mtd: nand: omap: merge duplicate GPMC data from different arch-xx headers into common...

[karo-tx-uboot.git] / arch / arm / include / asm / arch-omap4 / sys_proto.h

diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index ad0c640dfd8a511b272c4e6d24f0c9e7dcd5522c..ea8b72c431c0c846e7dacb48dc87c5bcd31b686a 100644 (file)
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -2,38 +2,106 @@
  * (C) Copyright 2010
  * Texas Instruments, <www.ti.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _SYS_PROTO_H_
 #define _SYS_PROTO_H_
 
-#include <asm/arch/omap4.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/clock.h>
 #include <asm/io.h>
+#include <asm/omap_common.h>
+#include <asm/omap_gpmc.h>
+#include <asm/arch/mux_omap4.h>
+
+DECLARE_GLOBAL_DATA_PTR;
 
+extern const struct emif_regs emif_regs_elpida_200_mhz_2cs;
+extern const struct emif_regs emif_regs_elpida_380_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_2cs;
 struct omap_sysinfo {
        char *board_string;
 };
+extern const struct omap_sysinfo sysinfo;
 
 void gpmc_init(void);
 void watchdog_init(void);
 u32 get_device_type(void);
-void invalidate_dcache(u32);
-void set_muxconf_regs(void);
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
+void set_muxconf_regs_essential(void);
+void sr32(void *, u32, u32, u32);
+u32 wait_on_value(u32, u32, void *, u32);
+void sdelay(unsigned long);
+void set_pl310_ctrl_reg(u32 val);
+void setup_clocks_for_console(void);
+void prcm_init(void);
+void bypass_dpll(u32 const base);
+void freq_update_core(void);
+u32 get_sys_clk_freq(void);
+u32 omap4_ddr_clk(void);
+void cancel_out(u32 *num, u32 *den, u32 den_limit);
+void sdram_init(void);
+u32 omap_sdram_size(void);
+u32 cortex_rev(void);
+void save_omap_boot_params(void);
+void init_omap_revision(void);
+void do_io_settings(void);
+void sri2c_init(void);
+void gpi2c_init(void);
+int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
+u32 warm_reset(void);
+void force_emif_self_refresh(void);
+void setup_warmreset_time(void);
 
-extern const struct omap_sysinfo sysinfo;
+static inline u32 running_from_sdram(void)
+{
+       u32 pc;
+       asm volatile ("mov %0, pc" : "=r" (pc));
+       return ((pc >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
+           (pc < OMAP44XX_DRAM_ADDR_SPACE_END));
+}
+
+static inline u8 uboot_loaded_by_spl(void)
+{
+       /*
+        * u-boot can be running from sdram either because of configuration
+        * Header or by SPL. If because of CH, then the romcode sets the
+        * CHSETTINGS executed bit to true in the boot parameter structure that
+        * it passes to the bootloader.This parameter is stored in the ch_flags
+        * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
+        * mandatory section if CH is present.
+        */
+       if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
+               return 0;
+       else
+               return running_from_sdram();
+}
+/*
+ * The basic hardware init of OMAP(s_init()) can happen in 4
+ * different contexts:
+ *  1. SPL running from SRAM
+ *  2. U-Boot running from FLASH
+ *  3. Non-XIP U-Boot loaded to SDRAM by SPL
+ *  4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
+ *     Configuration Header feature
+ *
+ * This function finds this context.
+ * Defining as inline may help in compiling out unused functions in SPL
+ */
+static inline u32 omap_hw_init_context(void)
+{
+#ifdef CONFIG_SPL_BUILD
+       return OMAP_INIT_CONTEXT_SPL;
+#else
+       if (uboot_loaded_by_spl())
+               return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
+       else if (running_from_sdram())
+               return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
+       else
+               return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
+#endif
+}
 
 #endif