Update from 2013.01 to 2013.07

[karo-tx-uboot.git] / arch / arm / cpu / arm926ejs / mxs / spl_boot.c

diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
index 57da57dd9b9dcc134885ab74ee863fa4b110c1ff..74bc009dc5b0bc1a5aba1fc07d54a55036408a19 100644 (file)
--- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
@@ -4,23 +4,7 @@
  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
  * on behalf of DENX Software Engineering GmbH
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -40,7 +24,8 @@
  */
 /*
  * There's nothing to be taken into consideration for the rollover.
- * Two's complement arithmetic used correctly does all the magic automagically.
+ * Two's complement arithmetic used correctly does all that's needed
+ * automagically.
  */
 void early_delay(int delay)
 {
@@ -53,12 +38,21 @@ void early_delay(int delay)
 
 #define        MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
 static const iomux_cfg_t iomux_boot[] = {
+#if defined(CONFIG_MX23)
+       MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD,
+       MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD,
+       MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD,
+       MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD,
+       MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD,
+       MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD,
+#elif defined(CONFIG_MX28)
        MX28_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD,
        MX28_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD,
        MX28_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD,
        MX28_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD,
        MX28_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD,
        MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD,
+#endif
 };
 
 static uint8_t mxs_get_bootmode_index(void)
@@ -70,6 +64,21 @@ static uint8_t mxs_get_bootmode_index(void)
        /* Setup IOMUX of bootmode pads to GPIO */
        mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot));
 
+#if defined(CONFIG_MX23)
+       /* Setup bootmode pins as GPIO input */
+       gpio_direction_input(MX23_PAD_LCD_D00__GPIO_1_0);
+       gpio_direction_input(MX23_PAD_LCD_D01__GPIO_1_1);
+       gpio_direction_input(MX23_PAD_LCD_D02__GPIO_1_2);
+       gpio_direction_input(MX23_PAD_LCD_D03__GPIO_1_3);
+       gpio_direction_input(MX23_PAD_LCD_D05__GPIO_1_5);
+
+       /* Read bootmode pads */
+       bootmode |= (gpio_get_value(MX23_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0;
+       bootmode |= (gpio_get_value(MX23_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1;
+       bootmode |= (gpio_get_value(MX23_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2;
+       bootmode |= (gpio_get_value(MX23_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3;
+       bootmode |= (gpio_get_value(MX23_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5;
+#elif defined(CONFIG_MX28)
        /* Setup bootmode pins as GPIO input */
        gpio_direction_input(MX28_PAD_LCD_D00__GPIO_1_0);
        gpio_direction_input(MX28_PAD_LCD_D01__GPIO_1_1);
@@ -85,6 +94,7 @@ static uint8_t mxs_get_bootmode_index(void)
        bootmode |= (gpio_get_value(MX28_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3;
        bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4;
        bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5;
+#endif
 
        for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) {
                masked = bootmode & mxs_boot_modes[i].boot_mask;
@@ -125,15 +135,3 @@ inline void board_init_r(gd_t *id, ulong dest_addr)
        for (;;)
                ;
 }
-
-#ifndef CONFIG_SPL_SERIAL_SUPPORT
-void serial_putc(const char c) {}
-void serial_puts(const char *s) {}
-#endif
-void hang(void) __attribute__ ((noreturn));
-void hang(void)
-{
-       serial_puts("ERROR: please reset the target\n");
-       for (;;)
-               ;
-}