arm:am33xx: Make dram_init call sdram_init() in some contexts

[karo-tx-uboot.git] / arch / arm / cpu / tegra30-common / clock.c

diff --git a/arch/arm/cpu/tegra30-common/clock.c b/arch/arm/cpu/tegra30-common/clock.c
index 89c3529c885b50ce589781c5934f8a98336f5a95..80ba2d8c1ca5fa5f315acb3ed593a7aa73b808bd 100644 (file)
--- a/arch/arm/cpu/tegra30-common/clock.c
+++ b/arch/arm/cpu/tegra30-common/clock.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -102,7 +102,7 @@ static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
                MASK_BITS_31_29},
        { CLK(PERIPH),  CLK(CGENERAL),  CLK(SFROM32KHZ), CLK(OSC),
                CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
-               MASK_BITS_29_28}
+               MASK_BITS_31_28}
 };
 
 /*
@@ -581,34 +581,7 @@ enum periph_id clk_id_to_periph_id(int clk_id)
 
 void clock_early_init(void)
 {
-       /*
-        * PLLP output frequency set to 408Mhz
-        * PLLC output frequency set to 228Mhz
-        */
-       switch (clock_get_osc_freq()) {
-       case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
-               clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
-               clock_set_rate(CLOCK_ID_CGENERAL, 456, 12, 1, 8);
-               break;
-
-       case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
-               clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
-               clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
-               break;
-
-       case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
-               clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
-               clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
-               break;
-       case CLOCK_OSC_FREQ_19_2:
-       default:
-               /*
-                * These are not supported. It is too early to print a
-                * message and the UART likely won't work anyway due to the
-                * oscillator being wrong.
-                */
-               break;
-       }
+       tegra30_set_up_pllp();
 }
 
 void arch_timer_init(void)