/*
* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <div64.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/arch/imx-regs.h>
struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+#ifdef CONFIG_MXC_OCOTP
+void enable_ocotp_clk(unsigned char enable)
+{
+ u32 reg;
+
+ reg = __raw_readl(&imx_ccm->CCGR2);
+ if (enable)
+ reg |= MXC_CCM_CCGR2_OCOTP_CTRL_MASK;
+ else
+ reg &= ~MXC_CCM_CCGR2_OCOTP_CTRL_MASK;
+ __raw_writel(reg, &imx_ccm->CCGR2);
+}
+#endif
+
void enable_usboh3_clk(unsigned char enable)
{
u32 reg;
}
-#ifdef CONFIG_I2C_MXC
+#ifdef CONFIG_SYS_I2C_MXC
/* i2c_num can be from 0 - 2 */
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
{
div = __raw_readl(&imx_ccm->analog_pll_sys);
div &= BM_ANADIG_PLL_SYS_DIV_SELECT;
- return infreq * (div >> 1);
+ return (infreq * div) >> 1;
case PLL_BUS:
div = __raw_readl(&imx_ccm->analog_pll_528);
div &= BM_ANADIG_PLL_528_DIV_SELECT;
div = __raw_readl(&imx_ccm->analog_pll_enet);
div &= BM_ANADIG_PLL_ENET_DIV_SELECT;
- return (div == 3 ? 125000000 : 25000000 * (div << 1));
+ return 25000000 * (div + (div >> 1) + 1);
default:
return 0;
}
/* NOTREACHED */
}
+static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num)
+{
+ u32 div;
+ u64 freq;
+
+ switch (pll) {
+ case PLL_BUS:
+ if (pfd_num == 3) {
+ /* No PFD3 on PPL2 */
+ return 0;
+ }
+ div = __raw_readl(&imx_ccm->analog_pfd_528);
+ freq = (u64)decode_pll(PLL_BUS, MXC_HCLK);
+ break;
+ case PLL_USBOTG:
+ div = __raw_readl(&imx_ccm->analog_pfd_480);
+ freq = (u64)decode_pll(PLL_USBOTG, MXC_HCLK);
+ break;
+ default:
+ /* No PFD on other PLL */
+ return 0;
+ }
+
+ return lldiv(freq * 18, (div & ANATOP_PFD_FRAC_MASK(pfd_num)) >>
+ ANATOP_PFD_FRAC_SHIFT(pfd_num));
+}
static u32 get_mcu_main_clk(void)
{
freq = decode_pll(PLL_BUS, MXC_HCLK);
break;
case 1:
- freq = PLL2_PFD2_FREQ;
+ freq = mxc_get_pll_pfd(PLL_BUS, 2);
break;
case 2:
- freq = PLL2_PFD0_FREQ;
+ freq = mxc_get_pll_pfd(PLL_BUS, 0);
break;
case 3:
- freq = PLL2_PFD2_DIV_FREQ;
+ /* static / 2 divider */
+ freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2;
break;
default:
break;
static u32 get_uart_clk(void)
{
u32 reg, uart_podf;
-
+ u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
reg = __raw_readl(&imx_ccm->cscdr1);
+#ifdef CONFIG_MX6SL
+ if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
+ freq = MXC_HCLK;
+#endif
reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK;
uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET;
- return PLL3_80M / (uart_podf + 1);
+ return freq / (uart_podf + 1);
}
static u32 get_cspi_clk(void)
reg &= MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK;
cspi_podf = reg >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
- return PLL3_60M / (cspi_podf + 1);
+ return decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1));
}
static u32 get_axi_clk(void)
if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) {
if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL)
- root_freq = PLL2_PFD2_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
else
- root_freq = PLL3_PFD1_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_USBOTG, 1);
} else
root_freq = get_periph_clk();
static u32 get_emi_slow_clk(void)
{
- u32 emi_clk_sel, emi_slow_pof, cscmr1, root_freq = 0;
+ u32 emi_clk_sel, emi_slow_podf, cscmr1, root_freq = 0;
cscmr1 = __raw_readl(&imx_ccm->cscmr1);
emi_clk_sel = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK;
emi_clk_sel >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET;
- emi_slow_pof = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK;
- emi_slow_pof >>= MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET;
+ emi_slow_podf = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK;
+ emi_slow_podf >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET;
switch (emi_clk_sel) {
case 0:
root_freq = decode_pll(PLL_USBOTG, MXC_HCLK);
break;
case 2:
- root_freq = PLL2_PFD2_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
break;
case 3:
- root_freq = PLL2_PFD0_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_BUS, 0);
break;
}
- return root_freq / (emi_slow_pof + 1);
+ return root_freq / (emi_slow_podf + 1);
}
+#ifdef CONFIG_MX6SL
+static u32 get_mmdc_ch0_clk(void)
+{
+ u32 cbcmr = __raw_readl(&imx_ccm->cbcmr);
+ u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
+ u32 freq, podf;
+
+ podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) \
+ >> MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
+
+ switch ((cbcmr & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >>
+ MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) {
+ case 0:
+ freq = decode_pll(PLL_BUS, MXC_HCLK);
+ break;
+ case 1:
+ freq = mxc_get_pll_pfd(PLL_BUS, 2);
+ break;
+ case 2:
+ freq = mxc_get_pll_pfd(PLL_BUS, 0);
+ break;
+ case 3:
+ /* static / 2 divider */
+ freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2;
+ }
+
+ return freq / (podf + 1);
+
+}
+#else
static u32 get_mmdc_ch0_clk(void)
{
u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
return get_periph_clk() / (mmdc_ch0_podf + 1);
}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+int enable_fec_anatop_clock(enum enet_freq freq)
+{
+ u32 reg = 0;
+ s32 timeout = 100000;
+
+ struct anatop_regs __iomem *anatop =
+ (struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
+
+ if (freq < ENET_25MHz || freq > ENET_125MHz)
+ return -EINVAL;
+
+ reg = readl(&anatop->pll_enet);
+ reg &= ~BM_ANADIG_PLL_ENET_DIV_SELECT;
+ reg |= freq;
+
+ if ((reg & BM_ANADIG_PLL_ENET_POWERDOWN) ||
+ (!(reg & BM_ANADIG_PLL_ENET_LOCK))) {
+ reg &= ~BM_ANADIG_PLL_ENET_POWERDOWN;
+ writel(reg, &anatop->pll_enet);
+ while (timeout--) {
+ if (readl(&anatop->pll_enet) & BM_ANADIG_PLL_ENET_LOCK)
+ break;
+ }
+ if (timeout < 0)
+ return -ETIMEDOUT;
+ }
+
+ /* Enable FEC clock */
+ reg |= BM_ANADIG_PLL_ENET_ENABLE;
+ reg &= ~BM_ANADIG_PLL_ENET_BYPASS;
+ writel(reg, &anatop->pll_enet);
+
+ return 0;
+}
+#endif
static u32 get_usdhc_clk(u32 port)
{
}
if (clk_sel)
- root_freq = PLL2_PFD0_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_BUS, 0);
else
- root_freq = PLL2_PFD2_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
return root_freq / (usdhc_podf + 1);
}
u32 imx_get_fecclk(void)
{
- return decode_pll(PLL_ENET, MXC_HCLK);
+ return mxc_get_clock(MXC_IPG_CLK);
}
-int enable_sata_clock(void)
+static int enable_enet_pll(uint32_t en)
{
- u32 reg = 0;
- s32 timeout = 100000;
struct mxc_ccm_reg *const imx_ccm
= (struct mxc_ccm_reg *) CCM_BASE_ADDR;
-
- /* Enable sata clock */
- reg = readl(&imx_ccm->CCGR5); /* CCGR5 */
- reg |= MXC_CCM_CCGR5_SATA_MASK;
- writel(reg, &imx_ccm->CCGR5);
+ s32 timeout = 100000;
+ u32 reg = 0;
/* Enable PLLs */
reg = readl(&imx_ccm->analog_pll_enet);
return -EIO;
reg &= ~BM_ANADIG_PLL_SYS_BYPASS;
writel(reg, &imx_ccm->analog_pll_enet);
- reg |= BM_ANADIG_PLL_ENET_ENABLE_SATA;
+ reg |= en;
writel(reg, &imx_ccm->analog_pll_enet);
+ return 0;
+}
- return 0 ;
+static void ungate_sata_clock(void)
+{
+ struct mxc_ccm_reg *const imx_ccm =
+ (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ /* Enable SATA clock. */
+ setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK);
+}
+
+static void ungate_pcie_clock(void)
+{
+ struct mxc_ccm_reg *const imx_ccm =
+ (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ /* Enable PCIe clock. */
+ setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_PCIE_MASK);
+}
+
+int enable_sata_clock(void)
+{
+ ungate_sata_clock();
+ return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA);
+}
+
+int enable_pcie_clock(void)
+{
+ struct anatop_regs *anatop_regs =
+ (struct anatop_regs *)ANATOP_BASE_ADDR;
+ struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ /*
+ * Here be dragons!
+ *
+ * The register ANATOP_MISC1 is not documented in the Freescale
+ * MX6RM. The register that is mapped in the ANATOP space and
+ * marked as ANATOP_MISC1 is actually documented in the PMU section
+ * of the datasheet as PMU_MISC1.
+ *
+ * Switch LVDS clock source to SATA (0xb), disable clock INPUT and
+ * enable clock OUTPUT. This is important for PCI express link that
+ * is clocked from the i.MX6.
+ */
+#define ANADIG_ANA_MISC1_LVDSCLK1_IBEN (1 << 12)
+#define ANADIG_ANA_MISC1_LVDSCLK1_OBEN (1 << 10)
+#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK 0x0000001F
+ clrsetbits_le32(&anatop_regs->ana_misc1,
+ ANADIG_ANA_MISC1_LVDSCLK1_IBEN |
+ ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK,
+ ANADIG_ANA_MISC1_LVDSCLK1_OBEN | 0xb);
+
+ /* PCIe reference clock sourced from AXI. */
+ clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL);
+
+ /* Party time! Ungate the clock to the PCIe. */
+ ungate_sata_clock();
+ ungate_pcie_clock();
+
+ return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA |
+ BM_ANADIG_PLL_ENET_ENABLE_PCIE);
}
unsigned int mxc_get_clock(enum mxc_clock clk)
return 0;
}
+void enable_ipu_clock(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ int reg;
+ reg = readl(&mxc_ccm->CCGR3);
+ reg |= MXC_CCM_CCGR3_IPU1_IPU_MASK;
+ writel(reg, &mxc_ccm->CCGR3);
+}
/***************************************************/
U_BOOT_CMD(
projects / karo-tx-uboot.git / blobdiff