u32 test;
};
-/* Watchdog Timer (WDOG) registers */
-#define WDOG_ENABLE (1 << 2)
-#define WDOG_WT_SHIFT 8
-#define WDOG_WDZST (1 << 0)
-
-struct wdog_regs {
- u16 wcr; /* Control */
- u16 wsr; /* Service */
- u16 wrsr; /* Reset Status */
-};
-
-/* IIM Control Registers */
+/* IIM control registers */
struct iim_regs {
u32 iim_stat;
u32 iim_statm;
u32 iim_sdat;
u32 iim_prev;
u32 iim_srev;
- u32 iim_prog_p;
+ u32 iim_prg_p;
u32 iim_scs0;
u32 iim_scs1;
u32 iim_scs2;
u32 iim_scs3;
+ u32 res[0x1f1];
+ struct fuse_bank {
+ u32 fuse_regs[0x20];
+ u32 fuse_rsvd[0xe0];
+ } bank[3];
+};
+
+struct fuse_bank0_regs {
+ u32 fuse0_5[6];
+ u32 usr;
+ u32 fuse7_15[9];
+};
+
+struct fuse_bank2_regs {
+ u32 fuse0;
+ u32 uid[8];
+ u32 fuse9_15[7];
+};
+
+struct iomuxc_regs {
+ u32 unused1;
+ u32 unused2;
+ u32 gpr;
};
struct mx3_cpu_type {
MX31_PIN_CAPTURE = IOMUX_PIN(7, 327),
};
+/*
+ * various IOMUX general purpose functions
+ */
+enum iomux_gp_func {
+ MUX_PGP_FIRI = 1 << 0,
+ MUX_DDR_MODE = 1 << 1,
+ MUX_PGP_CSPI_BB = 1 << 2,
+ MUX_PGP_ATA_1 = 1 << 3,
+ MUX_PGP_ATA_2 = 1 << 4,
+ MUX_PGP_ATA_3 = 1 << 5,
+ MUX_PGP_ATA_4 = 1 << 6,
+ MUX_PGP_ATA_5 = 1 << 7,
+ MUX_PGP_ATA_6 = 1 << 8,
+ MUX_PGP_ATA_7 = 1 << 9,
+ MUX_PGP_ATA_8 = 1 << 10,
+ MUX_PGP_UH2 = 1 << 11,
+ MUX_SDCTL_CSD0_SEL = 1 << 12,
+ MUX_SDCTL_CSD1_SEL = 1 << 13,
+ MUX_CSPI1_UART3 = 1 << 14,
+ MUX_EXTDMAREQ2_MBX_SEL = 1 << 15,
+ MUX_TAMPER_DETECT_EN = 1 << 16,
+ MUX_PGP_USB_4WIRE = 1 << 17,
+ MUX_PGP_USB_COMMON = 1 << 18,
+ MUX_SDHC_MEMSTICK1 = 1 << 19,
+ MUX_SDHC_MEMSTICK2 = 1 << 20,
+ MUX_PGP_SPLL_BYP = 1 << 21,
+ MUX_PGP_UPLL_BYP = 1 << 22,
+ MUX_PGP_MSHC1_CLK_SEL = 1 << 23,
+ MUX_PGP_MSHC2_CLK_SEL = 1 << 24,
+ MUX_CSPI3_UART5_SEL = 1 << 25,
+ MUX_PGP_ATA_9 = 1 << 26,
+ MUX_PGP_USB_SUSPEND = 1 << 27,
+ MUX_PGP_USB_OTG_LOOPBACK = 1 << 28,
+ MUX_PGP_USB_HS1_LOOPBACK = 1 << 29,
+ MUX_PGP_USB_HS2_LOOPBACK = 1 << 30,
+ MUX_CLKO_DDR_MODE = 1 << 31,
+};
+
/* Bit definitions for RCSR register in CCM */
#define CCM_RCSR_NF16B (1 << 31)
#define CCM_RCSR_NFMS (1 << 30)
+/* WEIM CS control registers */
+struct mx31_weim_cscr {
+ u32 upper;
+ u32 lower;
+ u32 additional;
+ u32 reserved;
+};
+
+struct mx31_weim {
+ struct mx31_weim_cscr cscr[6];
+};
+
+/* ESD control registers */
+struct esdc_regs {
+ u32 ctl0;
+ u32 cfg0;
+ u32 ctl1;
+ u32 cfg1;
+ u32 misc;
+ u32 dly[5];
+ u32 dlyl;
+};
+
#endif
+#define ARCH_MXC
+
#define __REG(x) (*((volatile u32 *)(x)))
#define __REG16(x) (*((volatile u16 *)(x)))
#define __REG8(x) (*((volatile u8 *)(x)))
#define CCMR_CKIH (2 << 1)
#define MX31_IIM_BASE_ADDR 0x5001C000
+#define IIM_BASE_ADDR MX31_IIM_BASE_ADDR
-#define PDR0_CSI_PODF(x) (((x) & 0x1ff) << 23)
+#define PDR0_CSI_PODF(x) (((x) & 0x3f) << 26)
+#define PDR0_CSI_PRDF(x) (((x) & 0x7) << 23)
#define PDR0_PER_PODF(x) (((x) & 0x1f) << 16)
#define PDR0_HSP_PODF(x) (((x) & 0x7) << 11)
#define PDR0_NFC_PODF(x) (((x) & 0x7) << 8)
#define PDR0_MAX_PODF(x) (((x) & 0x7) << 3)
#define PDR0_MCU_PODF(x) ((x) & 0x7)
+#define PDR1_USB_PRDF(x) (((x) & 0x3) << 30)
+#define PDR1_USB_PODF(x) (((x) & 0x7) << 27)
+#define PDR1_FIRI_PRDF(x) (((x) & 0x7) << 24)
+#define PDR1_FIRI_PODF(x) (((x) & 0x3f) << 18)
+#define PDR1_SSI2_PRDF(x) (((x) & 0x7) << 15)
+#define PDR1_SSI2_PODF(x) (((x) & 0x3f) << 9)
+#define PDR1_SSI1_PRDF(x) (((x) & 0x7) << 6)
+#define PDR1_SSI1_PODF(x) ((x) & 0x3f)
+
+#define PLL_BRMO(x) (((x) & 0x1) << 31)
#define PLL_PD(x) (((x) & 0xf) << 26)
#define PLL_MFD(x) (((x) & 0x3ff) << 16)
#define PLL_MFI(x) (((x) & 0xf) << 10)
#define PLL_MFN(x) (((x) & 0x3ff) << 0)
-#define GET_PDR0_CSI_PODF(x) (((x) >> 23) & 0x1ff)
+#define GET_PDR0_CSI_PODF(x) (((x) >> 26) & 0x3f)
+#define GET_PDR0_CSI_PRDF(x) (((x) >> 23) & 0x7)
#define GET_PDR0_PER_PODF(x) (((x) >> 16) & 0x1f)
#define GET_PDR0_HSP_PODF(x) (((x) >> 11) & 0x7)
#define GET_PDR0_NFC_PODF(x) (((x) >> 8) & 0x7)
#define WEIM_ESDCFG1 0xB800100C
#define WEIM_ESDMISC 0xB8001010
+#define UART1_BASE 0x43F90000
+#define UART2_BASE 0x43F94000
+#define UART3_BASE 0x5000C000
+#define UART4_BASE 0x43FB0000
+#define UART5_BASE 0x43FB4000
+
+#define I2C1_BASE_ADDR 0x43f80000
+#define I2C1_CLK_OFFSET 26
+#define I2C2_BASE_ADDR 0x43F98000
+#define I2C2_CLK_OFFSET 28
+#define I2C3_BASE_ADDR 0x43f84000
+#define I2C3_CLK_OFFSET 30
+
#define ESDCTL_SDE (1 << 31)
#define ESDCTL_CMD_RW (0 << 28)
#define ESDCTL_CMD_PRECHARGE (1 << 28)
#define ESDCTL_BL(x) ((x) << 7)
#define ESDCTL_PRCT(x) ((x) << 0)
+#define ESDCTL_BASE_ADDR 0xB8001000
+
+/* 13 fields of the upper CS control register */
+#define CSCR_U(sp, wp, bcd, bcs, psz, pme, sync, dol, \
+ cnc, wsc, ew, wws, edc) \
+ ((sp) << 31 | (wp) << 30 | (bcd) << 28 | (psz) << 22 | (pme) << 21 |\
+ (sync) << 20 | (dol) << 16 | (cnc) << 14 | (wsc) << 8 | (ew) << 7 |\
+ (wws) << 4 | (edc) << 0)
+/* 12 fields of the lower CS control register */
+#define CSCR_L(oea, oen, ebwa, ebwn, \
+ csa, ebc, dsz, csn, psr, cre, wrap, csen) \
+ ((oea) << 28 | (oen) << 24 | (ebwa) << 20 | (ebwn) << 16 |\
+ (csa) << 12 | (ebc) << 11 | (dsz) << 8 | (csn) << 4 |\
+ (psr) << 3 | (cre) << 2 | (wrap) << 1 | (csen) << 0)
+/* 14 fields of the additional CS control register */
+#define CSCR_A(ebra, ebrn, rwa, rwn, mum, lah, lbn, lba, dww, dct, \
+ wwu, age, cnc2, fce) \
+ ((ebra) << 28 | (ebrn) << 24 | (rwa) << 20 | (rwn) << 16 |\
+ (mum) << 15 | (lah) << 13 | (lbn) << 10 | (lba) << 8 |\
+ (dww) << 6 | (dct) << 4 | (wwu) << 3 |\
+ (age) << 2 | (cnc2) << 1 | (fce) << 0)
+
#define WEIM_BASE 0xb8002000
-#define CSCR_U(x) (WEIM_BASE + (x) * 0x10)
-#define CSCR_L(x) (WEIM_BASE + 4 + (x) * 0x10)
-#define CSCR_A(x) (WEIM_BASE + 8 + (x) * 0x10)
#define IOMUXC_BASE 0x43FAC000
-#define IOMUXC_GPR (IOMUXC_BASE + 0x8)
#define IOMUXC_SW_MUX_CTL(x) (IOMUXC_BASE + 0xc + (x) * 4)
#define IOMUXC_SW_PAD_CTL(x) (IOMUXC_BASE + 0x154 + (x) * 4)
#define IPU_CONF_PF_EN (1<<3)
#define IPU_CONF_ROT_EN (1<<2)
#define IPU_CONF_IC_EN (1<<1)
-#define IPU_CONF_SCI_EN (1<<0)
+#define IPU_CONF_CSI_EN (1<<0)
#define ARM_PPMRR 0x40000015
-#define WDOG_BASE 0x53FDC000
+#define WDOG1_BASE_ADDR 0x53FDC000
/*
* GPIO
/* Register offsets based on IOMUXC_BASE */
/* 0x00 .. 0x7b */
+#define MUX_CTL_CSPI3_MISO 0x0c
+#define MUX_CTL_CSPI3_SCLK 0x0d
+#define MUX_CTL_CSPI3_SPI_RDY 0x0e
+#define MUX_CTL_CSPI3_MOSI 0x13
+
+#define MUX_CTL_SD1_DATA1 0x18
+#define MUX_CTL_SD1_DATA2 0x19
+#define MUX_CTL_SD1_DATA3 0x1a
+#define MUX_CTL_SD1_CMD 0x1d
+#define MUX_CTL_SD1_CLK 0x1e
+#define MUX_CTL_SD1_DATA0 0x1f
+
#define MUX_CTL_USBH2_DATA1 0x40
#define MUX_CTL_USBH2_DIR 0x44
#define MUX_CTL_USBH2_STP 0x45
#define MUX_CTL_USBH2_NXT 0x46
#define MUX_CTL_USBH2_DATA0 0x47
#define MUX_CTL_USBH2_CLK 0x4B
+
+#define MUX_CTL_TXD2 0x70
+#define MUX_CTL_RTS2 0x71
+#define MUX_CTL_CTS2 0x72
+#define MUX_CTL_RXD2 0x77
+
#define MUX_CTL_RTS1 0x7c
#define MUX_CTL_CTS1 0x7d
#define MUX_CTL_DTR_DCE1 0x7e
#define MUX_RTS1__UART1_RTS_B IOMUX_MODE(MUX_CTL_RTS1, MUX_CTL_FUNC)
#define MUX_CTS1__UART1_CTS_B IOMUX_MODE(MUX_CTL_CTS1, MUX_CTL_FUNC)
+#define MUX_RXD2__UART2_RXD_MUX IOMUX_MODE(MUX_CTL_RXD2, MUX_CTL_FUNC)
+#define MUX_TXD2__UART2_TXD_MUX IOMUX_MODE(MUX_CTL_TXD2, MUX_CTL_FUNC)
+#define MUX_RTS2__UART2_RTS_B IOMUX_MODE(MUX_CTL_RTS2, MUX_CTL_FUNC)
+#define MUX_CTS2__UART2_CTS_B IOMUX_MODE(MUX_CTL_CTS2, MUX_CTL_FUNC)
+
#define MUX_CSPI2_SS0__CSPI2_SS0_B IOMUX_MODE(MUX_CTL_CSPI2_SS0, MUX_CTL_FUNC)
#define MUX_CSPI2_SS1__CSPI2_SS1_B IOMUX_MODE(MUX_CTL_CSPI2_SS1, MUX_CTL_FUNC)
#define MUX_CSPI2_SS2__CSPI2_SS2_B IOMUX_MODE(MUX_CTL_CSPI2_SS2, MUX_CTL_FUNC)
*/
#define NFC_BASE_ADDR 0xB8000000
+/* SD card controller */
+#define SDHC1_BASE_ADDR 0x50004000
+#define SDHC2_BASE_ADDR 0x50008000
+
/*
* Internal RAM (16KB)
*/
#define MX31_AIPS1_BASE_ADDR 0x43f00000
#define IMX_USB_BASE (MX31_AIPS1_BASE_ADDR + 0x88000)
+#define IMX_USB_PORT_OFFSET 0x200
-/* USB portsc */
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
-#define MXC_EHCI_FORCE_FS (1 << 24)
-#define MXC_EHCI_UTMI_8BIT (0 << 28)
-#define MXC_EHCI_UTMI_16BIT (1 << 28)
-#define MXC_EHCI_SERIAL (1 << 29)
-#define MXC_EHCI_MODE_UTMI (0 << 30)
-#define MXC_EHCI_MODE_PHILIPS (1 << 30)
-#define MXC_EHCI_MODE_ULPI (2 << 30)
-#define MXC_EHCI_MODE_SERIAL (3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
-#define MXC_EHCI_INTERFACE_MASK (0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
-#define MXC_EHCI_TTL_ENABLED (1 << 6)
-
-#define MXC_EHCI_INTERNAL_PHY (1 << 7)
-#define MXC_EHCI_IPPUE_DOWN (1 << 8)
-#define MXC_EHCI_IPPUE_UP (1 << 9)
+/*
+ * CSPI register definitions
+ */
+#define MXC_CSPI
+#define MXC_CSPICTRL_EN (1 << 0)
+#define MXC_CSPICTRL_MODE (1 << 1)
+#define MXC_CSPICTRL_XCH (1 << 2)
+#define MXC_CSPICTRL_SMC (1 << 3)
+#define MXC_CSPICTRL_POL (1 << 4)
+#define MXC_CSPICTRL_PHA (1 << 5)
+#define MXC_CSPICTRL_SSCTL (1 << 6)
+#define MXC_CSPICTRL_SSPOL (1 << 7)
+#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 24)
+#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0x1f) << 8)
+#define MXC_CSPICTRL_DATARATE(x) (((x) & 0x7) << 16)
+#define MXC_CSPICTRL_TC (1 << 8)
+#define MXC_CSPICTRL_RXOVF (1 << 6)
+#define MXC_CSPICTRL_MAXBITS 0x1f
+
+#define MXC_CSPIPERIOD_32KHZ (1 << 15)
+#define MAX_SPI_BYTES 4
+
+#define MXC_SPI_BASE_ADDRESSES \
+ 0x43fa4000, \
+ 0x50010000, \
+ 0x53f84000,
#endif /* __ASM_ARCH_MX31_IMX_REGS_H */
projects / karo-tx-uboot.git / blobdiff