ARM: HYP/non-sec: remove MIDR check to validate CBAR

[karo-tx-uboot.git] / arch / arm / cpu / armv7 / virt-v7.c

diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
index 2cd604f97fa1802462ffa41ddf6bb3e362888d0d..651ca4015d04456df3fa172adb9924af2552c4b5 100644 (file)
--- a/arch/arm/cpu/armv7/virt-v7.c
+++ b/arch/arm/cpu/armv7/virt-v7.c
@@ -13,17 +13,10 @@
 #include <asm/armv7.h>
 #include <asm/gic.h>
 #include <asm/io.h>
+#include <asm/secure.h>
 
 unsigned long gic_dist_addr;
 
-static unsigned int read_cpsr(void)
-{
-       unsigned int reg;
-
-       asm volatile ("mrs %0, cpsr\n" : "=r" (reg));
-       return reg;
-}
-
 static unsigned int read_id_pfr1(void)
 {
        unsigned int reg;
@@ -37,25 +30,8 @@ static unsigned long get_gicd_base_address(void)
 #ifdef CONFIG_ARM_GIC_BASE_ADDRESS
        return CONFIG_ARM_GIC_BASE_ADDRESS + GIC_DIST_OFFSET;
 #else
-       unsigned midr;
        unsigned periphbase;
 
-       /* check whether we are an Cortex-A15 or A7.
-        * The actual HYP switch should work with all CPUs supporting
-        * the virtualization extension, but we need the GIC address,
-        * which we know only for sure for those two CPUs.
-        */
-       asm("mrc p15, 0, %0, c0, c0, 0\n" : "=r"(midr));
-       switch (midr & MIDR_PRIMARY_PART_MASK) {
-       case MIDR_CORTEX_A9_R0P1:
-       case MIDR_CORTEX_A15_R0P0:
-       case MIDR_CORTEX_A7_R0P0:
-               break;
-       default:
-               printf("nonsec: could not determine GIC address.\n");
-               return -1;
-       }
-
        /* get the GIC base address from the CBAR register */
        asm("mrc p15, 4, %0, c15, c0, 0\n" : "=r" (periphbase));
 
@@ -72,6 +48,18 @@ static unsigned long get_gicd_base_address(void)
 #endif
 }
 
+static void relocate_secure_section(void)
+{
+#ifdef CONFIG_ARMV7_SECURE_BASE
+       size_t sz = __secure_end - __secure_start;
+
+       memcpy((void *)CONFIG_ARMV7_SECURE_BASE, __secure_start, sz);
+       flush_dcache_range(CONFIG_ARMV7_SECURE_BASE,
+                          CONFIG_ARMV7_SECURE_BASE + sz + 1);
+       invalidate_icache_all();
+#endif
+}
+
 static void kick_secondary_cpus_gic(unsigned long gicdaddr)
 {
        /* kick all CPUs (except this one) by writing to GICD_SGIR */
@@ -83,35 +71,7 @@ void __weak smp_kick_all_cpus(void)
        kick_secondary_cpus_gic(gic_dist_addr);
 }
 
-int armv7_switch_hyp(void)
-{
-       unsigned int reg;
-
-       /* check whether we are in HYP mode already */
-       if ((read_cpsr() & 0x1f) == 0x1a) {
-               debug("CPU already in HYP mode\n");
-               return 0;
-       }
-
-       /* check whether the CPU supports the virtualization extensions */
-       reg = read_id_pfr1();
-       if ((reg & CPUID_ARM_VIRT_MASK) != 1 << CPUID_ARM_VIRT_SHIFT) {
-               printf("HYP mode: Virtualization extensions not implemented.\n");
-               return -1;
-       }
-
-       /* call the HYP switching code on this CPU also */
-       _switch_to_hyp();
-
-       if ((read_cpsr() & 0x1F) != 0x1a) {
-               printf("HYP mode: switch not successful.\n");
-               return -1;
-       }
-
-       return 0;
-}
-
-int armv7_switch_nonsec(void)
+int armv7_init_nonsec(void)
 {
        unsigned int reg;
        unsigned itlinesnr, i;
@@ -147,11 +107,13 @@ int armv7_switch_nonsec(void)
        for (i = 1; i <= itlinesnr; i++)
                writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
 
-       smp_set_core_boot_addr((unsigned long)_smp_pen, -1);
+#ifndef CONFIG_ARMV7_PSCI
+       smp_set_core_boot_addr((unsigned long)secure_ram_addr(_smp_pen), -1);
        smp_kick_all_cpus();
+#endif
 
        /* call the non-sec switching code on this CPU also */
-       _nonsec_init();
-
+       relocate_secure_section();
+       secure_ram_addr(_nonsec_init)();
        return 0;
 }