* Power Management Controller (PMC) - System peripherals registers.
* Based on AT91RM9200 datasheet revision E.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef AT91_PMC_H
#define AT91_PMC_H
-#define AT91_ASM_PMC_MOR (AT91_PMC_BASE + 0x20)
-#define AT91_ASM_PMC_PLLAR (AT91_PMC_BASE + 0x28)
-#define AT91_ASM_PMC_PLLBR (AT91_PMC_BASE + 0x2c)
-#define AT91_ASM_PMC_MCKR (AT91_PMC_BASE + 0x30)
-#define AT91_ASM_PMC_SR (AT91_PMC_BASE + 0x68)
+#ifdef __ASSEMBLY__
-#ifndef __ASSEMBLY__
+#define AT91_ASM_PMC_MOR (ATMEL_BASE_PMC + 0x20)
+#define AT91_ASM_PMC_PLLAR (ATMEL_BASE_PMC + 0x28)
+#define AT91_ASM_PMC_PLLBR (ATMEL_BASE_PMC + 0x2c)
+#define AT91_ASM_PMC_MCKR (ATMEL_BASE_PMC + 0x30)
+#define AT91_ASM_PMC_SR (ATMEL_BASE_PMC + 0x68)
+
+#else
#include <asm/types.h>
u32 reserved5[21];
u32 wpmr; /* 0xE4 Write Protect Mode Register (CAP0) */
u32 wpsr; /* 0xE8 Write Protect Status Register (CAP0) */
+#ifdef CONFIG_SAMA5D3
+ u32 reserved6[8];
+ u32 pcer1; /* 0x100 Periperial Clock Enable Register 1 */
+ u32 pcdr1; /* 0x104 Periperial Clock Disable Register 1 */
+ u32 pcsr1; /* 0x108 Periperial Clock Status Register 1 */
+ u32 pcr; /* 0x10c Periperial Control Register */
+ u32 ocr; /* 0x110 Oscillator Calibration Register */
+#else
u32 reserved8[5];
+#endif
} at91_pmc_t;
#endif /* end not assembly */
#define AT91_PMC_MOR_MOSCEN 0x01
#define AT91_PMC_MOR_OSCBYPASS 0x02
+#define AT91_PMC_MOR_MOSCRCEN 0x08
#define AT91_PMC_MOR_OSCOUNT(x) ((x & 0xff) << 8)
+#define AT91_PMC_MOR_KEY(x) ((x & 0xff) << 16)
+#define AT91_PMC_MOR_MOSCSEL (1 << 24)
#define AT91_PMC_PLLXR_DIV(x) (x & 0xFF)
#define AT91_PMC_PLLXR_PLLCOUNT(x) ((x & 0x3F) << 8)
#define AT91_PMC_PLLXR_OUT(x) ((x & 0x03) << 14)
+#ifdef CONFIG_SAMA5D3
+#define AT91_PMC_PLLXR_MUL(x) ((x & 0x7F) << 18)
+#else
#define AT91_PMC_PLLXR_MUL(x) ((x & 0x7FF) << 16)
+#endif
#define AT91_PMC_PLLAR_29 0x20000000
#define AT91_PMC_PLLBR_USBDIV_1 0x00000000
#define AT91_PMC_PLLBR_USBDIV_2 0x10000000
#define AT91_PMC_MCKR_CSS_PLLB 0x00000003
#define AT91_PMC_MCKR_CSS_MASK 0x00000003
+#ifdef CONFIG_SAMA5D3
+#define AT91_PMC_MCKR_PRES_1 0x00000000
+#define AT91_PMC_MCKR_PRES_2 0x00000010
+#define AT91_PMC_MCKR_PRES_4 0x00000020
+#define AT91_PMC_MCKR_PRES_8 0x00000030
+#define AT91_PMC_MCKR_PRES_16 0x00000040
+#define AT91_PMC_MCKR_PRES_32 0x00000050
+#define AT91_PMC_MCKR_PRES_64 0x00000060
+#define AT91_PMC_MCKR_PRES_MASK 0x00000070
+#else
#define AT91_PMC_MCKR_PRES_1 0x00000000
#define AT91_PMC_MCKR_PRES_2 0x00000004
#define AT91_PMC_MCKR_PRES_4 0x00000008
#define AT91_PMC_MCKR_PRES_32 0x00000014
#define AT91_PMC_MCKR_PRES_64 0x00000018
#define AT91_PMC_MCKR_PRES_MASK 0x0000001C
+#endif
+#ifdef CONFIG_AT91RM9200
#define AT91_PMC_MCKR_MDIV_1 0x00000000
#define AT91_PMC_MCKR_MDIV_2 0x00000100
+#define AT91_PMC_MCKR_MDIV_3 0x00000200
+#define AT91_PMC_MCKR_MDIV_4 0x00000300
+#define AT91_PMC_MCKR_MDIV_MASK 0x00000300
+#else
+#define AT91_PMC_MCKR_MDIV_1 0x00000000
+#define AT91_PMC_MCKR_MDIV_2 0x00000100
+#ifdef CONFIG_SAMA5D3
+#define AT91_PMC_MCKR_MDIV_3 0x00000300
+#endif
#define AT91_PMC_MCKR_MDIV_4 0x00000200
#define AT91_PMC_MCKR_MDIV_MASK 0x00000300
+#endif
-#define AT91_PMC_MCKR_PLLADIV_1 0x00001000
-#define AT91_PMC_MCKR_PLLADIV_2 0x00002000
+#define AT91_PMC_MCKR_PLLADIV_1 0x00000000
+#define AT91_PMC_MCKR_PLLADIV_2 0x00001000
#define AT91_PMC_IXR_MOSCS 0x00000001
#define AT91_PMC_IXR_LOCKA 0x00000002
#define AT91_PMC_IXR_PCKRDY1 0x00000200
#define AT91_PMC_IXR_PCKRDY2 0x00000400
#define AT91_PMC_IXR_PCKRDY3 0x00000800
-
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
-#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
-
-#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
-#endif
+#define AT91_PMC_IXR_MOSCSELS 0x00010000
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
-#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
-#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-
-#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
-#endif
-
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
-#endif
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
-#endif
+
#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
-#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
-#endif
+
#define AT91_PMC_DIV (0xff << 0) /* Divider */
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
#define AT91_PMC_PLLA_WR_ERRATA (1 << 29) /* Bit 29 must always be set to 1 when programming the CKGR_PLLAR register */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
-#endif
#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
#define AT91_PMC_CSS_SLOW (0 << 0)
#define AT91_PMC_CSS_MAIN (1 << 0)
#define AT91_PMC_PDIV_1 (0 << 12)
#define AT91_PMC_PDIV_2 (1 << 12)
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register */
-#endif
#define AT91_PMC_USBS_USB_PLLA (0x0) /* USB Clock Input is PLLA */
#define AT91_PMC_USBS_USB_UPLL (0x1) /* USB Clock Input is UPLL */
+#define AT91_PMC_USBS_USB_PLLB (0x1) /* USB Clock Input is PLLB, AT91SAM9N12 only */
+#define AT91_PMC_USB_DIV_2 (0x1 << 8) /* USB Clock divided by 2 */
#define AT91_PMC_USBDIV_8 (0x7 << 8) /* USB Clock divided by 8 */
#define AT91_PMC_USBDIV_10 (0x9 << 8) /* USB Clock divided by 10 */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
-
-#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
-#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
-#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
-#endif
#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
-#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */
-#endif
#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */
-#ifdef CONFIG_AT91_LEGACY
-#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
-#endif /* CONFIG_AT91_LEGACY */
#endif
projects / karo-tx-uboot.git / blobdiff