sunxi: dts: Sync with kernel

[karo-tx-uboot.git] / arch / arm / dts / sun7i-a20-cubietruck.dts

diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
index 4611e2f5a99e85577f4ba7ad7363e7878049305b..e6b019232a9e880ea48a9b7f9dd975f6846be84e 100644 (file)
--- a/arch/arm/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
@@ -88,15 +88,11 @@
                };
        };
 
-       reg_vmmc3: vmmc3 {
-               compatible = "regulator-fixed";
+       mmc3_pwrseq: mmc3_pwrseq {
+               compatible = "mmc-pwrseq-simple";
                pinctrl-names = "default";
-               pinctrl-0 = <&vmmc3_pin_cubietruck>;
-               regulator-name = "vmmc3";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               enable-active-high;
-               gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
+               pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>;
+               reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
        };
 };
 
@@ -172,7 +168,8 @@
 &mmc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc3_pins_a>;
-       vmmc-supply = <&reg_vmmc3>;
+       vmmc-supply = <&reg_vcc3v3>;
+       mmc-pwrseq = <&mmc3_pwrseq>;
        bus-width = <4>;
        non-removable;
        status = "okay";
@@ -181,7 +178,7 @@
                reg = <1>;
                compatible = "brcm,bcm4329-fmac";
                interrupt-parent = <&pio>;
-               interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+               interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
                interrupt-names = "host-wake";
        };
 };
@@ -199,23 +196,27 @@
        status = "okay";
 };
 
+&otg_sram {
+       status = "okay";
+};
+
 &pio {
-       vmmc3_pin_cubietruck: vmmc3_pin@0 {
-               allwinner,pins = "PH9";
+       ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+               allwinner,pins = "PH12";
                allwinner,function = "gpio_out";
                allwinner,drive = <SUN4I_PINCTRL_10_MA>;
                allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
 
-       ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-               allwinner,pins = "PH12";
+       led_pins_cubietruck: led_pins@0 {
+               allwinner,pins = "PH7", "PH11", "PH20", "PH21";
                allwinner,function = "gpio_out";
                allwinner,drive = <SUN4I_PINCTRL_10_MA>;
                allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
 
-       led_pins_cubietruck: led_pins@0 {
-               allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+       mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
+               allwinner,pins = "PH9";
                allwinner,function = "gpio_out";
                allwinner,drive = <SUN4I_PINCTRL_10_MA>;
                allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -227,6 +228,20 @@
                allwinner,drive = <SUN4I_PINCTRL_10_MA>;
                allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
+
+       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+               allwinner,pins = "PH19";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
+       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+               allwinner,pins = "PH22";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
 };
 
 &pwm {
@@ -288,7 +303,16 @@
        status = "okay";
 };
 
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
 &usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+       usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+       usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;