Add initial support for Wandboard dual lite and solo.

[karo-tx-uboot.git] / arch / arm / include / asm / arch-mx6 / mx6dl_pins.h

diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index 9494e4126a1c9a249938c0c3e345c1621f2efd47..9846f1bcb5a8fd15fe4e107a7912fc6dbfa187f1 100644 (file)
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -50,6 +50,8 @@
 #define NO_MUX_I                0
 #define NO_PAD_I                0
 enum {
+       MX6_PAD_CSI0_DAT10__UART1_TXD           = IOMUX_PAD(0x0360, 0x004C, 3, 0x0000, 0, 0),
+       MX6_PAD_CSI0_DAT11__UART1_RXD           = IOMUX_PAD(0x0364, 0x0050, 3, 0x08FC, 1, 0),
        MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
        MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15       = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
        MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
@@ -90,6 +92,7 @@ enum {
        MX6_PAD_EIM_D27__UART2_RXD              = IOMUX_PAD(0x0540, 0x0170, 4, 0x0904, 1, 0),
        MX6_PAD_EIM_D28__I2C1_SDA               = IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0),
        MX6_PAD_EIM_D28__GPIO_3_28              = IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0),
+       MX6_PAD_EIM_D29__GPIO_3_29              = IOMUX_PAD(0x0548, 0x0178, 5, 0x0000, 0, 0),
        MX6_PAD_ENET_MDC__ENET_MDC              = IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0,  0),
        MX6_PAD_ENET_MDIO__ENET_MDIO            = IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0),
        MX6_PAD_ENET_REF_CLK__ENET_TX_CLK       = IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0),