sama5d3xek: enable PMECC header generation

[karo-tx-uboot.git] / README

diff --git a/README b/README
index 49dcd37a3c859484247e764b3a8551b9f6bfc787..a280435e9fbec65012cf9758a66f6827d2f22353 100644 (file)
--- a/README
+++ b/README
@@ -132,6 +132,10 @@ Directory Hierarchy:
 ====================
 
 /arch                  Architecture specific files
 ====================
 
 /arch                  Architecture specific files

+  /arc                 Files generic to ARC architecture
+    /cpu               CPU specific files
+      /arc700          Files specific to ARC 700 CPUs
+    /lib               Architecture specific library files

   /arm                 Files generic to ARM architecture
     /cpu               CPU specific files
       /arm720t         Files specific to ARM 720 CPUs
   /arm                 Files generic to ARM architecture
     /cpu               CPU specific files
       /arm720t         Files specific to ARM 720 CPUs


@@ -164,7 +168,7 @@ Directory Hierarchy:
   /mips                        Files generic to MIPS architecture
     /cpu               CPU specific files
       /mips32          Files specific to MIPS32 CPUs
   /mips                        Files generic to MIPS architecture
     /cpu               CPU specific files
       /mips32          Files specific to MIPS32 CPUs

-      /xburst          Files specific to Ingenic XBurst CPUs
+      /mips64          Files specific to MIPS64 CPUs

     /lib               Architecture specific library files
   /nds32               Files generic to NDS32 architecture
     /cpu               CPU specific files
     /lib               Architecture specific library files
   /nds32               Files generic to NDS32 architecture
     /cpu               CPU specific files


@@ -260,6 +264,17 @@ e.g. "make cogent_mpc8xx_config". And also configure the cogent
 directory according to the instructions in cogent/README.
 
 
 directory according to the instructions in cogent/README.
 
 

+Sandbox Environment:
+--------------------
+
+U-Boot can be built natively to run on a Linux host using the 'sandbox'
+board. This allows feature development which is not board- or architecture-
+specific to be undertaken on a native platform. The sandbox is also used to
+run some of U-Boot's tests.
+
+See board/sandbox/sandbox/README.sandbox for more details.
+
+

 Configuration Options:
 ----------------------
 
 Configuration Options:
 ----------------------
 


@@ -436,6 +451,12 @@ The following options need to be configured:
                supported, core will start to execute uboot when wakes up.
 
 - Generic CPU options:
                supported, core will start to execute uboot when wakes up.
 
 - Generic CPU options:

+               CONFIG_SYS_GENERIC_GLOBAL_DATA
+               Defines global data is initialized in generic board board_init_f().
+               If this macro is defined, global data is created and cleared in
+               generic board board_init_f(). Without this macro, architecture/board
+               should initialize global data before calling board_init_f().
+

                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
                Defines the endianess of the CPU. Implementation of those
                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
                Defines the endianess of the CPU. Implementation of those


@@ -736,6 +757,10 @@ The following options need to be configured:
                boot loader that has already initialized the UART.  Define this
                variable to flush the UART at init time.
 
                boot loader that has already initialized the UART.  Define this
                variable to flush the UART at init time.
 

+               CONFIG_SERIAL_HW_FLOW_CONTROL
+
+               Define this variable to enable hw flow control in serial driver.
+               Current user of this option is drivers/serial/nsl16550.c driver

 
 - Console Interface:
                Depending on board, define exactly one serial port
 
 - Console Interface:
                Depending on board, define exactly one serial port


@@ -1480,13 +1505,6 @@ The following options need to be configured:
                        for your device
                        - CONFIG_USBD_PRODUCTID 0xFFFF
 
                        for your device
                        - CONFIG_USBD_PRODUCTID 0xFFFF
 

-               Some USB device drivers may need to check USB cable attachment.
-               In this case you can enable following config in BoardName.h:
-                       CONFIG_USB_CABLE_CHECK
-                       This enables function definition:
-                       - usb_cable_connected() in include/usb.h
-                       Implementation of this function is board-specific.
-

 - ULPI Layer Support:
                The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via
                the generic ULPI layer. The generic layer accesses the ULPI PHY
 - ULPI Layer Support:
                The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via
                the generic ULPI layer. The generic layer accesses the ULPI PHY


@@ -1516,6 +1534,16 @@ The following options need to be configured:
                        CONFIG_SH_MMCIF_CLK
                        Define the clock frequency for MMCIF
 
                        CONFIG_SH_MMCIF_CLK
                        Define the clock frequency for MMCIF
 

+               CONFIG_GENERIC_MMC
+               Enable the generic MMC driver
+
+               CONFIG_SUPPORT_EMMC_BOOT
+               Enable some additional features of the eMMC boot partitions.
+
+               CONFIG_SUPPORT_EMMC_RPMB
+               Enable the commands for reading, writing and programming the
+               key for the Replay Protection Memory Block partition in eMMC.
+

 - USB Device Firmware Update (DFU) class support:
                CONFIG_DFU_FUNCTION
                This enables the USB portion of the DFU USB class
 - USB Device Firmware Update (DFU) class support:
                CONFIG_DFU_FUNCTION
                This enables the USB portion of the DFU USB class


@@ -1561,6 +1589,28 @@ The following options need to be configured:
                entering dfuMANIFEST state. Host waits this timeout, before
                sending again an USB request to the device.
 
                entering dfuMANIFEST state. Host waits this timeout, before
                sending again an USB request to the device.
 

+- USB Device Android Fastboot support:
+               CONFIG_CMD_FASTBOOT
+               This enables the command "fastboot" which enables the Android
+               fastboot mode for the platform's USB device. Fastboot is a USB
+               protocol for downloading images, flashing and device control
+               used on Android devices.
+               See doc/README.android-fastboot for more information.
+
+               CONFIG_ANDROID_BOOT_IMAGE
+               This enables support for booting images which use the Android
+               image format header.
+
+               CONFIG_USB_FASTBOOT_BUF_ADDR
+               The fastboot protocol requires a large memory buffer for
+               downloads. Define this to the starting RAM address to use for
+               downloaded images.
+
+               CONFIG_USB_FASTBOOT_BUF_SIZE
+               The fastboot protocol requires a large memory buffer for
+               downloads. This buffer should be as large as possible for a
+               platform. Define this to the size available RAM for fastboot.
+

 - Journaling Flash filesystem support:
                CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
                CONFIG_JFFS2_NAND_DEV
 - Journaling Flash filesystem support:
                CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
                CONFIG_JFFS2_NAND_DEV


@@ -2532,6 +2582,19 @@ CBFS (Coreboot Filesystem) support
 
                Specify the number of FPGA devices to support.
 
 
                Specify the number of FPGA devices to support.
 

+               CONFIG_CMD_FPGA_LOADMK
+
+               Enable support for fpga loadmk command
+
+               CONFIG_CMD_FPGA_LOADP
+
+               Enable support for fpga loadp command - load partial bitstream
+
+               CONFIG_CMD_FPGA_LOADBP
+
+               Enable support for fpga loadbp command - load partial bitstream
+               (Xilinx only)
+

                CONFIG_SYS_FPGA_PROG_FEEDBACK
 
                Enable printing of hash marks during FPGA configuration.
                CONFIG_SYS_FPGA_PROG_FEEDBACK
 
                Enable printing of hash marks during FPGA configuration.


@@ -3278,6 +3341,10 @@ FIT uImage format:
                supports MMC, NAND and YMODEM loading of U-Boot and NAND
                NAND loading of the Linux Kernel.
 
                supports MMC, NAND and YMODEM loading of U-Boot and NAND
                NAND loading of the Linux Kernel.
 

+               CONFIG_SPL_OS_BOOT
+               Enable booting directly to an OS from SPL.
+               See also: doc/README.falcon
+

                CONFIG_SPL_DISPLAY_PRINT
                For ARM, enable an optional function to print more information
                about the running system.
                CONFIG_SPL_DISPLAY_PRINT
                For ARM, enable an optional function to print more information
                about the running system.


@@ -3353,6 +3420,10 @@ FIT uImage format:
                Support for NAND boot using simple NAND drivers that
                expose the cmd_ctrl() interface.
 
                Support for NAND boot using simple NAND drivers that
                expose the cmd_ctrl() interface.
 

+               CONFIG_SPL_MTD_SUPPORT
+               Support for the MTD subsystem within SPL.  Useful for
+               environment on NAND support within SPL.
+

                CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
                Set for the SPL on PPC mpc8xxx targets, support for
                drivers/ddr/fsl/libddr.o in SPL binary.
                CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
                Set for the SPL on PPC mpc8xxx targets, support for
                drivers/ddr/fsl/libddr.o in SPL binary.


@@ -4515,6 +4586,11 @@ Low Level (hardware related) configuration options:
 - CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
                Enables the RTC32K OSC on AM33xx based plattforms
 
 - CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
                Enables the RTC32K OSC on AM33xx based plattforms
 

+- CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+               Option to disable subpage write in NAND driver
+               driver that uses this:
+               drivers/mtd/nand/davinci_nand.c
+

 Freescale QE/FMAN Firmware Support:
 -----------------------------------
 
 Freescale QE/FMAN Firmware Support:
 -----------------------------------