u32 test;
};
-/* Watchdog Timer (WDOG) registers */
-#define WDOG_ENABLE (1 << 2)
-#define WDOG_WT_SHIFT 8
-#define WDOG_WDZST (1 << 0)
-
-struct wdog_regs {
- u16 wcr; /* Control */
- u16 wsr; /* Service */
- u16 wrsr; /* Reset Status */
-};
-
-/* IIM Control Registers */
+/* IIM control registers */
struct iim_regs {
u32 iim_stat;
u32 iim_statm;
u32 iim_sdat;
u32 iim_prev;
u32 iim_srev;
- u32 iim_prog_p;
+ u32 iim_prg_p;
u32 iim_scs0;
u32 iim_scs1;
u32 iim_scs2;
u32 iim_scs3;
+ u32 res[0x1f1];
+ struct fuse_bank {
+ u32 fuse_regs[0x20];
+ u32 fuse_rsvd[0xe0];
+ } bank[3];
+};
+
+struct fuse_bank0_regs {
+ u32 fuse0_5[6];
+ u32 usr;
+ u32 fuse7_15[9];
+};
+
+struct fuse_bank2_regs {
+ u32 fuse0;
+ u32 uid[8];
+ u32 fuse9_15[7];
};
struct iomuxc_regs {
#endif
+#define ARCH_MXC
+
#define __REG(x) (*((volatile u32 *)(x)))
#define __REG16(x) (*((volatile u16 *)(x)))
#define __REG8(x) (*((volatile u8 *)(x)))
#define CCMR_CKIH (2 << 1)
#define MX31_IIM_BASE_ADDR 0x5001C000
+#define IIM_BASE_ADDR MX31_IIM_BASE_ADDR
-#define PDR0_CSI_PODF(x) (((x) & 0x1ff) << 23)
+#define PDR0_CSI_PODF(x) (((x) & 0x3f) << 26)
+#define PDR0_CSI_PRDF(x) (((x) & 0x7) << 23)
#define PDR0_PER_PODF(x) (((x) & 0x1f) << 16)
#define PDR0_HSP_PODF(x) (((x) & 0x7) << 11)
#define PDR0_NFC_PODF(x) (((x) & 0x7) << 8)
#define PDR0_MAX_PODF(x) (((x) & 0x7) << 3)
#define PDR0_MCU_PODF(x) ((x) & 0x7)
+#define PDR1_USB_PRDF(x) (((x) & 0x3) << 30)
+#define PDR1_USB_PODF(x) (((x) & 0x7) << 27)
+#define PDR1_FIRI_PRDF(x) (((x) & 0x7) << 24)
+#define PDR1_FIRI_PODF(x) (((x) & 0x3f) << 18)
+#define PDR1_SSI2_PRDF(x) (((x) & 0x7) << 15)
+#define PDR1_SSI2_PODF(x) (((x) & 0x3f) << 9)
+#define PDR1_SSI1_PRDF(x) (((x) & 0x7) << 6)
+#define PDR1_SSI1_PODF(x) ((x) & 0x3f)
+
+#define PLL_BRMO(x) (((x) & 0x1) << 31)
#define PLL_PD(x) (((x) & 0xf) << 26)
#define PLL_MFD(x) (((x) & 0x3ff) << 16)
#define PLL_MFI(x) (((x) & 0xf) << 10)
#define PLL_MFN(x) (((x) & 0x3ff) << 0)
-#define GET_PDR0_CSI_PODF(x) (((x) >> 23) & 0x1ff)
+#define GET_PDR0_CSI_PODF(x) (((x) >> 26) & 0x3f)
+#define GET_PDR0_CSI_PRDF(x) (((x) >> 23) & 0x7)
#define GET_PDR0_PER_PODF(x) (((x) >> 16) & 0x1f)
#define GET_PDR0_HSP_PODF(x) (((x) >> 11) & 0x7)
#define GET_PDR0_NFC_PODF(x) (((x) >> 8) & 0x7)
#define UART4_BASE 0x43FB0000
#define UART5_BASE 0x43FB4000
+#define I2C1_BASE_ADDR 0x43f80000
+#define I2C1_CLK_OFFSET 26
+#define I2C2_BASE_ADDR 0x43F98000
+#define I2C2_CLK_OFFSET 28
+#define I2C3_BASE_ADDR 0x43f84000
+#define I2C3_CLK_OFFSET 30
+
#define ESDCTL_SDE (1 << 31)
#define ESDCTL_CMD_RW (0 << 28)
#define ESDCTL_CMD_PRECHARGE (1 << 28)
#define IPU_CONF_PF_EN (1<<3)
#define IPU_CONF_ROT_EN (1<<2)
#define IPU_CONF_IC_EN (1<<1)
-#define IPU_CONF_SCI_EN (1<<0)
+#define IPU_CONF_CSI_EN (1<<0)
#define ARM_PPMRR 0x40000015
-#define WDOG_BASE 0x53FDC000
+#define WDOG1_BASE_ADDR 0x53FDC000
/*
* GPIO
#define MUX_CTL_CSPI3_SPI_RDY 0x0e
#define MUX_CTL_CSPI3_MOSI 0x13
+#define MUX_CTL_SD1_DATA1 0x18
+#define MUX_CTL_SD1_DATA2 0x19
+#define MUX_CTL_SD1_DATA3 0x1a
+#define MUX_CTL_SD1_CMD 0x1d
+#define MUX_CTL_SD1_CLK 0x1e
+#define MUX_CTL_SD1_DATA0 0x1f
+
#define MUX_CTL_USBH2_DATA1 0x40
#define MUX_CTL_USBH2_DIR 0x44
#define MUX_CTL_USBH2_STP 0x45
*/
#define NFC_BASE_ADDR 0xB8000000
+/* SD card controller */
+#define SDHC1_BASE_ADDR 0x50004000
+#define SDHC2_BASE_ADDR 0x50008000
+
/*
* Internal RAM (16KB)
*/
#define MX31_AIPS1_BASE_ADDR 0x43f00000
#define IMX_USB_BASE (MX31_AIPS1_BASE_ADDR + 0x88000)
+#define IMX_USB_PORT_OFFSET 0x200
-/* USB portsc */
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
-#define MXC_EHCI_FORCE_FS (1 << 24)
-#define MXC_EHCI_UTMI_8BIT (0 << 28)
-#define MXC_EHCI_UTMI_16BIT (1 << 28)
-#define MXC_EHCI_SERIAL (1 << 29)
-#define MXC_EHCI_MODE_UTMI (0 << 30)
-#define MXC_EHCI_MODE_PHILIPS (1 << 30)
-#define MXC_EHCI_MODE_ULPI (2 << 30)
-#define MXC_EHCI_MODE_SERIAL (3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
-#define MXC_EHCI_INTERFACE_MASK (0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
-#define MXC_EHCI_TTL_ENABLED (1 << 6)
-
-#define MXC_EHCI_INTERNAL_PHY (1 << 7)
-#define MXC_EHCI_IPPUE_DOWN (1 << 8)
-#define MXC_EHCI_IPPUE_UP (1 << 9)
+/*
+ * CSPI register definitions
+ */
+#define MXC_CSPI
+#define MXC_CSPICTRL_EN (1 << 0)
+#define MXC_CSPICTRL_MODE (1 << 1)
+#define MXC_CSPICTRL_XCH (1 << 2)
+#define MXC_CSPICTRL_SMC (1 << 3)
+#define MXC_CSPICTRL_POL (1 << 4)
+#define MXC_CSPICTRL_PHA (1 << 5)
+#define MXC_CSPICTRL_SSCTL (1 << 6)
+#define MXC_CSPICTRL_SSPOL (1 << 7)
+#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 24)
+#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0x1f) << 8)
+#define MXC_CSPICTRL_DATARATE(x) (((x) & 0x7) << 16)
+#define MXC_CSPICTRL_TC (1 << 8)
+#define MXC_CSPICTRL_RXOVF (1 << 6)
+#define MXC_CSPICTRL_MAXBITS 0x1f
+
+#define MXC_CSPIPERIOD_32KHZ (1 << 15)
+#define MAX_SPI_BYTES 4
+
+#define MXC_SPI_BASE_ADDRESSES \
+ 0x43fa4000, \
+ 0x50010000, \
+ 0x53f84000,
#endif /* __ASM_ARCH_MX31_IMX_REGS_H */
projects / karo-tx-uboot.git / blobdiff