ARM: HYP/non-sec: remove MIDR check to validate CBAR

[karo-tx-uboot.git] / arch / arm / cpu / armv7 / virt-v7.c

diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
index a0b8742464433c22a6a0016bbb08dc2022b61941..651ca4015d04456df3fa172adb9924af2552c4b5 100644 (file)
--- a/arch/arm/cpu/armv7/virt-v7.c
+++ b/arch/arm/cpu/armv7/virt-v7.c
@@ -1,33 +1,19 @@
 /*
  * (C) Copyright 2013
- * Andre Przywara, Linaro
+ * Andre Przywara, Linaro <andre.przywara@linaro.org>
  *
  * Routines to transition ARMv7 processors from secure into non-secure state
+ * and from non-secure SVC into HYP mode
  * needed to enable ARMv7 virtualization for current hypervisors
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
 #include <asm/armv7.h>
 #include <asm/gic.h>
 #include <asm/io.h>
+#include <asm/secure.h>
 
 unsigned long gic_dist_addr;
 
@@ -44,25 +30,8 @@ static unsigned long get_gicd_base_address(void)
 #ifdef CONFIG_ARM_GIC_BASE_ADDRESS
        return CONFIG_ARM_GIC_BASE_ADDRESS + GIC_DIST_OFFSET;
 #else
-       unsigned midr;
        unsigned periphbase;
 
-       /* check whether we are an Cortex-A15 or A7.
-        * The actual HYP switch should work with all CPUs supporting
-        * the virtualization extension, but we need the GIC address,
-        * which we know only for sure for those two CPUs.
-        */
-       asm("mrc p15, 0, %0, c0, c0, 0\n" : "=r"(midr));
-       switch (midr & MIDR_PRIMARY_PART_MASK) {
-       case MIDR_CORTEX_A9_R0P1:
-       case MIDR_CORTEX_A15_R0P0:
-       case MIDR_CORTEX_A7_R0P0:
-               break;
-       default:
-               printf("nonsec: could not determine GIC address.\n");
-               return -1;
-       }
-
        /* get the GIC base address from the CBAR register */
        asm("mrc p15, 4, %0, c15, c0, 0\n" : "=r" (periphbase));
 
@@ -79,6 +48,18 @@ static unsigned long get_gicd_base_address(void)
 #endif
 }
 
+static void relocate_secure_section(void)
+{
+#ifdef CONFIG_ARMV7_SECURE_BASE
+       size_t sz = __secure_end - __secure_start;
+
+       memcpy((void *)CONFIG_ARMV7_SECURE_BASE, __secure_start, sz);
+       flush_dcache_range(CONFIG_ARMV7_SECURE_BASE,
+                          CONFIG_ARMV7_SECURE_BASE + sz + 1);
+       invalidate_icache_all();
+#endif
+}
+
 static void kick_secondary_cpus_gic(unsigned long gicdaddr)
 {
        /* kick all CPUs (except this one) by writing to GICD_SGIR */
@@ -90,7 +71,7 @@ void __weak smp_kick_all_cpus(void)
        kick_secondary_cpus_gic(gic_dist_addr);
 }
 
-int armv7_switch_nonsec(void)
+int armv7_init_nonsec(void)
 {
        unsigned int reg;
        unsigned itlinesnr, i;
@@ -126,11 +107,13 @@ int armv7_switch_nonsec(void)
        for (i = 1; i <= itlinesnr; i++)
                writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
 
-       smp_set_core_boot_addr((unsigned long)_smp_pen, -1);
+#ifndef CONFIG_ARMV7_PSCI
+       smp_set_core_boot_addr((unsigned long)secure_ram_addr(_smp_pen), -1);
        smp_kick_all_cpus();
+#endif
 
        /* call the non-sec switching code on this CPU also */
-       _nonsec_init();
-
+       relocate_secure_section();
+       secure_ram_addr(_nonsec_init)();
        return 0;
 }