karo: merge with Ka-Ro specific tree for secure boot support

[karo-tx-uboot.git] / arch / arm / include / asm / arch-am33xx / clocks_am33xx.h

diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
index 1c28fce729beac740f7ee170e375e92b7fe8244b..5657f1846a30614fef2343d20fb608010e4ce751 100644 (file)
--- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
+++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
@@ -3,66 +3,40 @@
  *
  * AM33xx clock define
  *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CLOCKS_AM33XX_H_
 #define _CLOCKS_AM33XX_H_
 
-#define OSC    24
-
-/* MAIN PLL */
-#ifndef CONFIG_SYS_MPU_CLK
-/* default to 500 MHz */
-#define MPUPLL_M       500
-#else
-#define MPUPLL_M       CONFIG_SYS_MPU_CLK
+/* MAIN PLL Fdll supported frequencies */
+#define MPUPLL_M_1000  1000
+#define MPUPLL_M_800   800
+#define MPUPLL_M_720   720
+#define MPUPLL_M_600   600
+#define MPUPLL_M_550   550
+#define MPUPLL_M_300   300
+
+/* MAIN PLL Fdll = 550 MHz, by default */
+#ifndef CONFIG_SYS_MPUCLK
+#define CONFIG_SYS_MPUCLK      MPUPLL_M_550
 #endif
-#define MPUPLL_N       23
-#define MPUPLL_M2      1
-
-/* Core PLL Fdll = 1 GHZ, */
-#define COREPLL_M      1000
-#define COREPLL_N      23
-
-#define COREPLL_M4     10      /* CORE_CLKOUTM4 = 200 MHZ */
-#define COREPLL_M5     8       /* CORE_CLKOUTM5 = 250 MHZ */
-#define COREPLL_M6     4       /* CORE_CLKOUTM6 = 500 MHZ */
-
-/*
- * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll
- * frequency needs to be set to 960 MHZ. Hence,
- * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below
- */
-#define PERPLL_M       960
-#define PERPLL_N       23
-#define PERPLL_M2      5
-
-/* DDR Freq is 266 MHZ for now */
-/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */
-#ifndef CONFIG_SYS_DDR_CLK
-#define DDRPLL_M       266
-#else
-#define DDRPLL_M       CONFIG_SYS_DDR_CLK
-#endif
-#define DDRPLL_N       23
-#define DDRPLL_M2      1
 
 #define DISPPLL_M      200
-#define DISPPLL_N      23
+#define DISPPLL_N      (OSC - 1)
 #define DISPPLL_M2     1
 
-extern void pll_init(void);
-extern void enable_emif_clocks(void);
+#define UART_RESET             (0x1 << 1)
+#define UART_CLK_RUNNING_MASK  0x1
+#define UART_SMART_IDLE_EN     (0x1 << 0x3)
+
+#define CM_DLL_CTRL_NO_OVERRIDE        0x0
+#define CM_DLL_READYST         0x4
+
+extern void enable_dmm_clocks(void);
+extern const struct dpll_params dpll_core_opp100;
+extern struct dpll_params dpll_mpu_opp100;
 
 #endif /* endif _CLOCKS_AM33XX_H_ */