omap_gpmc: change nandecc command

[karo-tx-uboot.git] / arch / arm / include / asm / arch-omap3 / sys_proto.h

diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
index 34bd515b05f4164d207f6fd478672a01bddde333..dae1312469b21ceb66bb53ca623a27ab89b32ddd 100644 (file)
--- a/arch/arm/include/asm/arch-omap3/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
@@ -27,12 +27,31 @@ typedef struct {
        char *nand_string;
 } omap3_sysinfo;
 
+struct emu_hal_params {
+       u32 num_params;
+       u32 param1;
+};
+
+/* Board SDRC timing values */
+struct board_sdrc_timings {
+       u32 mcfg;
+       u32 ctrla;
+       u32 ctrlb;
+       u32 rfr_ctrl;
+       u32 mr;
+};
+
 void prcm_init(void);
 void per_clocks_enable(void);
+void ehci_clocks_enable(void);
 
 void memif_init(void);
 void sdrc_init(void);
 void do_sdrc_init(u32, u32);
+
+void get_board_mem_timings(struct board_sdrc_timings *timings);
+void identify_nand_chip(int *mfr, int *id);
+void emif4_init(void);
 void gpmc_init(void);
 void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
                        u32 size);
@@ -40,21 +59,18 @@ void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
 void watchdog_init(void);
 void set_muxconf_regs(void);
 
+u32 get_cpu_family(void);
 u32 get_cpu_rev(void);
-u32 get_mem_type(void);
+u32 get_sku_id(void);
 u32 get_sysboot_value(void);
 u32 is_gpmc_muxed(void);
 u32 get_gpmc0_type(void);
 u32 get_gpmc0_width(void);
-u32 get_sdr_cs_size(u32);
-u32 get_sdr_cs_offset(u32);
 u32 is_running_in_sdram(void);
 u32 is_running_in_sram(void);
 u32 is_running_in_flash(void);
 u32 get_device_type(void);
-void l2cache_enable(void);
 void secureworld_exit(void);
-void setup_auxcr(void);
 void try_unlock_memory(void);
 u32 get_boot_type(void);
 void invalidate_dcache(u32);
@@ -62,8 +78,10 @@ void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
 void make_cs1_contiguous(void);
-void omap_nand_switch_ecc(int);
+void omap_nand_switch_ecc(uint32_t, uint32_t);
 void power_init_r(void);
 void dieid_num_r(void);
-
+void do_omap3_emu_romcode_call(u32 service_id, u32 parameters);
+void omap3_gp_romcode_call(u32 service_id, u32 parameter);
+u32 warm_reset(void);
 #endif