* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
* takes a few seconds to roll. The boot doesn't take that long, so to keep the
* code simple, it doesn't take rolling into consideration.
*/
-#define HW_DIGCTRL_MICROSECONDS 0x8001c0c0
void early_delay(int delay)
{
- uint32_t st = readl(HW_DIGCTRL_MICROSECONDS);
+ struct mxs_digctl_regs *digctl_regs =
+ (struct mxs_digctl_regs *)MXS_DIGCTL_BASE;
+
+ uint32_t st = readl(&digctl_regs->hw_digctl_microseconds);
st += delay;
- while (st > readl(HW_DIGCTRL_MICROSECONDS))
+ while (st > readl(&digctl_regs->hw_digctl_microseconds))
;
}
#define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-const iomux_cfg_t iomux_boot[] = {
+static const iomux_cfg_t iomux_boot[] = {
+#if defined(CONFIG_MX23)
+ MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD,
+ MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD,
+ MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD,
+ MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD,
+ MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD,
+ MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD,
+#elif defined(CONFIG_MX28)
MX28_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD,
MX28_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD,
MX28_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD,
MX28_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD,
MX28_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD,
MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD,
+#endif
};
-uint8_t mxs_get_bootmode_index(void)
+static uint8_t mxs_get_bootmode_index(void)
{
uint8_t bootmode = 0;
int i;
/* Setup IOMUX of bootmode pads to GPIO */
mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot));
+#if defined(CONFIG_MX23)
+ /* Setup bootmode pins as GPIO input */
+ gpio_direction_input(MX23_PAD_LCD_D00__GPIO_1_0);
+ gpio_direction_input(MX23_PAD_LCD_D01__GPIO_1_1);
+ gpio_direction_input(MX23_PAD_LCD_D02__GPIO_1_2);
+ gpio_direction_input(MX23_PAD_LCD_D03__GPIO_1_3);
+ gpio_direction_input(MX23_PAD_LCD_D05__GPIO_1_5);
+
+ /* Read bootmode pads */
+ bootmode |= (gpio_get_value(MX23_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0;
+ bootmode |= (gpio_get_value(MX23_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1;
+ bootmode |= (gpio_get_value(MX23_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2;
+ bootmode |= (gpio_get_value(MX23_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3;
+ bootmode |= (gpio_get_value(MX23_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5;
+#elif defined(CONFIG_MX28)
/* Setup bootmode pins as GPIO input */
gpio_direction_input(MX28_PAD_LCD_D00__GPIO_1_0);
gpio_direction_input(MX28_PAD_LCD_D01__GPIO_1_1);
bootmode |= (gpio_get_value(MX28_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3;
bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4;
bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5;
+#endif
for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) {
masked = bootmode & mxs_boot_modes[i].boot_mask;
for (;;)
;
}
-
-#ifndef CONFIG_SPL_SERIAL_SUPPORT
-void serial_putc(const char c) {}
-void serial_puts(const char *s) {}
-#endif
-void hang(void) __attribute__ ((noreturn));
-void hang(void)
-{
- for (;;)
- ;
-}