powerpc/qixis: enable qixis dump command and add switch dumping command

[karo-tx-uboot.git] / Makefile

diff --git a/Makefile b/Makefile
index bf9a9378dafd622ffcdf995f97c80b5650701405..51bd918475c513c29b282ef8a434946ebeacde70 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -24,7 +24,7 @@
 VERSION = 2013
 PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -316,6 +316,7 @@ LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
 endif
 LIBS-y += drivers/rtc/librtc.o
 LIBS-y += drivers/serial/libserial.o
+LIBS-y += drivers/sound/libsound.o
 LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o
 LIBS-y += drivers/twserial/libtws.o
 LIBS-y += drivers/usb/eth/libusb_eth.o
@@ -390,12 +391,12 @@ __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
 BOARD_SIZE_CHECK = \
        @actual=`wc -c $@ | awk '{print $$1}'`; \
-       limit=$(CONFIG_BOARD_SIZE_LIMIT); \
+       limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
        if test $$actual -gt $$limit; then \
-               echo "$@ exceeds file size limit:"; \
-               echo "  limit:  $$limit bytes"; \
-               echo "  actual: $$actual bytes"; \
-               echo "  excess: $$((actual - limit)) bytes"; \
+               echo "$@ exceeds file size limit:" >&2 ; \
+               echo "  limit:  $$limit bytes" >&2 ; \
+               echo "  actual: $$actual bytes" >&2 ; \
+               echo "  excess: $$((actual - limit)) bytes" >&2; \
                exit 1; \
        fi
 else
@@ -485,8 +486,12 @@ $(obj)u-boot.sha1: $(obj)u-boot.bin
 $(obj)u-boot.dis:      $(obj)u-boot
                $(OBJDUMP) -d $< > $@
 
+
+
 $(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
-               $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
+               $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(or $(CONFIG_SPL_PAD_TO),0) \
+                       -O binary $(obj)spl/u-boot-spl \
+                       $(obj)spl/u-boot-spl-pad.bin
                cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
                rm $(obj)spl/u-boot-spl-pad.bin
 
@@ -510,7 +515,7 @@ $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
 ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
 
 $(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
-               elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
+               elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
                        -o $(obj)u-boot.sb
 
 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
@@ -544,6 +549,9 @@ $(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtb
                rm $(obj)spl/u-boot-spl-pad.bin
 endif
 
+$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+               cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
+
 ifeq ($(CONFIG_SANDBOX),y)
 GEN_UBOOT = \
                cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
@@ -865,7 +873,8 @@ clobber:    tidy
        @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
        @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
        @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
-       @rm -f $(obj)MLO
+       @rm -f $(obj)MLO MLO.byteswap
+       @rm -f $(obj)SPL
        @rm -f $(obj)tools/xway-swap-bytes
        @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
        @rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c