omap3/cpu.h: add BCH support

[karo-tx-uboot.git] / Makefile

diff --git a/Makefile b/Makefile
index 8f01ff4e0f10bf7601363f7ebe2f4ec3637067a0..4ede9379d14c97aca2951dd98a61547cb6841a1d 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -22,9 +22,9 @@
 #
 
 VERSION = 2013
-PATCHLEVEL = 01
+PATCHLEVEL = 04
 SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc1
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -273,6 +273,7 @@ LIBS-y += disk/libdisk.o
 LIBS-y += drivers/bios_emulator/libatibiosemu.o
 LIBS-y += drivers/block/libblock.o
 LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o
+LIBS-y += drivers/crypto/libcrypto.o
 LIBS-y += drivers/dma/libdma.o
 LIBS-y += drivers/fpga/libfpga.o
 LIBS-y += drivers/gpio/libgpio.o
@@ -331,7 +332,7 @@ LIBS-y += api/libapi.o
 LIBS-y += post/libpost.o
 LIBS-y += test/libtest.o
 
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
 LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
 endif
 
@@ -464,8 +465,8 @@ $(obj)u-boot.img:   $(obj)u-boot.bin
                        sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
                -d $< $@
 
-$(OBJTREE)/u-boot.imx : $(obj)u-boot.bin $(SUBDIR_TOOLS) depend
-               $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@
+$(obj)u-boot.imx: $(obj)u-boot.bin depend
+               $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $(OBJTREE)/u-boot.imx
 
 $(obj)u-boot.kwb:       $(obj)u-boot.bin
                $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
@@ -556,10 +557,8 @@ GEN_UBOOT = \
                        $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
 else
 GEN_UBOOT = \
-               UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
-               sed  -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\
                cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
-                       $$UNDEF_LST $(__OBJS) \
+                       $(__OBJS) \
                        --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
                        -Map u-boot.map -o u-boot
 endif
@@ -592,11 +591,7 @@ $(SUBDIR_EXAMPLES): $(obj)u-boot
 $(LDSCRIPT):   depend
                $(MAKE) -C $(dir $@) $(notdir $@)
 
-# The following line expands into whole rule which generates u-boot.lst,
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS)))
-$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst
+$(obj)u-boot.lds: $(LDSCRIPT)
                $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 nand_spl:      $(TIMESTAMP_FILE) $(VERSION_FILE) depend
@@ -832,7 +827,6 @@ clean:
               $(obj)board/matrix_vision/*/bootscript.img                 \
               $(obj)board/voiceblue/eeprom                               \
               $(obj)u-boot.lds                                           \
-              $(obj)include/u-boot.lst                                   \
               $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]          \
               $(obj)arch/blackfin/cpu/init.{lds,elf}
        @rm -f $(obj)include/bmp_logo.h
@@ -870,7 +864,7 @@ clobber:    tidy
        @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
        @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
        @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
-       @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
+       @rm -f $(obj)spl/u-boot-spl.lds
        @rm -f $(obj)MLO MLO.byteswap
        @rm -f $(obj)SPL
        @rm -f $(obj)tools/xway-swap-bytes