]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - arch/arm/cpu/armv7/omap3/mem.c
Merge 'u-boot-microblaze/zynq' into (u-boot-arm/master'
[karo-tx-uboot.git] / arch / arm / cpu / armv7 / omap3 / mem.c
index bd914b0ee559ea15adeee62ea084af849269b9c5..e64940965447d10d110ba445b844fe3d4085456a 100644 (file)
@@ -9,20 +9,7 @@
  *     Richard Woodruff <r-woodruff2@ti.com>
  *     Syed Mohammed Khasim <khasim@ti.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
 #include <asm/arch/sys_proto.h>
 #include <command.h>
 
-/*
- * Only One NAND allowed on board at a time.
- * The GPMC CS Base for the same
- */
-unsigned int boot_flash_base;
-unsigned int boot_flash_off;
-unsigned int boot_flash_sec;
-unsigned int boot_flash_type;
-volatile unsigned int boot_flash_env_addr;
-
 struct gpmc *gpmc_cfg;
 
 #if defined(CONFIG_CMD_NAND)
+#if defined(GPMC_NAND_ECC_SP_x8_LAYOUT) || defined(GPMC_NAND_ECC_LP_x8_LAYOUT)
+static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
+       SMNAND_GPMC_CONFIG1,
+       SMNAND_GPMC_CONFIG2,
+       SMNAND_GPMC_CONFIG3,
+       SMNAND_GPMC_CONFIG4,
+       SMNAND_GPMC_CONFIG5,
+       SMNAND_GPMC_CONFIG6,
+       0,
+};
+#else
 static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
        M_NAND_GPMC_CONFIG1,
        M_NAND_GPMC_CONFIG2,
@@ -52,14 +40,8 @@ static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
        M_NAND_GPMC_CONFIG5,
        M_NAND_GPMC_CONFIG6, 0
 };
-
-#if defined(CONFIG_ENV_IS_IN_NAND)
-#define GPMC_CS 0
-#else
-#define GPMC_CS 1
-#endif
-
 #endif
+#endif /* CONFIG_CMD_NAND */
 
 #if defined(CONFIG_CMD_ONENAND)
 static const u32 gpmc_onenand[GPMC_MAX_REG] = {
@@ -70,14 +52,7 @@ static const u32 gpmc_onenand[GPMC_MAX_REG] = {
        ONENAND_GPMC_CONFIG5,
        ONENAND_GPMC_CONFIG6, 0
 };
-
-#if defined(CONFIG_ENV_IS_IN_ONENAND)
-#define GPMC_CS 0
-#else
-#define GPMC_CS 1
-#endif
-
-#endif
+#endif /* CONFIG_CMD_ONENAND */
 
 /********************************************************
  *  mem_ok() - test used to see if timings are correct
@@ -96,6 +71,7 @@ u32 mem_ok(u32 cs)
        writel(0x0, addr + 4);          /* remove pattern off the bus */
        val1 = readl(addr + 0x400);     /* get pos A value */
        val2 = readl(addr);             /* get val2 */
+       writel(0x0, addr + 0x400);      /* clear pos A */
 
        if ((val1 != 0) || (val2 != pattern))   /* see if pos A val changed */
                return 0;
@@ -115,9 +91,15 @@ void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
        writel(gpmc_config[3], &cs->config4);
        writel(gpmc_config[4], &cs->config5);
        writel(gpmc_config[5], &cs->config6);
-       /* Enable the config */
-       writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) |
-               (1 << 6)), &cs->config7);
+
+       /*
+        * Enable the config.  size is the CS size and goes in
+        * bits 11:8.  We set bit 6 to enable this CS and the base
+        * address goes into bits 5:0.
+        */
+        writel((size << 8) | (GPMC_CS_ENABLE << 6) |
+                                ((base >> 24) & GPMC_BASEADDR_MASK),
+                                &cs->config7);
        sdelay(2000);
 }
 
@@ -134,10 +116,6 @@ void gpmc_init(void)
        const u32 *gpmc_config = NULL;
        u32 base = 0;
        u32 size = 0;
-#if defined(CONFIG_ENV_IS_IN_NAND) || defined(CONFIG_ENV_IS_IN_ONENAND)
-       u32 f_off = CONFIG_SYS_MONITOR_LEN;
-       u32 f_sec = 0;
-#endif
 #endif
        u32 config = 0;
 
@@ -162,15 +140,6 @@ void gpmc_init(void)
        base = PISMO1_NAND_BASE;
        size = PISMO1_NAND_SIZE;
        enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
-#if defined(CONFIG_ENV_IS_IN_NAND)
-       f_off = SMNAND_ENV_OFFSET;
-       f_sec = (128 << 10);    /* 128 KiB */
-       /* env setup */
-       boot_flash_base = base;
-       boot_flash_off = f_off;
-       boot_flash_sec = f_sec;
-       boot_flash_env_addr = f_off;
-#endif
 #endif
 
 #if defined(CONFIG_CMD_ONENAND)
@@ -178,14 +147,5 @@ void gpmc_init(void)
        base = PISMO1_ONEN_BASE;
        size = PISMO1_ONEN_SIZE;
        enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
-#if defined(CONFIG_ENV_IS_IN_ONENAND)
-       f_off = ONENAND_ENV_OFFSET;
-       f_sec = (128 << 10);    /* 128 KiB */
-       /* env setup */
-       boot_flash_base = base;
-       boot_flash_off = f_off;
-       boot_flash_sec = f_sec;
-       boot_flash_env_addr = f_off;
-#endif
 #endif
 }