* Copyright (C) 2008
* Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*
* 2007-09-21 - Restructured codes by jsgood (jsgood.yang@samsung.com)
* 2007-09-21 - Added MoviNAND and OneNAND boot codes by
#include <asm-offsets.h>
#include <config.h>
#include <version.h>
-#ifdef CONFIG_ENABLE_MMU
-#include <asm/proc/domain.h>
-#endif
-#if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE)
+#ifndef CONFIG_SYS_PHY_UBOOT_BASE
#define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE
#endif
.globl _start
_start: b reset
-#ifndef CONFIG_NAND_SPL
+#ifndef CONFIG_SPL_BUILD
ldr pc, _undefined_instruction
ldr pc, _software_interrupt
ldr pc, _prefetch_abort
*************************************************************************
*/
-.globl _TEXT_BASE
-_TEXT_BASE:
-#ifdef CONFIG_NAND_SPL /* deprecated, use instead CONFIG_SPL_BUILD */
- .word CONFIG_SYS_TEXT_BASE
-#else
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
- .word CONFIG_SPL_TEXT_BASE
-#else
- .word CONFIG_SYS_TEXT_BASE
-#endif
-#endif
-
-/*
- * Below variable is very important because we use MMU in U-Boot.
- * Without it, we cannot run code correctly before MMU is ON.
- * by scsuh.
- */
-_TEXT_PHY_BASE:
- .word CONFIG_SYS_PHY_UBOOT_BASE
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-
-.globl _bss_start_ofs
-_bss_start_ofs:
- .word __bss_start - _start
-
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
- .word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
- .word _end - _start
-
/* IRQ stack memory (calculated at run-time) + 8 bytes */
.globl IRQ_STACK_START_IN
IRQ_STACK_START_IN:
* When booting from NAND - it has definitely been a reset, so, no need
* to flush caches and disable the MMU
*/
-#ifndef CONFIG_NAND_SPL
+#ifndef CONFIG_SPL_BUILD
/*
* flush v4 I/D caches
*/
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-#ifdef CONFIG_ENABLE_MMU
-enable_mmu:
- /* enable domain access */
- ldr r5, =0x0000ffff
- mcr p15, 0, r5, c3, c0, 0 /* load domain access register */
-
- /* Set the TTB register */
- ldr r0, _mmu_table_base
- ldr r1, =CONFIG_SYS_PHY_UBOOT_BASE
- ldr r2, =0xfff00000
- bic r0, r0, r2
- orr r1, r0, r1
- mcr p15, 0, r1, c2, c0, 0
-
- /* Enable the MMU */
- mrc p15, 0, r0, c1, c0, 0
- orr r0, r0, #1 /* Set CR_M to enable MMU */
-
- /* Prepare to enable the MMU */
- adr r1, skip_hw_init
- and r1, r1, #0x3fc
- ldr r2, _TEXT_BASE
- ldr r3, =0xfff00000
- and r2, r2, r3
- orr r2, r2, r1
- b mmu_enable
-
- .align 5
- /* Run in a single cache-line */
-mmu_enable:
-
- mcr p15, 0, r0, c1, c0, 0
- nop
- nop
- mov pc, r2
-skip_hw_init:
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
-#ifdef CONFIG_ENABLE_MMU
-_mmu_table_base:
- .word mmu_table
-#endif
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
mov pc, lr
-#ifndef CONFIG_NAND_SPL
-/*
- * we assume that cache operation is done before. (eg. cleanup_before_linux())
- * actually, we don't need to do anything about cache if not use d-cache in
- * U-Boot. So, in this function we clean only MMU. by scsuh
- *
- * void theLastJump(void *kernel, int arch_num, uint boot_params);
- */
-#ifdef CONFIG_ENABLE_MMU
- .globl theLastJump
-theLastJump:
- mov r9, r0
- ldr r3, =0xfff00000
- ldr r4, _TEXT_PHY_BASE
- adr r5, phy_last_jump
- bic r5, r5, r3
- orr r5, r5, r4
- mov pc, r5
-phy_last_jump:
- /*
- * disable MMU stuff
- */
- mrc p15, 0, r0, c1, c0, 0
- bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */
- bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */
- orr r0, r0, #0x00000002 /* set bit 2 (A) Align */
- orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */
- mcr p15, 0, r0, c1, c0, 0
-
- mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
-
- mov r0, #0
- mov pc, r9
-#endif
-
-
+#ifndef CONFIG_SPL_BUILD
/*
*************************************************************************
*
/* save caller lr in position 0 of saved stack */
str lr, [r0]
/* get the spsr */
- mrs r0, spsr
+ mrs lr, spsr
/* save spsr in position 1 of saved stack */
str lr, [r0, #4]
+ /* restore lr */
+ ldr lr, [r0]
/* restore r0 */
ldr r0, [r13]
/* pop stack entry */
get_bad_stack
bad_save_user_regs
bl do_fiq
-#endif /* CONFIG_NAND_SPL */
+#endif /* CONFIG_SPL_BUILD */
projects / karo-tx-uboot.git / blobdiff