tools/imagetool: remove linker script

[karo-tx-uboot.git] / Makefile

diff --git a/Makefile b/Makefile
index ea5ae8fac72f3b0c8f1c7807b4fc4dfaeca15ea1..72fedc22dd538bf72f38ee68791bd30080800ab6 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2015
-PATCHLEVEL = 01
+PATCHLEVEL = 04
 SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc1
 NAME =
 
 # *DOCUMENTATION*
@@ -281,6 +281,11 @@ os_x_before        = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
 HOSTCC       = $(call os_x_before, 10, 5, "cc", "gcc")
 HOSTCFLAGS  += $(call os_x_before, 10, 4, "-traditional-cpp")
 HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
+
+# since Lion (10.7) ASLR is on by default, but we use linker generated lists
+# in some host tools which is a problem then ... so disable ASLR for these
+# tools
+HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
 endif
 
 # Decide whether to build built-in, modular, or both.
@@ -729,8 +734,9 @@ ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
 endif
 ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
 
-# We can't do this yet due to the need for binary blobs
-# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+ifneq ($(BUILD_ROM),)
+ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+endif
 
 # enable combined SPL/u-boot/dtb rules for tegra
 ifneq ($(CONFIG_TEGRA),)
@@ -776,6 +782,13 @@ ifneq ($(CONFIG_SYS_GENERIC_BOARD),y)
        @echo "See doc/README.generic-board for further information"
        @echo "===================================================="
 endif
+ifeq ($(CONFIG_DM_I2C_COMPAT),y)
+       @echo "===================== WARNING ======================"
+       @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
+       @echo "(possibly in a subsequent patch in your series)"
+       @echo "before sending patches to the mailing list."
+       @echo "===================================================="
+endif
 
 PHONY += dtbs
 dtbs dts/dt.dtb: checkdtc u-boot
@@ -849,12 +862,18 @@ MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
 MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
        -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
 
+MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
+       -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
+
 MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
                -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
 
 u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
        $(call if_changed,mkimage)
 
+u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
+       $(call if_changed,mkimage)
+
 MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
 
 u-boot-dtb.img: u-boot-dtb.bin FORCE
@@ -905,9 +924,12 @@ u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
 
 u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
        $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
-u-boot.sb: u-boot.bin spl/u-boot-spl.bin
+u-boot.sb: u-boot.bin spl/u-boot-spl.bin elftosb
        $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
 
+elftosb:
+       $(MAKE) -C $(KBUILD_SRC)/tools/elftosb all
+
 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
 # Both images are created using mkimage (crc etc), so that the ROM
 # bootloader can check its integrity. Padding needs to be done to the