/* Tegra2 high-level function multiplexing */
#include <common.h>
#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
int funcmux_select(enum periph_id id, int config)
{
- if (config != 0) {
- debug("%s: invalid config %d for periph_id %d", __func__,
- config, id);
- return -1;
- }
+ int bad_config = config != FUNCMUX_DEFAULT;
+
switch (id) {
case PERIPH_ID_UART1:
- pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA);
- pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA);
- pinmux_tristate_disable(PINGRP_IRRX);
- pinmux_tristate_disable(PINGRP_IRTX);
+ if (config == FUNCMUX_UART1_IRRX_IRTX) {
+ pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA);
+ pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA);
+ pinmux_tristate_disable(PINGRP_IRRX);
+ pinmux_tristate_disable(PINGRP_IRTX);
+ /*
+ * Tegra appears to boot with function UARTA pre-
+ * selected on mux group SDB. If two mux groups are
+ * both set to the same function, it's unclear which
+ * group's pins drive the RX signals into the HW.
+ * For UARTA, SDB certainly overrides group IRTX in
+ * practice. To solve this, configure some alternative
+ * function on SDB to avoid the conflict. Also, tri-
+ * state the group to avoid driving any signal onto it
+ * until we know what's connected.
+ */
+ pinmux_tristate_enable(PINGRP_SDB);
+ pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
+ }
break;
case PERIPH_ID_UART2:
- pinmux_set_func(PINGRP_UAD, PMUX_FUNC_IRDA);
- pinmux_tristate_disable(PINGRP_UAD);
+ if (config == FUNCMUX_UART2_IRDA) {
+ pinmux_set_func(PINGRP_UAD, PMUX_FUNC_IRDA);
+ pinmux_tristate_disable(PINGRP_UAD);
+ }
break;
case PERIPH_ID_UART4:
- pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD);
- pinmux_tristate_disable(PINGRP_GMC);
+ if (config == FUNCMUX_UART4_GMC) {
+ pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD);
+ pinmux_tristate_disable(PINGRP_GMC);
+ }
+ break;
+
+ case PERIPH_ID_DVC_I2C:
+ /* there is only one selection, pinmux_config is ignored */
+ if (config == FUNCMUX_DVC_I2CP) {
+ pinmux_set_func(PINGRP_I2CP, PMUX_FUNC_I2C);
+ pinmux_tristate_disable(PINGRP_I2CP);
+ }
+ break;
+
+ case PERIPH_ID_I2C1:
+ /* support pinmux_config of 0 for now, */
+ if (config == FUNCMUX_I2C1_RM) {
+ pinmux_set_func(PINGRP_RM, PMUX_FUNC_I2C);
+ pinmux_tristate_disable(PINGRP_RM);
+ }
break;
+ case PERIPH_ID_I2C2: /* I2C2 */
+ switch (config) {
+ case FUNCMUX_I2C2_DDC: /* DDC pin group, select I2C2 */
+ pinmux_set_func(PINGRP_DDC, PMUX_FUNC_I2C2);
+ /* PTA to HDMI */
+ pinmux_set_func(PINGRP_PTA, PMUX_FUNC_HDMI);
+ pinmux_tristate_disable(PINGRP_DDC);
+ break;
+ case FUNCMUX_I2C2_PTA: /* PTA pin group, select I2C2 */
+ pinmux_set_func(PINGRP_PTA, PMUX_FUNC_I2C2);
+ /* set DDC_SEL to RSVDx (RSVD2 works for now) */
+ pinmux_set_func(PINGRP_DDC, PMUX_FUNC_RSVD2);
+ pinmux_tristate_disable(PINGRP_PTA);
+ bad_config = 0;
+ break;
+ }
+ break;
+ case PERIPH_ID_I2C3: /* I2C3 */
+ /* support pinmux_config of 0 for now */
+ if (config == FUNCMUX_I2C3_DTF) {
+ pinmux_set_func(PINGRP_DTF, PMUX_FUNC_I2C3);
+ pinmux_tristate_disable(PINGRP_DTF);
+ }
+ break;
+
+ case PERIPH_ID_SDMMC2:
+ if (config == FUNCMUX_SDMMC2_DTA_DTD_8BIT) {
+ pinmux_set_func(PINGRP_DTA, PMUX_FUNC_SDIO2);
+ pinmux_set_func(PINGRP_DTD, PMUX_FUNC_SDIO2);
+
+ pinmux_tristate_disable(PINGRP_DTA);
+ pinmux_tristate_disable(PINGRP_DTD);
+ }
+ break;
+
+ case PERIPH_ID_SDMMC3:
+ switch (config) {
+ case FUNCMUX_SDMMC3_SDB_SLXA_8BIT:
+ pinmux_set_func(PINGRP_SLXA, PMUX_FUNC_SDIO3);
+ pinmux_set_func(PINGRP_SLXC, PMUX_FUNC_SDIO3);
+ pinmux_set_func(PINGRP_SLXD, PMUX_FUNC_SDIO3);
+ pinmux_set_func(PINGRP_SLXK, PMUX_FUNC_SDIO3);
+
+ pinmux_tristate_disable(PINGRP_SLXA);
+ pinmux_tristate_disable(PINGRP_SLXC);
+ pinmux_tristate_disable(PINGRP_SLXD);
+ pinmux_tristate_disable(PINGRP_SLXK);
+ /* fall through */
+
+ case FUNCMUX_SDMMC3_SDB_4BIT:
+ pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
+ pinmux_set_func(PINGRP_SDC, PMUX_FUNC_SDIO3);
+ pinmux_set_func(PINGRP_SDD, PMUX_FUNC_SDIO3);
+
+ pinmux_tristate_disable(PINGRP_SDB);
+ pinmux_tristate_disable(PINGRP_SDC);
+ pinmux_tristate_disable(PINGRP_SDD);
+ bad_config = 0;
+ break;
+ }
+ break;
+
+ case PERIPH_ID_SDMMC4:
+ switch (config) {
+ case FUNCMUX_SDMMC4_ATC_ATD_8BIT:
+ pinmux_set_func(PINGRP_ATC, PMUX_FUNC_SDIO4);
+ pinmux_set_func(PINGRP_ATD, PMUX_FUNC_SDIO4);
+
+ pinmux_tristate_disable(PINGRP_ATC);
+ pinmux_tristate_disable(PINGRP_ATD);
+ break;
+
+ case FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT:
+ pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
+ pinmux_tristate_disable(PINGRP_GME);
+ /* fall through */
+
+ case FUNCMUX_SDMMC4_ATB_GMA_4_BIT:
+ pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
+ pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
+
+ pinmux_tristate_disable(PINGRP_ATB);
+ pinmux_tristate_disable(PINGRP_GMA);
+ bad_config = 0;
+ break;
+ }
+ break;
+
+ case PERIPH_ID_KBC:
+ if (config == FUNCMUX_DEFAULT) {
+ enum pmux_pingrp grp[] = {PINGRP_KBCA, PINGRP_KBCB,
+ PINGRP_KBCC, PINGRP_KBCD, PINGRP_KBCE,
+ PINGRP_KBCF};
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(grp); i++) {
+ pinmux_tristate_disable(grp[i]);
+ pinmux_set_func(grp[i], PMUX_FUNC_KBC);
+ pinmux_set_pullupdown(grp[i], PMUX_PULL_UP);
+ }
+
+ break;
+ }
default:
debug("%s: invalid periph_id %d", __func__, id);
return -1;
}
+ if (bad_config) {
+ debug("%s: invalid config %d for periph_id %d", __func__,
+ config, id);
+ return -1;
+ }
+
return 0;
}
projects / karo-tx-uboot.git / blobdiff