Unified codebase for TX28, TX48, TX51, TX53

[karo-tx-uboot.git] / arch / arm / cpu / armv7 / omap3 / clock.c

diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
index 567817e0ec3b062c3ee2a66c901b14ab1b44a8b2..09c51f62aad0cf1f64b3ba171a235f546bdc139d 100644 (file)
--- a/arch/arm/cpu/armv7/omap3/clock.c
+++ b/arch/arm/cpu/armv7/omap3/clock.c
@@ -572,6 +572,22 @@ void prcm_init(void)
        }
 
        if (get_cpu_family() == CPU_OMAP36XX) {
+               /*
+                * In warm reset conditions on OMAP36xx/AM/DM37xx
+                * the rom code incorrectly sets the DPLL4 clock
+                * input divider to /6.5. Section 3.5.3.3.3.2.1 of
+                * the AM/DM37x TRM explains that the /6.5 divider
+                * is used only when the input clock is 13MHz.
+                *
+                * If the part is in this cpu family *and* the input
+                * clock *is not* 13 MHz, then reset the DPLL4 clock
+                * input divider to /1 as it should never set to /6.5
+                * in this case.
+                */
+               if (sys_clkin_sel != 1) /* 13 MHz */
+                       /* Bit 8: DPLL4_CLKINP_DIV */
+                       sr32(&prm_base->clksrc_ctrl, 8, 1, 0);
+
                /* Unlock MPU DPLL (slows things down, and needed later) */
                sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS);
                wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu,