]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - arch/arm/cpu/armv7/mx6/soc.c
Merge branch 'u-boot-arm/next' into 'u-boot-arm/master'
[karo-tx-uboot.git] / arch / arm / cpu / armv7 / mx6 / soc.c
index 3e095aab848d5bc96806c085cdb69a8f987184a4..0208cba9cc7a50a08514987db65b33ac9b39c022 100644 (file)
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
 
+enum ldo_reg {
+       LDO_ARM,
+       LDO_SOC,
+       LDO_PU,
+};
+
 struct scu_regs {
        u32     ctrl;
        u32     config;
@@ -115,10 +121,11 @@ static void clear_ldo_ramp(void)
  * Possible values are from 0.725V to 1.450V in steps of
  * 0.025V (25mV).
  */
-static void set_vddsoc(u32 mv)
+static int set_ldo_voltage(enum ldo_reg ldo, u32 mv)
 {
        struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
-       u32 val, reg = readl(&anatop->reg_core);
+       u32 val, step, old, reg = readl(&anatop->reg_core);
+       u8 shift;
 
        if (mv < 725)
                val = 0x00;     /* Power gated off */
@@ -129,12 +136,35 @@ static void set_vddsoc(u32 mv)
 
        clear_ldo_ramp();
 
+       switch (ldo) {
+       case LDO_SOC:
+               shift = 18;
+               break;
+       case LDO_PU:
+               shift = 9;
+               break;
+       case LDO_ARM:
+               shift = 0;
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       old = (reg & (0x1F << shift)) >> shift;
+       step = abs(val - old);
+       if (step == 0)
+               return 0;
+
+       reg = (reg & ~(0x1F << shift)) | (val << shift);
+       writel(reg, &anatop->reg_core);
+
        /*
-        * Mask out the REG_CORE[22:18] bits (REG2_TRIG)
-        * and set them to the calculated value (0.7V + val * 0.25V)
+        * The LDO ramp-up is based on 64 clock cycles of 24 MHz = 2.6 us per
+        * step
         */
-       reg = (reg & ~(0x1F << 18)) | (val << 18);
-       writel(reg, &anatop->reg_core);
+       udelay(3 * step);
+
+       return 0;
 }
 
 static void imx_set_wdog_powerdown(bool enable)
@@ -151,8 +181,6 @@ int arch_cpu_init(void)
 {
        init_aips();
 
-       set_vddsoc(1175);       /* Set VDDSOC to 1.175V */
-
        imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
 
 #ifdef CONFIG_APBH_DMA
@@ -163,6 +191,13 @@ int arch_cpu_init(void)
        return 0;
 }
 
+int board_postclk_init(void)
+{
+       set_ldo_voltage(LDO_SOC, 1175); /* Set VDDSOC to 1.175V */
+
+       return 0;
+}
+
 #ifndef CONFIG_SYS_DCACHE_OFF
 void enable_caches(void)
 {