06a9aa260b86
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 19 19:32:37 2009 +0200
+
+ cmd_flash.c: fix fix compile error for boards with DataFlash
+
+ Commit 5669ed45 ("cmd_flash.c: fix warning: unused variable
+ 'addr_first'/'addr_last'") changed the #ifdef logic areound the
+ declaration of these variables and missed a combination of settings
+ of HAS_DATAFLASH with SYS_NO_FLASH; this patch fixes this.
+
+ Also spotted by Alessandro Rubini <rubini@gnudd.com>
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 341245a28830d3261c41b09d958eeea7bb93587a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 19 12:05:15 2009 +0200
+
+ pcm030: fix out-of-tree building
+
+ Commit 0a87dd90 that was supposed to fix out-of-tree building for the
+ pcm030 board was unfortunately incomplete.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8bf29b59fce8cc381114929082202d800e313ad5
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Tue Jul 7 13:58:51 2009 +0200
+
+ Add unaligned.h for arm
+
+ This patch adds unaligned.h for ARM (needed to build with LZO
+ compression). The file is taken from the linux kernel, but includes
+ u-boot headers instead.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit e405afab1dda66c9df3733f6b779d72fc36a0162
+Author: Kazuaki Ichinohe <kazuichi@fsi.co.jp>
+Date: Fri Jun 12 18:10:12 2009 +0900
+
+ Canyonlands SATA harddisk driver
+
+ This patch adds a SATA harddisk driver for the canyonlands.
+ This patch is kernel driver's porting.
+ This patch corresponded to not cmd_scsi but cmd_sata.
+ This patch divided an unused member with ifndef __U_BOOT__ in the structure.
+
+ [environment variable, boot script]
+ setenv bootargs root=/dev/sda7 rw
+ setenv bootargs ${bootargs} console=ttyS0,115200
+ ext2load sata 0:2 0x400000 /canyonlands/uImage
+ ext2load sata 0:2 0x800000 /canyonlands/canyonlands.dtb
+ fdt addr 0x800000 0x4000
+ bootm 0x400000 - 0x800000
+
+ If you drive SATA-2 disk on Canyonlands, you must change parts from
+ PI2PCIE212 to PI2PCIE2212 on U25. We confirmed to boot by using
+ following disks:
+
+ 1.Vendor: Fujitsu Type: MHW2040BS
+ 2.Vendor: Fujitsu Type: MHW2060BK
+ 3.Vendor: HAGIWARA SYS-COM:HFD25S-032GT
+ 4.Vendor: WesternDigital Type: WD3200BJKT (CONFIG_LBA48 required)
+ 5.Vendor: WesternDigital Type: WD3200BEVT (CONFIG_LBA48 required)
+ 6.Vendor: Hitachi Type: HTS543232L9A300 (CONFIG_LBA48 required)
+ 7.Vendor: Seagate Type: ST31000333AS (CONFIG_LBA48 required)
+ 8.Vendor: Transcend Type: TS32GSSD25S-M
+ 9.Vendor: MTRON Type: MSD-SATA1525-016
+
+ Signed-off-by: Kazuaki Ichinohe <kazuichi at fsi.co.jp>
+
+commit 52a0e2dee90c17e39634de814b16b96061cfb472
+Author: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+Date: Wed Jun 10 19:09:40 2009 +0200
+
+ Add support for the Tundra TSI148 VME-bridge
+
+ From: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+ This patch adds support for the Tundra TSI148 VME-bridge. It's used on
+ the upcoming esd VME8349 board.
+
+ Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8d1fea2c4041e665c96944e3f6fcffbde55db34b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 16 19:05:30 2009 -0400
+
+ Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDR
+
+ MAC addresses should not be hardcoded in boards to avoid random link level
+ conflicts.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit baf357050353aee30c04f3f4b868426cb54468ca
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jul 10 10:42:06 2009 -0400
+
+ Blackfin: bf533-stamp: back down SCLK a bit
+
+ While the 1.0 and 1.2 spin of the bf533-stamp boards can handle the higher
+ SCLK speeds just fine, the 1.1 spin cannot due to the bugs introduced with
+ the shortened SDRAM traces. So lower the SCLK speed down to a value that
+ all three can handle.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 490fe7349102012c48730f6fc14ef36c8d155068
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 9 20:56:56 2009 -0400
+
+ Blackfin: split cpu COBJS into multilines
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 909878fd3fda056d19b8b51a5cc51cb1c0b563d1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 9 01:15:05 2009 -0400
+
+ Blackfin: add os log functions
+
+ Part of the mini Blackfin ABI with operating systems is that they can use
+ 0x4f0-0x4f8 to pass log buffers to/from bootloaders. So add support to
+ U-Boot for reading the log buffer.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9993e196da707a0a1cd4584f1fcef12382c1c144
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Sat Jul 18 18:42:13 2009 -0500
+
+ mpc83xx: convert all remaining boards over to 83XX_GENERIC_PCI
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d39041fcadb1231430201d298c31f6be03d654f7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 19 01:15:52 2009 +0200
+
+ PATI board: fix compiler warnings
+
+ Fix these:
+ pati.c: In function 'checkboard':
+ pati.c:358: warning: pointer targets in passing argument 2 of 'getenv_r' differ in signedness
+ ../common/flash.c: In function 'write_word':
+ ../common/flash.c:824: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ cmd_pati.c: In function 'do_pati':
+ cmd_pati.c:279: warning: 'value' may be used uninitialized in this function
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 28c345042eafc550a34b9f52431bd4a22af6ac25
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 16 12:14:56 2009 +0200
+
+ mpl: printing current stdio devices cleanup
+
+ Currently the mpl boards duplicate the code to print the current
+ devices from common/console.c; use stdio_print_current_devices()
+ instead
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+ Edited commit message.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7e3be7cf3bb344f717b6ec3d47a081269ea67ead
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 16 12:14:55 2009 +0200
+
+ console: unify printing current devices
+
+ Create stdio_print_current_devices() for this purpose
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5669ed4557edf2714203aa8625c9fcd5a753b338
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 23:18:14 2009 +0200
+
+ cmd_flash.c: fix warning: unused variable 'addr_first'/'addr_last'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6bb6e6c75ec4ef496f00f7f530e549d3e073c5de
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Tue Jun 30 15:04:13 2009 -0500
+
+ OMAP3 Fix compiler warning for v7_flush_dcache_all
+
+ On build of omap3 targets in MAKEALL, the *.ERR files have
+
+ cpu.c: In function 'cleanup_before_linux':
+ cpu.c:64: warning: implicit declaration of function 'v7_flush_dcache_all'
+ cpu.c:64: warning: implicit declaration of function 'get_device_type
+
+ The functions v7_flush_dcache_all and get_device_type are declared
+ in include/asm-arm/arch-omap3/sys_proto.h, so use this file to
+ declare the functions.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit dba107b967332fc8a35867f4d58038626c968800
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 22:09:38 2009 +0200
+
+ ARM: make split_by_variant.sh output more useful
+
+ The board/armltd/integrator/split_by_variant.sh script used to print
+ "Configuring for integrator*p board..." no matter which board name
+ was being compiled. This made it difficult to match MAKEALL output to
+ board names. This patch fixes this.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2eb99ca8029b44c988d5f6312f97e68d3b9cb2bd
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 21:52:24 2009 +0200
+
+ NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
+
+ Commit 8d2effea added a warning for configurations that use NAND
+ without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
+ failed to fix the affected boards.
+
+ This patch covers the non-PPC boards that were missed in the previous
+ patch (commit 170c1972).
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7024aa14df2981b4e65c6189909da9aadb1c22da
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 20:46:38 2009 +0200
+
+ at91cap9adk: fix #ifdef/#endif pairing
+
+ The #ifdef/#endif pairing in this file was obviously messed up.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4abc5bffea244589fa1097e4c899a63efc609c8e
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Thu Jul 16 20:58:01 2009 +0530
+
+ Marvell MV88F6281GTW_GE Board support
+
+ This is Marvell's 88F6281_A0 based custom board developed
+ for wireless access point product
+
+ This patch is tested for-
+ 1. Boot from DRAM/SPI flash/NFS
+ 2. File transfer using tftp and loadb
+ 3. SPI flash read/write/erase
+ 4. Booting Linux kernel and RFS from SPI flash
+ 5. Boot from USB supported
+
+ Reviewed-by: Ronen Shitrit <rshitrit@marvell.com>
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 55dd4ba5413b14e8ee24058c89ac5c05376c331c
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Thu Jul 16 20:58:00 2009 +0530
+
+ Marvell Sheevaplug Board support
+
+ Reference:
+ http://plugcomputer.org/
+ http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support
+
+ This patch is tested for-
+ 1. Boot from DRAM/NAND flash
+ 2. File transfer using tftp
+ 3. NAND flash read/write/erase
+ 4. Linux kernel and RFS Boot from NAND
+ 5. Enabled USB PHY init for kernel need
+ 6. Boot from USB supported
+
+ Note: to boot Kirkwood kernel with USB support,
+ you should add "usb start" in the boot sequence
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 0a87dd90a75d034301496285026fbd8106c7c6d5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 18:00:25 2009 +0200
+
+ pcm030: fix out-of-tree building
+
+ Commit c9969947, which added support for the pcm030 board
+ (aka phyCORE-MPC5200B-tiny), broke out-of-tree building.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9ff59601c71e800b9d0dfde22fa70d12c71c12b4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 16:36:11 2009 +0200
+
+ MPC837XERDB: fix warning: "CONFIG_SYS_MONITOR_LEN" redefined
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2b5243fc24a724e83409c0b70caa1a3180e997ae
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 16:13:18 2009 +0200
+
+ 8xxx: fix warning: implicit declaration of function 'uec_standard_init'
+
+ Commit 8e55258f created function uec_standard_init() to initialize
+ all UEC interfaces for 83xx and 85xx but failed to provide a
+ prototype for it.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5b54df2674fdad5e7d316484c67efc68e79f3f0d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 15:46:02 2009 +0200
+
+ MIP405T: fix compile problem
+
+ The "stdio/device: rework function naming convention" patch
+ (commit 52cb4d4f) broke the MIP405T board; this patch fixes it.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 170c19725ecd3a0e2e517dfd49979ca8822edec0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 15:32:10 2009 +0200
+
+ NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
+
+ Commit 8d2effea added a warning for configurations that use NAND
+ without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
+ failed to fix the affected boards.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6e897a661fb9968ce354165a12cce82e4b889e04
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 15:05:44 2009 +0200
+
+ CPCI750: fix compile problem
+
+ Commit bc0d3296 removed ppc_error_no.h from Marvell boards
+ but forgot to update board/esd/cpci750/mv_eth.h
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6aee3048348f1b19ab89156da98bfa4f7babf24b
+Author: Alessandro Rubini <rubini-list@gnudd.com>
+Date: Fri Jul 17 14:42:11 2009 +0200
+
+ cmd_i2c: bugfix: add missing brace
+
+ The sub-command parser missed a brace, so "return 0;" is always
+ taken and no error message is diplayed if you say "i2c scan"
+ instead of "i2c probe", for example.
+
+ Proper brace is added. Also, a misleading and unneeded else
+ is removed.
+
+ Signed-off-by: Alessandro Rubini <rubini@gnudd.com.it>
+
+commit 52cb4d4fb3487313f5a72ea740f527a4aefaa365
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 16 12:14:54 2009 +0200
+
+ stdio/device: rework function naming convention
+
+ So far the console API uses the following naming convention:
+
+ ======Extract======
+ typedef struct device_t;
+
+ int device_register (device_t * dev);
+ int devices_init (void);
+ int device_deregister(char *devname);
+ struct list_head* device_get_list(void);
+ device_t* device_get_by_name(char* name);
+ device_t* device_clone(device_t *dev);
+ =======
+
+ which is too generic and confusing.
+
+ Instead of using device_XX and device_t we change this
+ into stdio_XX and stdio_dev
+
+ This will also allow to add later a generic device mechanism in order
+ to have support for multiple devices and driver instances.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+ Edited commit message.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f732a7598fa36d48241df20b1a1f4cdbf09f75ee
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Jul 15 00:01:08 2009 -0500
+
+ ppc: Fix compile error for boards with CONFIG_DDR_ECC
+
+ A bug was introduced by commit e94e460c6e8741f42dab6d8dd4b596ba5d9d79ae
+ which affected non-MPC83xx/85xx/86xx ppc boards which had CONFIG_DDR_ECC
+ defined and resulted in errors such as:
+
+ Configuring for canyonlands board...
+ fsl_dma.c:50:2: error: #error "Freescale DMA engine not supported on your
+ processor"
+ make[1]: *** No rule to make target `.depend', needed by `libdma.a'. Stop.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 18e067de9b6ed087fa60496e64887f0b7458dbaa
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Thu Jul 16 20:57:59 2009 +0530
+
+ include/config_cmd_default.h cleanup
+
+ arranged configurations in alphabetical order
+ CONFIG_CMD_FLASH moved under ifndef CONFIG_SYS_NO_FLASH
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 569460ebf14b87bd8fdb2352bde95d35ee96e13b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 21:35:22 2009 -0400
+
+ sata: namespace curr_device variable
+
+ The curr_device variable really should be namespaced with a "sata_" prefix
+ since it is only used by the sata code. It also avoids random conflicts
+ with other pieces of code (like cmd_mmc):
+ common/libcommon.a(cmd_sata.o):(.data.curr_device+0x0):
+ multiple definition of `curr_device'
+ common/libcommon.a(cmd_mmc.o):(.data.curr_device+0x0): first defined here
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 02e22c2de1ce2312f2636fa473a60c8d8f18d8aa
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 21:35:21 2009 -0400
+
+ cmd_mmc: make curr_device static
+
+ The curr_device variable isn't used outside of cmd_mmc, so mark it static
+ to avoid conflicts with other pieces of code (like sata which also exports
+ a curr_device). Otherwise we end up with stuff like:
+ common/libcommon.a(cmd_sata.o):(.data.curr_device+0x0):
+ multiple definition of `curr_device'
+ common/libcommon.a(cmd_mmc.o):(.data.curr_device+0x0): first defined here
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2d8d2adde3fce1152e4ad9f47238f07e70793c53
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 21:35:16 2009 -0400
+
+ envcrc: add missing dependencies on env storage
+
+ When the envcrc building was made conditional, it missed a bunch of env
+ storage types, so add all currently supported types.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2419169f5749d7af501b3b77a5336d1d535320de
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Jul 16 19:08:04 2009 -0500
+
+ Remove legacy NAND and disk on chip references from boards.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 12e9043c7ed961b60df865f45d9a3c74d6a38199
+Author: Shinya Kuribayashi <skuribay@pobox.com>
+Date: Sat Jun 20 19:10:14 2009 +0900
+
+ config.mk: Remove $(PCI_CLOCK) reference
+
+ The following commit introduced $(PCI_CLOCK) reference so that
+ we could tweak `PCI_66M' definition via an environment variable.
+
+ > commit f046ccd15c8bc9613bfd72916b761a127d36e5c6
+ > Author: Eran Liberty <liberty@freescale.com>
+ > Date: Thu Jul 28 10:08:46 2005 -0500
+ >
+ > * Patch by Eran Liberty
+ > Add support for the Freescale MPC8349ADS board.
+
+ But I suggest a removal of it for the following reasons:
+
+ * In 2006, MPC8349ADS was merged into MPC8349EMDS port,
+ and it seems that MPC8349EMDS port is PCI_66M free.
+
+ * OTOH, PCI_66M is used by MPC832XEMDS an MPC8360EMDS ports,
+ but they don't need $(PCI_CLOCK) environment variable at all.
+ PCI_66M is automatically configured via $(BOARD)_config names
+ with the help of $(findstring _66_,$@).
+
+ * Unfortunately $(PCI_CLOCK) has been undocumented anywhere,
+ so only a few people know the existence of it these days.
+
+ * Keep config.mk independent from $(BOARD) as much as possible.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3db75d9c11d37cc1d28bebd91b19f4e548b68155
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 23 21:42:36 2009 +0200
+
+ fix: missing autoconfig.mk from general Makefile
+
+ At the first run of make we generate the autoconf.mk and
+ autoconf.mk.dep if not already the case and we currently include only
+ to .dep
+
+ In order to use these autogenerated values we need to include it also
+ even if it's included in config.mk but it's done before their
+ generation
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1ca298ced07327749b54321815f76fcddb2f9479
+Author: Matthias Weisser <matthias.weisser@graf-syteco.de>
+Date: Thu Jul 9 16:07:30 2009 +0200
+
+ Added support for splash screen positioning
+
+ This patch adds support splash image positioning by adding an
+ additional variable "splashpos" to the environment. Please see
+ README for details.
+
+ Signed-off-by: Matthias Weisser <matthias.weisser@graf-syteco.de>
+ Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 9d173e0233493113c9b1aa81bd2208d0057ab9db
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Tue Jul 7 13:11:36 2009 +0200
+
+ video: mb862xx: replace printf with puts
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit cce99b2a7dd80683d61360aee56a6ece344950b2
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Tue Jul 7 13:27:07 2009 +0200
+
+ video: mb862xx: use macros instead of magic numbers
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit e86528671ece6d5c1162656a37fc68a8e0bf67f8
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Tue Jul 7 13:24:08 2009 +0200
+
+ video: mb862xx: fix coding style and remove dead code
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 292ed489dba8cc97b458579003a8001cd4703cd8
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Jun 30 12:03:50 2009 +0200
+
+ microblaze: Remove ignored return type for __arch__swab16 function
+
+ This change remove compilation warnings.
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit e2776587c0eac131954ae100fda89cc3e7ed8b57
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Jun 30 12:02:45 2009 +0200
+
+ microblaze: Removed unused variables
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit be33b046b549ad88c204c209508cd7657232ffbd
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Apr 1 15:02:13 2009 -0500
+
+ Remove legacy NAND and disk on chip code.
+
+ Legacy NAND had been scheduled for removal. Any boards that use this
+ were already not building in the previous release due to an #error.
+
+ The disk on chip code in common/cmd_doc.c relies on legacy NAND,
+ and it has also been removed. There is newer disk on chip code
+ in drivers/mtd/nand; someone with access to hardware and sufficient
+ time and motivation can try to get that working, but for now disk
+ on chip is not supported.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit fbdaafaee71e2c7f2c31b3582ab6d8679efee8d3
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 4 16:40:36 2009 +0200
+
+ nand: Change NAND_MAX_OOBSIZE to 218 as needed for some 4k page devices
+
+ This is needed for the MPC512x NAND driver (fsl_nfc_nand.c) which already
+ defines such a 4k plus 218 bytes ECC layout.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit f2f376ab956c17d4a0c42a993133ca25cdc87278
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 16 15:13:04 2009 +0200
+
+ nand: ndfc: Remove unnecessary #ifdef's
+
+ Now that the 4xx NAND driver ndfc is moved to the common NAND driver
+ directory we don't need this #ifdef's anymore.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 12582ac771b0bf3852817c3bfa4be326522a0665
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 16 15:12:48 2009 +0200
+
+ nand/ppc4xx: Move PPC4xx NAND driver to common NAND driver directory
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 3ebf70db5452d3d47c316ddef09f40e76553bcba
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Tue Jul 14 13:51:10 2009 +0300
+
+ nand: fixed failed reads on corrected ECC errors in nand_util.c
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Paulraj, Sandeep <s-paulraj@ti.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit ed727d394c5ab139033719772dc95dc25cfa14f7
+Author: David Brownell <david-b@pacbell.net>
+Date: Mon Jul 13 16:29:04 2009 -0700
+
+ Typo fix: use CONFIG_SOC_DM644X, not CONFIG_SOC_DM646.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 937076f84c5064f0a79105fce352ac7cf7b33643
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Sat Jul 11 16:49:55 2009 +0900
+
+ MTD: OneNAND: Increase the environment size to 4KiB
+
+ Also use mtd operation instead of onenand functions
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit bfadb17f69c256196620c32164775f063a59c34f
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jun 10 00:25:38 2009 +0400
+
+ mpc83xx: MPC837xEMDS: Use hwconfig instead of pci_external_arbiter variable
+
+ Since we have simple hwconfig interface now, we don't need
+ pci_external_arbiter variable any longer.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b8b71ffbc35fde6905e65ffdbf4e4b87efc26b7e
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jun 10 00:25:36 2009 +0400
+
+ mpc83xx: MPC8315ERDB: Use hwconfig for board type selection
+
+ This patch simply converts the board to the hwconfig infrastructure.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c78c678354c8321737aa07e86831ff14176f4ed5
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jun 10 00:25:31 2009 +0400
+
+ mpc83xx: MPC837XEMDS: Fixup eSDHC nodes in device tree
+
+ fdt_fixup_esdhc() will either disable or enable eSDHC nodes, and
+ also will fixup clock-frequency property.
+
+ Plus, since DR USB and eSDHC are mutually exclusive, we should
+ only configure the eSDHC if asked through hwconfig.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c9646ed758804fa1fa6c1425369a4eee5d618b1d
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jun 10 00:25:30 2009 +0400
+
+ mpc83xx: MPC837XERDB: Add support for FSL eSDHC
+
+ This patch adds support for eSDHC on MPC837XERDB boards. The WP
+ switch doesn't seem to work on RDB boards though, the WP pin is
+ always asserted (can see the pin state when it's in GPIO mode).
+
+ FSL DR USB and FSL eSDHC are mutually exclusive because of pins
+ multiplexing, so user should specify 'esdhc' or 'dr_usb' options
+ in the hwconfig environment variable to choose between the
+ devices.
+
+ p.s.
+ Now we're very close to a monitor len limit (196 bytes left using
+ gcc-4.2.0), so also increase the monitor len by one sector (64 KB).
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b33433a63fe08c9e723ea15a7c7c7143bf527c6d
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jun 10 00:25:29 2009 +0400
+
+ fsl_esdhc: Add device tree fixups
+
+ This patch implements fdt_fixup_esdhc() function that is used to fixup
+ the device tree.
+
+ The function adds status = "disabled" propery if esdhc pins muxed away,
+ otherwise it fixups clock-frequency for esdhc nodes.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 93f9dcf9e8b8182e97aeb7965c687176cbd0b933
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jun 10 00:25:27 2009 +0400
+
+ Add simple hwconfig infrastructure
+
+ This patch implements simple hwconfig infrastructure: an
+ interface for software knobs to control a hardware.
+
+ This is very simple implementation, i.e. it is implemented
+ via `hwconfig' environment variable. Later we could write
+ some "hwconfig <enable|disable|list>" commands, ncurses
+ interface for Award BIOS-like interface, and frame-buffer
+ interface for AMI GUI[1] BIOS-like interface with mouse
+ support[2].
+
+ Current implementation details/limitations:
+
+ 1. Doesn't support options dependencies and mutual exclusion.
+ We can implement this by integrating apt-get[3] into the
+ u-boot. But I didn't bother yet.
+
+ 2. Since we don't implement hwconfig command, i.e. we're working
+ with the environement directly, there is no way to tell that
+ toggling a particular option will need a reboot to take
+ an effect. So, for now it's advised to always reboot the
+ target after modifying hwconfig variable.
+
+ 3. We support hwconfig options with arguments. For example,
+
+ set hwconfig dr_usb:mode=peripheral,phy_type=ulpi
+
+ That means:
+ - dr_usb - enable Dual-Role USB controller;
+ - dr_usb:mode=peripheral - USB in Function mode;
+ - dr_usb:phy_type=ulpi - USB should work with ULPI PHYs;
+
+ The purpose of this simple implementation is to define some
+ internal API and then we can continue improving user experience
+ by adding more mature interface, like hwconfig command with
+ bells and whistles. Or not adding, if we feel that current
+ interface fits its needs.
+
+ [1] http://en.wikipedia.org/wiki/American_Megatrends
+ [2] Regarding ncurses and GUI with mouse support -- I'm just
+ kidding.
+ [3] The comment regarding apt-get is also a joke, meaning that
+ dependency tracking could be non-trivial. For example, for
+ enabling HW feature X we may need to disable Y, and turn Z
+ into reduced mode (like RMII-only interface for ethernet,
+ no MII).
+
+ It's quite trivial to implement simple cases though.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6c3fef28b9fff0d7f3fa4c51c3ee0ae8c2a3b043
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Wed Jul 15 20:42:59 2009 -0400
+
+ Improve U-Boot Porting Guide in the README
+
+ Update for...
+ * BDI2000 -> BDI3000 (BDI2000 is obsolete).
+ * Add a line to read the doc/README.* files
+ * Fix coding standard violations
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9578718c1b085cac73017d834001bc5cb0b2f73f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jul 14 16:00:24 2009 -0500
+
+ mtd: cfi - if defined, use MAX_FLASH_BANKS_DETECT for static declarations
+
+ a.k.a cfi_mtd.c does as cfi_flash.c does. This also prevents
+ the TQM834x build from doing a:
+
+ cfi_mtd.c:36: error: variably modified 'cfi_mtd_info' at file scope
+ cfi_mtd.c:37: error: variably modified 'cfi_mtd_names' at file scope
+
+ using gcc 4.4.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4a9932a4364b548773bc131bf85e24a2ec15f2b0
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jul 7 18:04:21 2009 -0500
+
+ mpc83xx: increase MONITOR_LEN to offset growing pains
+
+ Saving the environment leads to overwriting u-boot itself,
+ bricking boards. Increase u-boot's image size so the environment
+ base address doesn't end up overlapping u-boot text.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c31e13260bcd048a94412a47b004386ea6112acf
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Tue Jun 30 15:48:41 2009 +0300
+
+ usb: mpx8349itx: added support of loading images from USB storage (MPH/DR)
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d89e1c36891de793a20a929282acc0fc7b98feac
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Tue Jun 30 15:48:40 2009 +0300
+
+ usb: mpc834x: added support of the MPH USB controller in addition to the DR one
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d9ac3d5a17ecef0beb70073018925e011b11684e
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Jun 15 11:51:47 2009 -0500
+
+ mpc83xx: set 64BIT_VSPRINTF for boards using nand_util
+
+ When enabling NAND support for a board, one must also define
+ CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c
+ for correct output.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Cc: Dave Liu <daveliu@freescale.com>
+ Cc: Ron Madrid <ron_madrid@sbcglobal.net>
+ Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 052c08916532d1d9c2f69eb9229709c7b2fc1f02
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Wed Jul 8 07:41:24 2009 +0000
+
+ ColdFire: Update bootargs
+
+ Add a bootargs for M53017EVB and update bootargs
+ for M54451EVB
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 6e8d58d36691520f8da74cd948661d28d5a5dc66
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Tue Jun 30 14:30:19 2009 +0000
+
+ Command for accessing serial flash update
+
+ Change strtoul number base of argv 3 from 0 to 16
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit ee0a8462466dd284968536eb57c6eef4be0d6aad
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Tue Jun 30 14:18:29 2009 +0000
+
+ ColdFire: Add DSPI support for MCF5227x and MCF5445x
+
+ Remove individual CPU specific DSPI driver.
+ Add required feature for the common DSPI driver in cpu_init and
+ in platform configuration file.
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit dec61c7851baa72151ef1d3657e7bb3b68907d48
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Tue Jun 30 14:09:47 2009 +0000
+
+ Coldfire: Consolidate DSPI driver
+
+ Unify both MCF5227x and MCF5445x DSPI driver in CPU to
+ driver/spi folder for common use.
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 11d88b26a68bd4bf98b1c962fde6257a50978231
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Fri Jun 12 13:03:34 2009 +0000
+
+ ColdFire: Remove compiler warning messages
+
+ Remove unused variables and printf type mismatch in
+ lib_m68k/board.c
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 4567c7bff2503fb1a7c738ff9b9f0bd00d274d9a
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Fri Jun 12 11:31:31 2009 +0000
+
+ ColdFire: Fix M53017EVB flash size
+
+ Increase the flash size from 8MB to 16MB
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit bf9a521529e484b15e8fdb583a607cf7945d2f6b
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Fri Jun 12 11:29:00 2009 +0000
+
+ ColdFire: Add M5208EVB and MCF520x CPU support
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 709b384b6493d9726dce20663ebe31bf7cab2925
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Thu Jun 11 15:39:57 2009 +0000
+
+ ColdFire: Update for M54451EVB
+
+ Update serial boot DRAM's Internal RAM, vector table and DRAM in
+ start.S, serial flash's read status command over SPI and NOR
+ flash.
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit bbf6bbffcaf694c03504c661e58fbd1aefe5bf64
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Thu Jun 11 12:50:05 2009 +0000
+
+ ColdFire: Update configuration file to use flash buffer write
+
+ Update M52277EVB, M53017EVB and M54455EVB platform configuration
+ file to use flash buffer write
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 7d4450a9773673052fcd7fdf0a4a88c089126ac1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:53 2009 +0200
+
+ mpc5121ads: add JFFS2 and MTDPARTS support; adjust flash map
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1f1f82f3de1660f398bf42bfd709b9859582ce5e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:52 2009 +0200
+
+ aria: add JFFS2 and MTDPARTS support; adjust flash map
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a6d6d46a4fef876455e11b45ed699c0fb3bd1ca1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:51 2009 +0200
+
+ aria: enable NAND flash support
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 13946925e850db5351982acb691d51716fc754e2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:50 2009 +0200
+
+ MPC512x: fix typo in comment listing the NAND driver name
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 2ca6f74d09653f8041b52cafd0d650fdc2a56c51
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:49 2009 +0200
+
+ mecp5123: cleanup - remove dead code
+
+ Remove dead code that was obviously a left-over from copy & paste.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 25671c8672f2d7b39555416a6b7a6b7b39b810bf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:48 2009 +0200
+
+ aria: adjust memory controller initialization
+
+ Needed for Rev. 2 silicon at 400 MHz
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7629f1c06b6dea36bbc7bf70820b824e9b6d2227
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:47 2009 +0200
+
+ MPC512x: factor out common code
+
+ Now that we have 3 boards for the MPC512x it turns out that they all
+ use the very same fixed_sdram() code.
+
+ This patch factors out this common code into cpu/mpc512x/fixed_sdram.c
+ and adds a new header file, include/asm-ppc/mpc512x.h, with some
+ macros, inline functions and prototype definitions specific to MPC512x
+ systems.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 0549353a6ba5aa03420c0962b9072e9cf1fa49d9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:46 2009 +0200
+
+ mecp5123: fix build error
+
+ The mecp5123 board did not compile because the MSCAN Clock Control
+ Registers were missing; these got added, but as an array instead
+ of 4 individual registers. Adapt the code so it builds.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit a9905db5d29a56aedd7db5bcb56b0385873aa6a3
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:45 2009 +0200
+
+ MPC512x: Add MSCAN1...4 Clock Control Registers
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit f5489c4200b37c9a1d6dbde116f5adc0539610de
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:44 2009 +0200
+
+ MPC512x: enabling NAND support requires CONFIG_SYS_64BIT_VSPRINTF
+
+ When enabling NAND support for a board, one must also define
+ CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c
+ for correct output.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit b4db4a7638ef90cf0aacf7b954d9bf3043dda780
+Author: Po-Yu Chuang <ratbert@faraday-tech.com>
+Date: Fri Jul 10 18:03:57 2009 +0800
+
+ issue write command to base for JEDEC flash
+
+ For JEDEC flash, we should issue word programming command relative to
+ base address rather than sector base address. Original source makes
+ SST Flash fails to program sectors which are not on the 0x10000 boundaries.
+
+ e.g.
+ SST39LF040 uses addr1=0x5555 and addr2=0x2AAA, however, each sector
+ is 0x1000 bytes.
+
+ Thus, if we issue command to "sector base (0x41000) + offset(0x5555)",
+ it sends to 0x46555 and the chip fails to recognize that address.
+
+ This patch is tested with SST39LF040.
+
+ Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 986922714ffd21ad39f48522d285fffc7aed56b1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 2 11:53:50 2009 +0200
+
+ versatile: update config and merge to cfi flash driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Peter Pearse <peter.pearse@arm.com>
+ Cc: Catalin Marinas <catalin.marinas@arm.com>
+
+commit d6e8ed832b25d5db4fdd3fb91e73028e494dcd6e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 2 11:53:49 2009 +0200
+
+ versatile: specify the board type on the prompt
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Peter Pearse <peter.pearse@arm.com>
+ Cc: Catalin Marinas <catalin.marinas@arm.com>
+
+commit 5ccc2d99d61c81805348b0cd9f79731b271f7daf
+Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+Date: Thu Jun 25 17:04:15 2009 +0200
+
+ at91: Introduction of at91sam9g10 SOC.
+
+ AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
+ faster clock speed: 266/133MHz.
+
+ Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+
+commit 22ee647380c42f44528f99b7c1b423725e542102
+Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+Date: Thu Jul 9 10:16:29 2009 +0200
+
+ at91: Introduction of at91sam9g45 SOC.
+
+ AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
+ It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of
+ peripherals.
+
+ The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES.
+ On the board you can find 2 USART, USB high speed,
+ a 480*272 LG lcd, ethernet, gpio/joystick/buttons.
+
+ Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+
+commit c33c5990cec7ced9ef1ef148debbca34adafa12b
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Tue Jun 23 17:30:05 2009 +0200
+
+ pxa: fix CKEN_B register bits
+
+ The current defition for CKEN_B register bits is nonsense. Adding 32 to
+ the shifted value is equal to '| (1 << 5)', and this bit is marked
+ 'reserved' in the PXA docs.
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+
+commit bd876be46f28b5fc2896537f6d01353f332789f7
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Tue Jun 23 17:30:04 2009 +0200
+
+ pxa: add clock for system bus 2 arbiter
+
+ This clock is needed for systems using the USB2 device unit or the 2d
+ graphics accelerator.
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+
+commit b016000a95514c08cab50e1cba00b019c0801bc4
+Author: Grazvydas Ignotas <notasas@gmail.com>
+Date: Wed Jul 8 00:30:01 2009 +0300
+
+ OMAP3 pandora: Fix CKE1 MUX setting to allow self-refresh
+
+ Pandora is using both SDRC CSes. The MUX setting is needed
+ for the second CS clock signal to allow the 2 RAM parts to
+ be put in self-refresh correctly.
+
+ Based on similar patch for beagle and overo by
+ Jean Pihet and Steve Sakoman.
+
+commit 8672c288703f3c51c829851c8fe6608c7869faaa
+Author: Grazvydas Ignotas <notasas@gmail.com>
+Date: Wed Jul 8 00:30:00 2009 +0300
+
+ OMAP3 pandora: setup pulls for various GPIOs
+
+ Set pullups or pulldowns for GPIOs which need them.
+ Disable them for others, which have external pulls.
+ Also make disabled pull setting consistent (some pins had
+ type set to "up" even if pull type selection was disabled).
+
+commit 5ff78122f229946862a3f67a2f50a329e8e1bcf5
+Author: Grazvydas Ignotas <notasas@gmail.com>
+Date: Wed Jul 8 00:29:59 2009 +0300
+
+ OMAP3 pandora: setup pin mux for pins used on rev3 boards
+
+ Setup pin mux for GPIO pins connected on rev3 or later
+ boards. Also change NUB2 IRQ pin. This should not affect
+ older boards because they don't have any nubs (analog
+ controllers) attached to them.
+
+commit 67c97c346b27c586a7263564f7afff6d1f8d8d0a
+Author: Grazvydas Ignotas <notasas@gmail.com>
+Date: Wed Jul 8 00:29:58 2009 +0300
+
+ OMAP3 pandora: pin mux cleanup
+
+ Remove configuration of not unused pins, effectively
+ leaving them in safe mode.
+
+commit b996165f5a1623a055c03b22d64d6d5da81835d0
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Jul 6 15:50:47 2009 +0530
+
+ arm: Kirkwood: bugfix: UART1 bar correction
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 50243e3e7a96a96c5418ce6c90b7252d26fdd5b0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Jul 7 15:48:58 2009 -0500
+
+ usb: Fix compiler warning with gcc4.4
+
+ ehci-hcd.c: In function 'ehci_submit_root':
+ ehci-hcd.c:719: warning: value computed is not used
+ ehci-hcd.c:748: warning: value computed is not used
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 04366d070a1a3f7affddf15aaaea87bcf44cdbb0
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Jul 8 11:42:19 2009 +0900
+
+ sh: Update pci config for Renesas r7780mp board
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 74d9c16a681aa24bb4125191fe39dc7c75cde56a
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Jun 25 16:31:26 2009 +0900
+
+ sh: Add support ESPT-GIGA borad
+
+ ESPT-Giga is SH7763-based reference board.
+ Board support is relatively sparse, presently supporting serial,
+ gigabit ethernet, USB host, and MTD.
+
+ More information (in Japanese) available at:
+ http://www.cente.jp/product/cente_hard/ESPT-Giga.html
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit dae4e0148a1146a5610025ae4b445e841410b659
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Fri Jul 3 16:06:37 2009 +0200
+
+ Add ESD PCI vendor ID
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+
+commit 876b3cef537aab2cba8c19505db2876f6057f818
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Jun 22 18:01:41 2009 -0500
+
+ api_examples/Makefile: General cleanup
+
+ * Remove symlinking of files located outside api_examples/
+
+ * Auto generate dependencies for files located outside api_examples/
+
+ * Update names of variables to be similar to those in tools/Makefile
+
+ * Fix out of tree build error
+ Dependencies are calculated for all files in the SRCS variable.
+ Previously, the SRCS variable contained files which were symlinked
+ into the api_examples/ directory. These symlinked files did not exist
+ when dependencies were calculated when building out of tree. This
+ resulted in errors such as:
+ make[1]: *** No rule to make target `/work/wd/tmp-ppc/api_examples/.depend', needed by `_depend'. Stop.
+ make[1]: Leaving directory `/home/wd/git/u-boot/work/api_examples'
+ make: *** [depend] Error 2
+
+ Since symlinked source files are no longer used, this bug no longer
+ exists.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 522f6f02adb93194e337016fe2e4e53c58d5d5ea
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Jun 22 18:01:40 2009 -0500
+
+ api_examples/Makefile: Get rid of unnecessary intermediate LIB target
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 117d0ab5e6f3b3dd48fc346df4919555a78afd39
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Jun 22 18:01:39 2009 -0500
+
+ api_examples/Makefile: Combine ELF and BIN targets
+
+ Combining the two rules cleans up the Makefile a bit
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 644cb38108b8dc22e0ef3cf5f404fe310d1995f8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Jun 22 18:01:38 2009 -0500
+
+ api_examples/Makefile: Split up variable declarations
+
+ This cleans up the Makefile a bit and simplifies future changes
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 890d242facc4079ed21e979ced2e8c6d6974f6d3
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Jun 19 14:10:52 2009 -0500
+
+ remove _IO_BASE and KSEG1ADDR from board configuration files
+
+ The KSEG1ADDR macro used to be necessary for the RTL8139 Ethernet
+ driver, but the code that used that macro was removed over a year
+ ago, so board configuration files no longer need to define it.
+
+ The _IO_BASE macro is also automatically defined to 0 if it isn't
+ already set, so there's no need to define that macro either in the
+ board configuration files.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c9969947a4687de90e2bb58e76842b491aa0e0b9
+Author: Jon Smirl <jonsmirl@gmail.com>
+Date: Sun Jun 14 18:21:28 2009 -0400
+
+ board support patch for phyCORE-MPC5200B-tiny
+
+ Add support for the Phytec phyCORE-MPC5200B-tiny.
+ Code originally from Pengutronix.de.
+ Created CONFIG_SYS_ATA_CS_ON_TIMER01 define for when IDE CS is on
+ Timer 0/1
+
+ Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 7bd49ad12cc36a4de6995ddabbc65ffa1aa1933d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jun 15 13:37:20 2009 -0400
+
+ kallsyms: fix escaping of NUL char in strings
+
+ The current kallsyms code is using \\0 to escape the backslash in the awk
+ code, but the shell too needs escaping. This way we make sure gcc is
+ passed the \0. Then gcc itself will consume this as an octal, so we have
+ to use 000 so gcc will create the final NUL.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ed540f07b8ad86909704e9806c1762462cb4995a
+Author: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
+Date: Fri Jun 26 10:18:49 2009 -0400
+
+ Blackfin: cm-bf561: add example settings for EXT-BF5xx-USB-ETH2 add-on
+
+ The cm-bf561 module can easily hook up to the EXT-BF5xx-USB-ETH2 extender
+ board, so add a simple example of how to do that in the board config.
+
+ Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f8bf54b4081c3c3d518830df0017a23ec672a841
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jun 25 19:40:28 2009 -0400
+
+ Blackfin: blackstamp: update spi flash settings
+
+ The latest blackstamp boards can only run the SPI flash at 15MHz before
+ they start to crap out, so lower the max speeds accordingly. The new SPI
+ flash also has different sector requirements, so update the environment
+ sizes as well.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 286070ddc8339666c09bd7912e960b850a8a0318
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:31:52 2008 -0400
+
+ Blackfin: add cache_dump commands
+
+ A few debug-type commands used to dump the raw icache/dcache data. Useful
+ when trying to track down cache-related bugs.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 632e9b671efb0a6c900499f7a49fe5b63292b5fc
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Wed Jul 8 15:31:57 2009 +0200
+
+ ppc4xx: Set default PCI device ID for 405EP boards
+
+ Current code only sets the PCI vendor id to 0x1014 and
+ leaved device id to 0x0000.
+
+ Ths patch ....
+ a) uses the correct PCI_VENDOR_ID_IBM macro for this
+ b) sets the default device ID as stated in the UM to 0x0156
+ by using PCI_DEVICE_ID_IBM_405GP for this.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 123f102ec093fba6967066acdf9beb637df2e2d1
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Wed Jul 8 13:43:55 2009 +0200
+
+ ppc4xx: Move 405EP pci code from cpu_init_f() to __pci_pre_init()
+
+ This patch moves some basic PCI initialisation from the 4xx cpu_init_f()
+ to cpu/ppc4xx/4xx_pci.c.
+
+ The original cpu_init_f() function enabled the 405EP's internal arbiter
+ in all situations. Also the HCE bit in cpc0_pci is always set.
+ The first is not really wanted for PCI adapter designs and the latter
+ is a general bug for PCI adapter U-Boots. Because it enables
+ PCI configuration by the system CPU even when the PCI configuration has
+ not been setup by the 405EP. The one and only correct place is
+ in pci_405gp_init() (see "Set HCE bit" comment).
+
+ So for compatibility reasons the arbiter is still enabled in any case,
+ but from weak pci_pre_init() so that it can be replaced by board specific
+ code.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c71103f9dc66dfcce8ad6df942364043bf27ade8
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Wed Jul 8 13:43:23 2009 +0200
+
+ ppc4xx: Make is_pci_host() available for all 440 and 405 CPUs
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1d8937a469bfeb55ca1f6d89a4e7cd2dfee3cf17
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Jun 29 20:56:43 2009 +0530
+
+ usb: add Marvell Kirkwood ehci host controller driver
+
+ This driver is tested on Sheevaplug platform
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit db7b43e4681f6f93c336132708157a8a0cca1f8b
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Wed Jun 24 10:08:40 2009 +0530
+
+ mpc83xx: USB: fix: access of ehci struct elements
+
+ It fixes the access to the 'ehci' struct elements for mpc83xx which
+ should have been taken care of in 4ef01010aa4799c759d75e67007fdd3a38c88c8a
+ Sorry about that.
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 08066152735417fc55a5c9de2cec0714c529e4f3
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Fri Jun 19 17:56:00 2009 +0530
+
+ mpc8xxx: USB: fix: access of ehci struct elements
+
+ This patch fixes the access to the 'ehci' struct elements which should
+ have been taken care off in 4ef01010aa4799c759d75e67007fdd3a38c88c8a
+ Sorry about that.
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit c3a012ce65818beb274195cd47f31ed80d0fbaa5
+Author: Bryan Wu <bryan.wu@analog.com>
+Date: Tue Jun 16 05:26:27 2009 -0400
+
+ usb: musb: add timeout via CONFIG_MUSB_TIMEOUT
+
+ Signed-off-by: Bryan Wu <bryan.wu@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 7984967a9405672db1581402d2c2cfae268d1a67
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jun 16 05:26:25 2009 -0400
+
+ usb: musb: drop old musb read/write prototypes
+
+ These functions are no longer defined, so remove their prototypes.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 4e04f16020115ab5ccf53158e100de58bcaf29bd
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Jun 15 11:50:07 2009 -0500
+
+ usb: fix CONFIG_SYS_MPC83xx_USB_ADDR not defined error
+
+ fix a stray CONFIG_MPC83XX that escaped commit
+ 0f898604945af4543c1525fc33b6bae621a3b805.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit bc0d3296f1780b50e6b9630aee5eb368f2afb6cb
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Jun 30 23:47:30 2009 +1000
+
+ asm-generic: Consolidate errno.h to asm-generic/errno.h
+
+ This patch use blackfin errno.h implementation which
+ correspond Linux kernel one.
+
+ MIPS implemetation is different that's why I keep it.
+
+ I removed ppc_error_no.h from Marvell boards which
+ was the same too.
+
+ I have got ack from ppc40x, blackfin, arm, coldfire and avr custodians.
+
+ Acked-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 2896b5851f0430bf16529376a4193630e966c788
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Tue Jul 7 16:01:02 2009 +0200
+
+ Command improvements for ubifs
+
+ Check that an argument is passed to ubifsmount and that addresses and
+ sizes are actually numbers for ubifsload. Also improve the instructions
+ a bit.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 25c8f4005979ab2d190713ba341d96a5fa905cdb
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Tue Jul 7 16:59:46 2009 +0200
+
+ Handle VID header offset in ubi part command
+
+ The VID header offset is sometimes needed to initialize the UBI
+ partition. This patch adds it (optionally) to the command line
+ for the ubi part command.
+
+ (Lines have been properly wrapped since last version)
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Acked-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3672cd5c3b53d219d33345eebad4e25ad5bf6d52
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 9 09:56:16 2009 +0200
+
+ MAINTAINERS: fix sorting, remove duplicates.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit efbf14e9a2394a154b12643d4a011994b5096b5a
+Author: Heiko Schocher <heiko.schocher@invitel.hu>
+Date: Wed Dec 10 08:27:01 2008 +0100
+
+ all platforms: make show_boot_progress() work again
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 205a0988d8fd778c60746c34c2f17dbd2b7cd0d2
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Jun 29 15:25:18 2009 +0530
+
+ nand: Add Marvell Kirkwood NAND driver
+
+ This patch adds a NAND driver for the Marvell Kirkwood SoC's
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 0580e48f53f972783e56fcedadb9ce6e5b0b6f32
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Mon Jul 6 16:27:33 2009 +0200
+
+ ppc4xx: Make pll_write global
+
+ This patch makes pll_write on PPC405EP boards
+ global and callable from C code.
+
+ pll_write can be used to dynamically modify the PLB:PCI divider
+ as it is required for 33/66 MHz pci adapters based on the 405EP.
+
+ board_early_init_f() is a good place to do that (check M66EN signal
+ and call pll_write() when it is required).
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 20b3c4b528606d51799aed5e4c71783720cd2b72
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 6 11:44:33 2009 +0200
+
+ ppc4xx: Remove compilation warning "pci_async_enabled defined but not used"
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d0a1364f91c80d29daff6b27a7904a50cdc00b35
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Fri Jul 3 16:06:06 2009 +0200
+
+ ppc4xx: Implement is_pci_host() for 405 CPUs
+
+ This patch implements the is_pci_host() function in a similiar way
+ as it is used on 440 targets.
+
+ The former path with CONFIG_PCI_HOST == PCI_HOST_AUTO does not
+ build on 405EP targets because checking the PCI arbiter is different.
+ So putting the fixed code into a separate function makes the code
+ more readable.
+
+ Also using is_pci_host() on 405 brings 405 and 440 PCI code
+ a little bit closer.
+
+ In preparation for an upcoming 405EP based PMC module I made this
+ function weak so that it can be overwritten from board specific code.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 04ddae915f295dee301f15c32100533a48e3b433
+Author: Alessio Centazzo <centazzo@gmail.com>
+Date: Wed Jul 1 22:20:51 2009 -0700
+
+ ppc4xx: Fixed PPC4xx debug compilation error in uic.c
+
+ This patch fixes a debug compilation error for PPC4xx platforms, all
+ other architectures are not affected by this change. The 'handler'
+ pointer was undefined. The fix is exercised and has effect only if
+ DEBUG is defined.
+
+ Signed-off-by: Alessio Centazzo acpatin@yahoo.com
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 48e2b535a0dd3a7b77b674130934a24f9de6f48d
+Author: Felix Radensky <felix@embedded-sol.com>
+Date: Wed Jul 1 11:37:46 2009 +0300
+
+ 4xx: Fix compilation warnings and MQ registers dump in SPD DDR2 code
+
+ This patch fixes printf format string compilation warnings in several
+ debug statements. It also fixes the dump of DDR controller MQ registers
+ found on some 44x and 46x platforms. The current register dump code
+ uses incorrect DCRs to access these registers.
+
+ Signed-off-by: Felix Radensky <felix@embedded-sol.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 26d37f0061ad05e5c383c910f00e6006f3c89a3a
+Author: Felix Radensky <felix@embedded-sol.com>
+Date: Mon Jun 22 15:30:42 2009 +0300
+
+ ppc4xx: Fix FDT EBC mappings on Canyonlands
+
+ This patch fixes 2 problems with FDT EBC mappings on Canyonlands.
+ First, NAND EBC mapping was missing, making Linux NAND driver
+ unusable on this board. Second, NOR remapping code assumed that
+ NOR is always on CS0, however when booting from NAND NOR is on CS3.
+
+ Signed-off-by: Felix Radensky <felix@embedded-sol.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit baa9f9ba4345ed6dc5c403871c32e6295316ea52
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Jun 16 22:29:15 2009 +0900
+
+ sh: Revised the build with newest compiler
+
+ The check of data became severe from newest gcc.
+ This patch checked in gcc-4.2 and 4.3 .
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit be45c632568ba76343c1453b3951ad793f482fd5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jun 4 12:06:48 2009 +0200
+
+ sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 8dd29c87ba370072a8464b8cc19e0a1e6e0497b4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jun 4 12:06:47 2009 +0200
+
+ sh3/sh4: fix CONFIG_SYS_HZ to 1000
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit add380f51f34ed1e2678c2abac8d53c91d652f26
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jun 4 12:06:46 2009 +0200
+
+ sh: introduce clock framework
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3931a375de2c381d9ff5ec2767b2da9f62a41aef
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jun 4 12:06:45 2009 +0200
+
+ sh: unify linker script
+
+ all sh boards use the same cpu linker script so move it to cpu/$(CPU)
+
+ that could be overwrite in following order
+ SOC
+ BOARD
+ via the corresponding config.mk
+
+ tested on r2dplus
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 236aad875817771eb1f25ed32784b3cd7760b2e6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jun 4 12:06:44 2009 +0200
+
+ sh: make the linker scripts more generic
+
+ currently we need to sync the linker script enty and TEXT_BASE manualy
+ and the reloc_dst is based on it
+
+ instead provide it now from the ldflags
+
+ tested on r2dplus
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ce29817212792113cd2d67a9767049a2e262c406
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jun 4 12:06:43 2009 +0200
+
+ sh7785lcr: fix out of tree build
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 2e8a6f551cba550e9220dca4d8504066203b1f74
+Author: HeungJun Kim <riverful.kim@gmail.com>
+Date: Tue Jun 30 14:42:22 2009 +0900
+
+ env_onenand: change env_address type from unsigned long to loff_t
+
+ If use the onenand boot, the env_relocate_spec() calls mtd->read(),
+ and the type of the argument #2 of mtd->read() was changed to loff_t.
+ But, the "env_addr" type is still unsigned long, thus this patch change
+ the type from unsigned long to loff_t.
+
+ Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 66372fe2ab11cdeb0e841ad9eb6ba79769db4909
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Thu Jun 18 18:23:27 2009 +0800
+
+ fsl_elbc_nand: redirect the pointer of bbt pattern to RAM
+
+ The bbt descriptors contains the pointer to the bbt pattern which
+ are statically initialized memory struct. When relocated to RAM,
+ these pointers will continue point to NOR flash(or L2 SRAM, or
+ other boot device). If the contents of NOR flash changed or L2
+ SRAM disabled, it'll hang the system.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 1dac3a51875967f32641bbc0d26dc382ef02330a
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Jun 24 17:23:49 2009 -0500
+
+ nand_spl: Fix cmd_ctrl usage in nand_boot.c.
+
+ When adding large page NAND support to this file, I had a misunderstanding
+ about the exact semantics of NAND_CTRL_CHANGE (which isn't documented
+ anywhere I can find) -- it is apparently just a hint to drivers,
+ which aren't required to preserve the old value for subsequent
+ non-"change" invocations.
+
+ This change makes nand_boot.c no longer assume this. Note that this
+ happened to work by chance with some NAND drivers, which don't preserve
+ the value, but treat 0 equivalently to NAND_CTRL_ALE.
+
+ I don't have hardware to test this, so any testing is appreciated.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 98713d2663d5d30dde74f48f547114a2bfd9d463
+Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>
+Date: Thu Jun 18 18:41:03 2009 +0100
+
+ Bug-fix in drivers mtd nand Makefile
+
+ The S3C2410 NAND driver source file is included in the makefile instead of
+ the object file.
+
+ Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit b74ab737369bbbe66c15cbe6c0d0b6a351b00c96
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Mon May 18 16:07:22 2009 +0200
+
+ nand_spl: read environment early, when booting from NAND using nand_spl
+
+ Currently, when booting from NAND using nand_spl, in the beginning the default
+ environment is used until later in boot process the dynamic environment is read
+ out. This way environment variables that must be interpreted early, like the
+ baudrate or "silent", cannot be modified dynamically and remain at their
+ default values. Fix this problem by reading out main and redundand (if used)
+ copies of the environment in the nand_spl code.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 378adfcdf4bbd77ee4cbc3276d4733e218308a21
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 16 14:27:40 2009 +0200
+
+ mtd: nand: use loff_t for offset
+
+ nand_util currently uses size_t which is arch dependent and not always a
+ unsigned long. Now use loff_t, as does the linux mtd layer.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8360b66bac9567701027a0087274d0c9b2fe8d6b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun May 24 17:34:33 2009 +0200
+
+ nand/onenand: Fix missing argument checking for "markbad" command
+
+ The "nand markbad" and "onenand markbad" commands did not check if an
+ argument was passed; if this was forgotten, no error was raised but
+ block 0 was marked as bad.
+
+ While fixing this bug, clean up the code a bit and allow to pass more
+ than one block address, thus allowing to mark several blocks as bad
+ in a single command invocation.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit cd84423a09f3a08029fe41c1db96168debd0b51f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon May 25 22:42:28 2009 -0400
+
+ mtd: nand: new base driver for memory mapped nand devices
+
+ The BF537-STAMP Blackfin board had a driver for working with NAND devices
+ that are simply memory mapped. Since there is nothing Blackfin specific
+ about this, generalize the driver a bit so that everyone can leverage it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit d27bc728cf35e7d7996fbd77154335e66615b213
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Mon May 18 16:06:45 2009 +0200
+
+ env_nand: remove unused variable.
+
+ Remove an unused "total" variable in multiple functions.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 154b5484ac7dcbcd0fb5ba388d930b02f87fa302
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Sun May 10 15:43:01 2009 -0700
+
+ davinci_nand chipselect/init cleanup
+
+ Update chipselect handling in davinci_nand.c so that it can
+ handle 2 GByte chips the same way Linux does: as one device,
+ even though it has two halves with independent chip selects.
+ For such chips the "nand info" command reports:
+
+ Device 0: 2x nand0, sector size 128 KiB
+
+ Switch to use the default chipselect function unless the board
+ really needs its own. The logic for the Sonata board moves out
+ of the driver into board-specific code. (Which doesn't affect
+ current build breakage if its NAND support is enabled...)
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 496863b2440dd7cd69a1ad2443a9badd5f8968d1
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sat May 9 12:35:20 2009 -0400
+
+ NAND DaVinci: Update to ALE/CLE Mask values
+
+ All DaVinci SOC's use a CLE mask of 0x10 and an ALE mask of 0x8
+ except the DM646x. This was decided by the design team driving the design.
+ This patch updates the CLE and ALE values for DM646x.
+ Updated patches for DM646x will be sent shortly.
+ This applies to u-boot-nand-flash git
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0c1684437ef810c503df29e8d73f63191aa63862
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Wed Apr 29 09:47:09 2009 -0400
+
+ ARM DaVinci: Changing ALE Mask Value
+
+ The ALE mask used by DaVinci SOCs is wrong. The patch changes the mask value
+ from '0xa' to '0x8'. This is the mask we use for all TI releases.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 6e29ed8e576a6900c5d8dcde36b423ac576894dc
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Tue Apr 28 13:19:53 2009 -0700
+
+ davinci_nand: cleanup II (CONFIG_SYS_DAVINCI_BROKEN_ECC)
+
+ Remove CONFIG_SYS_DAVINCI_BROKEN_ECC option. It's not just nasty;
+ it's also unused by any current boards, and doesn't even match the
+ main U-Boot distributions from TI (which use soft ECC, or 4-bit ECC
+ on newer chips that support it).
+
+ DaVinci GIT kernels since 2.6.24, and mainline Linux since 2.6.30,
+ match non-BROKEN code paths for 1-bit HW ECC. The BROKEN code paths
+ do seem to partially match what MontaVista/TI kernels (4.0/2.6.10,
+ and 5.0/2.6.18) do ... but only for small pages. Large page support
+ is really broken (and it's unclear just what software it was trying
+ to match!), and the ECC layout was making three more bytes available
+ for use by filesystem (or whatever) code.
+
+ Since this option itself seems broken, remove it. Add a comment
+ about the MV/TI compat issue, and the most straightforward way to
+ address it (should someone really need to solve it).
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit fcb774777562bb7bcdc53c608d0e6bae906ce0f6
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Tue Apr 28 13:19:50 2009 -0700
+
+ davinci_nand: cleanup I (minor)
+
+ Minor cleanup for DaVinci NAND code:
+
+ - Use I/O addresses from nand_chip; CONFIG_SYS_NAND_BASE won't
+ be defined when there are multiple chipselect lines in use
+ (as with common 2 GByte chips).
+
+ - Cleanup handling of EMIF control registers
+ * Only need one pointer pointing to them
+ * Remove incorrect and unused struct supersetting them
+
+ - Use the standard waitfunc; we don't need a custom version
+
+ - Partial legacy cleanup:
+ * Don't initialize every board like it's a DM6446 EVM
+ * #ifdef a bit more code for BROKEN_ECC
+
+ Sanity checked with small page NAND on dm355 and dm6446 EVMs;
+ and large page on dm355 EVM (packaged as two devices, not one).
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8e5e9b940cdede0debe528cdd7edccccbb3ebf2a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 7 22:35:02 2009 +0200
+
+ Coding style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d318d0c44d8e91e937c4dad0c5b1d2f6bb9d9fd8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 29 13:30:50 2009 +0200
+
+ UBI: Fix build problem noticed on Apollon (arm/testing repo)
+
+ This patch fixes a build problem noticed on Apollon by using
+ mtd_dev_by_eb() instead of "/" as done in the Linux UBI version.
+ So this brings the U-Boot UBI version more in sync with the Linux
+ version again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2efee52b09657e9353655b9dae9e1d1a67a2abe4
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Jul 6 20:29:15 2009 +0530
+
+ sf: Macronix additional chips supported
+
+ new chips supported:-
+ MX25L1605D, MX25L3205D, MX25L6405D, MX25L12855E
+ out of which MX25L6405D and MX25L12855E tested on Kirkwood platforms
+
+ Modified the Macronix flash support to use 2 bytes of device id instead of 1
+ This was required to support MX25L12855E
+
+ Signed-off-by: Piyush Shah <spiyush@marvell.com>
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit dd54126715b89ed0c43322aa78b0dad306f043b6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jun 19 03:27:28 2009 -0400
+
+ sf: sst: add sst25vf###b ids
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7d907f0ea993b179a197d8db2a36f122bc673c2d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jun 19 03:20:06 2009 -0400
+
+ sf: sst: fix sector size
+
+ Looks like when I was encoding the sector sizes, I forgot to divide by 8
+ (due to the stupid marketing driven process that declares all sizes in
+ useless megabits and not megabytes).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ceb70b466e75ceb1a621b6163f7e31116bfc8094
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jul 5 01:06:06 2009 +0200
+
+ nhk8815: fix MAKEALL
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d08e5ca301b69ab77ecdd34e2b06aee30d6057d1
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sat Jul 4 10:31:24 2009 +0200
+
+ MX31: Add NAND SPL boot support to i.MX31 PDK board.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 78eabb90b793fafe875a7469526d1715fa56cbb4
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Jun 29 20:55:54 2009 +0530
+
+ arm: Kirkwood: arch specific updated for ehci-Kirkwood driver support
+
+ This patch abstracts Kirkwood arch specific changes to support ehci-kirkwood driver
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 095a460b49022e64df76134300643606e3acb4e9
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Mon Jun 29 10:52:37 2009 +0200
+
+ arm nomadik: use 1000 as HZ value and rewrite timer code
+
+ This sets CONFIG_SYS_HZ to 1000 as required, and completely rewrites
+ timer code, which is now both correct and much smaller. Unused
+ functions like udelay_masked() have been removed as no driver uses
+ them, even the ones that are not currently active for this board.
+ mtu.h is copied literally from the kernel sources.
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f7aa59b29a451cc502078a9e4ba32345a4250c05
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Mon Jun 22 09:18:57 2009 +0200
+
+ arm nomadik: allow Nand and OneNand to coexists
+
+ The evaluation kit has both Nand and OneNand, both drivers are there
+ and the two configurations only select a different default for the
+ jffs partition. This adds the OneNand driver and cleans up storage.
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+
+commit fd14c41a861cd38ee2fe3abd61d59b57b4eb23c9
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Mon Jun 22 09:18:47 2009 +0200
+
+ arm nomadik: cleanup reset
+
+ There is only one public release of the Nomadik chip, so the ifdef
+ in reset code as well as a define in the config file are not needed
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+
+commit ee1363f2da3996bafdecdd8f4e48862ebff3f271
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Mon Jun 22 09:18:37 2009 +0200
+
+ arm nomadik: rename board to nhk8815
+
+ This is an error in my side in the initial submission: nobody
+ calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead.
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+
+commit 040f8f63e922bbfb8ba0958bf637f11a917f5c38
+Author: Stefano Babic <sbabic@denx.de>
+Date: Wed Jul 1 20:40:41 2009 +0200
+
+ xscale: add support for the polaris board
+
+ The Polaris board is based on the TrizepsIV module of
+ Keith & Koep (http://www.keith-koep.com).
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 88bd97501314683b87f3f1edcf55b347c041b722
+Author: Stefano Babic <sbabic@denx.de>
+Date: Wed Jul 1 04:33:56 2009 +0200
+
+ xscale: fix USB initialization for Trizepsiv module
+
+ Due to change in the usb_board_init() prototype, the USB for
+ the TrizepsIV was not correctly initialized.
+ Removed dummy print from usb_board_stop().
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 0b785ddd60120cfb74d18e58c56054238219f6db
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Wed Jul 1 20:34:51 2009 +0200
+
+ net: merge bugfix: Marvell Kirkwood gigabit ethernet driver
+
+ This patch looks okay on u-boot-net.git/next branch
+ but when it was merged to u-boot.git/master the last line is missing
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 33b1d3f43a16fbb79004075ce89ae4e618b288a2
+Author: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+Date: Tue Jun 30 21:03:37 2009 +0200
+
+ at91: Add esd gmbh MEESC board support
+
+ This patch adds support for esd gmbh MEESC board.
+ The MEESC is based on an Atmel AT91SAM9263 SoC.
+
+ Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+
+commit 21761540b43c7086c75ee9afb412da1e5ddde2e9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Jun 30 21:03:35 2009 +0200
+
+ ARM: Update mach-types
+
+ update against linux v2.6.30
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 45627fce18139a74e0755124d27376b520db156c
+Author: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+Date: Tue Jun 30 23:03:33 2009 +0200
+
+ at91: Add CAN init function
+
+ To enable CAN init, CONFIG_CAN has to be defined in the board config file
+ and at91_can_hw_init() has to be called in the board specific code.
+
+ CAN is available on AT91SAM9263 and AT91CAP9 SoC.
+
+ Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+
+commit 2e23008e5dbde7fe4c4758bee5a393e1db796cdf
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Tue Jun 30 23:03:31 2009 +0200
+
+ arm: Kirkwood: Correct header define
+
+ Correct define typo (. -> ,)
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+
+commit 8449f287f5c53d59db13c3c512e6bd1750b692d1
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Wed Jul 1 01:07:55 2009 +0200
+
+ MX31: Add basic support for Freescale i.MX31 PDK board.
+
+ Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board).
+
+ This patch assumes that some other program performs the actual
+ NAND boot.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+ Acked-by: Fabio Estevam <fabioestevam@yahoo.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8d460a573e2a2ac4834636903865a0428ad0e629
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Jun 23 00:12:01 2009 +0200
+
+ S3C24x0: extract interrupts from timer
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c8badbe500a752f42049e51042767ee62ea714e0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jun 28 14:14:21 2009 +0200
+
+ dm355/pm9261: add missing CONFIG_NET_MULTI
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 798bf9a9ade1cfbe85a16d180cad720927d8e10a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Jun 23 00:12:01 2009 +0200
+
+ arm920t/interrupts: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 06e758e75c79ce8761866bf8165c443584a20893
+Author: Kim, Heung Jun <riverful@gmail.com>
+Date: Sat Jun 20 11:02:17 2009 +0200
+
+ move L2 cache enable/disable function to cache.c in the omap3 SoC directory
+
+ Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
+ CC: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d583ef5147066d3609de21f3beebbab99a19bad4
+Author: Thomas Lange <thomas@corelatus.se>
+Date: Sat Jun 20 11:02:17 2009 +0200
+
+ ARM DaVinci: EMIF settings
+
+ NAND module should not modify EMIF registers unrelated to CS2
+ that is used for NAND, i.e. do not modify EWAIT config register
+ or registers for other Chip Selects.
+
+ Without this patch, EMIF configurations made in board_init()
+ will be invalidated.
+
+ Signed-off-by: Thomas Lange <thomas@corelatus.se>
+
+commit 2600b8571a26c10c1c43401d7af38e2333cc5381
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jun 20 11:02:17 2009 +0200
+
+ versatile: config coding style cleanup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Peter Pearse <peter.pearse@arm.com>
+
+commit 4efb77d41f9c5d93f0f92dda60e742023fa03c72
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Sat Jun 20 11:01:53 2009 +0200
+
+ arm: Kirkwood: Basic SOCs support
+
+ Kirkwood family controllers are highly integrated SOCs
+ based on Feroceon-88FR131/Sheeva-88SV131/arm926ejs cpu core.
+
+ SOC versions supported:-
+ 1) 88F6281-A0 define CONFIG_KW88F6281_A0
+ 2) 88F6192-A0 define CONFIG_KW88F6192_A0
+
+ Other supported features:-
+ 1) get_random_hex() fucntion
+ 2) PCI Express port initialization
+ 3) NS16550 driver support
+
+ Contributors:
+ Yotam Admon <yotam@marvell.com>
+ Michael Blostein <michaelbl@marvell.com
+
+ Reviewed-by: Ronen Shitrit <rshitrit@marvell.com>
+ Acked-by: Stefan Rose <sr@denx.de>
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 5c3d5817e5e68b828c165c501c215e793dc63aac
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Sat Jun 20 11:01:52 2009 +0200
+
+ arm: generic cache.h for ARM architectures
+
+ This patch is required for Kirkwood SoC support
+ may be used by other ARM architectures
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 9c8c706c92e53433a871a563946c38075d76504d
+Author: Matthias Ludwig <mludwig@ultratronik.de>
+Date: Sat Jun 20 11:01:50 2009 +0200
+
+ OMAP3EVM: fix typo. replace CS6 by CS5, no functionality change
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+
+commit 0aafde1dc76d6d65d6be10bf499ec86d9ffee8b9
+Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+Date: Wed Jun 24 08:32:09 2009 +0200
+
+ at91sam9260/9263: add back up for the rst(reset controller).
+
+ On the boards at91sam9260ek, at91sam9263ek and afed9260, the rstc register was
+ set to 0 after being set to 500 ms for the PHY reset.
+ Do backup the old reset length and restore it after the MACB initialisation.
+
+ Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit afb0b1315c048ce2b1f35f0183b8b118ad0c14e1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jul 3 12:45:44 2009 -0500
+
+ fsl: Fix compiler warnings from gcc-4.4 in sys_eeprom code
+
+ sys_eeprom.c: In function 'do_mac':
+ sys_eeprom.c:323: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ sys_eeprom.c: In function 'mac_read_from_eeprom':
+ sys_eeprom.c:395: warning: dereferencing type-punned pointer will break strict-aliasing rules
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e94e460c6e8741f42dab6d8dd4b596ba5d9d79ae
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:51 2009 -0500
+
+ 83xx: Add support for fsl_dma driver
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Reviewed-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Tested-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9adda5459ca62120c0c50b82b766fe1cf6925bbf
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:50 2009 -0500
+
+ 83xx: Replace CONFIG_ECC_INIT_VIA_DDRC references
+
+ Update 83xx architecture's CONFIG_ECC_INIT_VIA_DDRC references to
+ CONFIG_ECC_INIT_VIA_DDRCONTROLLER, which other Freescale architectures
+ use
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 039594a4301dadceb267db5e8b9c8c78b1bb86b5
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Thu Jul 2 16:15:01 2009 +0530
+
+ 8xxx: Second UART port added for MPC85xx, MPC83xx, MPC86xx processors
+
+ Defining the next two configs allows to switch the serial port from the
+ console using the setenv stdin and stdout
+ 1. #define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */
+ 2. #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 546b1032907df70f2dd0f98f3ad09885a88411e5
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Thu Jul 2 16:14:40 2009 +0530
+
+ 85xx: Adds GPIO registers to MPC85xx Memory Map.
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5da6f806b400372b8a0664f3282c9e83a402eb66
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:26:01 2009 -0500
+
+ 86xx: XPedite5170 board support
+
+ Initial support for Extreme Engineering Solutions XPedite5170 -
+ a MPC8640-based 3U VPX single board computer with a PMC/XMC
+ site.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e66f38da8434425aca8df08d06d9ef41b3478d3b
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Jul 1 16:51:59 2009 -0500
+
+ fsl_ddr: Fix DDR3 calculation of rank density with 8GB or more
+
+ The calculate for rank density in compute_ranksize() for DDR3 used all
+ integers for the expression, so the result was also a 32-bit integer, even
+ though the 'bsize' variable is a u64. Fix the expression to calculate a
+ true 64-bit value.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6af015b86b86d94de7ca1b23a3890bc93a50c2ab
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:49 2009 -0500
+
+ fsl_dma: Make DMA transactions snoopable
+
+ Make DMA transactions snoopable so that CPUs can keep caches up-to-date.
+ This allows dma transactions to be used for operations such as memory
+ copies without any additional cache control operations.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0d595f76bc9c7c8dff5bd31dffed87a840a03c56
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:48 2009 -0500
+
+ fsl_dma: Break out common memory initialization function
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 79f4333ceb059049b3ee560167d6cbaec493695f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:47 2009 -0500
+
+ 8xxx: Move dma_init() call to common code
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 191c7118592cd182f2dc7f46b4f72d9bed0e2c76
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:46 2009 -0500
+
+ fsl_dma: Move dma function prototypes to common header file
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7892f619d40f4196e41e7114c5dfee9fad0f572f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:45 2009 -0500
+
+ 8xxx: Rename dma_xfer() to dmacpy()
+
+ Also update dmacpy()'s argument order to match memcpy's and use
+ phys_addr_t/phy_size_t for address/size arguments
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 484919cf3351212ebf748b9b13ece1ddaf7e7d1c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:44 2009 -0500
+
+ fsl_dma: Fix Channel Start bug in dma_check()
+
+ The Channel Start (CS) bit in the Mode Register (MR) should actually be
+ cleared as the comment in the code suggests. Previously, CS was being
+ set, not cleared.
+
+ Assuming normal operation of the DMA engine, this change shouldn't have
+ any real affect.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 51402ac12be9a0025f16db51fbde7c050a54e5fe
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:43 2009 -0500
+
+ fsl_dma: Add support for arbitrarily large transfers
+
+ Support DMA transfers larger than the DMA controller's limit of
+ (2 ^ 26 - 1) bytes
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a730393a362741c318b21771b8d7b2647e546c3e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:42 2009 -0500
+
+ fsl_dma: Use proper I/O access functions
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9c06071a6077ba95e9d43226156e39567d5d064a
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:41 2009 -0500
+
+ fsl_dma: Add bitfield definitions for common registers
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 017f11f68ef543e866be033bcb7b8058a8a380d8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:40 2009 -0500
+
+ 8xxx: Break out DMA code to a common file
+
+ DMA support is now enabled via the CONFIG_FSL_DMA define instead of the
+ previous CONFIG_DDR_ECC
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6bbced671719518d0e28ff422623cd7ce396cbda
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Mon Jun 29 15:59:10 2009 +0100
+
+ Atmel LCD driver GUARDTIME fix
+
+ This patch allows the guard time parameter to be set in
+ the Atmel LCDC driver.
+
+ By default, the previous value of 1 is used, unless the
+ setting is defined elsewhere.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 29c35182462feea09f322e51913759a53359a3e0
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Tue Jun 30 13:56:23 2009 +0800
+
+ 85xx: Add pci e1000 Ethernet support for P2020 board
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 156984a3611c28093919d3e3c042f722b5548253
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 18 08:39:42 2009 -0500
+
+ 8xxx: Fix PCI bus address setup for 36-bit configs
+
+ We want the outbound PCI memory map to end at the 4G boundary so we
+ can maximize the amount of space available for inbound mappings if
+ we have large amounts of memory.
+
+ This matches the device tree setup in the kernel for the 36-bit physical
+ configs for the platforms that have one (MPC8641 HPCN & MPC8572 DS).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 480f61790565d77432b70b4016b73f2ae27d530f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 18 08:23:01 2009 -0500
+
+ 86xx: Add CPU_TYPE_ENTRY support
+
+ Unify with 83xx and 85xx and use CPU_TYPE_ENTRY. We are going to use
+ this to convey the # of cores and DDR width in the near future so its
+ good to keep in sync.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 98ab14e858bf60306d0aa3f0df5a7a5f88264aff
+Author: Peter Meerwald <pmeerw@pmeerw.net>
+Date: Mon Jun 29 15:48:33 2009 -0400
+
+ Blackfin: TWI/I2C: fix pure writes
+
+ If doing a pure write with register address and data (not a read/write
+ combo transfer), we don't set the initial transfer length properly which
+ ends up causing only the register address to be transferred.
+
+ While we're here, fix the i2c_write() parameter description of the buffer.
+
+ Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5710de45808eb8f1cc34b51dc3e67e2422113249
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Sat May 30 01:13:33 2009 +0530
+
+ spi: Add Marvell Kirkwood SPI driver
+
+ This patch adds a SPI driver for the Marvell Kirkwood SoC's.
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 6bde171a4c4116cee179167cb65335a28f99932d
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Thu Jun 25 19:21:33 2009 +0900
+
+ s3c64xx: move the reset_cpu function
+
+ Because of the reset_cpu is soc specific, should be move to soc
+ And read reset value from SYS_ID register instead of hard code
+ this patch also supports s3c6410
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 576afd4faeba1519bcb8c0083c3e4d45e5643a48
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 17 00:58:37 2009 +0200
+
+ integrator: merge integratorap and integratorcp
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Peter Pearse <peter.pearse@arm.com>
+
+commit 46937b27427688a56bf7f5944a92d962dc43c3fa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 17 00:58:36 2009 +0200
+
+ integratorap/cp: use cfi driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Peter Pearse <peter.pearse@arm.com>
+
+commit de7a01abd8aeb167946f391327e1e0d1e01f90c9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 17 00:58:36 2009 +0200
+
+ integratorap/cp/versatile: remove non used functions
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Peter Pearse <peter.pearse@arm.com>
+
+commit f54851a6e3844b7e01581b5a9681f294118b7529
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 17 00:58:36 2009 +0200
+
+ integratorcp: split timer support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Peter Pearse <peter.pearse@arm.com>
+
+commit 2bcef0723ea11c4e9bfbcfff2a93ec2da520b5f1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 17 00:58:36 2009 +0200
+
+ integratorap: split timer support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Peter Pearse <peter.pearse@arm.com>
+
+commit 86baa085c52a7f3377a88074679c5aca9b9e4d38
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 17 00:58:36 2009 +0200
+
+ integratorap: split pci support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Peter Pearse <peter.pearse@arm.com>
+
+commit 379e9fc0a319b8f6ae16d763590bf023f3afb87c
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Jun 8 04:12:50 2009 +0400
+
+ arm: add support for CONFIG_GENERIC_MMC
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 47d19da4d3f9ac4787abe9dee32406478424be52
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Jun 8 04:12:46 2009 +0400
+
+ serial_mx31: allow it to work with mx27 too and rename to serial_mxc
+
+ UART hardware on i.MX27 is the same as on the i.MX31 so we just
+ need to provide the driver with correct address of the registers.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 1dc4da749dbde27ec862f5b65703e8e4541fbba3
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Jun 8 04:12:45 2009 +0400
+
+ mx27: basic cpu support
+
+ This patch adds generic code to support Freescale's i.MX27 SoCs.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit dd2f6965a6c71f6f711ec98827880152e022c236
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sat Jun 13 20:50:03 2009 +0200
+
+ i.MX31: Create a common device file.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 958f7da7887fea4a2091ae60944d62c1708c2c55
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jun 13 20:50:02 2009 +0200
+
+ ARM: Add macros.h to be used in assembler file.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 40c642bc19b9fa2906e3172487a522fee456340b
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sat Jun 13 20:50:01 2009 +0200
+
+ MX31: Add NAND SPL for i.MX31.
+
+ This patch adds the NAND SPL framework needed to boot i.MX31 boards
+ from NAND.
+
+ It has been tested on a i.MX31 PDK board with large page NAND. Small
+ page NANDs should work as well, but this has not been tested.
+
+ Note: The i.MX31 NFC uses a non-standard layout for large page NANDs,
+ whether this is compatible with a particular setup depends on how
+ the NAND device is programmed by the flash programmer (e.g. JTAG
+ debugger).
+
+ The patch is based on the work by Maxim Artamonov.
+
+ Signed-off-by: Maxim Artamonov <scn1874@yandex.ru>
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit df81238b3e27a791da996a9208402ac8f40b9862
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sat Jun 13 20:50:00 2009 +0200
+
+ ARM1136: Introduce CONFIG_PRELOADER macro.
+
+ Currently CONFIG_ONENAND_IPL is used in a number of #ifdef's
+ in start.S. In preparation for adding support for NAND SPL
+ the macro CONFIG_PRELOADER is introducted and replaces the
+ CONFIG_ONENAND_IPL in start.S.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 8096c51fd4e611ed666dbe77767e81af5d94fc7b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jun 13 12:50:04 2009 +0200
+
+ at91: unify nor boot support
+
+ the lowlevel init sequence is the same so unify it
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1b3b7c640d04df2ba9a9d947117d112a75fee7f4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jun 13 12:48:36 2009 +0200
+
+ at91sam9263ek: add nor flash support
+
+ this will allow you to store use it for the env and to boot directly U-Boot from
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 329492329700812c6df275aa0fda09d609cd0fd4
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Fri Jun 12 21:20:39 2009 +0200
+
+ at91: add support for the PM9261 board of Ronetix GmbH
+
+ The PM9261 board is based on the AT91SAM9261-EK board.
+
+ Here is the page on Ronetix website:
+ http://www.ronetix.at/starter_kit_9261.html
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 01550a2b650fbabc03334f9eadcc6083601a2414
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jun 12 21:20:38 2009 +0200
+
+ pm9263: use macro instead of hardcode value for the lowlevel_init
+
+ optimize a few the RAM init
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7a11c7f9747240dc770954d320569596c0fbcb50
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jun 12 21:20:37 2009 +0200
+
+ pm9263: lowlevel init update
+
+ move PSRAM init to pm9263.c
+ this will allow us after to make the nor lowlevel_init generic
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3e88337b225bf796f6df21d0a7f591530e9d4ce0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jun 15 00:25:19 2009 -0400
+
+ Blackfin: move ALL += u-boot.ldr to blackfin_config.mk
+
+ The way the ALL variable is used allows for config.mk's to add more
+ targets themselves without having to clutter up the top level Makefile.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit afac8b07172d7e4a65f86ce1ec4c783a6165ba1f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 22:29:35 2009 -0400
+
+ Blackfin: fix SPI flash speed define name
+
+ The SPI flash define is named CONFIG_SF_DEFAULT_SPEED, not
+ CONFIG_SF_DEFAULT_HZ, so fix the typos in the Blackfin boards.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9ae55ccf601de7a5b75eb418f3fc3d5eca92c106
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 22:26:31 2009 -0400
+
+ Blackfin: enable -O2 in lib_generic/ for ADI/Bluetechnix boards
+
+ Building the compression code in lib_generic/ with -O2 rather than -Os
+ gives a nice speed boost without too much code size increase.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fea63e2a44f0db51d2e39ee7793e8c6d7f3cf5d4
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 21:23:27 2009 -0400
+
+ Blackfin: bf548-ezkit: bump up monitor size
+
+ The latest version of U-Boot got a bit fatter in the BSS section which
+ caused overflows in the RAM region, so increase the monitor size.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bc43a8d8994c2f0be29e09b13b15da7f79e2c081
+Author: Vivi Li <vivi.li@analog.com>
+Date: Fri Jun 12 10:53:22 2009 +0000
+
+ Blackfin: bf533-stamp/bf537-stamp: fix env settings for SPI flash
+
+ The SPI flash layer is much stricter about sector usage than the eeprom
+ layer we used to use, so update the env settings to better match the
+ sector alignment of the flashes we use.
+
+ Signed-off-by: Vivi Li <vivi.li@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 63cb0f4eb2d3cf15e7a1add19d1289f4ae75816c
+Author: Vivi Li <vivi.li@analog.com>
+Date: Fri Jun 12 10:33:23 2009 +0000
+
+ Blackfin: bump up default JTAG console timeout
+
+ The debug tools that interface with the other side of the JTAG console
+ got much slower when generalizing things, so bump up the default timeout
+ value on the U-Boot side to cope. Hopefully at some point we can improve
+ the debug tools to speed things back up.
+
+ Signed-off-by: Vivi Li <vivi.li@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c11ff779f4e0e0c7edc322e84dd229ad28709595
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jun 1 19:08:33 2009 -0400
+
+ Blackfin: add jtagconsole helper script
+
+ This script is similar to the netconsole script, but instead works with
+ the JTAG console device driver that exists on Blackfin parts.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 60f61e6d7655400bb785a2ef637581679941f6d1
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Sat May 2 21:49:18 2009 +0200
+
+ Convert DM9000 driver for CONFIG_NET_MULTI
+
+ All drivers need to be converted to CONFIG_NET_MULTI.
+ This patch converts the dm9000 driver.
+
+ Signed-off-by: Thomas Smits <ts.smits@gmail.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9131589ada4dda0718604d0a425ca46e52775f6e
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Sun Jun 14 22:33:46 2009 +0530
+
+ net: Add Marvell Kirkwood gigabit ethernet driver
+
+ This patch adds a egiga driver for the Marvell Kirkwood SoC's.
+
+ Contributors:
+ Yotam Admon <yotam@marvell.com>
+ Michael Blostein <michaelbl@marvell.com
+
+ Reviewed-by: Ronen Shitrit <rshitrit@marvell.com>
+ Acked-by: Stefan Rose <sr@denx.de>
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 7835f4b94927ecb5affd99aad62592108db606ad
+Author: s-paulraj@ti.com <s-paulraj@ti.com>
+Date: Tue May 12 11:45:34 2009 -0400
+
+ DaVinci Network Driver Updates
+
+ Different flavours of DaVinci SOC's have differences in their EMAC IP
+ This patch does the following
+ 1) Updates base addresses for DM365
+ 2) Updates MDIO frequencies for DM365 and DM646x
+ 3) Update EMAC wrapper registers for DM365 and DM646x
+
+ Patch applies to u-boot-net git. the EMAC driver itself
+ will be updated shortly to add support for DM365 and DM646x
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 44578bea14e49035331a8f0e000e935e0d830ff4
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Tue May 26 08:29:29 2009 -0400
+
+ Subject: [PATCH] [repost] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter.
+
+ From 584b5fbd4abfc43f920cc1c329633e03816e28be Mon Sep 17 00:00:00 2001
+ From: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Date: Wed, 20 May 2009 18:26:01 -0400
+ Subject: [PATCH] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c9a2aab1512fb2d132670fff9c27656d2eb949cd
+Author: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
+Date: Thu Jun 4 09:39:48 2009 +0200
+
+ A VLAN tagged DHCP request/discover is 4 bytes short
+
+ The problem is that BOOTP_SIZE uses ETHER_HDR_SIZE which is 14 bytes.
+ If sending a VLAN tagged frame (when env variable vlan is set) this
+ should be VLAN_ETHER_HDR_SIZE=18 which is what NetSetEther returns.
+
+ Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6e0d2fc7fe0dcfa2f51ab8931d706940ee364193
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Apr 28 16:39:19 2009 -0700
+
+ Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8453587ef9137daf98b7c9cf4f3b865f4039cea0
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue May 26 00:34:07 2009 -0700
+
+ Switched davinci_emac Ethernet driver to use newer API
+
+ Added CONFIG_NET_MULTI to all Davinci boards
+ Removed all calls to Davinci network driver from board code
+ Added cpu_eth_init() to cpu/arm926ejs/cpu.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8cc13c13f1d154c8fa8fff56cea357ed38af76bf
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Apr 27 23:19:10 2009 -0700
+
+ Initial cleanup of Davinci Ethernet driver
+
+ Removed pointless #ifdefs
+ Moved functions around in file in preparation for switch to newer API
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 09cdd1b9b01450e91786d26ff3c866dc9c8d8d6b
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue May 26 00:17:59 2009 -0700
+
+ Moved Davinci Ethernet driver to drivers/net
+
+ This driver has been renamed davinci_emac.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6f51deb7f298413cfcb0a36d24c97ef7dd69d48f
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Tue May 19 01:40:16 2009 +0530
+
+ Marvell MV88E61XX Switch Driver support
+
+ Chips supported:-
+ 1. 88E6161 6 port gbe swtich with 5 integrated PHYs
+ 2. 88E6165 6 port gbe swtich with 5 integrated PHYs
+ 2. 88E6132 3 port gbe swtich with 2 integrated PHYs
+ Platform specific configuration supported for:-
+ default or router port vlan configuration
+ led_init configuration
+ mdip/n polarity reversal configuration
+
+ Note: This driver is supported and tested against
+ kirkwood egiga interface
+
+ Contributors:
+ Yotam Admon <yotam@marvell.com>
+ Michael Blostein <michaelbl@marvell.com
+
+ Reviewed by: Ronen Shitrit <rshitrit@marvell.com>
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 091dc9f6adaf572b067ae91af92c4e7db33d7903
+Author: Zach LeRoy <zleroy@xes-inc.com>
+Date: Fri May 22 10:26:33 2009 -0500
+
+ tsec: Add support for BCM5482S PHY
+
+ Signed-off-by: Zach LeRoy <zleroy@xes-inc.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9ff67e5e4c719556d57f136a6453f8e4798d85c0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 06:29:07 2009 -0400
+
+ Blackfin: unify u-boot linker scripts
+
+ All the Blackfin linker scripts were duplicated across the board dirs with
+ no difference save from the semi-often used ENV_IS_EMBEDDED option. So
+ unify all of them in the lib_blackfin/ dir and for the few boards that
+ need to embedded the environment directly, add a LDS_BOARD_TEXT define for
+ them to customize via their board config file. This is much simpler than
+ forcing them to duplicate the rest of the linker script.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f52efcae98cbb8a39f1d0535df8d9646a776af9e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri May 29 17:02:37 2009 -0400
+
+ Blackfin: bf518f-ezbrd: enable SST SPI flash driver
+
+ The BF51xF parts have an internal SST SPI flash, so make sure the driver is
+ enabled by default so we can access it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f348ab85f741dc98b2d202c04b5f430eace94925
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 24 17:22:40 2009 -0400
+
+ Blackfin: convert specific pre/post config headers to common method
+
+ The Blackfin port was using asm/blackfin-config-{pre,post}.h to setup
+ common Blackfin board defines. The common method now is to use config.h,
+ so convert blackfin-config-post.h to that. Rename the still Blackfin
+ specific blackfin-config-pre.h to config-pre.h so the naming conventions
+ at least line up.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7c7503ee6cd03c0f3b16e98d33d5aa23b30d65b1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 24 17:11:47 2009 -0400
+
+ Blackfin: enable LZMA for all ADI boards
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0e63dc0679451d48f8b727c543ce48b488f7a33f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Apr 13 05:52:45 2009 -0400
+
+ Blackfin: make default ADI env more flexible
+
+ Allow boards to easily override the root= and default bootcmd, allow
+ people to tweak the file used in default bootcmds at runtime via one env
+ var, and add a stock nandboot command.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0f52b560f19623ec651f9b9b40405d138ec251d3
+Author: Hoan Hoang <hnhoan@i-syst.com>
+Date: Sun Jan 18 22:44:17 2009 -0500
+
+ Blackfin: ibf-dsp561: new board port
+
+ Signed-off-by: Hoan Hoang <hnhoan@i-syst.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3088189a15d219c48fd7e71623ca4daa08b80b59
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 23:28:33 2008 -0400
+
+ Blackfin: blackstamp: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 59ac9729700db1d4446c1a6db3ffe38398b7abb2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 23:22:25 2008 -0400
+
+ Blackfin: bf537-srv1: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d7fdc1410b5fa5ef623b35a283733b6bcee3753b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 23:16:52 2008 -0400
+
+ Blackfin: bf537-minotaur: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cb4b5e874f3c9b882a6f4394bbebbbd91fd01bbf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 23:08:03 2008 -0400
+
+ Blackfin: bf537-pnav: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 59e4be945b6469e31eee721e0bcdccf4940d75ac
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:55:45 2008 -0400
+
+ Blackfin: cm-bf527: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8b219cf07c186cc9d97354cf4b14f24a53d193c5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:54:07 2008 -0400
+
+ Blackfin: cm-bf548: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9417d9a21384279308abe5b4dd8dfd418742484c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:49:28 2008 -0400
+
+ Blackfin: tcm-bf537: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e548321af00e869af7194896576beb9b68457ff7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:45:05 2008 -0400
+
+ Blackfin: cm-bf561: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8a9bab08a6fe93e5f3bf57b90438f1d2a67fad3c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:41:06 2008 -0400
+
+ Blackfin: cm-bf537e: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e82d8a1f028bedb12c4ab88a35a935010d92898c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:36:22 2008 -0400
+
+ Blackfin: cm-bf533: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit dd14af7640f7d48d8e9768eeeb09592e6f94ed38
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Nov 27 16:50:32 2008 -0500
+
+ Blackfin: new spibootldr command
+
+ Newer Blackfin parts can an on-chip ROM that can boot LDRs over SPI flashes,
+ so add a new 'spibootldr' command to take advantage of it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 67c2829b646bb5b859088b36fbc89e971b9c1960
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:42:33 2008 -0400
+
+ Blackfin: support embedding the environment into loader files (LDRs)
+
+ For the most part, the Blackfin processor boots files in the LDR format
+ rather than binary/ELF files. So we want to export the environment as a
+ raw blob to the LDR utility so it can embed it at the right location.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 31f30c9eb60d9ab0bd702e31f66345f99b34bdc6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 11:03:48 2009 -0400
+
+ add %.c->%.i and %.c->%.s rules
+
+ The Linux kernel has some helper rules which allow you to quickly produce
+ some of the intermediary files from C source. Specifically, you can
+ create .i files which is the preprocessed output and you can create .s
+ files which is the assembler output. This is useful when you are trying
+ to track down header/macro expansion errors or inline assembly errors.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6d1ce387874c1060f27656f70151a52c511cd0e3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat May 30 01:02:03 2009 -0400
+
+ make sure toplevel $(SUBDIRS) is always declared
+
+ The $(SUBDIRS) variable is only declared when U-Boot has been configured,
+ but it gets used all the time. In the non-configured case, it is used to
+ generate a helpful error message, but it needs to be set properly for that
+ to occur.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1260233982f7dfbdfd1adee12daa95a0c0e84a43
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Jun 12 11:33:55 2009 +0200
+
+ digsy mtc: Add description to GPIO initial configuration.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 12304871bc7839145f2b4238923e9023616d7399
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Jun 12 11:33:54 2009 +0200
+
+ digsy MTC: Add 'mtc' command.
+
+ New command allows to:
+ o check FW version
+ o set LED status
+ o set digital output status
+ o get digital input status
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit f1f66edfc76f4a9f5b9f63972d90309784a8cae5
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Jun 12 11:33:53 2009 +0200
+
+ digsy MTC: Add SPI support.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 6325b7780dad8be26ba6fc25ef88ba338c50205b
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Jun 12 11:33:52 2009 +0200
+
+ mpc52xx: Add SPI driver.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 5ec5529b82f314ca2cf9c262cdfc985d5fc468a0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 09:33:00 2009 -0400
+
+ allow boards to customize compiler options on a per-file/dir basis
+
+ With our Blackfin boards, we like to build the compression routines with
+ -O2 as our tests show a pretty good size/speed tradeoff. For the rest of
+ U-Boot though, we want to stick with the default -Os as that is mostly
+ control code. So in our case, we would add a line like so to the board
+ specific config.mk file:
+ CFLAGS_lib_generic += -O2
+
+ Now all files under lib_generic/ will have -O2 appended to their build.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6b1f78ae6ad037382ad430b07064105c88f7ac02
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 21:30:39 2009 +0200
+
+ Prepare v2009.06
+
+ Update CHANGELOG, fix minor coding stylke issue. Update Makefile.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c3147c1762f8caf99649051116a2411bdf887c10
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:31:36 2009 +0200
+
+ Revert "SMC911x driver fixed for NFS boot"
+
+ This reverts commit ca9c8a1e10fac01e6a1129f82a7ce18bd818fa43,
+ which causes compile warnings ("large integer implicitly truncated
+ to unsigned type") on all systems that use this driver. The warning
+ results from passing long constants (TX_CFG, RX_CFG) into
+ smc911x_set_mac_csr() which is declared to accept "unsigned
+ character" arguments only.
+
+ Being close to a release, with nobody available to actually test the
+ code or the suggested fixes, it seems better to revert the patch.
+
+commit 388517e4b745b00256c2fa201ce7bccb67b4f245
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri May 22 10:26:37 2009 -0500
+
+ xes: Update Freescale clock code to work with 86xx processors
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 25623937bb81cae788d767e6c59a11c96fc82866
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri May 22 10:26:36 2009 -0500
+
+ xes: Update Freescale DDR code to work with 86xx processors
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit bef3013908bbc68f24084174a3ca86cc2a3eb986
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri May 22 10:26:35 2009 -0500
+
+ xes: Update Freescale PCI code to work with 86xx processors
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6442b71b522face775c1c31bd43121db3b4bf7d6
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri May 22 10:26:32 2009 -0500
+
+ 85xx: Add PORBMSR and PORDEVSR shift defines
+
+ Add defines similar to those already used for the the 86xx architecture.
+ This will ease sharing of PCI code between the 85xx and 86xx
+ architectures.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2f21ce4d546d31289ac49a680f78bcc9a792c6ec
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Thu May 21 12:10:00 2009 -0500
+
+ fsl/85xx, 86xx: Sync up DMA code
+
+ The following changes were made to sync up the DMA code between the 85xx
+ and 86xx architectures which will make it easier to break out common
+ 8xxx DMA code:
+
+ 85xx:
+ - Don't set STRANSINT and SPCIORDER fields in SATR register. These bits
+ only have an affect when the SBPATMU bit is set.
+ - Write 0xffffffff instead of 0xfffffff to clear errors in the DMA
+ status register. We may as well clear all 32 bits of the register...
+
+ 86xx:
+ - Add CONFIG_SYS_MPC86xx_DMA_ADDR define to address DMA registers
+ - Add clearing of errors in the DMA status register when initializing
+ the controller
+ - Clear the channel start bit in the DMA mode register after a transfer
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b1f12650d332eadac1306a772cab6096abee6ddd
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Thu May 21 12:09:59 2009 -0500
+
+ fsl: Create common fsl_dma.h for 85xx and 86xx cpus
+
+ Break out DMA structures for the Freescale MPC85xx and MPC86xx cpus to
+ reduce a large amount of code duplication
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3bd8e532b5de20647aeaff94a1cbf33fb8b897b9
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:41 2009 -0400
+
+ 85xx: Add UEC6 and UEC8 at SGMII mode for MPC8569MDS
+
+ On MPC8569MDS board, UCC6 and UCC8 can be configured to work at SGMII mode via
+ UEM on PB board. Since MPC8569 supports up to 4 Gigabit Ethernet ports, we
+ disable UEC6 and UEC8 by default.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e8efef7c1b457442583a8b9d38d8a5b667661616
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Jun 4 16:12:42 2009 -0400
+
+ drivers/qe: add sgmii support in for UEC driver
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8e55258f144764de8902e9f078a7ad4c6c022c2f
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Jun 4 16:12:41 2009 -0400
+
+ qe: Pass in uec_info struct through uec_initialize
+
+ The uec driver contains code to hard code configuration information for the uec
+ ethernet controllers. This patch creates an array of uec_info structures, which
+ are then parsed by the corresponding driver instance to determine configuration.
+ It also creates function uec_standard_init() to initialize all UEC interfaces
+ for 83xx and 85xx.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9a6110897fc9282ade598bbba70ad72b940436e3
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Jun 4 16:12:40 2009 -0400
+
+ fsl: Update the number of ethxaddr in reading system eeprom
+
+ We support up to 8 mac addresses in system eeprom, so we define the macro
+ MAX_NUM_PORTS to limit the mac_count to 8, and update the number of ethxaddr
+ according to mac_count.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f82107f637f167a77803c0933f9b24741a91c711
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:37 2009 -0400
+
+ 85xx: Add RMII support for MPC8569MDS
+
+ This patch supports UCC working at RMII mode on PIB board, fixup fdt blob to
+ support rmii in kernel. It also changes the name of enable_mpc8569mds_qe_mdio to
+ enalbe_mpc8569mds_qe_uec which is more accurate.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 750098d33bc362ac4263863e92da158cf011063f
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:36 2009 -0400
+
+ 85xx: Add UEC3 and UEC4 support for MPC8569MDS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4e7b25e4fe777f525e426cbd58c3a3976c564f2e
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:35 2009 -0400
+
+ drivers/qe: Add more SNUM number for QE
+
+ Some QE chips like 8569 need more SNUM numbers for supporting 4 UECs in RGMII-
+ 1000 mode.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Acked-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7211fbfa18f3061858696150ee6e9e093d9eceae
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu May 21 15:34:14 2009 -0400
+
+ drivers/qe: Change QE RISC ALLOCATION to support 4 RISCs
+
+ Also define the QE_RISC_ALLOCATION_RISCs to MACROs instead of using enum, and
+ define MAX_QE_RISC for QE based silicons.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Acked-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b3d7f20f43a0f8d11c65e2f92153b5512b11580c
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:29 2009 -0400
+
+ 85xx: Add QE clk support
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Acked-by: Timur Tabi <Timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 71b358cc26792889bbac35054d8e89d59b3fabc4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed May 20 01:11:33 2009 -0500
+
+ 85xx: Added MPC8535/E identifiers
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 22419d77976bbd0df9fcf45513f1b96bd73e50d1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu May 21 08:36:43 2009 -0500
+
+ 85xx: Always attempt ethernet device tree fixup
+
+ Its reasonable that we may have ethernet devices but dont have drivers
+ or support enabled for them in u-boot and want the device tree fixed up.
+ Unconditionally calling the ethernet fixup is fine since if we dont have
+ ethernet nodes that match (or aliases) we will not attempt to do
+ anything.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Timur Tabi <timur@freescale.com>
+
+commit 52d6ad5ecfb22938441c8e3e62935fbd7b0f0920
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu May 21 15:32:13 2009 -0400
+
+ drivers/qe: Rename the camel-case identifiers in uec
+
+ Rename riscRx/riscTx to risc_rx/risc_tx to comply with Codingstyle.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit feb7838f979ec2b581df3c791b9ae3284c36bb47
+Author: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+Date: Fri Apr 3 15:36:13 2009 -0500
+
+ 85xx: Add P2020DS support
+
+ The patch adds support for P2020DS reference platform.
+ DDR3 interface uses hard-coded initialization rather than SPD
+ for now and was tested at 667Mhz. Some PIXIS register
+ definitions and associated code sections need to be fixed.
+ TSEC1/2/3, NOR flash, MAC/SYS ID EEPROM, PCIE1/2/3 are all
+ tested under u-boot.
+
+ Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 229549a56d9ae413c00f64fd7c728c6879a1b54b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 9 16:57:47 2009 +0200
+
+ mpc512x: MPC5121ADS: Add NAND support
+
+ This patch adds NAND support to the MPC5121ADS board. Please
+ note that the image size increased since NAND support didn't
+ fit in the current image size (256k).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Wolfgang Denk <wd@denx.de>
+
+commit 35f2edbb6cad043ccd5ea6e78fe9b7aa21d8395f
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 9 16:57:03 2009 +0200
+
+ nand/mpc512x: Add MPC512x NAND support (NFC)
+
+ This patch adds NAND Flash Controller driver for MPC5121 revision 2.
+ All device features, except hardware ECC and power management, are
+ supported.
+
+ This NFC driver replaces the one orignally posted by John Rigby:
+
+ "[PATCH] Freescale NFC NAND driver"
+
+ It's a port of the Linux driver version posted by Piotr Ziecik a few
+ weeks ago. Using this driver has the following advantages (from my
+ point of view):
+
+ - Compatibility with the Linux NAND driver (e.g. ECC usage)
+ - Better code quality in general
+ - Resulting U-Boot image is a bit smaller (approx. 3k)
+ - Better to sync with newer Linux driver versions
+
+ The only disadvantage I can see, is that HW-ECC is not supported right
+ now. But this could be added later (e.g. port from Linux driver after
+ it's supported there). Using HW-ECC on the MCP5121 NFC has a general
+ problem because of the ECC usage in the spare area. This collides with
+ JFFS2 for example.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Piotr Ziecik <kosmo@semihalf.com>
+ Cc: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+ Cc: Scott Wood <scottwood@freescale.com>
+
+commit e53b507cee5d976953134a565c72fd32c967d7dd
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 9 11:50:40 2009 +0200
+
+ mpc512x: Add esd gmbh mecp5123 board support
+
+ MECP5123 is a MPC5121E based module by esd gmbh.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 6bd55cc65d0c3aa84d719518254fb3c650239ed9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 9 11:50:05 2009 +0200
+
+ mcp512x: Add macros for SCFR LPC divisor access
+
+ Thos macros will be used by the esd mecp5123 board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c60dc8527dbb2a1318c03bc18bdebcfbd0164551
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 8 09:38:07 2009 +0200
+
+ mpc512x: Fix problem with I2C access before relocation
+
+ This is needed for the upcoming esd MECP5123 board port which uses
+ I2C EEPROM for environment storage.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ Acked-by: Heiko Schocher<hs@denx.de>
+
+commit 58f10460b05e0928d986b15edd4f2e1e99403f7e
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 4 13:35:39 2009 +0200
+
+ 74xx_7xx: CPCI750: Add CPCI adapter/target support
+
+ The CPCI750 can be built as CPCI host or adapter/target board. This patch
+ adds support for runtime detection of those variants.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit ae7a2739d7a0704437376e229bb21940952c55be
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 5 05:45:41 2009 +0200
+
+ 74xx_7xx: CPCI750: Enable access to PCI function > 0
+
+ The Marvell bridge 64360 supports serveral PCI functions, not only 0. This
+ patch enables access to those functions.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit e5b563e9ec54c3f6d702c8fa2b711b4a6150243a
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 4 13:35:37 2009 +0200
+
+ 74xx_7xx: CPCI750: Minor coding style cleanup of cpci750.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 0e5ef07d0d91bd3d87ebea0534f538561aa974d5
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 4 13:35:36 2009 +0200
+
+ 74xx_7xx: CPCI750: Add loadpci command
+
+ This command is used to load/boot an OS-image which is transferred from
+ the CPCI host to the CPCI target/adapter.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 0a14d6b8f4d21ff59a9b7686a49a77069a9fcd2a
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 4 13:35:35 2009 +0200
+
+ 74xx_7xx: CPCI750: Add commandline editing/history
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 60cfe87bd39e6f07f2b92eb4bff82bfd105f4724
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 4 16:55:34 2009 +0200
+
+ UBI: Add compile-time check for correct malloc area configuration
+
+ UBI is quite memory greedy and requires at least approx. 512k of malloc
+ area. This patch adds a compile-time check, so that boards will not
+ build with less memory reserved for this area (CONFIG_SYS_MALLOC_LEN).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7ce6031afc8671c8b47c6135b3678d43fcd02852
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Apr 6 21:24:43 2009 +0530
+
+ sf: new Macronix MX25xx SPI flash driver
+
+ Added macronix SF driver for MTD framework
+ MX25L12805D is supported and tested
+ TBD: sector erase implementation, other deivces support
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2a6cc58869305f346e389eefdfa96dea5146cb0c
+Author: Todor I Mollov <tmollov@ucsd.edu>
+Date: Sat Apr 4 07:14:44 2009 -0400
+
+ sf: atmel: implement power-of-two write/erase funcs
+
+ Signed-off-by: Todor I Mollov <tmollov@ucsd.edu>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 4bc6eb79be2a7317425575184324b94e3b43fbc2
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Mon May 25 17:23:18 2009 +0530
+
+ mpc85xx: 8536ds: Add USB related CONFIGs
+
+ This patch adds CONFIGs for enabling USB in mpc8536ds and also
+ adds usb_phy_type in CONFIG_EXTRA_ENV_SETTINGS. Also revamps its
+ Copyright.
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 6823e9b01290977c4d9c90381459c01f66e12e79
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Mon May 25 17:23:17 2009 +0530
+
+ mpc83xx: 8315erdb: Add USB related CONFIGs
+
+ This patch adds CONFIGs for enabling USB in mpc8315erdb and also
+ adds usb_phy_type in CONFIG_EXTRA_ENV_SETTINGS. Also revamps its
+ Copyright.
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit a07bf180efc3c0de4a89a3bd49a7c7584dfb95a8
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Thu May 21 17:32:48 2009 +0530
+
+ mpc85xx: USB: Add support
+
+ The following patch adds 85xx-specific USB support and also
+ revamps Copyright in immap_85xx.h
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 4ef01010aa4799c759d75e67007fdd3a38c88c8a
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Mon May 25 17:23:16 2009 +0530
+
+ mpc83xx: USB: Reorganized its support
+
+ The following patch reorganizes/reworks the USB support for mpc83xx
+ as under:-
+
+ * Moves the 83xx USB clock init from drivers/usb/host/ehci-fsl.c to
+ cpu/mpx83xx/cpu_init.c
+
+ * Board specific usb_phy_type is read from the environment
+
+ * Adds USB EHCI specific structure in include/usb/ehci-fsl.h
+
+ * Copyrights revamped in most of the following files
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit ed90d2c87158e5114b6009fa95bb6417e4b27b3e
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Thu May 21 17:32:27 2009 +0530
+
+ mpc8xxx: USB: Relocates ehci-fsl.h to include/usb
+
+ The following patch moves 8xxx-specifc USB #defines from
+ drivers/usb/host/ehci-fsl.h to include/usb.
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit cfd39cdf9422d3d25e9b3c058865f4c1f66f34da
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Thu May 21 17:32:15 2009 +0530
+
+ mpc8xxx: USB: Removed reenablement of its interface
+
+ To prepare for the 85xx USB support, which requires interface enablement
+ only once in (specified) order, no different than instructions for
+ enabling the interface under 83xx. It is unknown why the original author
+ enabled the interface twice (checked for references in errata, etc).
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 2c7920afaf96d9779304202cd8a355b4f7576a83
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri May 22 17:23:25 2009 -0500
+
+ 83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x
+
+ Use the standard lowercase "x" capitalization that other Freescale
+ architectures use for CPU defines to prevent confusion and errors
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 0f898604945af4543c1525fc33b6bae621a3b805
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri May 22 17:23:24 2009 -0500
+
+ 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
+
+ Use the standard lowercase "xx" capitalization that other Freescale
+ architectures use for CPU defines to prevent confusion and errors
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ba4feae90ca71de1681d5808f17e73224d8f03c4
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 2 16:53:16 2009 +0200
+
+ mpc512x: Use serial_setbrg() in serial_init() to not duplicate the code
+
+ This patch removes the duplicated code for baudrate generator configuration
+ in the PSC serial_init() implementation by calling serial_setbrg() instead
+ of duplicating the code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b8c1d6a54ff8195488b68e163de8ec31f1603496
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 2 16:53:15 2009 +0200
+
+ mpc512x: Fix PSC divisor calculation for baudrate setting
+
+ The wrong input frequency was used in serial_setbrg(). This patch fixes
+ this by using ips_clk as input frequency for the PSC baudrate generator.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 52568c3654b2b257016d52167805ae132faac14e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:46 2009 +0200
+
+ MPC512x: add support for ARIA board
+
+ ARIA is a MPC5121E based COM Express module by Dave/DENX.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit 3b74e7ec58e2cc352b0a396a614065cfeb8d138f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:45 2009 +0200
+
+ MPC512x: remove include/mpc512x.h
+
+ Move needed definitions (register descriptions etc.) from
+ include/mpc512x.h into include/asm-ppc/immap_512x.h.
+
+ Instead of using a #define'd register offset, use a function that
+ provides the PATA controller's base address.
+
+ All the rest of include/mpc512x.h are register offset definitions
+ which can be eliminated by proper use of C structures.
+
+ There are only a few register offsets remaining that are needed in
+ cpu/mpc512x/start.S; for these we provide cpu/mpc512x/asm-offsets.h
+ which is intended as a temporary workaround only. In a later patch
+ this file will be removed, too, and then auto-generated from the
+ respective C structs.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit a927e491b2a326c1e9c4313e3ce4042988422697
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:44 2009 +0200
+
+ MPC512x FEC: get rid of duplicated struct ethernet_regs
+
+ Use existing struct fec512x instead.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 843efb1192cc8fd4f904a23dbab4e0fe3e1c5bc2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:43 2009 +0200
+
+ MPC512x: use I/O accessors instead of pointer accesses
+
+ This commit changes the MPC512x code to use I/O accessor calls (i.e.
+ out_*() and in_*()) instead of using deprecated pointer accesses.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit 19dc7e179268be148e550c36203208c662610d76
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:42 2009 +0200
+
+ MPC512x: add more hardware description to immap_512x.h
+
+ - add GPIO module description
+ - add Address Latch Timing Register description
+ - add IO Control Memory Map
+ - add FEC Memory Map
+
+ Also change board/freescale/mpc5121ads/mpc5121ads.c and
+ cpu/mpc512x/iopin.c as needed.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit 72601d04fdfdd4c7597afcf1f6aab654bd99366c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:41 2009 +0200
+
+ Rename ads5121 board into mpc5121ads
+
+ We rename the board so we use a consistent name in U-Boot and in
+ Linux. Also, we use this opportunity to move the board into the
+ Freecale vendor directory.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit debf87415579c0f50aab9e0832976d4506babe0f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:40 2009 +0200
+
+ cpu/mpc512x/diu.c: fix warning: assignment from incompatible pointer type
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit 8b251263191ec554967dd1add6237c1ba7f7eb25
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:39 2009 +0200
+
+ cpu/mpc512x/pci.c: minor coding style cleanup
+
+ Get rid of variable declaration in the middle of the code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit de26ef99bddbce4ed225f93afcf0bee99c3b6f87
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:38 2009 +0200
+
+ mpc512x: Move common files to share them by several boards
+
+ We will soon see several new MPC521x based boards added. This patch
+ moves files that are not board specific to a common directory so they
+ can be shared by all such ports. It also splits off common IDE code
+ into a new file, cpu/mpc512x/ide.c .
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit 03e069dc0a765d506f78a68319acf33d432e035b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:37 2009 +0200
+
+ mpc512x: change cpu/mpc512x/Makefile to use Kconfig style
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit a89c33db96a1e55319a286dd4c3c05ca64ac6bfd
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun May 24 17:06:54 2009 +0200
+
+ General help message cleanup
+
+ Many of the help messages were not really helpful; for example, many
+ commands that take no arguments would not print a correct synopsis
+ line, but "No additional help available." which is not exactly wrong,
+ but not helpful either.
+
+ Commit ``Make "usage" messages more helpful.'' changed this
+ partially. But it also became clear that lots of "Usage" and "Help"
+ messages (fields "usage" and "help" in struct cmd_tbl_s respective)
+ were actually redundant.
+
+ This patch cleans this up - for example:
+
+ Before:
+ => help dtt
+ dtt - Digital Thermometer and Thermostat
+
+ Usage:
+ dtt - Read temperature from digital thermometer and thermostat.
+
+ After:
+ => help dtt
+ dtt - Read temperature from Digital Thermometer and Thermostat
+
+ Usage:
+ dtt
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 94796d8544d4248028141bad11c6a74b840e9d6e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun May 24 19:17:29 2009 +0200
+
+ Make "usage" messages more helpful.
+
+ In case of incorrect command invocations U-Boot used to print pretty
+ useless "usage" messages, for example:
+
+ => nand markbad
+ Usage:
+ nand - NAND sub-system
+
+ In the result, the user would have to run the "help" command to get
+ the (available) information about correct command usage. Change this,
+ so that this information gets always printed.
+
+ Note that this changes the user interface of all commands, but
+ hopefully to the better.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4c94f6c54bbc4dc5f418da01d8ec01e2adf636be
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun May 24 02:26:19 2009 -0400
+
+ nvedit: speed up printing of environment
+
+ The printing code would check the same environment byte multiple times and
+ write to the console one byte at a time. For some devices (such as the
+ Blackfin JTAG console which operates in 8 bytes at a time), this is pretty
+ damned slow. So create a small 16 byte buffer to fill up and send to puts
+ as needed. In the process, unify the different print functions, shrink
+ the resulting code (source and compiled), and avoid excess env reads as
+ those too can be somewhat expensive depending on the board.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3112030a430553768de5d30c05bedf8710784452
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 22 19:28:52 2009 +0200
+
+ config.mk: remove un-needed REMOTE_BUILD check
+
+ as $(obj) is empty when in tree build
+
+ %.s: %.S
+ $(CPP) $(AFLAGS) -o $@ $<
+
+ and
+
+ $(obj)%.s: %.S
+ $(CPP) $(AFLAGS) -o $@ $<
+
+ are the same
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 651351fe980b20217b014b9a888398f18d77951c
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Wed May 20 07:55:41 2009 -0500
+
+ FAT replace compare_sign with strncmp.
+
+ The static function compare_sign is only used to compare the fs_type string
+ and does not do anything more than what strncmp does.
+
+ The addition of the trailing '\0' to fs_type, while legal, is not needed
+ because the it is never printed out and strncmp does not depend on NULL
+ terminated strings.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit ecb1dc892297d5d99876907328fed732feefeab2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed May 20 04:35:14 2009 -0400
+
+ Add support for Linux-like kallsysms
+
+ The kernel stores address<->symbol names in it so things can be decoded at
+ runtime. Do it in U-Boot, and we get nice symbol decoding when crashing.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 36c9169aa6f79ddf604a3bca64e145654f94888b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun May 17 16:01:54 2009 +0200
+
+ cmd_mtdparts.c: allow to omit definitions for default settings
+
+ There is actually no good reason to enforce that all board
+ configuations must define default settings for "mtdids" and
+ "mtdparts". Actually this may be difficult to handle, especially on
+ boards where different sizes of flash chips can be fit, so there is no
+ real "default" partition map for all boards.
+
+ Lift this arbitrary limitation.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 864aa034f3a0e10ce710e8bbda171df3cab59414
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 12 14:31:56 2009 +0200
+
+ cmd_mtdparts: Move to common handling of FLASH devices via MTD layer
+
+ This patch removes all references to the direct CFI FLASH interface
+ (via flash_info[]). Now that all FLASH types currently handled in
+ mtdparts are available (if selected, see below) via the MTD infrastructure.
+ This is NOR, NAND and OneNAND right now. This can be achieved by defining
+ the following options:
+
+ CONFIG_MTD_DEVICE (for all FLASH types)
+
+ plus
+
+ CONFIG_FLASH_CFI_MTD (for NOR FLASH)
+
+ So we need to add those defines to the board config headers currently
+ using the mtdparts commands. This is done via another patch, so
+ we shouldn't break mtdparts compatibility.
+
+ One big advantage from this solution is that the cmd_mtdparts.c is
+ *much* cleaner now. Lot's of #ifdef's are removed and the code itself
+ is smaller. Additionally the newly added MDT concatenation feature
+ can new be used via the mtdparts infrastructure and therefor via
+ UBI etc.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Ladislav Michl <ladis@linux-mips.org>
+ Cc: Scott Wood <scottwood@freescale.com>
+
+commit d558107c18708050f05b6639b2192efb67c905dc
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 12 14:31:18 2009 +0200
+
+ mtd: Introduce CONFIG_MTD_DEVICE to select compilation of mtdcore.o
+
+ This new define enables mtdcore.c compilation and with this we can
+ select the MTD device infrastructure needed for the reworked mtdparts
+ command.
+
+ We now have the 2 MTD infrastructure defines, CONFIG_MTD_DEVICE and
+ CONFIG_MTD_PARTITIONS. CONFIG_MTD_DEVICE is needed (as explained above)
+ for the "mtdparts" command and CONFIG_MTD_PARTITIONS is needed for UBI.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Scott Wood <scottwood@freescale.com>
+
+commit 942556a92a8c1eb1bd76584a5143f6f57dcb25ad
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 12 14:32:58 2009 +0200
+
+ mtd: MTD related config header changes (mtdparts command)
+
+ By changing the cmd_mtdparts to only use the MTD infrastructure and
+ not the direct interface to the CFI NOR FLASH driver we now need
+ to add the MTD infrastructure to all boards using those mtdparts
+ commands. This patch adds those components:
+
+ CONFIG_MTD_DEVICE (for all FLASH types)
+
+ plus
+
+ CONFIG_FLASH_CFI_MTD (for NOR FLASH)
+
+ To all board maintainers: Please test this on your platforms and
+ report any problems/issues found. Thanks.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Wolfgang Denk <wd@denx.de>
+ Cc: Ron Madrid <info@sheldoninst.com>
+ Cc: Georg Schardt <schardt@team-ctech.de>
+ Cc: Michal Simek <monstr@monstr.eu>
+ Cc: Ladislav Michl <ladis@linux-mips.org>
+ Cc: Martin Krause <martin.krause@tqs.de>
+ Cc: Gary Jennejohn <garyj@denx.de>
+ Cc: Ricardo Ribalda <ricardo.ribalda@uam.es>
+
+commit 8d2effea23e938631126a7888008a0637e13b389
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 11 16:03:55 2009 +0200
+
+ mtd: Update MTD infrastructure to support 64bit device size
+
+ This patch brings the U-Boot MTD infrastructure in sync with the current
+ Linux MTD version (2.6.30-rc3). Biggest change is the 64bit device size
+ support and a resync of the mtdpart.c file which has seen multiple fixes
+ meanwhile.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Cc: Kyungmin Park <kmpark@infradead.org>
+
+commit 0a57265533c412adf6024f4b4955141f4346b2b9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 12 14:29:39 2009 +0200
+
+ mtd: Add MTD concat support to concatenate multiple MTD NOR devices
+
+ This patch adds concatenation support to the U-Boot MTD infrastructure.
+ By enabling CONFIG_MTD_CONCAT this MTD CFI wrapper will concatenate
+ all found NOR devices into one single MTD device. This can be used by
+ e.g by UBI to access a partition that spans over multiple NOR chips.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 55e0ed6078b10b0d425b6a0677f38a015c277df6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Apr 25 14:57:52 2009 +0200
+
+ make MODEM SUPPORT generic instead of duplicate it
+
+ and fix comment
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+ Adjusted Copyright message.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a30f519bd0cde78ba46b424314de94fdab863726
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Tue Jun 2 20:53:56 2009 -0500
+
+ ZOOM2 detect the version of the zoom2 board at runtime.
+
+ There are currently 3 versions of the zoom2 board.
+ The production board, that is currently being released.
+ The beta board, similar in form to the production board but not released.
+ The alpha board, a set of PCBs with a very limited circulation.
+
+ GPIO 94 is used to determine the version of the board. If GPIO 94 is clear,
+ the board is a production board, otherwise it is a beta board.
+
+ The alpha board will likely be mistaken for a beta board. An alpha board
+ was unavailible for testing.
+
+ This has been tested on the beta and production boards.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 718763c4745fd3d987a5576d2a67325e9444f9d4
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Wed Jun 3 01:53:57 2009 -0500
+
+ Beagle Convert the board version detection to use the OMAP3 GPIO interface.
+
+ There is no new functionality in the change.
+
+ This change is a conversion from the using raw register access to using
+ the OMAP3 GPIO API described in doc/README.omap3.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 7caa13fdd2d3dc957b4e0a228810a3a4a8ba499b
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Wed Jun 3 01:53:55 2009 -0500
+
+ Fix a typo in the instructions on using omap3's gpio interface.
+
+ Using the example for reading a gpio, shows the problem.
+ NULL should be the gpio number.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 0c9520efd651ce13451654a35307ec87d4a13a69
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 29 18:57:32 2009 -0500
+
+ ZOOM2 Define GPIO banks used.
+
+ Enable the function and interface clocks for banks 2,3,5 and 6.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 708cfb74b7c6df9c37d3c48988a154be79daefeb
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 29 18:57:31 2009 -0500
+
+ OMAP3 Turn on the GPIO bank clocks
+
+ The function and interface clocks for each GPIO bank, except the first, must
+ be explicitly turned on. These are controlled by the config level defines
+ CONFIG_OMAP3_GPIO_n where n is from 2 to 6.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 59272620c24549b5bcd03c94ba12ec302c1476a2
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Mar 26 15:26:01 2009 -0400
+
+ Coldfire M5271: Activate u-boot system timer interrupt.
+
+ This patch assigns the u-boot system timer interrupt to
+ interrupt level 3, priority 6. Without this patch the interrupt
+ will be a level 0, priority 0, which disables it and cause
+ u-boot functions that relies on the timer (e.g. sleep command)
+ to never return.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit dc26965ad3acdfb18780361d77a276b2843a90af
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Mon Mar 23 13:35:48 2009 -0400
+
+ Compier warning cleanup
+
+ Follow up to git commit: 19b5b533ccd522abeb501d510750693c35e20456
+
+ Cleanup on compiler warnings on unused variables now that
+ bd->bi_enetaddr is no longer used.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 42a83765d54f042b4079e05a3438789542429981
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Mar 20 15:30:10 2009 -0400
+
+ Adds WATCHDOG_RESET() function call to lib_m68k dtimer_interrupt.
+
+ Ported from lib_ppc/interrupts.c, this adds the ability for
+ the coldfire system timer to auto-reset the watchdog when
+ dtimer_interrupts is called.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit a24d96e40e1ca66dde6e6c158e7ecffafc5a2199
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Sun May 31 14:53:20 2009 +0200
+
+ arch_misc_init support for ARM architectures
+
+ This patch is required for Kirkwood support
+ may be used by other ARM architectures
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit b2403589b4d9996394bafc73eca3623f43ac2c31
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 31 14:53:18 2009 +0200
+
+ at91: move cpu info print to cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b32e189079fa16e1b647ac6b949fd4e0a9435343
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 31 12:44:46 2009 +0200
+
+ at91: move cpu name define to arm/arch/ cpu header
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5bb59b3c906ee01adfaac9565443e5236a793079
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 31 12:44:45 2009 +0200
+
+ at91: extract reset from timer
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 61cf851b09cf8b67009ec11fc47c16add6b142a5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 31 12:44:43 2009 +0200
+
+ omap24xx: rename reset file
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9d4fc99dbdbfda1260aad478e83fca7cdf0e1a32
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun May 31 12:44:42 2009 +0200
+
+ OMAP3: Fix CKE1 MUX setting to allow self-refresh
+
+ The Beagle rev Cx and Overo boards are using both SDRC CSes. The MUX
+ setting is needed for the second CS clock signal to allow the 2 RAM
+ parts to be put in self-refresh correctly. This also works on rev B
+ Beagle boards with 128M of RAM.
+
+ From: Steve Sakoman <steve@sakoman.com>
+ From: Jean Pihet <jpihet@mvista.com>
+ Signed-off-by: Jean Pihet <jpihet@mvista.com>
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 3962c4f9fc4482a6547f3c3d3d5e986e625abb8a
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun May 31 12:44:41 2009 +0200
+
+ OMAP3: Zoom2: Enable Board and CPU info
+
+ With other OMAP3 boards we recently switched to CPU and Board
+ info API. From parallel merge, this is missing for Zoom2.
+ Enable it for Zoom2, too.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Acked-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 83ae698ff26b81b569ca32f7f2b008ad0da15e66
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun May 31 12:44:39 2009 +0200
+
+ ZOOM2 Add led support.
+
+ This patch controls the large LED on the top left of the zoom2.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 660888b7fb8840ce169dcd2589e49ab44c46b87b
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun May 31 12:44:37 2009 +0200
+
+ ZOOM2 Add serial support.
+
+ Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board.
+ The default serial is from the USB connector on left side of the debug board.
+ The USB connector will produce 2 of the 4 UARTS. On your host pick the first
+ enumeration.
+
+ The details of the setting of the serial gpmc setup are not available.
+ The values were provided by another party.
+
+ The serial port set up is the same with Zoom1.
+ Baud rate 115200, 8 bit data, no parity, 1 stop bit, no flow.
+
+ The kernel bootargs are
+ console=ttyS3,115200n8
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 3ea201b016ab259a5ac8824af767569522768c47
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 31 12:44:27 2009 +0200
+
+ lh7a40x: move serial driver to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 379be585eb2343d8814a5cee5fb3da930d846bee
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 16 22:48:46 2009 +0200
+
+ pxa: move serial driver to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ad7e8aac6920f8b8a85b3cc2e93bca7458e99aa1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 9 13:21:19 2009 +0200
+
+ arm: remove cpu_init
+
+ move s3c44b0 to arch_cpu_init and as noone use cpu_init remove it
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c358d9c3f16571e8f825e81b75eaf32e228cb669
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 9 13:21:18 2009 +0200
+
+ arm: unify interrupt init
+
+ all arm init the IRQ stack the same way
+ so unify it in lib_arm/interrupts.c and then call arch specific interrupt init
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 10a451cd57cffbca875c97bbd8929059c5627ec6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 8 20:24:12 2009 +0200
+
+ arm: unify linker script
+
+ all arm boards except a few use the same cpu linker script
+ so move it to cpu/$(CPU)
+
+ that could be overwrite in following order
+ SOC
+ BOARD
+ via the corresponding config.mk
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9475c63c7855edd863c93a9bb0f4b8e240d9d212
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 16 10:02:05 2009 +0200
+
+ afeb9260: fix macb device init
+
+ uses PA10, PA11 for ETX2 and ETX3.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1bbae2b816d4ed38db2ebf42166a973b1ffc0df7
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 27 10:34:32 2009 +0200
+
+ ppc4xx: Remove PCI async bootup message if PCI is not used
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a3455c00510c5abf1e91743c4a02d8393b6df18d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 09:19:52 2009 +0200
+
+ TQM834x: use buffered writes to accelerate writing to flash
+
+ Also enable display of 'E'mpty sectors in "flinfo" output.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 4681e673a51c48f4c096aa3c8fae5e6217ffd58d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 14 23:18:34 2009 +0200
+
+ TQM834x: add FDT support
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 929b79a0b5e48303ab04aae9d0abceb0c707f111
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 14 23:18:33 2009 +0200
+
+ TQM834x: fix environment size; add redundant env.
+
+ Also reserve more space for U-Boot as it will probably grow soon.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2ae0f35fd60c7345446835b95a4daff356e1f031
+Author: Thomas Lange <thomas@corelatus.se>
+Date: Sun May 3 20:07:33 2009 +0200
+
+ ARM DaVinci: Reset with watchdog enabled
+
+ Once the Davinci watchdog has been enabled, the timeout
+ value cannot be changed. If the timeout in use is long,
+ it can take a long time for card to reset. By writing
+ an invalid service key, we can trigger an immediate reset.
+
+ Signed-off-by: Thomas Lange <thomas@corelatus.se>
+
+commit 6cc7ba9ed43106946aa9aa868302aa2faf1d17be
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 10:07:43 2009 +0200
+
+ video: Add an option to skip video initialization
+
+ This patch adds an option to skip the video initialization on for all
+ video drivers. This is needed for the CPCI750 which can be built as
+ CPCI host and adapter/target board. And the adapter board can't
+ access the video cards located on the CompactPCI bus.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Anatolij Gustschin <agust@denx.de>
+
+ Rebased against simplifying patch.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f62f64692ff7f6226ad221d5df6487ea5ef39bdd
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 10:07:42 2009 +0200
+
+ drv_video_init(): simplify logic
+
+ Simplify nesting of drv_video_init() and use a consistent way of
+ indicating failure / success. Before, it took me some time to realize
+ which of the returns was due to an error condition and which of them
+ indicated success.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Anatolij Gustschin <agust@denx.de>
+
+commit 1699da6297b8c22da16cf85b3c79192f1a6d70ca
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed May 13 21:01:13 2009 +0200
+
+ at91: regroup IP hw init in one file per soc
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 28b00324becf3552134ae1e086509dc9c3d6e932
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:48:37 2009 +0200
+
+ dm355 evm support
+
+ Initial U-Boot support for the DaVinci DM355 EVM. This is a board
+ from Spectrum Digital. Board docs include schematic and firmware
+ for its microcontroller:
+
+ http://c6000.spectrumdigital.com/evmdm355/revd/
+
+ Most of the DM355 chip is fully documented by TI, the most notable
+ exception being the MPEG/JPEG coprocessor (programmable using codecs
+ available at no cost from TI), which is omitted from its DM335 sibling:
+
+ http://focus.ti.com/docs/prod/folders/print/tms320dm355.html
+
+ This version can boot from the on-board DM9000 Ethernet chip, after
+ being loaded (from NAND, MMC/SD, or UART). In the near future, NAND
+ and USB support could be added ... NAND support is being held back
+ until the support for the 4-bit ECC hardware is ready.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 136cf92dc9e84c9a1bf567f1fe741092bf765495
+Author: Sanjeev Premi <premi@ti.com>
+Date: Fri May 15 23:48:37 2009 +0200
+
+ OMAP3EVM: Set default bootfile
+
+ The current configuration doesn't define default
+ bootfile; leading to this warning at execution:
+
+ OMAP3_EVM # dhcp
+ ...
+ ...
+ DHCP client bound to address 192.168.1.11
+ *** Warning: no boot file name; using 'AC18BE16.img'
+ TFTP from server 0.0.0.0; our IP address is 192.168.1.11;
+ sending through gateway 192.168.1.1
+ Filename 'AC18BE16.img'.
+ Load address: 0x82000000
+ Loading: *
+ TFTP error: 'File not found' (1)
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit 1a09d05abfc6d4d4f1fce9f6bd0275bd1c08d4f5
+Author: s-paulraj@ti.com <s-paulraj@ti.com>
+Date: Fri May 15 23:48:36 2009 +0200
+
+ ARM DaVinci: Minor Updates to base addresses
+
+ Patch adds base addresses for DaVinci DM365. Updated patches for DM365
+ will be posted soon.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit de193e8e369f5f029ed3b6e2fc60341098eea766
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:48:36 2009 +0200
+
+ ZOOM2 Add support for debug board detection.
+
+ The logicpd web site is a good source for general information on this board.
+ Please start looking here if the below links are broken.
+ http://www.logicpd.com
+
+ This is a pdf of the product
+ http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
+
+ This is a pdf of the product quick start guide.
+ The debug board is described here.
+ http://support.logicpd.com/downloads/1165/
+
+ This is a wiki showing the debug board in use
+ https://omapzoom.org/gf/project/omapzoom/wiki/?pagename=GettingStartedWithZoomII_AKA_OMAP34XII_MDP
+
+ The zoom2 has an auxillary board that contains the serial, net, jtag and
+ battery simulator. This change supports a runtime check if the debug board is
+ connected.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 0c872ecd01d6782ae9d37b6eb721404a4a48f356
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:48:36 2009 +0200
+
+ OMAP3 Port kernel omap gpio interface.
+
+ Port version 2.6.27 of the linux kernel's omap gpio interface to u-boot.
+ The orignal source is in linux/arch/arm/plat-omap/gpio.c
+
+ See doc/README.omap3 for instructions on use.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 376aee78dd66ae0dc4ce496cbe93ecc80aaad48e
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:48:36 2009 +0200
+
+ ZOOM2 Add initial support for Zoom2
+
+ Zoom2 is a new board from Texas Instruments and LogicPD
+
+ The logicpd web site is a good source for general information on this board.
+ Please start looking here if the below links are broken.
+ http://www.logicpd.com
+
+ This is a pdf of the product
+ http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
+ This is the product description web page
+ http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp
+
+ This patch provides a zoom2 base target by copying zoom1 and by making some
+ obvious changes.
+
+ To configure, run
+ make omap3_zoom2_config
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 53925acf1b5c1a1e6230cda2697640cd05bd1104
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Fri May 15 23:48:33 2009 +0200
+
+ ARM DaVinci:Consolidate common u-boot.lds
+
+ The u-boot.lds is common for all DaVinci boards. The patch removes
+ multiple instances and moves the u-boot.lds to /cpu/arm926ejs/davinci
+ folder. This addresses one of the comments i received while submitting
+ patches for DM3xx
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 68a531fd465f5c0b3d373e0010afed32e88d37c4
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:47:52 2009 +0200
+
+ OMAP Consolidate common u-boot.lds to cpu layer.
+
+ The u-boot.lds file is common for all omap boards.
+ Move a cleaned up version to the cpu layer and add makefile logic to use it.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 65a76d4f947a193e57bb8f8093c481f27e059f8f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:47:14 2009 +0200
+
+ arm/dcc: add xscale support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 66e8f9da6879fe37f3159b3997bff874842dc51d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:47:14 2009 +0200
+
+ arm/dcc: use static support to allow to use it at anytime
+
+ the dcc can be used at the start of the cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7893aa1eb6f52c3957efc301b436f1fa11e91a00
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:47:13 2009 +0200
+
+ ARM: Update mach-types
+
+ update against linux v2.6.29
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2907798926ee932f453ac8538e7a6c05c18428a5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:47:13 2009 +0200
+
+ arm920/926/926: remove non needed header
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 269dfea017b09c5a999d3053d00505c19789c350
+Author: David Brownell <david-b@pacbell.net>
+Date: Fri May 15 23:47:13 2009 +0200
+
+ davinci dm6446evm NAND update
+
+ This updates the optional (non-default!) NAND support for the
+ DaVinci DM6446 EVM:
+
+ - include MTD partitioning, defaulting to what Linux uses
+
+ - use a flash-based BBT, which among other things speeds bootup
+
+ This matches code that's now queued for mainline Linux, and might
+ even merge in an upcoming 2.6.30-rc; and the MTIDS are set up so
+ that the U-Boot $mtdparts environment variable can be passed as-is
+ on the kernel command line as a cmdlinepart override.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 7a4f511b59f08f51dde4ceacbd45f49b8bf2a5cc
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:47:12 2009 +0200
+
+ davinci: display correct clock info
+
+ Move the clock-rate dumping code into the cpu/.../davinci area
+ where it should have been, enabled by CONFIG_DISPLAY_CPUINFO,
+ updating the format and showing the DSP clock (where relevant).
+
+ Switch boards to use the cpuinfo() hook for this stuff.
+
+ Remove a few now-obsolete PLL #defines.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit daea928829098cae3c9ec6b801e52ba616725034
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:47:12 2009 +0200
+
+ ZOOM1 Remove more legacy NAND defines.
+
+ These legacy NAND defines are no longer needed by this target.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 65fd21c80fcaca2bbfe3ab06ab6ac68207408078
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:47:12 2009 +0200
+
+ LED Add documentation describing the status_led and colour led API.
+
+ This document describes the u-boot status LED API.
+ This allows common u-boot commands to use a board's leds to
+ provide status for activities like booting and downloading files.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 7cdf804f34378b910b4c4edd2dac7e3ca61c0825
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:47:12 2009 +0200
+
+ ARM Add blue colour LED to status_led.
+
+ There is exiting support for red,yellow,green but no blue.
+ The main LED on the zoom2 is a blue LED.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit b54384e3ba6b5535751f317fcd3940a53eed0d3a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:47:02 2009 +0200
+
+ arm: timer and interrupt init rework
+
+ actually the timer init use the interrupt_init as init callback
+ which make the interrupt and timer implementation difficult to follow
+
+ so now rename it as int timer_init(void) and use interrupt_init for interrupt
+
+ btw also remane the corresponding file to the functionnality implemented
+
+ as ixp arch implement two timer - one based on interrupt - so all the timer
+ related code is moved to timer.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5b4bebe1d20c4f2b70d48b06aed1016785efcc25
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:45:22 2009 +0200
+
+ OMAP3: Reorganize Makefile style
+
+ Reformat COBJS handling.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit b1966982718347f67317b3fb356439743ca68a37
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:45:22 2009 +0200
+
+ OMAP3: Remove dublicated interrupt code
+
+ Remove duplicated interrupt code. Original, identical code can be found
+ in lib_arm/interrupts.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit ac7260a4190315eba4a6e526c764f6cad0bbf8c5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:45:22 2009 +0200
+
+ at91rm9200: move reset code to reset.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2c75c78d94574ee996db2aa9b511258519471dd6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:45:22 2009 +0200
+
+ ixp/interrupts: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8fc3bb4b0603516ad641e2de252a400b85fd869b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:45:20 2009 +0200
+
+ arm: cleanup remaining CONFIG_INIT_CRITICAL
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c20e28f49aaf38c7dede46d8f8fe8234fe90822c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:45:12 2009 +0200
+
+ arm946es: remove non used timer
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f1d944e30eb8ff89080fa03fb98d8fb5c82388d2
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:44:09 2009 +0200
+
+ davinci: add basic dm355/dm350/dm335 support
+
+ Add some basic declarations for DaVinci DM355/DM350/DM335 support,
+ keyed on CONFIG_SOC_DM355. (DM35X isn't quite right because the
+ DM357 is very different; while the DM355 is like a DM355 without
+ the MPEG/JPEG coprocessor).
+
+ These have different peripherals than the DM6446, and some of
+ the peripherals are at different addresses. Notably for U-Boot,
+ there's no EMAC, and the NAND controller address is different
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit bd36fdc146654f9de4e2ad346126e6bd2990fb19
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:44:09 2009 +0200
+
+ davinci: fix dm644x buglets
+
+ Fix two buglets in the dm644x support: don't set two must-be-zero
+ bits in the UART management register; and only include the I2C hooks
+ if the I2C driver is being included.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit f79043681ff44bae435c06f830e51e1546db7e19
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:44:08 2009 +0200
+
+ davinci: split out some dm644x-specific bits from psc
+
+ Split out DaVinci DM6446-specific bits from more generic bits:
+
+ - Add a CONFIG_SOC_DM644X. All current boards use DM6446 chips;
+ DM6443 and DM6441 chips differ in available peripherals.
+
+ - Move most DM644X-specific bits from psc.c to a new dm644x.c file,
+ which is conditionally built. It provides device-specific setup.
+
+ Plus minor coding style and comment updates with respect to the PSC.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 48ef5729555f41f51618b6a3016ac5c53c7c75dc
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:44:08 2009 +0200
+
+ davinci: cpu-specific build uses conditional make syntax
+
+ Update cpu/arm926ejs/davinci/Makefile to use COBJ-y type syntax.
+ Add the first conditional: for EMAC driver support. Not all
+ chips have an EMAC; and boards might not use it, anyway.
+
+ This doesn't touch PHY configuration; that should eventually
+ become conditional too.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 7b7808ae6dace59287f565e9323cda7b098a5612
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:44:06 2009 +0200
+
+ davinci: move psc support board-->cpu
+
+ Move DaVinci PSC support from board/* to cpu/* where it belongs.
+ The PSC module manages clocks and resets for all DaVinci-family
+ SoCs, and isn't at all board-specific.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 84f7411cb901b8df2391cf7e967ad0737f6194aa
+Author: David Brownell <david-b@pacbell.net>
+Date: Tue Apr 14 08:52:58 2009 -0700
+
+ DaVinci now respects SKIP_LOWLEVEL_INIT
+
+ Don't needlessly include lowlevel init code; that's only really
+ needed with boot-from NOR (not boot-from-NAND). The 2nd stage
+ loader (UBL) handles that before it loads U-Boot.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 641e0925e4bf7adf8e2e04e3ad81b840fd71cadd
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Sun Apr 12 22:49:26 2009 -0700
+
+ DaVinci Ethernet cleanup
+
+ Chips without the EMAC controller won't need the utilities
+ it uses to read an Ethernet address from EEPROM; so don't
+ include them needlessly.
+
+ Use is_valid_ether() to validate the address from EEPROM.
+ All-zero addresses aren't the only invalid addresses.
+ A fully erased EEPROM returns all-ones, also invalid...
+
+ Switch those Ethernet utilities to use "%pM" for printing
+ MAC addresses; and not say ROM when they mean EEPROM.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c790b04d230363d03939dc008bcc80f3ba4de1ae
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 11 15:50:12 2009 +0200
+
+ lib_arch/board.c: Move malloc initialization before flash_init()
+
+ This patch moves the malloc initialization before calling flash_init().
+ Upcoming changes to the NOR FLASH common CFI driver with optional
+ MTD infrastructure and MTD concatenation support will call malloc().
+ And nothing really speaks against enabling malloc just a little earlier
+ in the boot stage. Some architectures already enable malloc before
+ calling flash_init() so they don't need any changes here.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Wolfgang Denk <wd@denx.de>
+ Cc: Mike Frysinger <vapier@gentoo.org>
+ Cc: Scott McNutt <smcnutt@psyent.com>
+ Cc: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Cc: Daniel Hellstrom <daniel@gaisler.com>
+ Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit d873133f2ba9bd613d5f6552c31cc70fb13f15d3
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 11 13:46:14 2009 +0200
+
+ ppc4xx: Add Sequoia RAM-booting target
+
+ This patch adds another build target for the AMCC Sequoia PPC440EPx
+ eval board. This RAM-booting version is targeted for boards without
+ NOR FLASH (NAND booting) which need a possibility to initially
+ program their NAND FLASH. Using a JTAG debugger (e.g. BDI2000/3000)
+ configured to setup the SDRAM, this debugger can load this RAM-
+ booting image to the target address in SDRAM (in this case 0x1000000)
+ and start it there. Then U-Boot's standard NAND commands can be
+ used to program the NAND FLASH (e.g. "nand write ...").
+
+ Here the commands to load and start this image from the BDI2000:
+
+ 440EPX>reset halt
+ 440EPX>load 0x1000000 /tftpboot/sequoia/u-boot.bin
+ 440EPX>go 0x1000000
+
+ Please note that this image automatically scans for an already
+ initialized SDRAM TLB (detected by EPN=0). This TLB will not be
+ cleared. This TLB doesn't need to be TLB #0, this RAM-booting
+ version will detect it and preserve it. So booting via BDI2000
+ will work and booting with a complete different TLB init via
+ U-Boot works as well.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 837db3d87f4bfe9261629fb4a1bb433506a3056a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed May 6 08:41:45 2009 -0400
+
+ tools/envcrc: add --binary option to export embedded env
+
+ The --binary option to envcrc can be used to export the embedded env as a
+ binary blob so that it can be manipulated/examined/whatever externally.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 18cc7afd9a153a66854af862d14ba01c5496cf07
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Apr 28 16:50:53 2009 -0700
+
+ Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
+
+ All in-tree PPC4xx boards now use CONFIG_NET_MULTI
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 70be6c2d40076f14062b892152649f9a62832fc9
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Apr 29 09:51:01 2009 +0200
+
+ 4xx: Add support for DP405 hardware variants
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit de47a34d4de1d007a8951efd072283516d580ffa
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Apr 29 09:51:00 2009 +0200
+
+ 4xx: Remove binary cpld bitstream from DP405 board
+
+ This patch removes the cpld binary bitstream that is
+ used by esd's cpld command on DP405 boards.
+
+ Because u-boot with an external cpld bitstream may not
+ take more space in flash than before the u-boot binary is
+ shrinked a little bit. Some unused featues have been
+ removed therefore.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 700d553fd3afe804086de8f73d95153315eb0c32
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Apr 29 09:50:59 2009 +0200
+
+ 4xx: Remove binary cpld bitstream from VOM405 board
+
+ This patch removes the cpld binary bitstream that is
+ used by esd's cpld command on VOM405 boards.
+
+ Because u-boot with an external cpld bitstream may not
+ take more space in flash than before the u-boot binary is
+ shrinked a little bit.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0bb10630364c48d9857cbf5353da609fc4dd6751
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Apr 29 09:50:58 2009 +0200
+
+ 4xx: Remove binary cpld bitstream from PMC405 board
+
+ This patch removes the cpld binary bitstream that is
+ used by esd's cpld command on PMC405 boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7cc635fb35f5b94e304fa2243d56758f57f6416b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Apr 29 09:50:57 2009 +0200
+
+ 4xx: Remove binary cpld bitstream from CMS700 board
+
+ This patch removes the cpld binary bitstream that is
+ used by esd's cpld command on CMS700 boards.
+
+ Because u-boot with an external cpld bitstream may not
+ take more space in flash than before the u-boot binary is
+ shrinked a little bit. Some unused featues have been
+ removed therefore.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c1b2f79788deec75773b1d944d8aaf4a6d5baf9e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Apr 29 09:50:56 2009 +0200
+
+ esd/common: extend cpld command with address parameter
+
+ This patch adds support for an address parameter to esd's
+ cpld command. This is in preparation to remove compiled-in
+ binary cpld (xsvf) bitstreams.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9166b776350d16460c7330bfb0a50154ea0a1903
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:06 2009 -0500
+
+ cmd_i2c: Fix i2c help command output when CONFIG_I2C_MUX
+
+ When CONFIG_I2C_MUX was defined the output of 'help i2c' was not
+ correct, eg:
+
+ => help i2c
+ i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes.
+ speed [speed] - show or set I2C bus speed
+ i2c dev [dev] - show or set current I2C bus
+ ...
+
+ It has been changed to:
+ i2c speed [speed] - show or set I2C bus speed
+ i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes
+ i2c dev [dev] - show or set current I2C bus
+ ...
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 0a45a6357b02e5ce5bf899a60db09def6a129fee
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:05 2009 -0500
+
+ cmd_i2c: Clean up trivial helper functions
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e96ad5d3aba42f8ffe99f7cc5ec1bb9f21810035
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:04 2009 -0500
+
+ cmd_i2c: Clean up i2c command argument parsing
+
+ argc and argv should only be modified once instead of once for
+ every i2c sub-command
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 0f89c54be92773b23d66ac401ba6acb6144100c3
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:03 2009 -0500
+
+ i2c: Update references to individual i2c commands
+
+ The individual i2c commands imd, imm, inm, imw, icrc32, iprobe, iloop,
+ and isdram are no longer available so all references to them have been
+ updated to the new form of "i2c <cmd>".
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit d48eb5131d287f52bb85b4c58c8680a2e8e3b641
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:02 2009 -0500
+
+ i2c: Remove deprecated individual i2c commands
+
+ The following individual I2C commands have been removed: imd, imm, inm,
+ imw, icrc32, iprobe, iloop, isdram.
+
+ The functionality of the individual commands is still available via
+ the 'i2c' command.
+
+ This change only has an impact on those boards which did not have
+ CONFIG_I2C_CMD_TREE defined.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 655b34a78adf60ef260981688837904208883ae9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:01 2009 -0500
+
+ i2c: Create common default i2c_[set|get]_bus_speed() functions
+
+ New default, weak i2c_get_bus_speed() and i2c_set_bus_speed() functions
+ replace a number of architecture-specific implementations.
+
+ Also, providing default functions will allow all boards to enable
+ CONFIG_I2C_CMD_TREE. This was previously not possible since the
+ tree-form of the i2c command provides the ability to display and modify
+ the i2c bus speed which requires i2c_[set|get]_bus_speed() to be
+ present.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 8229e9c04f7019ddd76aea05d4dca044cbc9a34a
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:00 2009 -0500
+
+ cm5200: Make function test command names more unique
+
+ Add "_test" to cm5200's function test command names to prevent
+ overlap with common, global function names. Originally, the
+ "do_i2c" function test command interfered with
+ common/cmd_i2c.c's "do_i2c" when CONFIG_I2C_CMD_TREE was defined.
+
+ The functions were also made static as they are not globally accessed.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit f0722ee762e8dada9d7f74ac2745e043f83aae85
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:34:09 2009 -0500
+
+ tsi108_i2c: Add i2c_init() stub function
+
+ Add the i2c_init() function so that the tsi108_i2c.c driver fits
+ U-Boot's standard I2C API which is utilized by cmd_i2c.c
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 8d907e79bc9babb27396e34be54cfdc36ff62fb9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:34:08 2009 -0500
+
+ mpc7448hpc2: Add CONFIG_SYS_I2C_SPEED define
+
+ Add standard CONFIG_SYS_I2C_SPEED define for the mpc7448hpc2 so that
+ it can use the common 'i2c speed' command. Note that the I2C controller
+ utilized by the mpc7448hpc2 has a fixed speed and cannot be changed
+ dynamically.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a056b1ce9e19b4d4ab3dd01c3f897dcd832cd37f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:34:07 2009 -0500
+
+ Marvell: i2c cleanup
+
+ The following changes were made, primarily to bring the Marvell i2c
+ driver in line with U-Boot's current I2C API:
+ - Made i2c_init() globally accessible
+ - Made i2c_read() and i2c_write() return an integer
+ - Updated i2c_init() calls to pass in CONFIG_SYS_I2C_SLAVE in the
+ offhand chance someone adds slave support in the future
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 54afc6ee10c8cd09598d814d49e601359b005e49
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:34:06 2009 -0500
+
+ cpci750: i2c cleanup
+
+ The following changes were made, primarily to bring the cpci750 i2c
+ driver in line with U-Boot's current I2C API:
+ - Made i2c_init() globally accessible
+ - Made i2c_read() and i2c_write() return an integer
+ - Updated i2c_init() calls to pass in CONFIG_SYS_I2C_SLAVE in the
+ offhand chance someone adds slave support in the future
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 9c90a2c8e87414007a016b7cd099ac1e32fd301b
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:34:05 2009 -0500
+
+ i2c.h: Provide a default CONFIG_SYS_I2C_SLAVE value
+
+ Many boards/controllers/drivers don't support an I2C slave interface,
+ however CONFIG_SYS_I2C_SLAVE is used in common code so provide a
+ default
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e7563aff174f77aa61dab1ef5d9b47bebaa43702
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 11 23:42:35 2009 -0500
+
+ fsl-ddr: Fix handling of >4G of memory when !CONFIG_PHYS_64BIT
+
+ The ddr code computes most things as 64-bit quantities and had some places
+ in the middle that it was using phy_addr_t and phys_size_t.
+
+ Instead we use unsigned long long through out and only at the last stage of
+ setting the LAWs and reporting the amount of memory to the board code do we
+ truncate down to what we can cover via phys_size_t.
+
+ This has the added benefit that the DDR controller itself is always setup
+ the same way regardless of how much memory we have. Its only the LAW
+ setup that limits what is visible to the system.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d4b130dc80761b430dc5b410159cd158fca1a348
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 11 23:40:34 2009 -0500
+
+ 85xx: Use print_size to report amount of memory not mapped by TLBs
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6e2aebc33fa740c068fe28d40eaf0319b7c7287e
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:42 2009 -0400
+
+ 85xx: Add README for MPC8569MDS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b2aab386e957ba684d4f2a466bfaa91770e5058a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:33 2009 -0400
+
+ 85xx: Add UART1 support for MPC8569MDS
+
+ MPC8569 UART1 signals are muxed with PortF bit[9-12], we need to define
+ those pins before using UART1.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 399b53cbab0b377ac4c5c16c19c6e41b68a9c719
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:32 2009 -0400
+
+ 85xx: Add PIB support at CS4/CS5 for MPC8569MDS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Yu Liu <Yu.Liu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fb27949059f1bc84381a6216a819090f0cdbaa70
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Jun 4 16:12:39 2009 -0400
+
+ 85xx: Fix some settings for MPC8569MDS board
+
+ - Increase the size of malloc to 512KB because MPC8569MDS needs more memory for
+ malloc to support up to eight Ethernet interfaces.
+ - Move Environment address out of uboot thus the saved environment variables
+ will not be erased after u-boot is re-programmed.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c7f60fd29f2d638d080cdf1a49ad985b85f9429d
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:30 2009 -0400
+
+ 85xx: Fix MURAM size for MPC8569
+
+ MPC8569 has 128K bytes MURAM.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a53c997dd7fc858f2a27f5a47b200567b9343ae5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 22 20:23:51 2009 +0200
+
+ at91/cpu.c: add missing Copyright & GPL header
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit aa446a591aca46ef2b53cc6598ea8091feb45444
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sun Jun 7 21:45:16 2009 +0900
+
+ apollon: Fix a OBJCFLAGS typo
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit 580611cb0932143fc2d7a735cfa9ce1ef34d6002
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jun 10 00:19:28 2009 +0200
+
+ Prepare 2009.06-rc3
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3a76ab5c166d5956885f803ce975e7151cc0ca0e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jun 10 00:15:11 2009 +0200
+
+ rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 165f9859b64ff59f0cfae3cc70a7e7ded7aaa4a7
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Thu Jun 4 19:44:12 2009 +0200
+
+ ubifs: fix small error path mismatch
+
+ In do_readpage(), don't free 'dn' if its allocation failed.
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+
+commit de7cf709ebd3c01fbd094e8853dabb410c0370a1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jun 4 00:31:07 2009 +0200
+
+ EP88x: fix broken linker script
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Tested-by: Mikhail Zaturenskiy <mzaturenskiy@shoppertrak.com>
+
+commit 7a2063bd80d3b58b2dd5d5e58f4411f8d250576c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 00:16:02 2009 +0200
+
+ TQM85xx: minor config file cleanup
+
+ Remove "saveenv" from "update" definition: the environment is outside
+ the U-Boot image on TQM85xx and therefor not affected by updates.
+
+ Also "beautify" code a bit (vertical alignment).
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c0296b1801fc9426d772fa75fe58458db605dfee
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 00:16:01 2009 +0200
+
+ TQM85xx: adapt for new flash types
+
+ Old TQM85xx boards had 'M' type Spansion Flashes from the S29GLxxxM
+ series while new boards have 'N' type Flashes from the S29GLxxxN
+ series, which have bigger sectors: 2 x 128 instead of 2 x 64 KB.
+
+ We now change the configuration to the new flash types for all
+ boards; this also works on old boards - we just waste two flash
+ sectors for the environment which could be smaller there.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6735104924f06340071a6914a9ee3345607fc102
+Author: Dave Liu <daveliu@freescale.com>
+Date: Mon May 18 17:49:23 2009 +0800
+
+ 85xx: Fix the wrong SYS_CLK_IN for 8569MDS
+
+ The SYS_CLK_IN of MPC8569MDS is 66.66MHz,
+ The DDR_CLK_IN is same with SYS_CLK_IN in 8569 processor.
+ so, change the SYS_CLK_IN from 66MHz to 66.66MHz.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 16e7559c08b6f29db4596d795b92914c01e6a1b3
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri May 15 10:27:44 2009 +0800
+
+ 85xx: Fix the wrong BCSR address of 8569MDS
+
+ The BCSR17[7] = 1 will unlock the write protect of FLASH.
+ The WP# pin only controls the write protect of top/bottom sector,
+ That is why we can save env, but we can't write the first sector
+ before the patch.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 90d13b8ac3d515349626d7c8a3dc34ef38c43fa6
+Author: Fredrik Arnerup <fredrik.arnerup@edgeware.tv>
+Date: Tue Jun 2 16:27:10 2009 -0500
+
+ 85xx: bugfix for reading maximum TLB size on mpc85xx
+
+ The MAXSIZE field in the TLB1CFG register is 4 bits, not 8 bits.
+ This made setup_ddr_tlbs() try to set up a TLB larger than the e500 maximum
+ (256 MB)
+ which made u-boot hang in board_init_f() when trying to create a new stack
+ in RAM.
+ I have an mpc8540 with one 1GB dimm.
+
+ Signed-off-by: Fredrik Arnerup <fredrik.arnerup@edgeware.tv>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1b5291dddf5f16c7ae10e3cb165882fa96038b26
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Mar 27 14:32:43 2009 +0800
+
+ 85xx: Fix the clock adjust of mpc8569mds board
+
+ Currently the clk_adj is 6 (3/4 cycle), The settings will cause
+ the DDR controller hang at the data init. Change the clk_adj
+ from 6 to 4 (1/2 cycle), make the memory system stable.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit faa14babd7466dfade358f9cac128ae246b9bf1b
+Author: RONETIX - Ilko Iliev <iliev@ronetix.at>
+Date: Fri Jun 5 16:54:31 2009 +0200
+
+ at91: fix a USB problem for AT91SAM9261
+
+ This patch corrects the missing PLLB initialization in usb_cpu_init()
+ for AT91SAM9261.
+ Because of the missing PLLB initialization, the USB support for all
+ AT91SAM9261 based boards will work only if the PLLB is configured by a
+ precedent bootloader.
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 0c24dec550ddb7d86b8bfdd8645b18479f73e6e2
+Author: Felix Radensky <felix@embedded-sol.com>
+Date: Sun May 31 20:44:15 2009 +0300
+
+ ppc4xx/net: Fix MDIO clock setup
+
+ This patch fixes MDIO clock setup in case when OPB frequency is 100MHz.
+ Current code assumes that the value of sysinfo.freqOPB is 100000000
+ when OPB frequency is 100MHz. In reality it is 100000001. As a result
+ MDIO clock is set to incorrect value, larger than 2.5MHz, thus violating
+ the standard. This in not a problem on boards equipped with Marvell PHYs
+ (e.g. Canyonlands), since those PHYs support MDIO clocks up to 8.3MHz,
+ but can be a problem for other PHYs (e.g. Realtek ones).
+
+ Signed-off-by: Felix Radensky <felix@embedded-sol.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d65e34d12514de2bbe3b8f519761d641c081bad0
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 14:27:29 2009 +0900
+
+ rtl8169: fix PCI system memory address
+
+ When PCI device use system memory, some PCI host controller should be
+ set physical memory address.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ca9c8a1e10fac01e6a1129f82a7ce18bd818fa43
+Author: Manikandan Pillai <mani.pillai@ti.com>
+Date: Wed Apr 8 09:14:35 2009 +0530
+
+ SMC911x driver fixed for NFS boot
+
+ eth_halt() function in the smc911x drivers used to call the
+ smc911x_reset() function. eth_halt() used to be called after
+ tftp transfers. This used to put the ethernet chip in reset
+ while the linux boots up resulting in the ethernet driver
+ not coming up. NFS boot used to fail as a result.
+
+ This patch calls smc911x_shutdown() instead of smc911x_reset().
+ Some comments received has also been fixed.
+
+ Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e5a3bc2401a23f1890611f020f57f94824a534db
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Sun May 3 12:11:40 2009 +0200
+
+ Add config option for disabling DM9000-SROM support.
+
+ Some boards do not have SROM support for the DM9000 network adapter.
+ Instead of listing these board names in the driver code, make this
+ option configurable from the board config file.
+
+ It also removes a build warning for the at91sam9261ek board:
+ 'dm9000x.c:545: warning: 'read_srom_word' defined but not used'
+
+ And it repaires the trizepsiv board build which was broken around the
+ same routines
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3c9b1ee17e19bd6d80344678d41a85e52b0be713
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Jun 5 14:11:33 2009 -0500
+
+ mpc83xx: don't set SICRH_TSOBI1 to RMII/RTBI operation
+
+ In GMII mode (which operates at 3.3V) both SICRH TSEC1/2 output buffer
+ impedance bits should be clear, i.e., SICRH[TSIOB1] = 0 and SICRH[TSIOB2] = 0.
+ SICRH[TSIOB1] was erroneously being set high.
+
+ U-Boot always operated this PHY interface in GMII mode. It is assumed this
+ was missed in the clean up by the original board porters, and copied along
+ to the TQM and sbc boards.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Acked-by: Ira Snyder <iws@ovro.caltech.edu>
+ Reviewed-by: David Hawkins <dwh@ovro.caltech.edu>
+ Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ CC: Dave Liu <DaveLiu@freescale.com>
+
+commit 2c0234fa79122a5aa77c4e17c33eb2fe184b61a7
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Wed Apr 8 13:23:37 2009 +0200
+
+ smc911x: write back the manually set MAC address
+
+ If the MAX address is given by the environment, write it back to the
+ hardware.
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+ Cc: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit dfcd7f21607fd847236b04bb1a8d59a7c10ab99c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 00:16:03 2009 +0200
+
+ Redundant Environment: protect full sector size
+
+ Several boards used different ways to specify the size of the
+ protected area when enabling flash write protection for the sectors
+ holding the environment variables: some used CONFIG_ENV_SIZE and
+ CONFIG_ENV_SIZE_REDUND, some used CONFIG_ENV_SECT_SIZE, and some even
+ a mix of both for the "normal" and the "redundant" areas.
+
+ Normally, this makes no difference at all. However, things are
+ different when you have to deal with boards that can come with
+ different types of flash chips, which may have different sector
+ sizes.
+
+ Here we may have to chose CONFIG_ENV_SECT_SIZE such that it fits the
+ biggest sector size, which may include several sectors on boards using
+ the smaller sector flash types. In such a case, using CONFIG_ENV_SIZE
+ or CONFIG_ENV_SIZE_REDUND to enable the protection may lead to the
+ case that only the first of these sectors get protected, while the
+ following ones aren't.
+
+ This is no real problem, but it can be confusing for the user -
+ especially on boards that use CONFIG_ENV_SECT_SIZE to protect the
+ "normal" areas, while using CONFIG_ENV_SIZE_REDUND for the
+ "redundant" area.
+
+ To avoid such inconsistencies, I changed all sucn boards that I found
+ to consistently use CONFIG_ENV_SECT_SIZE for protection. This should
+ not cause any functional changes to the code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Paul Ruhland
+ Cc: Pantelis Antoniou <panto@intracom.gr>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Gary Jennejohn <garyj@denx.de>
+ Cc: Dave Ellis <DGE@sixnetio.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit b81830f6e3b3e6ed114d071eb107965e49fa9b5a
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu May 14 14:03:09 2009 +0400
+
+ mmc: it's safe to ignore mmc_send_if_cond() return value
+
+ Return value of mmc_send_if_cond() can be safely ignored (as it is
+ done in Linux). This makes older cards work with MXC MCI controller.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit dba6fcf6517faa5dda7df8109febe03c9c72a6f5
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 11 15:54:13 2009 +0200
+
+ cfi_mtd: Fix bug in last sector detection
+
+ This patch now enabled this cfi-mtd wrapper to correctly detect and
+ erase the last sector in an NOR FLASH device.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4e3d89ba948eef801ffd46ef862cdede5b3f8320
+Author: Yauhen Kharuzhy <jekhor@gmail.com>
+Date: Thu May 7 00:43:30 2009 +0300
+
+ mmc: Fix decoding of SCR & function switch data on little-endian machines
+
+ SCR & switch data are read from card as big-endian words and should be
+ converted to CPU byte order.
+
+ Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit f33cb34b3971dabe3720d577b0e1b8601c09fe17
+Author: Yauhen Kharuzhy <jekhor@gmail.com>
+Date: Thu May 7 13:08:53 2009 +0300
+
+ mmc: Remove return from mmc_init for non SD 2.0 compatible cards.
+
+ Cards which are not compatible with SD 2.0 standard, may return response
+ for CMD8 command, but it will be invalid in terms of SD 2.0. We should
+ accept this case as admissible, just like Linux does.
+
+ Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 998be3dd59ed0af4bec38324047fecfa88ac45db
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:56 2009 +0530
+
+ mmc: drop unnecessary casts
+
+ Now that response is a uint, we can drop all the casts.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit 0b453ffe28bb9227d86ddbe0893bd19c93f04ed7
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:55 2009 +0530
+
+ mmc: fix response decoding on little endian
+
+ The mmc code defines the response as an array of chars. However, it
+ access the response bytes both as (i) an array of four uints (with
+ casts) and (ii) as individual chars. The former case is used more
+ often, including by the driver when it assigns the response.
+
+ The char-wise accesses are broken on little endian systems because they
+ assume that the bytes in the uints are in big endian byte order.
+
+ This patch fixes this by changing the response to be an array of four
+ uints and replacing the char-wise accesses with equivalent uint-wise
+ accesses.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit 9b1f942c09dd942e6de3185caa81c111b14de567
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:54 2009 +0530
+
+ mmc: use lldiv to fix arm eabi build
+
+ The generic MMC core uses direct long long divisions, which do not build
+ with ARM EABI toolchains. Use lldiv() instead, which works everywhere.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit e85649c7e683faea1ccfddc9fa9abc62f38e4201
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:53 2009 +0530
+
+ mmc: check find_mmc_device return value
+
+ find_mmc_device returns NULL if an invalid device number is specified.
+ Check for this to avoid dereferencing NULL pointers.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit ac0865ff33870cdf2cd480165045e1bc311e9fa2
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:52 2009 +0530
+
+ mmc: clean up help texts
+
+ Remove some repeated words and superfluous newlines in the mmc command
+ help entries.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit 7d6900ebe16d679c0e03f8d1584b64057a64ce39
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri May 29 17:01:48 2009 -0400
+
+ Blackfin: spi: fix pin handling of SPI0 SSEL4
+
+ CS4 on SPI0 has a dedicated PH8 pin which needs to be enabled as a
+ peripheral in order to work.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2157359dad2533987f5eb0181ef543693fad6a33
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue May 26 02:51:57 2009 -0400
+
+ Blackfin: fix if() logic in bootrom evt1 check
+
+ A missing set of parenthesis caused the silicon revision to apply only to
+ the BF533 and not the BF531/BF532 variants.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 76b5883da2cf049cd410901c04ea450e5f5c27c3
+Author: Stefan Roese <sr@denx.de>
+Date: Sat May 16 12:04:22 2009 +0200
+
+ jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together
+
+ Currently using JFFS2 with MTDPARTS enabled doesn't work. This is because
+ mtdparts_init() is available in both files, cmd_mtdparts.c and
+ cmd_jffs2.c. Please note that in the original cmd_jffs2.c file (before
+ the jffs2/mtdparts command/file split those 2 different versions
+ already existed. So this is nothing new. The main problem is that the
+ variables "current_dev" and "current_partnum" are declared in both
+ files now. This doesn't work.
+
+ This patch now changes the names of those variable to more specific
+ names: "current_mtd_dev" and "current_mtd_partnum". This is because
+ this patch also changes the declaration from static to global, so
+ that they can be used from both files.
+
+ Please note that my first tests were not successful. The MTD devices
+ selected via mtdparts are now accessed but I'm failing to see the
+ directory listed via the "ls" command. Nothing is displayed. Perhaps
+ I didn't generate the JFFS2 image correctly (I never used JFFS2 in
+ U-Boot before). Not sure. Perhaps somebody else could take a look at
+ this as well. I'll continue looking into this on Monday.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Wolfgang Denk <wd@denx.de>
+ Cc: Detlev Zundel <dzu@denx.de>
+ Cc: Ilya Yanok <yanok@emcraft.com>
+ Cc: Renaud barbier <renaud.barbier@ge.com>
+
+commit ab687907980fa28940a1a992d3f1c5d17cdbbf5d
+Author: Graf Yang <graf.yang@analog.com>
+Date: Sun May 24 02:34:34 2009 -0400
+
+ Blackfin: bf518f-ezbrd: setup portmux for async flash
+
+ The pins for async memory where parallel flash lives are not enabled by
+ default, so make sure we mux them as needed.
+
+ Signed-off-by: Graf Yang <graf.yang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f40f6db278f602b55820693634a7256b0b4e4b80
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 20 10:58:03 2009 +0200
+
+ nand: Fix problem with ECC ordering for PPC4xx NDFC platforms
+
+ This patch enables Smart Media (SMC) ECC byte ordering which is used
+ on the PPC4xx NAND FLASH controller (NDFC). Without this patch we have
+ incompatible ECC byte ordering to the Linux kernel NDFC driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 399aab7748bef053d59612211e1bd7a3fabfce18
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 20 10:58:02 2009 +0200
+
+ ppc4xx: Fix problem with ECC ordering for PPC4xx NDFC platforms
+
+ This patch now uses the correct ECC byte order (Smart Media - SMC)
+ to be used on the 4xx NAND FLASH driver. Without this patch we have
+ incompatible ECC byte ordering to the Linux kernel NDFC driver.
+
+ Please note that we also have to enable CONFIG_MTD_NAND_ECC_SMC in
+ drivers/mtd/nand/nand_ecc.c for correct operation. This is done with
+ a seperate patch.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 5d841fac8249a2b3f9a814da2140132be0a9f60d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 20 10:58:01 2009 +0200
+
+ ppc4xx: Move definition for PPC4xx NAND FLASH controller to header
+
+ This patch moves the definition for the PPC4xx NAND FLASH controller
+ (NDFC) CONFIG_NAND_NDFC into include/ppc4xx.h. This is needed for the
+ upcoming fix for the ECC byte ordering of the NDFC driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 2df72b82bc9e17b88dc82735a067749220beb025
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue May 19 12:53:36 2009 -0500
+
+ common: fix inline--weak error spotted by gcc 4.4
+
+ cmd_ide.c:547: error: inline function 'ide_inb' cannot be declared weak
+
+ removing the inline attribute fixes it.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9fd9abedcc3c10cf89353265cbe05f58609d51f3
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue May 19 12:53:32 2009 -0500
+
+ TQM834x: remove defines causing gcc4.4 warnings
+
+ Configuring for TQM834x board...
+ cpu_init.c: In function 'cpu_init_f':
+ cpu_init.c:262: warning: array subscript is above array bounds
+ cpu_init.c:263: warning: array subscript is above array bounds
+ cpu_init.c:270: warning: array subscript is above array bounds
+ ...
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 0850301747228a3327f2815a85284d26ade3de95
+Author: Andreas Huber <andreas.huber@keymile.com>
+Date: Tue May 19 11:06:30 2009 +0200
+
+ UBI: fix return code in ubi_volume_read
+
+ Return -ENODEV instead of 0 when trying to read from a non existing volume.
+
+ Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ec01481ddc4cf302c7f6d760b776ca94819ec21e
+Author: Graf Yang <graf.yang@analog.com>
+Date: Tue May 19 04:40:08 2009 -0400
+
+ Blackfin: fix timer_init()/timer_reset()
+
+ The timer_init() function was not using the right csync instruction, nor
+ was it doing it right after disabling the core timer.
+
+ The timer_reset() function would reset the timestamp, but not the actual
+ timer, so there was a common edge case where get_timer() return a jump of
+ one timestamp (couple milliseconds) right after resetting. This caused
+ many functions to improperly timeout right away.
+
+ Signed-off-by: Graf Yang <graf.yang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c06326c73bf90e48a8e1cf8893ad31c575423f50
+Author: Shinya Kuribayashi <skuribay@pobox.com>
+Date: Sat May 16 09:12:09 2009 +0900
+
+ MIPS: lib_mips/board.c: Remove unused variables
+
+ This fixes the following build warnings:
+
+ board.c: In function 'board_init_r':
+ board.c:328: warning: unused variable 'i'
+ board.c:326: warning: unused variable 'e'
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit 47f6a36cc3f3427cc8e4f1d0f3e6678be6f33769
+Author: Shinya Kuribayashi <skuribay@pobox.com>
+Date: Sat May 16 09:12:09 2009 +0900
+
+ MIPS: Make all extern-ed functions in bitops.h static
+
+ All these functions are expected to be static inline-ed.
+ This patch also fixes the following build warnings on MIPS targets:
+
+ include/asm/bitops.h: In function 'ext2_find_next_zero_bit':
+ include/asm/bitops.h:862: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static
+ include/asm/bitops.h:885: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static
+ include/asm/bitops.h:887: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit 87423d740b91329b8d1d0b73cafd6930993b558a
+Author: Thomas Lange <thomas@corelatus.se>
+Date: Fri Apr 24 16:22:16 2009 +0200
+
+ MIPS: Implement ethernet halt for au1x00
+
+ Implement ethernet halt() by putting MAC0 in reset.
+ If we do not do this, we will get memory corruption
+ when ethernet frames are received during early OS boot.
+
+ Signed-off-by: Thomas Lange <thomas@corelatus.se>
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit a2e0ffcf2d9a22c582a93e84a4bef20fd3877f47
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 23:29:23 2009 +0200
+
+ Prepare v2009.06-rc2
+
+ Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f4317ea91942f44cc1c433277927b61618e9b0a5
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Tue May 5 12:48:29 2009 +0200
+
+ ARM: fix PXA build by defining UP2OCR
+
+ U-Boot does not currently build for PXA platforms with USB support
+ enabled:
+
+ usb.c:46: error: 'UP2OCR' undeclared (first use in this function)
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+ Cc: Markus Klotzbuecher <mk@denx.de>
+
+ Edited commit message.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e26ad0eabd10a8cda51920fbcfe4da5b4ccf0c98
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 22:32:57 2009 +0200
+
+ Minor Coding Style fix; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit af75a45d23b72a59ac5cc0427696c7f634fdc94b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 09:27:58 2009 +0200
+
+ IDE: bail out of dev_print() for unknown device types
+
+ Commit 574b319512 introduced a subtle bug by mixing a list of tests
+ for "dev_desc->type" and "dev_desc->if_type" into one switch(), which
+ then mostly did not work because "dev_desc->type" cannot take any
+ "IF_*" type values. A later fix in commit 8ec6e332ea changed the
+ switch() into testing "dev_desc->if_type", but at this point the
+ initial test for unknown device types was completely lost, which
+ resulted in output like that for IDE ports without device attached:
+
+ Device 1: Model: Firm: Ser#:
+ Type: # 1F #
+ Capacity: not available
+
+ This patch re-introduces the missing test for unknown device types.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Detlev Zundel <dzu@denx.de>
+ Tested-by: Stefan Roese <sr@denx.de>
+
+commit c21f62d8483fbab44cd98d93ff2e9355a330d225
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 14 07:25:13 2009 +0200
+
+ 74xx_7xx: Fix rounding problem in CPU frequency calculation
+
+ This patch fixes a problem in the CPU frequency calculation. Without it
+ a 798MHz CPU is displayed as 368.503 MHz. And with it it's 798 MHz.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3ad8a0517b724782ab36f2b554a94de4c00c1adb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed May 13 22:24:12 2009 +0200
+
+ console.h: remove unused prototype 'console_realloc'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 84bf7ca522e94ec402a1264b01971b924b7e268f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed May 13 22:16:31 2009 +0200
+
+ api: remove un-needed ifdef CONFIG_API already handle by the Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 792a09eb9d5d8c4f74b7e9f2e887316d511a4e80
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed May 13 10:54:10 2009 +0200
+
+ Fix e-mail address of Gary Jennejohn.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 5e2c08c3ac90808e9be64856916bfd6df984823c
+Author: Emil Medve <Emilian.Medve@Freescale.com>
+Date: Tue May 12 13:48:32 2009 -0500
+
+ Remove inline qualifier from show_boot_progress()
+
+ The 'inline' is conflicting with the semantic of 'weak' attribute and with the
+ way the show_boot_progress() function is used.
+
+ Also gcc 4.4 is complaining about it:
+
+ main.c:51: error: inline function 'show_boot_progress' cannot be declared weak
+
+ Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
+
+commit fe6da4837308aa33d537ac3e7f36c2d66e3d9a36
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue May 12 15:17:35 2009 +0200
+
+ MPC8260: fixup device tree by property instead of path
+
+ cpu/mpc8260/cpu.c used to use do_fixup_by_path_u32() to update the
+ clock frequencies in the device tree, using a CPU path
+ "/cpus/OF_CPU", with OF_CPU beind defined in the board config file.
+
+ However, this does not work when one board config file (here:
+ MPC8260ADS.h) is intended to be used for several diffrent CPUs and
+ therefor contains a generic definition like "cpu@0", as the device
+ trees that will then be loaded will contain specific names like
+ "PowerPC,8272@0".
+
+ We switch to using do_fixup_by_prop_u32() instead, so we can search
+ for device_type="cpu", as it is done in other architectures, too.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Heiko Schocher <hs@denx.de>
+ Acked-by: Heiko Schocher <hs@denx.de>
+ Tested-by: Heiko Schocher <hs@denx.de>
+
+commit 12a6753155716e5c3c181a8f40e8b2d3d669aefd
+Author: Rohit Hagargundgi <h.rohit@samsung.com>
+Date: Mon Mar 9 19:45:46 2009 +0530
+
+ Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN
+
+ Add CONFIG_SYS_MONITOR_LEN macro to apollon board config.
+ CONFIG_SYS_MONITOR_LEN defines the U-Boot image size.
+ and is used by OneNAND ipl when reading U-Boot image.
+
+ Signed-off-by: Rohit Hagargundgi <h.rohit at samsung.com>
+ Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit c404cc5884b0c82fd82d751dbd8e8b3f8919a23a
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Apr 28 17:04:51 2009 -0700
+
+ Schedule removal of non-CONFIG_NET_MULTI net driver API
+
+ This will make CONFIG_NET_MULTI the only net driver configuration and
+ we'll be able to remove this option.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 60bbcf0cc6e55095dd186e59a557d584b9b56eb1
+Author: Detlev Zundel <dzu@denx.de>
+Date: Tue May 5 16:04:06 2009 +0200
+
+ powerpc/inka4x0: Remove left-over ide reset code.
+
+ The pin which was used in preliminary versions of the board for ide
+ reset is really connected to the rtc clock.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit f578a2da6770951239ad91ee9a1875fdc71dbe48
+Author: Marco Stornelli <marco.stornelli@gmail.com>
+Date: Tue Apr 28 19:04:02 2009 +0200
+
+ Add imls utility command
+
+ This patch adds, under tools folder, a new command called imls. Its
+ goal is the same of UBoot's imls but it can be used as Linux shell
+ command. It reads from raw mtd partition and prints the list of the
+ stored images.
+
+ Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
+
+commit da95427ce431908714ae5e9f663ee6e2bc3bcc33
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Apr 28 08:36:11 2009 +0200
+
+ netloop: updates for NetLoop
+
+ Fix some issues introduced from commit:
+ 2f70c49e5b9813635ad73666aa30f304c7fdeda9
+ suggested by Mike Frysinger.
+
+ - added some comment for the env_id variable in common_cmd_nvedit.c
+ - moved some variables in fn scope instead of file scope
+ - NetInitLoop now static void
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3c1d89545de11822f8b5afb5646a57757620bd95
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Apr 28 07:48:39 2009 +0200
+
+ 82xx, ids8247: added ids8247 board to MAKEALL script
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 890a017a8a995c921d1e889d360e8d6538ceecfe
+Author: Detlev Zundel <dzu@denx.de>
+Date: Thu May 7 13:08:55 2009 +0200
+
+ arm/imx31_phycore: Fix bi_arch_number
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ Cc: Sascha Hauer <s.hauer@pengutronix.de>
+
+commit ee47bfabefeb25bdfc83f49ef3bae0f325d3e69e
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Fri May 15 10:21:33 2009 +0200
+
+ remove myself as phycore/litekit Maintainer
+
+ I never acked a patch that adds me as phycore i.MX31 maintainer nor was
+ it me who pushed the patches, so remove myself from the maintainer list
+ so that other people do not longer wait for my ack.
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+
+commit c63254ef5628efe1c77cb2fdba20753f9666f55d
+Author: Sergey Lapin <slapin@ossfans.org>
+Date: Tue May 12 12:25:14 2009 +0400
+
+ AFEB9260 network fix
+
+ AFEB9260 uses PA10, PA11 for ETX2 and ETX3.
+ Also, due to extarnal pull-up on IRQ line, Micrel PHY ID is 1 after reset sequence,
+ not 0.
+
+ Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit f8ddcd58221cab63dd25c2324dd2032487f748b1
+Author: Graf Yang <graf.yang@analog.com>
+Date: Tue May 5 02:26:27 2009 -0400
+
+ Blackfin: bf518f-ezbrd: reset ethernet PHY during init
+
+ We don't know what state the ethernet PHY is in when starting up, so make
+ sure we set it to a sane state. This fixes troubles seen when Linux boots
+ up, configures the PHY is a non-default state, and then the system reboots
+ into U-Boot which previously expected a reset state only.
+
+ Signed-off-by: Graf Yang <graf.yang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 53310b88eaa27fb5cb83144d0b22389190ad87a1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue May 5 01:35:41 2009 -0400
+
+ Blackfin: bf527-ezkit: fix SPI flash env params
+
+ The BF527-EZKIT settings for storing the environment in SPI flash wasn't
+ using the correct sector settings for the SPI flash part that is actually
+ on the board.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f58bf804a14324c6c9186a7a664fa23281780e8b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 24 23:54:19 2009 -0400
+
+ Blackfin: avoid get_sclk() with early serial debug
+
+ When the clock functions were changed to use cached values (and thereby
+ avoiding expensive math functions), early serial debug broke because the
+ baud programming is called before external memory is available.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 02778f2f1b4b1a28b492367477db27c58d45ae35
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 24 23:39:41 2009 -0400
+
+ Blackfin: fix booting with older bootroms (no EVT1)
+
+ When dropping jump block support, the assumption was that all bootroms
+ supported entry point redirection via the EVT1 register. Unfortunately,
+ this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2
+ and older and BF561). No one really noticed earlier because these parts
+ usually are booted by bypassing the bootrom entirely, and older BF533
+ parts are not supported at all (too many anomalies).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit af2c37378f203857d5e6c957e77a14c2da5b59d2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 24 23:22:48 2009 -0400
+
+ Blackfin: recurse with early serial initcode
+
+ Make sure we recurse through serial_putc() rather than bang on the UART
+ transmit register directly to avoid hardware overflows when using \n.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6b8edfde22acc574b5532e9f086e6a7287a9bc78
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 1 21:59:12 2009 +0200
+
+ Prepare v2009.06-rc1
+
+ Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6b2beb5626a143ca5347e7d2c6005be9936c1fbb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 1 15:38:06 2009 +0200
+
+ at91: remove lowlevel_init.S
+
+ lowlevel_init.S is not used any more so remove it.
+ As consequence, we also don't have to generate u-boot.lds
+ but can use a static version as before.
+
+ This also fixes the out-of-tree build problem introduced
+ with commit f0a2c7b4 "at91: add support for the PM9263 board"
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0ee7a310479640ef17ce2fc0f6c13cf7961d2330
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 1 00:16:11 2009 +0200
+
+ Update CHANGELOG; minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d3a513c23ba4100d6983161cdc1f747dfd087bbd
+Author: Manikandan Pillai <mani.pillai@ti.com>
+Date: Tue Apr 21 17:29:05 2009 +0200
+
+ OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
+
+commit ac9140037a84629c5583066ff1a177396c47d89d
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Fri Apr 17 14:27:56 2009 +0200
+
+ OMAP3: Beagle: Set pinmux conditionally for Rev C boards
+
+ The Beagle Rev C boards pull UART2 from an alternate set of balls.
+
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit c1a0fd5f2864e9d381f4a3dc948942cac974e89a
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Apr 27 18:33:33 2009 +0200
+
+ ubifs: BUG: Blocks commpressed with zlib
+
+ Blocks compressed with zlib dont have the full gzip header.
+
+ Without this patch, block compressed with zlib cannot be readed!
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit 35f6a943f7d92145d607c1d55f5c2e2eae5be630
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Apr 27 18:33:32 2009 +0200
+
+ lib_generic: gunzip: New function zunzip
+
+ Separate gunzip in
+
+ gunzip: Find the end of the header and call zunzip.
+ zunzip: Inflate gunzip block without header.
+
+ UBI fs blocks can be compresed in lzo, zlib or no-compression. The
+ current implementation of u-boot supported all the compressions but
+ there was a bug in the implementation of the zlib blocks.
+
+ UBIFS's Zlib blocks do not have header but they were compressed using
+ gunzip, a function used to decompress gunzip files/sectors with a
+ header.
+
+ This patch adds a new function zunzip that uncompress a zlib block with
+ no header.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit a1e5f93185d0d85a4b3fad3b6c743cddcd373b0c
+Author: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+Date: Thu Apr 23 15:37:16 2009 +0200
+
+ at91: fixed plla calc when no USB support is active
+
+ Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3791a1187c1401c33c9512595e6e89dbb46230c5
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Wed Apr 22 01:12:04 2009 +0200
+
+ arm925t: Fix CONFIG_SYS_HZ to 1000
+
+ Let CONFIG_SYS_HZ to have value of 1000 effectively fixing all users of
+ get_timer.
+
+ Changes since original version:
+ * Set PTV=2 (divisor 8) for boards using 12MHz timer clock source to
+ improve timer resolution.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 42bf4b2248146abdc592bde0009c6ea42067f437
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Tue Apr 14 20:15:17 2009 +0200
+
+ OMAP3: Remove legacy NAND defines
+
+ Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit cba0b778dd5f1ea32959b6825c7f0a31501a99d5
+Author: Sanjeev Premi <premi@ti.com>
+Date: Mon Apr 27 21:27:54 2009 +0530
+
+ OMAP3: Print correct silicon revision
+
+ The function display_board_info() displays incorrect
+ silicon revision - based on the return value from
+ function get_cpu_rev().
+
+ This patch fixes the problem.
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit 90006e9b33bcdbf241b0295d186e3634137907a9
+Author: Sanjeev Premi <premi@ti.com>
+Date: Mon Apr 27 21:27:44 2009 +0530
+
+ OMAP3: Remove unused board-types
+
+ The board-types defined in struct omap3_sysinfo seem to be
+ unused. The function display_board_info() is passed
+ board type as an argument; which is ignored.
+
+ This patch removes all uses of board-type, related definitions
+ and functions.
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit 6a6b62e3aa4b340c4f8fc67b1487ddb5436c684d
+Author: Sanjeev Premi <premi@ti.com>
+Date: Mon Apr 27 21:27:27 2009 +0530
+
+ OMAP3: Use functions print_cpuinfo() and checkboard()
+
+ Use the functions print_cpuinfo() and checkboard() to
+ display the cpu and board specific information.
+
+ These functions reuse content from the existing function
+ display_board_info() - which has been removed.
+
+ Also, updated the existig OMAP3 configurations to
+ define:
+ - CONFIG_DISPLAY_CPUINFO
+ - CONFIG_DISPLAY_BOARDINFO
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit f8e2b3107ee00f2782f8ebf47e3f09cda4e2353a
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 18 11:17:37 2009 +0100
+
+ MTD: Change cfi-mtd to accept non-uniform sector sizes
+
+ With this patch non-uniform NOR FLASH chips (chips with multiple erase
+ regions) can be exported via the cfi-mtd layer and therefor used by UBI.
+ We select the largest sector size as erasesize. The cfi driver will make
+ sure that the smaller sectors are handled correctly.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3dcbe628d66b648e954bc8147d4faff2983206d9
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Apr 23 12:35:22 2009 +0200
+
+ video: fix bug in cfb_console.c code
+
+ Fix bug in drawing long version/info strings:
+ U-Boot version string like
+ "U-Boot 2009.03-05647-g7c51e06 (Apr 23 2009 - 12:40:00) MPC83XX"
+ is long and doesn't wrap around correctly while drawing
+ beside the logo. Such long strings partially overwrite
+ the logo. This patch is an attempt to fix it.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 4d9eab89b3b2c2ed432b14d355a56f274d8aac75
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 28 08:50:31 2009 +0200
+
+ cmd_ext2.c: fix compile warnings
+
+ Get rid of these warnings:
+
+ cmd_ext2.c:247: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
+ cmd_ext2.c:248: warning: format '%lX' expects type 'long unsigned int', but argument 3 has type 'int'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 28afe0160f87ff74574150d703055a965f91422a
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Apr 27 10:48:20 2009 +0200
+
+ ids8247: Remove legacy NAND defines
+
+ because legacy NAND support is deprecated converting to current
+ NAND interface. !This just compile, because I have no more the
+ hardware to test it.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit dbd33614404b65aa441c5620c3dbd560c4460c09
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Apr 27 09:13:31 2009 +0200
+
+ ubifs: BUG realpath string must be ended with NULL
+
+ If the memory used to copy the link_make is "dirty" the string wont
+ be ended with NULL, throwing out multiple memory bugs.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 65351a8793c51f3787efbbcf3aa1df0ad543c127
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:59:56 2009 -0500
+
+ bmp_logo: Check return value of fread()
+
+ Add basic error handling to fread() function calls. This prevents
+ compililation warnings such as:
+
+ bmp_logo.c: In function ‘main’:
+ bmp_logo.c:71: warning: ignoring return value of ‘fread’, declared with
+ attribute warn_unused_result
+ ...
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit eea8be86d1c2b570660d1f6c553845e13164231a
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:59:46 2009 -0500
+
+ ncb: Check return value of write()
+
+ This prevents the compilation warning:
+
+ ncb.c: In function 'main':
+ ncb.c:32: warning: ignoring return value of ‘write’, declared with
+ attribute warn_unused_result
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit dbe29e36a4c2775b69b5a63b0ce2bac89c08e691
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 24 15:59:35 2009 +0200
+
+ mtd: nand/onenand: Register mtd device upon device scanning
+
+ With this patch the NAND and OneNAND devices are registered in the MTD
+ subsystem and can then be referenced by the mtdcore code (e.g.
+ get_mtd_device_nm()). This is needed for the new "ubi part" command
+ syntax without the flash type parameter (nor|nand|onenand).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 10bb62d85a0850dbad1fdd34123378686373f166
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 24 15:58:33 2009 +0200
+
+ mtd: nand: Include linux/mtd/partitions.h in nand_base.h
+
+ This patch removes this compilation warning when CONFIG_MTD_PARTITIONS is
+ defined:
+
+ nand_base.c: In function 'nand_release':
+ nand_base.c:2922: warning: implicit declaration of function 'del_mtd_partitions'
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2d579e5060413af5a740cb396dc87e1ff31bf5a9
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 24 20:24:19 2009 +0200
+
+ ubi: Remove flash selection parameter (nor|nand|onenand) from "ubi part"
+
+ This patch removes the now unnecessary flash type parameter from the
+ "ubi part" command. Currently the user has to define the type of flash
+ he will be using UBI on. Example:
+
+ => ubi part nor partition1
+
+ With this patch this type parameter is not needed anymore. The user can
+ now select the partition directly without the flash type paramter.
+ Example:
+
+ => ubi part partition1
+
+ This breaks backward compatibility right now because of the change in the
+ command syntax. But UBI support is still quite fresh and the advantage of
+ this new command is syntax big enough for this change. Additionally the
+ code is much cleaner now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ CC: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 294f10ca9ea82a15e135dcb0fc658382ab206940
+Author: Detlev Zundel <dzu@denx.de>
+Date: Thu Apr 23 13:14:20 2009 +0200
+
+ mips/vcth: Use generic 16550 uart driver
+
+ As the common code also handles baudrate switching, which the board
+ specific vct.c driver did not support, this is one of the rare
+ occassions where deleting code actually adds a feature :)
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+ Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 0c8a84916c5dacccdc5b27b63fc463e9f3b04f07
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Tue Apr 21 02:26:31 2009 +0200
+
+ Separate mtdparts command from jffs2
+
+ On Thu, Mar 19, 2009 at 01:30:36PM +0100, Stefan Roese wrote:
+ > Currently the mtdparts commands are included in the jffs2 command support.
+ > This doesn't make sense anymore since other commands (e.g. UBI) use this
+ > infrastructure as well now. This patch separates the mtdparts commands from
+ > the jffs2 commands making it possible to only select mtdparts when no JFFS2
+ > support is needed.
+
+ One more leftover... Let nboot command know about partitions even if JFFS2
+ support is not enabled.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 67c2e57c0875139dbfcd6f41c43e6ad0cb2e40c9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Apr 20 11:22:13 2009 -0500
+
+ cmd_ide: Remove unused AmigaOneG3SE code
+
+ The output_data_short() and input_data_short() functions for the
+ AmigaOneG3SE are unused and result in compiler warnings.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit c93c102ace00764a56dbdf78bac134a23906721e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Apr 20 11:21:40 2009 -0500
+
+ AmigaOneG3SE: Fix CONFIG_CMD_CONSOLE definition
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 54e822f9590cc6c70411bd8cabd42236e07a2aa7
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Apr 20 11:09:05 2009 -0500
+
+ Replace __asm references with __asm__
+
+ __asm__ follows gcc's documented syntax and is generally more common
+ than __asm. This change is only asthetic and should not affect
+ functionality.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit f9a109b3adc5e8647535357500e2a38f0558b5c2
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Apr 20 11:08:46 2009 -0500
+
+ Replace __attribute references with __attribute__
+
+ __attribute__ follows gcc's documented syntax and is generally more
+ common than __attribute. This change is only asthetic and should not
+ affect functionality.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 08f077da9298ff65cc6f85f90d2770000a1beee9
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Thu Apr 16 19:55:48 2009 -0700
+
+ mtdpart command: align output columns
+
+ Make the headers in the "mtdparts" command output line up
+ with their columns ... strike the extra TAB character.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 06f41f825c23344d889d5419bb5eaeceb3ed2a02
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Thu Apr 16 10:51:03 2009 +0900
+
+ Remove sa1100.h
+
+ sa1100.h is not used anywhere, then remove it.
+
+ $ find . -name '*.h' -empty -print
+ ./include/sa1100.h
+ $ git grep 'sa1100.h' .
+ $
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7d3d30b1b3fbd0a07db254ead99fa6fff4f4d992
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 14 17:51:21 2009 +0200
+
+ UBIFS: Remove tnc_commit.c which is not used in the read-only version
+
+ I missed removing this file while implementing the UBIFS support. It's
+ not referenced at all, so let's remove it. Thanks to Artem Bityutskiy
+ for spotting.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6356daff70867822bdb23cea49f98e65421a25b8
+Author: Adrian Hunter <adrian.hunter@nokia.com>
+Date: Tue Apr 14 17:50:38 2009 +0200
+
+ UBIFS: fix recovery bug
+
+ UBIFS did not recovery in a situation in which it could
+ have. The relevant function assumed there could not be
+ more nodes in an eraseblock after a corrupted node, but
+ in fact the last (NAND) page written might contain anything.
+ The correct approach is to check for empty space (0xFF bytes)
+ from then on.
+
+ Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 351f40caf2f7806b2cefb93e077ea619b9f684e8
+Author: Gao Guanhua <B22826@freescale.com>
+Date: Tue Apr 14 14:37:35 2009 +0800
+
+ fs: Fix the wrong type of var
+
+ The filelen should be signed type, not unsigned type.
+ otherwise, The condition as below never take.
+ if (filelen < 0)
+
+ Signed-off-by: Gao Guanhua <B22826@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 05f474c4d0469bebc0bb05df60a39dc7fdf28e62
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 28 00:29:34 2009 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ad74cae9ff8790727bc81ee91c6bca7d50dca446
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Thu Apr 16 23:15:15 2009 -0700
+
+ dm9000 EEPROM reading bugfix
+
+ Make the U-Boot dm9000 driver read addresses from EEPROM just
+ like Linux does ... read six bytes, instead of reading twelve
+ bytes and then discarding every other one.
+
+ Using the right Ethernet address is a big win.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d4c02e6f5d49880123e7f584b88f857ffd874381
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 14:27:24 2009 +0900
+
+ rtl8169: fix cache coherency problem
+
+ Fix the problem that cannot access actual data when CPU data cache enabled.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Tested-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a85693b3bd4431b05b7df608b6f7733c0f80c53e
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Tue Apr 21 17:30:51 2009 +0200
+
+ OMAP3: Fix changed mmc init command
+
+ In recent U-Boot mmcinit changed to mmc init.
+
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 34b76a14f676bc6501c27a96564e4dfb4793f033
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 26 20:39:26 2009 +0200
+
+ lib_arm/board.c: remove misleading "test-only" comment.
+
+ For a long time, the print_cpuinfo() declaration in lib_arm/board.c
+ had been marked as "test-only", which is plain wrong considering
+ current usage. Delete this misleading comment.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7239c5da5e9197accb3dfe395be4502c3b9bca8e
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Sun Apr 12 15:40:16 2009 -0700
+
+ minor DaVinci clock cleanup
+
+ Minor cleanup to clock-related defines for DaVinci DM6446 boards:
+
+ - CONFIG_SYS_CLK_FREQ is unused; remove it.
+
+ - CONFIG_SYS_NS16550_CLK must be the same as CONFIG_SYS_HZ_CLOCK
+
+ On DM6446 both of those peripheral clocks actually come from the
+ same source, the primary oscillator. Having them use the same
+ symbol avoids bugs in the clone'n'modify development cycle.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit ffd8c7170d55c34bbfcfd2c84093dcaff796cbf3
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Mon Apr 6 19:59:29 2009 +0900
+
+ s3c64xx: remove unnecessary definition
+
+ CONFIG_S3C6400 is must defined at config header file
+ That definition is unnecessary at this file
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 14b9308d511b53042ef478936e367a67282df66a
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Apr 24 06:50:45 2009 +0200
+
+ 83xx: searching "muram-data" by compatible property
+
+ if using CONFIG_BOOTCOUNT_LIMIT feature on a MPC8360 CPU
+ in the muram-data node, the reg entry needs to be updated.
+ This is done in fdt_fixup_muram(), but we should use
+ the compatible "fsl,qe-muram-data" for searching the
+ node instead of searching the muram-data node with
+ an absolute path.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8e15088794807944b221c11609d36789efc7f767
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Apr 23 21:29:34 2009 +0200
+
+ mpc83xx: MPC8360ERDK: fix environment offset configuration bug
+
+ The size of U-Boot binary for MPC8360ERDK increased
+ (> 2 flash sectors now), so 'saveenv' will partially
+ overwrite U-Boot in flash and will brick the board.
+ This patch moves environment offset to fourth flash
+ sector and also fixes CONFIG_SYS_MONITOR_LEN.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3c172c4fdbbb5858fae38478d6399be4a16be3fc
+Author: Michael Zaidman <michael.zaidman@gmail.com>
+Date: Sat Apr 4 01:43:00 2009 +0300
+
+ NetLoop initialization bug
+
+ The patch fixes the bug of partial initialization of global network
+ parameters.
+
+ Upon u-boot's start up the first ping command causes a failure of the
+ consequent TFTP command. It happens in the recently added mechanism of
+ the NetLoop initialization where initialization of global network
+ parameters is separated in the NetInitLoop routine which is called per
+ env_id change. Thus, ping request will initialize the network parameters
+ necessary for ping operation only, afterwards the env_changed_id will be
+ set to the env_id that will prevent all following initialization requests
+ from other protocols.
+ The problem is that the initialized by ping subset of network parameters
+ is not sufficient for other protocols and particularly for TFTP which
+ requires the NetServerIp also.
+
+ Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b11f664f52c2855990107c18f242223377183575
+Author: Timur Tabi <timur@freescale.com>
+Date: Thu Apr 9 10:27:05 2009 -0500
+
+ net: fix ULI 526x macro usage in netdev.h
+
+ Change netdev.h to use CONFIG_ULI526X instead of CONFIG_ULI526. CONFIG_ULI526X
+ is used everywhere else, so that's the correct macro name. Without this fix,
+ Ethernet will not work on the Freescale MPC8610 HPCD.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 7ee38c044ca5041d3378d6507580ea4ec344af96
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Sun Apr 12 15:38:06 2009 -0700
+
+ fix DaVinci NS16550_REG_SIZE regression
+
+ Update the DaVinci DM6446 boards to use the new convention
+ for CONFIG_SYS_NS16550_REG_SIZE ... the size hasn't changed
+ from the original 4 bytes, but these chips are little-endian.
+
+ (Resolves a regression added recently by the include/ns16550.h
+ patch to "Unify structure declaration for registers". The code
+ previously worked just fine because the registers were accessed
+ as host-endian words, not as bytes.)
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit dfc99e143fca44a492918ac6cf3f76ee9c2473a9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Apr 12 22:29:20 2009 -0400
+
+ cmd_nand: drop duplicate NULL ptr check
+
+ The first if statement checks for NULL ptrs, so there is no need to check
+ it again in later else cases (such as .oob).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Scott Wood <scottwood@freescale.com>
+
+commit 7732cef2eeb4e339cfcd8553fab773af73a20805
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Mon Apr 13 08:03:38 2009 -0700
+
+ CMD_UBI != MTD_PARTITIONS
+
+ Fix dependency goofage: it should certainly be possible to have the
+ partition support without bringing in UBI commands.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 6ebff365eb63093ca35b687316002535c6a18820
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Apr 16 21:30:48 2009 +0200
+
+ at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000
+
+ The timer has been rewrote with a precision at ~0,18%
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Tested-by: Sergey Lapin <slapin@ossfans.org>
+ Tested-by: Eric BENARD <ebenard@free.fr>
+
+commit f0a2c7b4b64eacd06bb272856bcc056be8719f5a
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Thu Apr 16 21:30:48 2009 +0200
+
+ at91: add support for the PM9263 board of Ronetix GmbH
+
+ The PM9263 board is based on the AT91SAM9263-EK board.
+
+ Here is the page on Ronetix website:
+ http://www.ronetix.at/starter_kit_9263.html
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit dc39ae9513c32dfeb9e018dc0d22c6484514fefb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Apr 16 21:30:44 2009 +0200
+
+ at91sam9/at91cap: improve clock framework
+
+ calculate dynamically the clock rate and pllb setting for usb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit dd7c302099ef5590069bdbf292aaa8230cd59de7
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 15 14:08:48 2009 +0200
+
+ ppc4xx: Disable POST memory test on NAND-booting Kilauea
+
+ Don't run the memory POST on the NAND-booting version. It will
+ overwrite part of the U-Boot image which is already loaded from NAND
+ to SDRAM. We were just lucky that it booted at all with this SDRAM
+ test enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9a929170be89b27bce677504da27e88600c06c49
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 15 14:06:26 2009 +0200
+
+ ppc4xx: Disable POST memory test on NAND-booting Sequoia
+
+ Don't run the memory POST on the NAND-booting version. It will
+ overwrite part of the U-Boot image which is already loaded from NAND
+ to SDRAM. We were just lucky that it booted at all with this SDRAM
+ test enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 17c1b0e89b8be7d90f605eb19af9218c6275bfb3
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 15 11:32:53 2009 +0200
+
+ ppc4xx: Remove unused code for Sequoia NAND booting version
+
+ The current define of get_bus_freq() in the CONFIG_NAND_SPL #ifdef is not
+ used at all. This patch changes it's define to the currently used value of
+ 133333333 and removes the unnecessary code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cf9409885cbe01405bad76790e99f8adf3351f4d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 15 10:50:48 2009 +0200
+
+ ppc4xx: Add "booting from NAND" to 4xx NAND-booting targets
+
+ This additional text in the bootup log helps to see if the board is
+ configured for NAND-booting. Especially helpful for boards that can
+ boot from NOR and NAND (e.g. most of the AMCC eval boards).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5132106a27b8fb302677852b26ffd319b40d17e2
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 8 10:36:22 2009 +0200
+
+ ppc4xx: Fixup chip-selects in dtb for NAND-booting Sequoia
+
+ Currently the NOR & NAND support in Linux only works for the "standard"
+ Sequoia, the version booting for NOR flash. The NAND-booting version
+ has the chip-selects swapped. Here the chip-select mappings:
+
+ "Standard" NOR-booting version:
+ CS0 NOR
+ CS3 NAND
+
+ NAND-booting version:
+ CS0 NAND
+ CS3 NOR
+
+ With this path the dtb gets fixed-up, so that the correct chip-select
+ numbers are patched in the dtb enabling correct NOR & NAND support
+ in Linux on the NAND-booting Sequoia version.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit aad4eca4ba8d597747199d8af723426681557dda
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 09:10:27 2009 -0400
+
+ Blackfin: audit UART for all known anomalies
+
+ There is no code change here, just new comments, but this keeps me from
+ having to do another audit from scratch in the future.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8ef929afa43c77c9573caa57c6e17a97a33775c0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:40:13 2009 -0400
+
+ Blackfin: add check for anomaly 05000362
+
+ DESCRIPTION:
+ The column address width settings for banks 2 and 3 are misconnected in
+ the SDRAM controller. Accesses to bank 2 will result in an error if the
+ Column Address Width for bank 3 (EB3CAW ) is not set to be the same as
+ that of bank 2.
+
+ WORKAROUND:
+ If using bank 2, make sure that banks 2 and 3 have the same column address
+ width settings in the EBIU_SDBCTL register. This must be the case
+ regardless of whether or not bank 3 is enabled.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c2e07449f546fb375289cdac1a608fdc20357873
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:29:55 2009 -0400
+
+ Blackfin: add comment about anomaly 05000430 avoidance
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 48ab1509254a4c175e4f65c478a978928ffe09ec
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:10:22 2009 -0400
+
+ Blackfin: add workaround for anomaly 05000242
+
+ DESCRIPTION:
+ If the DF bit is set prior to a hardware reset, the PLL will continue to
+ divide CLKIN by 2 after the hardware reset, but the DF bit itself will be
+ cleared in the PLL_CTL register.
+
+ WORKAROUND:
+ Reprogram the PLL with DF cleared if the desire is to not divide CLKIN by
+ 2 after reset.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ce1fe4ba6bb9df7c57351436fa17d1af8bbe7916
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:09:24 2009 -0400
+
+ Blackfin: add workaround for anomaly 05000171
+
+ DESCRIPTION:
+ The Boot ROM is executed at power up/reset and changes the value of the
+ SICA_IWR registers from their default reset value of 0xFFFF, but does not
+ restore them.
+
+ WORKAROUND:
+ User code should not rely on the default value of these registers. Set
+ the desired values explicitly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 51ee6e057f7a920e2a125cd9f985d10f625e355f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:22:36 2009 -0400
+
+ Blackfin: update anomaly sheets
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a343ba87ea0320ca0a4ecfa2c42cd9d4f18883df
+Author: Graf Yang <graf.yang@analog.com>
+Date: Sat Apr 4 07:45:57 2009 -0400
+
+ Blackfin: nand: flush peripheral before polling it
+
+ We need to make sure the data written to the nand flash controller makes
+ it there before we start polling its status register. Otherwise, we may
+ get stale data and return before the controller is actually ready.
+
+ Signed-off-by: Graf Yang <graf.yang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 3ccbfb25f48af78e7092ac75f3115e924e76c748
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Sun Apr 5 11:43:28 2009 +0200
+
+ Support for PXA27X UDC.
+
+ This Patch adds Support for PXA27X UDC.
+ (Rebased to drivers/usb reorganisation)
+
+ Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 2731b9a86685190d26b1883f27afda5ac8e1a313
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Apr 3 12:46:58 2009 +0200
+
+ drivers/usb: regorganisation
+
+ move to linux usb driver organisation
+
+ as following
+
+ drivers/usb/gadget
+ drivers/usb/host
+ drivers/usb/musb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit d04371a116d102e587ba7aa4c329b441cdbea3f4
+Author: Todor I Mollov <tmollov@ucsd.edu>
+Date: Sat Apr 4 06:53:06 2009 -0400
+
+ Blackfin: spi: make cs deassert function deterministic
+
+ Blackfin SPI driver was not driving the SPI chip-select high before
+ putting the chip-select signals into tri-state mode. This is probably
+ something that slipped by unnoticed in most designs. If the signals are
+ put directly into a tri-state mode, then the board is relying on the
+ pull-up resistors to pull up the chip-select before the next transaction.
+ Most of the time this is fine, except when you have two transactions that
+ follow each other very closely, such as the flash erase and read status
+ register commands. In this case I was seeing a 500ns separation between
+ the transactions. In my setup, with a 10kOhm pull-up, it would meet
+ timing spec about half the time and resulted in intermittent errors. (A
+ stronger pull up would fix this, but our design is targeted for low power
+ consumption and a 3.3kOhm @ 3.3v is 3.3mW of needless power consumption.)
+ I modified the spi_cs_deactivate() function in bfin_spi.c to drive the
+ chip-selects high before putting them into tri-state. For me, this
+ resulted in a rise time of 5ns instead of the previous rise time of about
+ 1us, and fully satisfied the timing spec of the chip.
+
+ Signed-off-by: Todor I Mollov <tmollov@ucsd.edu>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c6fadb9c73a6a3e0c7f20696e978304a593a8d2d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 13 21:08:05 2008 +0100
+
+ integratorap: fix PCI support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1c397508c836dfcb01fb2471c71de0727051f117
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Mon Mar 30 21:15:23 2009 +0200
+
+ OMAP3: Update Overo pin mux for new expansion board
+
+ A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and
+ switches. This patch changes the pinmux configuration for those pins.
+ They were previously set up for unused MMC3_DAT4-7.
+
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit ab298231518675b3784aea88ee9b978438f99e63
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Apr 5 13:08:03 2009 +0200
+
+ arm: unify reset command
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b3acb6cd4059dfb29a5e99095d802717f53ff784
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Apr 5 13:06:31 2009 +0200
+
+ arm: clean cache management
+
+ unify arm cache management except for non standard cache as ARM7TDMI
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 677e62f43235de9a1701204d7bcea0fb3d233fa1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Apr 5 13:02:43 2009 +0200
+
+ arm: update co-processor 15 access
+
+ import system.h from linux
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 23e4af49e066a53cd3e3659b68ef90572d88de84
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Apr 5 00:42:02 2009 +0200
+
+ ARM: add the imx31_phycore_eet target to MAINTAINERS
+
+ imx31_phycore_eet is a variant of the imx31_phycore board with a few
+ extensions, which justifies a separate entry in the MAINTAINERS list,
+ whereas normally all entries sharing a single configuration file and a
+ board/ directory have only one entry in MAINTAINERS.
+
+ Reported-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 69c5bf29908b3a7f8e23bd9891b7ecc5b21f23e5
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Apr 5 00:37:07 2009 +0200
+
+ ARM: fix out-of-tree build of imx31_phycore_eet
+
+ Fix out-of-tree build of the imx31_phycore_eet target.
+
+ Reported-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 3c853f31d6a8e4407f73a2ca2c63d383a245f237
+Author: Jon Smirl <jonsmirl@gmail.com>
+Date: Sat Apr 4 17:44:51 2009 -0400
+
+ mpc5200: reduce delays in i2c
+
+ The previous code waited 1000us before checking i2c
+ status. Measurement shows i2c is usually ready in
+ under 50us. Change the polling interval to 15us,
+ loop 6,667 times to keep the polling timeout constant
+ at 100ms.
+
+commit 36003268968949110ef145d9f2eaf8439c96d25b
+Author: Sanjeev Premi <premi@ti.com>
+Date: Fri Apr 3 14:00:07 2009 +0530
+
+ OMAP: Fix compile issue
+
+ Fixes this compile error:
+ board.c: In function 'do_switch_ecc':
+ board.c:339: error: 'cmd_tbl_t' has no member named 'help'
+ make[1]: *** [board.o] Error 1
+ make[1]: Leaving directory `/db/psp_git/users/a0756819/u-boot/cpu/arm_cortexa8/omap3'
+ make: *** [cpu/arm_cortexa8/omap3/libomap3.a] Error 2
+
+ This is due to the fact that current command uses long
+ help for the usage print even if the CONFIG_SYS_LONGHELP
+ is not enabled. (Thanks Jean-Christophe for explanation).
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit 342c1a5d9ab74febf3226a86216dc5aa05295d46
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Fri Apr 3 09:56:16 2009 +0900
+
+ s3c64xx: fix the wrong gpio offset
+
+ This patch fix the wrong gpio offset
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit ab0689c316c9b2ee33f4de1c50263b64e539f12a
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Wed Nov 26 10:18:13 2008 +0900
+
+ Move machine specific code to board at s3c64xx (v2)
+
+ Move machine specific code to smdk6400.
+ Some board use OneNAND instead of NAND.
+
+ Some register MP0_CS_CFG[5:0] are controled by both h/w and s/w.
+ So it's better to use macro instead of hard-coded value.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 767f3acd9f6e1dcb8ada926c333945382eddc7e8
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Wed Apr 1 22:02:19 2009 -0500
+
+ ZOOM1 Remove legacy NAND defines
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 5891151707ee5902fe62d554c247f42865815757
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Wed Apr 1 22:02:20 2009 -0500
+
+ OMAP3 Fix multiline formatting in board init files.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit c0a14aedc3440d6591b8c86d45861a0a8b46e11d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 5 00:27:57 2009 +0200
+
+ Update CHANGELOG, coding style cleanup.
+
commit f63728c804ab7413a67d70f6774cd30c3f7b40fb
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Apr 5 00:18:44 2009 +0200
projects / karo-tx-uboot.git / blobdiff